Proform Pfevel960101 505 Zle Elliptical Users Manual 285430
2015-04-14
: Proform Proform-Pfevel960101-505-Zle-Elliptical-Users-Manual-700655 proform-pfevel960101-505-zle-elliptical-users-manual-700655 proform pdf
Open the PDF directly: View PDF .
Page Count: 28
Download | ![]() |
Open PDF In Browser | View PDF |
Model No. PFEVEL96010.1 Serial No. Write the serial number in the space above for reference. USERʼS MANUAL Serial Number Decal (on underside of frame) QUESTIONS? If you have questions, or if there are missing parts, please contact us: UK Call: 08457 089 009 From Ireland: 053 92 36102 Website: www.iconsupport.eu E-mail: csuk@iconeurope.com Write: ICON Health & Fitness, Ltd. c/o HI Group PLC Express Way Whitwood, West Yorkshire WF10 5QJ UK AUSTRALIA Call: 1-800-237-173 E-mail: australiacc@iconfitness.com CAUTION Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference. www.iconeurope.com TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 HOW TO USE THE CHEST PULSE SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 HOW TO USE THE ELLIPTICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover RECYCLING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover WARNING DECAL PLACEMENT This drawing shows the location(s) of the warning decal(s). If a decal is missing or illegible, see the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. PROFORM is a registered trademark of ICON IP, Inc. 2 IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems. 9. The elliptical should not be used by persons weighing more than 300 lbs. (136 kg). 3. It is the responsibility of the owner to ensure that all users of the elliptical are adequately informed of all precautions. 11. Hold the handlebars or the upper body arms when mounting, dismounting, or using the elliptical. 10. Wear appropriate clothes while exercising; do not wear loose clothes that could become caught on the elliptical. Always wear athletic shoes for foot protection while exercising. 2. Use the elliptical only as described in this manual. 12. The pulse sensor is not a medical device. Various factors may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general. 4. The elliptical is intended for home use only. Do not use the elliptical in a commercial, rental, or institutional setting. 5. Keep the elliptical indoors, away from moisture and dust. Do not put the elliptical in a garage or covered patio, or near water. 13. The elliptical does not have a freewheel; the pedals will continue to move until the flywheel stops. Reduce your pedaling speed in a controlled way. 6. Place the elliptical on a level surface, with at least 3 ft. (0.9 m) of clearance in the front and rear of the elliptical and 2 ft. (0.6 m) on each side. To protect the floor or carpet from damage, place a mat under the elliptical. 14. Keep your back straight while using the elliptical; do not arch your back. 15. Over exercising may result in serious injury or death. If you feel faint or if you experience pain while exercising, stop immediately and cool down. 7. Inspect and properly tighten all parts regularly. Replace any worn parts immediately. 8. Keep children under age 12 and pets away from the elliptical at all times. 3 BEFORE YOU BEGIN manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual. Thank you for selecting the revolutionary PROFORM® 505 ZLE elliptical. The 505 ZLE elliptical provides an impressive selection of features designed to make your workouts at home more effective and enjoyable. For your benefit, read this manual carefully before you use the elliptical. If you have questions after reading this manual, please see the front cover of this Before reading further, please familiarize yourself with the parts that are labeled in the drawing below. Console Handgrip Pulse Sensor Handlebar Upper Body Arm Water Bottle Holder* Length: 5 ft. 2 in. (157 cm) Width: 2 ft. 3 in. (69 cm) Weight: 176 lbs. (80 kg) Ramp Handle Pedal Wheel Ramp Roller Handle *Water bottle is not included 4 ASSEMBLY Assembly requires two persons. Place all parts of the elliptical in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires a Phillips screwdriver wrench , and a rubber mallet . , an adjustable See the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. To avoid damaging parts, do not use power tools for assembly. M8 Split Washer (83)–13 M8 Locknut (102)–4 16mm Wave Washer (54)–2 M10 Locknut (92)–2 19mm Wave Washer (66)–4 M4 x 16mm Screw (104)–10 M8 x 38mm Bolt (96)–4 M10 Washer (95)–2 M8 x 16mm Patch Screw (110)–4 M8 x 80mm Patch Screw (84)–2 M10 x 60mm Bolt (100)–2 M10 x 45mm Patch Screw (99)–4 5 M8 x 25mm Washer (98)–6 M8 x 19mm Patch Screw (82)–15 1. 1 To make assembly easier, read the information on page 5 before you begin. Attach the Front Stabilizer (6) to the Frame (1) with two M8 x 80mm Patch Screws (84). 6 84 1 2. Orient the Ramp (3) as shown. Then, insert the Ramp into the Frame (1). 2 Attach the Ramp (3) with five M8 x 19mm Patch Screws (82) and five M8 Split Washers (83). 3 3. Have a second person hold the Upright (4) near the Frame (1). 83 82 1 83 83 82 82 3 See the inset drawing. Locate the wire tie in the lower end of the Upright (4). Tie the wire tie to the Wire Harness (111). Pull the upper end of the wire tie until the Wire Harness is routed completely through the Upright. Avoid pinching the Wire Harness (111) Tip: To prevent the Wire Harness (111) from falling into the Upright (4), secure the Wire Harness with the wire tie. 4 Tip: Avoid pinching the Wire Harness (111). Slide the Upright (4) onto the Frame (1). Attach the Upright with four M8 x 19mm Patch Screws (82) and four M8 Split Washers (83). Do not tighten the Patch Screws yet. 111 6 Wire Tie 4 82 83 83 82 1 82 4. Apply a small amount of the included grease to the right Crank Arm (20) and to a 19mm Wave Washer (66). 4 Orient a Crank Arm Spacer (55) so that the flat end is facing away from the elliptical. Slide the Crank Arm Spacer and the 19mm Wave Washer (66) onto the right Crank Arm (20). 20 55 Flat End Identify the Right Roller Arm (59), which is marked with a “Right” sticker, and orient it as shown. Slide the Right Roller Arm (59) onto the right Crank Arm (20). Attach the Right Roller Arm with an M8 x 19mm Patch Screw (82), an Axle Cover (53), and an M8 x 25mm Washer (98); to avoid breaking the Axle Cover, do not overtighten the Patch Screw. Grease 66 98 59 53 82 Repeat this step for the Left Roller Arm (not shown). 5. Identify the Right Pedal Bracket (64), which is marked with a “Right” sticker. 5 Apply a small amount of grease to the inside of the tube on the Right Roller Arm (59) and to the barrel of an M10 x 60mm Bolt (100). 48 Attach the Right Pedal Bracket (64) to the Right Roller Arm (59) with the M10 x 60mm Bolt (100), an M10 Washer (95), and an M10 Locknut (92). Do not overtighten the Locknut; the Right Pedal Bracket must pivot freely. 92 95 64 100 Repeat this step for the Left Pedal Bracket (48). 59 7 Grease 6. Identify the Right Upper Body Arm (61) and the Right Upper Body Leg (60), which are marked with “Right” stickers, and orient them as shown. Make sure that the hexagonal holes are in the indicated location. 6 61 Slide the Right Upper Body Arm (61) onto the Right Upper Body Leg (60). 102 Attach the Right Upper Body Arm (61) with two M8 x 38mm Bolts (96) and two M8 Locknuts (102). Make sure that the Locknuts are in the hexagonal holes. 96 Repeat this step for the Left Upper Body Arm (not shown) and the Left Upper Body Leg (not shown). 7. Apply a small amount of grease to the Pivot Axle (35) and to a 16mm Wave Washer (54). Hexagonal Holes 60 7 Insert the Pivot Axle (35) through the Upright (4) and then center it. 4 Slide the 16mm Wave Washer (54), an Inner Arm Cover (68), and the Right Upper Body Leg (60) onto the right side of the Pivot Axle (35). 35 Repeat this step for the Left Upper Body Leg (not shown). Tighten an M8 x 19mm Patch Screw (82) and an M8 x 25mm Washer (98) into each end of the Pivot Axle (35). 8 Grease 54 68 60 98 82 8. Attach an Outer Arm Cover (67) and the Inner Arm Cover (68) around the Right Upper Body Leg (60) with two M4 x 16mm Screws (104). 8 Repeat this step for the other side of the elliptical. 104 104 68 9. Apply a small amount of grease to the axle on the Right Upper Body Leg (60) and to a 19mm Wave Washer (66). 60 67 9 Identify the Right Pedal Arm (58), which is marked with a “Right” sticker, and orient it as shown. Slide the 19mm Wave Washer (66) and the Right Pedal Arm (58) onto the Right Upper Body Leg (60). Grease 60 66 Attach the Right Pedal Arm (58) with an M8 x 19mm Patch Screw (82), an Axle Cover (53), and an M8 x 25mm Washer (98); to avoid breaking the Axle Cover, do not overtighten the Patch Screw. Repeat this step for the Left Pedal Arm (not shown). 58 9 98 53 82 10. Attach the Right Pedal Arm (58) to the Right Pedal Bracket (64) with two M10 x 45mm Patch Screws (99). 10 44 Repeat this step for the Left Pedal Arm (44). 64 58 99 11. Identify the Right Handlebar (9), which is marked with a “Right” sticker. See the inset drawing. Locate the wire tie in the Upright (4). Tie the lower end of the wire tie to the Pulse Wire (63) in the Right Handlebar (9). Next, pull the upper end of the wire tie until the Pulse Wire is routed through the Upright. 11 Avoid pinching the wires 8 Then, slide the Right Handlebar (9) onto the right side of the Upright (4). Tip: Avoid pinching the wires. Attach the Right Handlebar (9) with two M8 x 16mm Patch Screws (110) and two M8 Split Washers (83). Wire Tie 63 4 63 9 83 110 Repeat this step for the Left Handlebar (8). Tip: To prevent the Pulse Wires (63) from falling into the Upright (4), secure the Pulse Wires with the wire ties. Wire Tie 63 10 12. Attach the Water Bottle Holder (37) to the Upright (4) with two M4 x 16mm Screws (104). 12 4 104 104 37 13. Untie and discard the wire ties on the Wire Harness (111) and the Pulse Wires (63). While a second person holds the Console (7) near the Upright (4), connect the wires on the Console to the Wire Harness (111) and to the Pulse Wires (63). 13 Tip: Avoid pinching the wires. Attach the Console (7) to the Upright (4) with four M4 x 16mm Screws (104). 63 See step 3. Tighten the M8 x 19mm Patch Screws (82). If necessary, plug the Power Adapter (112) into the Plug Adapter (122). Avoid pinching the wires 111 4 Insert the excess wire downward into the Upright (4). 14. Plug the Power Adapter (112) into the receptacle on the front of the elliptical. 7 104 14 122 To plug the Power Adapter (112) into an outlet, see HOW TO PLUG IN THE POWER ADAPTER on page 13. 112 15. Make sure that all parts are properly tightened before you use the elliptical. Note: After assembly is completed, some extra parts may be left over. Place a mat beneath the elliptical to protect the floor. 11 HOW TO USE THE CHEST PULSE SENSOR HOW TO PUT ON THE CHEST PULSE SENSOR the chest pulse sensor shuts off when it is removed and the electrode areas are dried. If the chest pulse sensor is not dried after each use, the battery may be drained prematurely. The chest pulse sensor has two components: a chest strap and a sensor unit (see the drawing below). Insert the tab on one end of the chest strap into one end of the sensor unit, as shown in the inset drawing. Press the end of the sensor unit under the buckle on the chest strap. The tab should be flush with the front of the sensor unit. • Store the chest pulse sensor in a warm, dry place. Do not store the chest pulse sensor in a plastic bag or other container that may trap moisture. • Do not expose the chest pulse sensor to direct sunlight for extended periods of time or to temperatures above 122° F (50° C) or below 14° F (-10° C). Chest Strap • Do not excessively bend or stretch the sensor unit when using or storing the chest pulse sensor. • Clean the sensor unit using a damp cloth—never use alcohol, abrasives, or chemicals. Hand wash and air dry the chest pulse sensor. Tab Sensor Unit Sensor Unit TROUBLESHOOTING Buckle If the chest pulse sensor does not function properly, try the suggestions below. Next, wrap the chest pulse sensor around your chest and attach Logo the other end of the chest strap to the sensor unit. Adjust the length of the chest strap, if necessary. The chest pulse sensor should be under your clothes, tight against your skin, and as high under the pectoral muscles or breasts as is comfortable. Make sure that the logo on the sensor unit is facing forward and is rightside-up. • Make sure that you are wearing the chest pulse sensor as described at the left. Note: If the chest pulse sensor does not function when positioned as described, move it slightly lower or higher on your chest. • Use saline solution such as saliva or contact lens solution to wet the two electrode areas on the sensor unit. If heart rate readings do not appear until you begin perspiring, re-wet the electrode areas. • Position yourself near the console. For the console to display heart rate readings, the user must be within armʼs length of the console. Pull the sensor unit away from your body a few inches and locate the two electrode areas on the inner side (the electrode areas are covered by shallow ridges). Using saline solution such as saliva or contact lens solution, wet both electrode areas. Return the sensor unit to a position against your chest. • The chest pulse sensor is designed to work with people who have normal heart rhythms. Heart rate reading problems may be caused by medical conditions such as premature ventricular contractions (pvcs), tachycardia bursts, and arrhythmia. CARE AND MAINTENANCE • The operation of the chest pulse sensor can be affected by magnetic interference caused by high power lines or other sources. If it is suspected that this is a problem, try relocating the elliptical. • Dry the chest pulse sensor after each use. The chest pulse sensor is activated when you wet the electrode areas and put on the chest pulse sensor; 12 HOW TO USE THE ELLIPTICAL HOW TO PLUG IN THE POWER ADAPTER HOW TO MOVE THE ELLIPTICAL Due to the size and weight of the elliptical, moving it requires two persons. Stand in front of the elliptical, hold the upright, and place one foot against one of the front wheels. Pull on the upright and have a second person lift the handle on the ramp until the elliptical will roll on the front wheels. Carefully move the elliptical to the desired location, and then lower it to the floor. IMPORTANT: If the elliptical has been exposed to cold temperatures, allow it to warm to room temperature before plugging in the power adapter. If you do not do this, you may damage the console displays or other electronic components. Plug the power adapter into the receptacle on the frame of the elliptical. Next, plug the power adapter into the plug adapter. Plug Then, plug the Adapter Power Adapter plug adapter into an appropriate outlet that is properly installed in accordance with all local codes and ordinances. Pull on the upright Place your foot here Lift here 13 HOW TO EXERCISE ON THE ELLIPTICAL HOW TO CHANGE THE INCLINE OF THE RAMP To mount the elliptical, hold the upper body arms and step onto the pedal that is in the lower position. Then, step onto the other pedal. Push the pedals until they begin to move with a continuous motion. Note: The crank arms can turn in either direction. It is recommended that you turn the crank arms in the direction shown by the arrow; however, for variety, you can turn the crank arms in the opposite direction. To vary the motion of the pedals, you can change the incline of the ramp. To change the incline, press the latch button, pull the ramp handle, and raise or lower the ramp to the desired incline level. Then, release the latch button and engage the latch pin into one of the adjustment holes in the frame. The white line on the latch button must be visible or the latch pin is not fully engaged. Make sure that the latch pin is firmly engaged in one of the adjustment holes in the frame. Ramp Handle Crank Arm Latch Button Upper Body Arms Ramp Pedals To dismount the elliptical, wait until the pedals come to a complete stop. Note: The elliptical does not have a free wheel; the pedals will continue to move until the flywheel stops. When the pedals are stationary, step off the higher pedal first. Then, step off the lower pedal. 14 CONSOLE DIAGRAM FEATURES OF THE CONSOLE For example, lose unwanted pounds with the 8-week Weight Loss workout. iFit workouts control the resistance of the pedals while the voice of a personal trainer coaches you through your workouts. iFit cards are available separately. To purchase iFit cards, go to www.iFit.com or see the front cover of this manual. iFit cards are also available at select stores. The advanced console offers an array of features designed to make your workouts more effective and enjoyable. When you use the manual mode of the console, you can change the resistance of the pedals with the touch of a button. While you exercise, the console will display continuous exercise feedback. You can also measure your heart rate using the handgrip pulse sensor or the included chest pulse sensor. You can even connect your MP3 player or CD player to the console sound system and listen to your favorite music or audio books while you exercise. To activate the console, see page 16. To turn off the console, see page 16. To use the manual mode, see page 16. To use a preset workout, see page 18. To use an iFit workout, see page 19. To use the sound system, see page 19. To change console settings, see page 19. In addition, the console offers twenty preset workouts—six weight loss workouts and fourteen performance workouts. Each workout automatically changes the resistance of the pedals and prompts you to vary your pedaling pace as it guides you through an effective workout. Note: If there is a sheet of plastic on the display, remove the plastic. The console features the iFit interactive workout system, which enables the console to accept iFit cards containing workouts designed to help you achieve specific fitness goals. 15 HOW TO ACTIVATE THE CONSOLE 3. Change the resistance of the pedals as desired. The included power adapter must be used to operate the elliptical. See HOW TO PLUG IN THE POWER ADAPTER on page 13. When the power adapter is plugged in, the displays will light and the console will be ready for use. As you pedal, change the resistance of the pedals by pressing the Resistance increase and decrease buttons. HOW TO TURN OFF THE CONSOLE If the pedals do not move for several seconds, a tone will sound and the console will pause. Note: After you press the buttons, it will take a moment for the pedals to reach the selected resistance level. If the pedals do not move for several minutes and the buttons are not pressed, the console will turn off and the display will be reset. 4. Follow your progress with the display. The lower left display—This display can show the elapsed time and the distance (total number of revolutions) that you have pedaled. Note: When a workout is selected, the display will show the time remaining in the workout instead of the elapsed time. When you are finished exercising, unplug the power adapter. IMPORTANT: If you do not do this, the electrical components on the elliptical may wear prematurely. HOW TO USE THE MANUAL MODE 1. Begin pedaling or press any button on the console to turn on the console. The lower right display—This display can show your pedaling speed (in revolutions per minute) and the approximate number of calories that you have burned. See HOW TO ACTIVATE THE CONSOLE above. 2. Select the manual mode. Each time you turn on the console, the manual mode will be selected. If you have selected a workout, reselect the manual mode by pressing any of the Workouts buttons repeatedly until zeros appear in the display. . 16 This display also shows your heart rate when you use the handgrip pulse sensor or the included chest pulse sensor (see step 5 on page 17). The upper display—This display can show the elapsed time, the distance that you have pedaled, your pedaling speed, and the approximate number of calories you have burned. When your pulse is detected, a flashing heart symbol will appear in the display, and then your heart rate will appear. For the most accurate heart rate reading, hold the contacts for at least 15 seconds. Note: If you continue to hold the handgrip pulse sensor, the display will show your heart rate for up to 30 seconds. Press the Display button repeatedly until the upper display shows the information that you are most interested in viewing. Note: While information is shown in the upper display, the same information will not be shown in the lower left or lower right display. If the display does not show your heart rate, make sure that your hands are positioned as described. Be careful not to move your hands excessively or to squeeze the metal contacts tightly. For optimal performance, clean the metal contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts. The lower display—This display will show a track representing 640 revolutions (1/4 mile or 400 meters). As you exercise, indicators will appear in succession around the track until the entire track appears. The track will then disappear and the indicators will again begin to appear in succession. 6. Turn on the fan if desired. The fan has high and low speed settings. Press the Fan button repeatedly to select a fan speed or to turn off the fan. Note: If the pedals do not move for about thirty seconds, the fan will turn off automatically. To change the volume level of the console, press the Vol increase and decrease buttons. 7. When you are finished using the elliptical, the console will turn off automatically. 5. Measure your heart rate if desired. To use the included chest pulse sensor, see page 12. To use the handgrip pulse sensor, follow the instructions below. IMPORTANT: If you wear the chest pulse sensor and hold the handgrip pulse sensor at the same time, the console will not display your heart rate accurately. See HOW TO TURN OFF THE CONSOLE on page 16. If there are sheets of plastic Contacts on the metal contacts on the handgrip pulse sensor, remove the plastic. To measure your heart rate, hold the handgrip pulse sensor with your palms resting against the metal contacts. Avoid moving your hands or gripping the contacts tightly. 17 HOW TO USE A PRESET WORKOUT As you exercise, keep your pedaling speed near the target speed for the current segment. At the beginning of each segment, the target speed for the segment will flash in the display. 1. Begin pedaling or press any button on the console to turn on the console. See HOW TO ACTIVATE THE CONSOLE on page 16. 2. Select a preset workout. To select a preset workout, press the Performance Workouts button or the Weight Loss Workouts button repeatedly until the name of the desired workout appears in the display. IMPORTANT: The target speed is intended only to provide motivation. Your actual pedaling speed may be slower than the target speed. Make sure to pedal at a speed that is comfortable for you. If the resistance level for the current segment is too high or too low, you can manually override the setting by pressing the Resistance buttons. IMPORTANT: When the current segment of the workout ends, the pedals will automatically adjust to the resistance level programmed for the next segment. Profile The workout duration, the maximum speed, and a profile of the resistance levels will also appear in the display. The workout will continue in this way until the last segment ends. To stop the workout at any time, stop pedaling. A tone will sound and the time will stop counting. To restart the workout, simply resume pedaling. 3. Begin pedaling to start the workout. Each workout is divided into 20, 30 or 45 oneminute segments. One resistance level and one target speed is programmed for each segment. Note: The same resistance level and/or target speed may be programmed for consecutive segments. 4. Follow your progress with the display. See step 4 on pages 16 and 17. 5. Measure your heart rate if desired. The resistance level for the first segment will appear in the display and the target speed for the first segment will flash in the display for a few seconds. See step 5 on page 17. 6. Turn on the fan if desired. See step 6 on page 17. During the workout, the workout profile will show your progress (see the drawing above). The flashing segment of the profile represents the current segment of the workout. The height of the flashing segment indicates the resistance level for the current segment. 7. When you are finished using the elliptical, the console will turn off automatically. See HOW TO TURN OFF THE CONSOLE on page 16. At the end of each segment of the workout, a series of tones will sound and the next segment of the profile will begin to flash. If a different resistance level and/or target speed is programmed for the next segment, the resistance level and/or target speed will appear in the display for a few seconds to alert you. The resistance of the pedals will then change. 18 HOW TO USE AN IFIT WORKOUT HOW TO USE THE SOUND SYSTEM iFit cards are available separately. To purchase iFit cards, go to www.iFit.com or see the front cover of this manual. iFit cards are also available at select stores. To play music or audio books through the console sound system while you exercise, plug the included audio cable into the jack on the console and into a jack on your MP3 player or CD player; make sure that the audio cable is fully plugged in. 1. Begin pedaling or press any button on the console to turn on the console. Next, press the play button on your MP3 player or CD player. Adjust the volume level using the volume control on your MP3 player or CD player. See HOW TO ACTIVATE THE CONSOLE on page 16. 2. Insert an iFit card and select a workout. HOW TO CHANGE CONSOLE SETTINGS To use an iFit workout, insert an iFit card into the iFit slot located on the side of the console; make sure that the iFit card is oriented so that the metal contacts are face down and are facing the slot. When the iFit card is properly inserted, the indicator next to the slot will light and text will appear in the display. iFit Slot The console features a user mode that allows you to select a backlight option for the console and to view console usage information. To select the user mode, press and hold down the Display button for a few seconds until the user mode information appears in the display. The console has three backlight options. The ON option keeps the backlight on while the console is on. The AUTO option keeps the backlight on only while you are pedaling. The OFF option turns the backlight off. iFit Card Next, select the desired workout on the iFit card by pressing the increase and decrease buttons next to the iFit slot. The upper display will show the currently selected backlight option. Press the Resistance increase button repeatedly to select the desired backlight option. A moment after you select a workout, the voice of a personal trainer will begin guiding you through your workout. The lower left display will show the total number of hours that the console has been used since the elliptical was purchased. iFit workouts function in the same way as preset workouts. To use the workout, see steps 3 to 7 on page 18. Press the Display button to save the console settings and exit the user mode. 3. When you are finished exercising, remove the iFit card. Remove the iFit card when you are finished exercising. Store the iFit card in a secure place. 19 MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the elliptical regularly. Replace any worn parts immediately. Locate and loosen the Idler Bolt (120). Next, tighten the Belt Adjustment Screw (88) until the Drive Belt (not shown) is tight. Then, retighten the Idler Bolt. To clean the elliptical, use a damp cloth and a small amount of mild soap. IMPORTANT: To avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight. CONSOLE TROUBLESHOOTING If the console does not display your heart rate when you hold the handgrip pulse sensor, or if the displayed heart rate appears to be too high or too low, see step 5 on page 17. If the console does not display your heart rate when you use the chest pulse sensor, see TROUBLESHOOTING on page 12. 120 88 HOW TO ADJUST THE DRIVE BELT If the pedals slip while you are pedaling, even while the resistance is adjusted to the highest level, the drive belt may need to be adjusted. To adjust the drive belt, first use a flat screwdriver to rotate the right Disc (71) counterclockwise. Then, remove the right Disc from the right Disc Mount (72). Reattach the right disc by rotating it clockwise into the right disc mount. 71 72 20 HOW TO ADJUST THE REED SWITCH Slide the Reed Switch (38) slightly closer to or away from the Magnet (43). Then, retighten the Reed Switch Screw. Turn the Pulley (19) for a moment. Repeat these actions until the console displays correct feedback. If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, first use a flat screwdriver to rotate the left disc counterclockwise. Then, remove the left disc from the left disc mount. Reattach the left disc by rotating it clockwise into the left disc mount. HOW TO GREASE THE ROLLERS Next, locate the Reed Switch (38). Turn the Pulley (19) until one of the Magnets (43) on the Pulley is aligned with the Reed Switch. Loosen, but do not remove, the M4 x 16mm Reed Switch Screw (69). See the EXPLODED DRAWING near the end of this manual. If the Rollers (51) squeak when moving on the Ramp (3), apply a small amount of white marine grease equally to each Roller. Spread the grease evenly around the Rollers. Pedal the elliptical until a thin film of grease is distributed along the Ramp; then, wipe off any excess grease. 19 43 69 38 21 EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone. For maximum fat burning, exercise with your heart rate near the middle number in your training zone. Before beginning this or any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems. The pulse sensor is not a medical device. Various factors may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general. Aerobic Exercise—If your goal is to strengthen your cardiovascular system, you must perform aerobic exercise, which is activity that requires large amounts of oxygen for prolonged periods of time. For aerobic exercise, adjust the intensity of your exercise until your heart rate is near the highest number in your training zone. These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results. WORKOUT GUIDELINES EXERCISE INTENSITY Warming Up—Start with 5 to 10 minutes of stretching and light exercise. A warm-up increases your body temperature, heart rate, and circulation in preparation for exercise. Whether your goal is to burn fat or to strengthen your cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your heart rate as a guide to find the proper intensity level. The chart below shows recommended heart rates for fat burning and aerobic exercise. Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During the first few weeks of your exercise program, do not keep your heart rate in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exercise–never hold your breath. Cooling Down—Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles and helps to prevent post-exercise problems. EXERCISE FREQUENCY To find the proper intensity level, find your age at the bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your age define your “training zone.” The lowest number is the heart rate for fat burning, the middle number is the heart rate for maximum fat burning, and the highest number is the heart rate for aerobic exercise. To maintain or improve your condition, complete three workouts each week, with at least one day of rest between workouts. After a few months of regular exercise, you may complete up to five workouts each week, if desired. Remember, the key to success is to make exercise a regular and enjoyable part of your everyday life. 22 PART LIST Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 1 1 1 1 3 1 1 1 1 1 1 1 1 1 4 1 1 1 1 2 8 1 1 1 1 1 1 1 1 4 1 2 1 2 1 4 1 1 1 6 2 4 2 1 1 1 1 1 1 1 Description Key No. Qty. Frame Base Ramp Upright M4 x 19mm Screw Front Stabilizer Console Left Handlebar Right Handlebar Track Cover Left Latch Cover Right Latch Cover Latch Button Latch Cable Cable Pulley Latch Spring Latch Pin Crank Pulley Crank Arm M4 x 16mm Flange Screw Idler C-magnet Bracket Motor Bracket Resistance Motor Adjustment Assembly Resistance Disc Flywheel Flywheel Axle Stabilizer Bushing Stabilizer Axle Stabilizer Cap Foot Wheel Pivot Axle Pivot Bushing Water Bottle Holder Reed Switch Clamp R12 Bearing Flywheel Bearing Snap Ring Magnet Left Pedal Arm Left Roller Arm Left Upper Body Leg Left Upper Body Arm Left Pedal Bracket Left Pedal Left Pedal Insert 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 23 2 2 8 2 2 2 4 1 1 1 1 2 2 1 6 4 2 2 1 2 2 2 1 1 1 4 2 2 1 3 2 15 13 2 2 2 4 1 1 1 2 2 4 1 2 4 8 8 4 2 Model No. PFEVEL96010.1 R0311B Description Roller Pedal Arm Cap Axle Cover 16mm Wave Washer Crank Arm Spacer Pedal Bracket Spacer Pedal Arm Bushing Right Pedal Arm Right Roller Arm Right Upper Body Leg Right Upper Body Arm Arm Cap Pulse Sensor Assembly/Wire Right Pedal Bracket M6 x 25mm Flat Head Screw 19mm Wave Washer Outer Arm Cover Inner Arm Cover M4 x 16mm Reed Switch Screw Inner Pivot Bushing Disc Disc Mount Left Shield Right Shield Shield Cover V-clip Roller Spacer Key Adjustment Lock M6 Washer M10 Shoulder Screw M8 x 19mm Patch Screw M8 Split Washer M8 x 80mm Patch Screw M4 x 14mm Hex Patch Screw M8 x 55mm Hex Bolt M8 x 13mm Screw Belt Adjustment Screw M5 x 7mm Screw C-magnet Bracket Bolt M8 Jam Nut M10 Locknut Resistance Motor Screw M6 Locknut M10 Washer M8 x 38mm Bolt M8 x 19mm Patch Screw M8 x 25mm Washer M10 x 45mm Patch Screw M10 x 60mm Bolt Key No. Qty. 101 102 103 104 105 106 107 108 109 110 111 112 113 114 2 6 1 16 2 2 4 10 1 4 1 1 1 2 Description Key No. Qty. M8 x 20mm Washer M8 Locknut Pivot Screw M4 x 16mm Screw Pedal Pad Motor Bracket Screw Roller Arm Bushing M6 x 13mm Screw Power Receptacle/Wire M8 x 16mm Patch Screw Wire Harness Power Adapter Drive Belt Foam Grip 115 116 117 118 119 120 121 122 123 124 * * * 1 1 2 2 1 1 1 1 1 1 – – – Description Right Pedal Right Pedal Insert Pulse Wire Upper Bushing M3.5 x 12mm Screw Idler Bolt Audio Cable Plug Adapter Small Snap Ring M5 Washer Assembly Tool Grease Packet Userʼs Manual Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated. 24 EXPLODED DRAWING A 108 78 102 80 90 42 85 86 91 40 39 42 83 82 29 83 82 97 93 23 41 41 30 117 84 34 109 123 24 124 86 113 83 110 104 82 80 11 15 36 83 82 108 15 12 14 16 3 97 25 32 21 21 122 13 33 98 82 112 10 31 9 83 78 5 63 4 36 102 111 91 110 104 85 104 83 37 20 18 106 27 119 26 89 35 81 19 103 7 8 6 43 79 2 98 30 88 25 120 94 63 87 43 80 28 32 69 38 40 22 83 83 34 81 20 1 82 121 Model No. PFEVEL96010.1 R0311B 21 21 17 EXPLODED DRAWING B 62 71 75 Model No. PFEVEL96010.1 R0311B 65 72 104 65 114 76 65 104 67 102 47 82 96 53 98 82 98 57 118 57 104 46 66 70 42 49 50 108 97 53 98 45 100 48 26 77 95 92 51 101 54 97 40 107 68 104 107 40 66 56 53 36 53 82 105 52 73 76 44 99 76 97 55 EXPLODED DRAWING C Model No. PFEVEL96010.1 R0311B 62 61 102 104 114 74 72 104 65 65 96 104 104 68 115 55 116 66 105 40 107 54 65 36 70 60 107 59 64 97 108 101 92 51 77 118 40 98 97 53 53 82 58 95 56 100 53 97 99 52 27 98 71 82 67 42 66 57 57 98 53 82 ORDERING REPLACEMENT PARTS To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) • the name of the product (see the front cover of this manual) • the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING near the end of this manual) RECYCLING INFORMATION This electronic product must not be disposed of in municipal waste. To preserve the environment, this product must be recycled after its useful life as required by law. Please use recycling facilities that are authorized to collect this type of waste in your area. In doing so, you will help to conserve natural resources and improve European standards of environmental protection. If you require more information about safe and correct disposal methods, please contact your local city office or the establishment where you purchased this product. Part No. 307592 R0311B Printed in China © 2011 ICON IP, Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 28 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:7d91cde4-60a1-11e0-b264-001f5b3daaf4 Producer : QuarkXPress(R) 7.31 X Press Private : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments Modify Date : 2011:04:06 16:59:13-06:00 Create Date : 2011:04:06 16:08:26Z Creator Tool : QuarkXPress(R) 7.31 Metadata Date : 2011:04:06 16:59:13-06:00 Document ID : uuid:ecd241da-60a0-11e0-b264-001f5b3daaf4 Format : application/pdf Title : 285430 Creator : QuarkXPress(R) 7.31EXIF Metadata provided by EXIF.tools