Proform Pftl130110 Pro 2000 Treadmill Users Manual
2015-04-14
: Proform Proform-Pftl130110-Pro-2000-Treadmill-Users-Manual-701486 proform-pftl130110-pro-2000-treadmill-users-manual-701486 proform pdf
Open the PDF directly: View PDF 
.
Page Count: 36
| Download | |
| Open PDF In Browser | View PDF |
www.proform.com Model No. PFTL13011.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care. IMPORTANT: Please register this product (see the limited warranty on the back cover of this manual) before contacting Customer Care. CALL TOLL-FREE: 1-888-533-1333 Mon.–Fri. 6 a.m.–6 p.m. MT Sat. 8 a.m.–4 p.m. MT ON THE WEB: www.proformservice.com CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. USER’S MANUAL TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 THE CHEST HEART RATE MONITOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover WARNING DECAL PLACEMENT This drawing shows the locations of the warning decals. If a decal is missing or illegible, call the telephone number on the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decals may not be shown at actual size. PROFORM is a registered trademark of ICON IP, Inc. 2 IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems. other electrical devices, except for low-power devices such as cell phone chargers, into the surge suppressor or into an outlet on the same circuit. 2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 12. Use only a surge suppressor that meets all of the specifications described on page 16. To purchase a surge suppressor, see your local PROFORM dealer, call the telephone number on the front cover of this manual, or see your local electronics store. 3. Use the treadmill only as described. 4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near water. 13. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may slow, accelerate, or stop unexpectedly, which may result in a fall and serious injury. 5. Place the treadmill on a level surface, with at least 8 ft. (2.4 m) of clearance behind it and 2 ft. (0.6 m) on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill. 14. Keep the power cord and the surge suppressor away from heated surfaces. 6. Do not operate the treadmill where aerosol products are used or where oxygen is being administered. 15. Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See TROUBLESHOOTING on page 26 if the treadmill is not working properly.) 7. Keep children under age 12 and pets away from the treadmill at all times. 8. The treadmill should be used only by persons weighing 375 lbs. (170 kg) or less. 16. Read, understand, and test the emergency stop procedure before using the treadmill (see HOW TO TURN ON THE POWER on page 18). 9. Never allow more than one person on the treadmill at a time. 17. Never start the treadmill while you are standing on the walking belt. Always hold the handrails while using the treadmill. 10. Wear appropriate exercise clothes while using the treadmill. Do not wear loose clothes that could become caught in the treadmill. Athletic support clothes are recommended for both men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals. 18. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed. 19. The heart rate monitor is not a medical device. Various factors, including the user’s movement, may affect the accuracy of heart rate readings. The heart rate monitor is intended only as an exercise aid in determining heart rate trends in general. 11. Plug the power cord into a surge suppressor (not included), and plug the surge suppressor into an appropriate outlet (see page 16). To avoid overloading the circuit, do not plug 3 20. Never leave the treadmill unattended while it is running. Always remove the key, unplug the power cord, and press the power switch into the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the power switch.) 25. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only. 21. Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 7, and HOW TO FOLD AND MOVE THE TREADMILL on page 25.) You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 26. This treadmill is intended for in-home use only. Do not use this treadmill in a commercial, rental, or institutional setting. 22. When folding or moving the treadmill, make sure that the storage latch is holding the frame securely in the storage position. 27. Over exercising may result in serious injury or death. If you feel faint or if you experience pain while exercising, stop immediately and cool down. 23. Never insert any object into any opening on the treadmill. 24. Inspect and properly tighten all parts of the treadmill regularly. SAVE THESE INSTRUCTIONS 4 BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM® PRO 2000 treadmill. The PRO 2000 treadmill offers an impressive selection of features designed to make your workouts at home more enjoyable and effective. And when you’re not exercising, the unique treadmill can be folded up, requiring less than half the oor space of other treadmills. reading this manual, please see the front cover of this manual. To help us assist you, please note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual. Before reading further, please review the drawing below and familiarize yourself with the labeled parts. For your benet, read this manual carefully before using the treadmill. If you have questions after Length: 6 ft. 8 in. (203 cm) Width: 3 ft. (91 cm) Console Handrail Heart Rate Monitor Tray Upright Key/Clip Power Switch Walking Belt Foot Rail Power Cord Platform Cushion Idler Roller Adjustment Screws 5 PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached. Extra hardware may be included. #10 Star Washer (11)–4 #8 x 1/2" Screw (1)–6 3/8" x 1 1/4" Screw (9)–4 3/8" Star Washer (14)–4 #8 x 1/2" Ground Screw (10)–1 3/8" Nut (13)–2 #8 x 3/4" Screw (2)–12 3/8" x 1 3/4" Bolt (7)–1 3/8" x 2 3/4" Screw (8)–4 6 #10 x 3/4" Screw (3)–4 3/8" x 2" Bolt (5)–1 ASSEMBLY • To hire a service technician to assemble this product in your home, call 1-800-445-2480. • To identify small parts, see page 6. • Assembly requires the following tools: • Assembly requires two persons. the included hex keys • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish assembly. one adjustable wrench one Phillips screwdriver • After shipping, there may be an oily substance on the exterior of the treadmill or on the shipping carton. This is normal. If there is an oily substance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner. To avoid damaging parts, do not use power tools. 1. Make sure that the power cord is unplugged. 1 Attach the Left Wheel Cap (103) to the Base (105) with two #8 x 3/4" Screws (2). Attach the Right Wheel Cap (not shown) to the right side of the Base (105) in the same way. 105 2 103 7 2. Pull the Upright Wire (88) and the Base Ground Wire (100) through the indicated hole in the Base (105). 2 Attach the Base Ground Wire (100) to the Base (105) with a #8 x 1/2" Ground Screw (10). Press the Grommet (101) into the square hole in the Base (105). 101 Hole 88 100 10 3. Identify the Left Upright (90), which is marked “Left.” Have a second person hold the Left Upright near the Base (105). 105 3 88 90 See the inset drawing. Tie the wire tie in the Left Upright (90) securely around the end of the Upright Wire (88). Then, pull the other end of the wire tie until the Upright Wire is routed through the Left Upright. Wire Tie Wire Tie 90 88 8 105 88 4. Hold the Left Upright (90) against the Base (105). Be careful not to pinch the wires. If necessary, position the Base Ground Wire (100) in the hole in the side of the Left Upright. Insert two 3/8" x 2 3/4" Screws (8) and two 3/8" x 1 1/4" Screws (9) with two 3/8" Star Washers (14) into the Left Upright. 4 Partially tighten the 3/8" x 2 3/4" Screws (8) and the 3/8" x 1 1/4" Screws (9) until the heads of the Screws touch the Left Upright (90); do not fully tighten the Screws yet. Note: It may be helpful to use the Short Hex Key (43) on the Screw shown. 90 8 43 Attach the Right Upright (not shown) in the same way. Note: There are no wires on the right side. Hole 14 100 9 5. Identify the Left and Right Base Covers (96, 97). 14 105 5 Slide the Left Base Cover (96) onto the Left Upright (90). Slide the Right Base Cover (97) onto the Right Upright (99). Do not press the Base Covers into place yet. 99 90 96 9 97 6. Remove the four 3/8" x 1" Screws (6) and 3/8" Star Washers (14) from the Handrail Brackets (89). Then, remove the Handrail Brackets from the Left and Right Handrails (92, 93). The Screws and Star Washers will be used in step 8. 6 6 14 89 6 14 6 14 93 89 6 14 92 7. Remove the four 3/8" x 1" Flat Head Screws (15) and 3/8" Star Washers (14) from the Left and Right Uprights (90, 99). 7 Hole 15 89 Orient the Handrail Brackets (89) so that the indicated holes are in the positions shown. Insert the Upright Wire (88) through the left Handrail Bracket. 14 Hole 88 Attach the Handrail Brackets (89) to the Uprights (90, 99) with the four 3/8" x 1" Flat Head Screws (15) and 3/8" Star Washers (14) that you just removed. Tighten the Screws. 15 14 99 89 90 8. Identify the Left and Right Handrails (92, 93). 8 93 Hold the Left Handrail (92) near the Left Upright (90). Insert the Upright Wire (88) into the large hole in the bottom of the Left Handrail and out of the back of the Left Handrail. 89 14 6 Slide the Left Handrail (92) onto the left Handrail Bracket (89), and attach the Left Handrail with two of the 3/8" x 1" Screws (6) and 3/8" Star Washers (14) that you removed in step 6. Do not tighten the Screws yet. 92 88 14 6 14 99 Attach the Right Handrail (93) as described above. Note: There is not a wire in the Right Upright (99). 6 89 14 90 10 6 9. Remove and discard the #10 x 3/4" Screws (3) from the Right Handrail (93) and the Left Handrail (not shown). 9 93 Pulse Wire 3 Hold the pulse assembly near the Right Handrail (93). Insert the pulse wire from the pulse assembly into the hole in the side of the Right Handrail and pull it out of the end of the Right Handrail as shown. Pulse Assembly Flap Hole 10. Slide the pulse assembly onto the Left and Right Handrails (92, 93). Make sure that the brackets on the pulse assembly are ush against the rubber on the Handrails. Note: The ap on each handrail (see drawing in step 9) should slide under the bracket. Be careful not to pinch the pulse wire against the pulse assembly. 10 93 Pulse Wire 3 11 Pulse Assembly 92 11 3 Attach the pulse assembly with four #10 x 3/4" Screws (3) and four #10 Star Washers (11). Start all four Screws, and then tighten them. 11. Set the console assembly face down on a soft surface to avoid scratching the console assembly. 11 1 1 1 Identify the Left and Right Trays (110, 111). 111 110 Attach the Trays (110, 111) to the console assembly with six #8 x 1/2" Screws (1). Start all six Screws, and then tighten them. Be careful not to overtighten the Screws. 4 12 1 4 12 Remove the four 5/16" x 5/8" Screws (4) and 5/16" Star Washers (12) from the console assembly. They will be used in step 13. Console Assembly 11 12. With the help of a second person, hold the console assembly near the Uprights (90, 99). 12 Console Assembly Connect the Upright Wire (88) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. 88 Pulse Wires Next, connect the two pulse wires. Then, remove the wire tie from the Upright Wire (88). Console Wire Pulse Bar Assembly 99 Wire Tie 90 Console Wire 88 13. Insert the pulse wires and the Upright Wire (not shown) into the Handrails (92, 93) as you set the console assembly on the Handrails. 13 Attach the console assembly with the four 5/16" x 5/8" Screws (4) and four 5/16" Star Washers (12) that you removed in step 11. Start all four Screws, and then tighten them. 92 93 Tighten the four 3/8" x 1" Screws (6). 12 4 12 6 Console Assembly 12 4 6 14. Attach a Tray Bracket (91) to the side of the Right Upright (99) with two #8 x 3/4" Screws (2). Make sure to use the two holes shown. Start both Screws, and then tighten them. 14 87 Attach the other Tray Bracket (not shown) to the Left Upright (not shown) in the same way. 91 Attach the Tray (87) to the Tray Brackets (91) with four #8 x 3/4" Screws (2) (only one side is shown). Start all four Screws, and then tighten them. 2 99 15. Tighten the four 3/8" x 2 3/4" Screws (8), and then tighten the four 3/8" x 1 1/4" Screws (9) (only one side is shown). 15 97 Press the Left and Right Base Covers (96, 97) onto the Base (105) until they snap into place. 96 8 9 105 16. Raise the Frame (64) to the position shown. Have a second person hold the Frame until this step is completed. 16 64 Orient the Storage Latch (65) so that the large barrel and the latch knob are in the positions shown. Attach the lower end of the Storage Latch (65) to the Base (105) with a 3/8" x 2" Bolt (5) and a 3/8" Nut (13). 105 13 5 Latch Knob 65 Large Barrel 13 17. Attach the upper end of the Storage Latch (65) to the Frame (64) with a 3/8" x 1 3/4" Bolt (7) and a 3/8" Nut (13). 17 64 13 7 65 18. Lower the Frame (64) (see HOW TO LOWER THE TREADMILL FOR USE on page 25). 18 If one of the Rear Leveling Feet (69) doesn’t sit at on the oor, turn the Rear Leveling Foot until it does, and then tighten the 1/2" Rear Leveling Foot Nut (41) against the Frame (64). Make sure that both 1/2" Rear Leveling Foot Nuts are tightened against the Frame. 64 69 41 19. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the oor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 27 and 28). 14 THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR The heart rate monitor consists of a chest strap and a sensor. Insert the tab on one end of the chest strap into the hole in one end of the sensor as shown. Then, press the end of the sensor under the buckle on the chest strap. The tab should be flush with the front of the sensor. Tabs • Do not expose the heart rate monitor to direct sunlight for extended periods of time; do not expose it to temperatures above 122° F (50° C) or below 14° F (-10° C). Chest Strap • Do not excessively bend or stretch the sensor when using or storing the heart rate monitor. • To clean the sensor, use a damp cloth and a small amount of mild soap. Then, wipe the sensor with a damp cloth and thoroughly dry it with a soft towel. Never use alcohol, abrasives, or chemicals to clean the sensor. Hand wash and air dry the chest strap. Sensor Tab Sensor Buckle The heart rate monitor must be worn under your clothes, tight against your skin. Wrap the heart rate monitor around your chest in the location shown. Make sure that the logo is rightside-up. Then, attach the other end of the chest strap to the sensor. Adjust the length of the chest strap, if necessary. TROUBLESHOOTING If the heart rate monitor does not function properly, try the steps below. • Make sure that you are wearing the heart rate monitor as described at the left. If the heart rate monitor does not function when positioned as described, move it slightly lower or higher on your chest. • If heart rate readings are not displayed until you begin perspiring, rewet the electrode areas. • For the console to display heart rate readings, you must be within arm’s length of the console. • If there is a battery cover on the back of the sensor, replace the battery with a new battery of the same type. Pull the sensor away from your body a few inches and locate the two electrode areas, which are covered by shallow ridges. Using saline solution such as saliva or contact lens solution, wet the electrode areas. Then, return the sensor to a position against your chest. • The heart rate monitor is designed to work with people who have normal heart rhythms. Heart rate reading problems may be caused by medical conditions such as premature ventricular contractions (pvcs), tachycardia bursts, and arrhythmia. CARE AND MAINTENANCE • Thoroughly dry the sensor with a soft towel after each use. Moisture may keep the sensor activated, shortening the life of the battery. • The operation of the heart rate monitor can be affected by magnetic interference from high power lines or other sources. If you suspect that magnetic interference is causing a problem, try relocating the fitness equipment. • Store the heart rate monitor in a warm, dry place. Do not store the heart rate monitor in a plastic bag or other container that may trap moisture. 15 OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do not plug other electrical devices, except for lowpower devices such as cell phone chargers, into the surge suppressor or into an outlet on the same circuit. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets and may not be compatible with AFCI-equipped outlets. Use a Surge Suppressor Your treadmill, like other electronic equipment, can be damaged by sudden voltage changes in your home’s power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances being turned on or off. To decrease the risk of damaging the treadmill, always use a surge suppressor with the treadmill. To purchase a surge suppressor, see precaution 12 on page 3. 1 Grounded Outlet Grounding Pin Use only a surge suppressor that is UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must also be electrically rated for 120 volts AC and 15 amps. There must be a monitoring light on the surge suppressor to indicate whether it is functioning properly. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill and serious injury to users. Grounding Pin Surge Suppressor Plug in the Power Cord A temporary adapter may be used to connect the surge suppressor to a 2-pole receptacle if a properly grounded outlet is not available. The treadmill must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. The treadmill power cord has a plug with a grounding pin (see drawing 1 on this page). DANGER: Improper connection of the power cord increases the risk of electric shock. Do not modify the plug—if it will not fit an outlet, have a proper outlet installed by a qualified electrician. If you are unsure whether the treadmill is properly grounded, contact a qualified electrician. 2 2-pole Receptacle Adapter Lug Metal Screw The lug or wire extending from the adapter must be connected with a metal screw to a permanent ground such as a properly grounded outlet box cover. Some 2-pole receptacle outlet box covers are not grounded. Before using an adapter, contact a qualified electrician to determine whether the outlet box cover is grounded. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. The outlet must be on a 16 CONSOLE DIAGRAM FEATURES OF THE CONSOLE users, and access many other features. To purchase an iFit Live module at any time, go to www.iFit.com or call the telephone number on the front cover of this manual. The treadmill console offers an impressive array of features designed to make your workouts more effective and enjoyable. When you use the manual mode, you can change the speed and incline of the treadmill with the touch of a button. As you exercise, the console will display instant exercise feedback. You can even measure your heart rate using the handgrip heart rate monitor or the chest heart rate monitor. You can even listen to your favorite workout music or audio books with the console’s stereo sound system while you exercise. To turn on the power, see page 18. To use the manual mode, see page 18. To use an onboard workout, see page 21. To use an iFit Live workout, see page 22. To use the cool-down mode, see page 23. To use the stereo sound system, see page 23. To use the information mode, see page 24. In addition, the console features twenty-four onboard workouts—six calorie workouts, six high-intensity (combined speed and incline) workouts, six speed workouts, and six incline workouts. Each workout automatically controls the treadmill as it guides you through an effective exercise session. IMPORTANT: If there are sheets of plastic on the console, remove the plastic. To prevent damage to the walking platform, wear clean athletic shoes while using the treadmill. The rst time you use the treadmill, observe the alignment of the walking belt, and center the walking belt if necessary (see page 28). The console also features a revolutionary iFit Live mode that enables the treadmill to communicate with your wireless network through an optional iFit Live module. With the iFit Live mode, you can download personalized workouts, create your own workouts, track your workout results, race against other iFit Live 17 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room temperature before turning on the power. If you do not do this, you may damage the console displays or other electrical components. 1. Insert the key into the console. Plug in the power cord (see page 16). Next, locate the power switch on the treadmill frame near the power cord. Press the power switch into the reset position. See HOW TO TURN ON THE POWER at the left. 2. Select the manual mode. If the manual mode is not selected, press the Manual button on the console. Reset 3. Start the walking belt. To start the walking belt, press the Start button, the Speed increase button, or one of the numbered Quick Speed buttons. IMPORTANT: The console features a display demo mode, designed to be used if the treadmill is displayed in a store. If the displays light as soon as you plug in the power cord and press the power switch into the reset position, the demo mode is turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the displays remain lit, see THE INFORMATION MODE on page 24 to turn off the demo mode. If you press the Start button or the Speed increase button, the walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed increase and decrease buttons. Each time you press one of the buttons, the speed setting will change by 0.1 mph; if you hold down the button, the speed setting will change in increments of 0.5 mph. Note: After you press the button, it may take a moment for the walking belt to reach the selected speed setting. Next, stand on the foot rails of the treadmill. Find the Clip clip attached to the Key key and slide the clip onto the waistband of your clothes. Then, insert the key into the console. After a moment, the displays will light. IMPORTANT: In an emergency, the key can be pulled from the console, causing the walking belt to slow to a stop. Test the clip by carefully taking a few steps backward; if the key is not pulled from the console, adjust the position of the clip. If you press one of the numbered Quick Speed buttons, the walking belt will gradually change speed until it reaches the selected speed setting. To select a speed setting that includes a decimal—such as 3.5 mph—press two numbered buttons in succession. For example, to select a speed setting of 3.5 mph, press the 3 button and then immediately press the 5 button. To stop the walking belt, press the Stop button. The time will begin to ash in the display. To restart the walking belt, press the Start button or the Speed increase button. Note: The console can display speed and distance in either miles or kilometers. To nd which unit of measurement is selected, see THE INFORMATION MODE on page 24. For simplicity, all instructions in this manual refer to miles. 18 4. Change the incline of the treadmill as desired. The Incline tab will show a prole of the incline settings of the workout. A new segment will appear at the end of each minute. The Speed tab will show a prole of the speed settings of the workout. To change the incline of the treadmill, press the Incline increase or decrease button or one of the numbered Quick Incline/Decline buttons. Each time you press one of the buttons, the treadmill will gradually adjust to the selected incline setting. The My Trail tab will show a track that represents 1/4 mile (400 m). As you exercise, the ashing rectangle will show your progress. The My Trail tab will also show the number of laps you complete. Your treadmill walking belt has been embedded with a high-performance lifetime lubricant to reduce friction, extend life, and reduce power consumption. This special lubricant requires a break-in period to achieve optimal performance. During the rst 20 hours of operation, use the treadmill at low incline settings. The Calorie tab will show the approximate amount of calories you have burned. The height of each segment represents the amount of calories burned during that segment. As you exercise, the workout intensity level bar will indicate the approximate intensity level of your exercise. 5. Follow your progress with the displays. As you walk or run on the treadmill, the display can show the following workout information: • The elapsed time • The distance that you have walked or run • The workout intensity bar Press the Home button to return to the default menu (see THE INFORMATION MODE on page 24 to set the default menu). If necessary, press the Home button again. • The approximate number of calories you have burned • The incline level of the treadmill When a wireless iFit Live module is connected, the wireless symbol at the top of the display will show the strength of your wireless signal. Four arcs indicate full signal strength. • The number of vertical feet you have climbed • The speed of the walking belt • Your heart rate (see step 6 on page 20) • The matrix To reset the displays, press the Stop button, remove the key, and then reinsert the key. The matrix offers several display tabs. Press the increase and decrease button next to the Enter button until the desired tab is shown. 19 6. Measure your heart rate if desired. 7. Turn on the fan if desired. Note: If you use the handgrip heart rate monitor and the chest heart rate monitor at the same time, the console will not display your heart rate accurately. For information about the chest heart rate monitor, see page 15. The fan features several speed settings. Press the Fan increase or decrease button to select a fan speed or to turn off the fan. Note: If the fan is on when the walking belt is stopped, the fan will turn off automatically after a few minutes. Before using the handgrip heart rate monitor, remove the sheets of plastic from the Contacts metal contacts on the pulse bar. In addition, make sure that your hands are clean. 8. When you are nished exercising, remove the key from the console. Step onto the foot rails, press the Stop button, and adjust the incline of the treadmill to zero percent. The incline must be at zero percent or you may damage the treadmill when you fold it to the storage position. Next, remove the key from the console and put it in a secure place. When you are nished using the treadmill, press the power switch into the off position and unplug the power cord. IMPORTANT: If you do not do this, the treadmill’s electrical components may wear prematurely. To measure your heart rate, stand on the foot rails and hold the pulse bar with your palms on the metal contacts; avoid moving your hands. When your pulse is detected, your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds. 20 HOW TO USE AN ONBOARD WORKOUT and/or incline settings will appear in the display for a few seconds and the treadmill will automatically adjust to the new speed and/or incline setting. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 18. The workout will continue in this way until the last segment of the prole ashes in the display and the last segment ends. The walking belt will then slow to a stop. 2. Select an onboard workout. To select an onboard workout, press the Calorie button, the Intensity button, the Speed button, or the Incline button repeatedly until the desired workout appears in the display. Note: The calorie goal is an estimate of the number of calories that you will burn during the workout. The actual number of calories that you burn will depend on your metabolic rate. In addition, if you manually change the speed or incline of the treadmill during the workout, the number of calories you burn will be affected. When you select an onboard workout, the display will show the duration, the distance, and the name of the workout. In addition, a prole of the speed settings of the workout will appear in the matrix. If you select a calorie workout, the approximate number of calories you will burn will appear in the name of the workout. If the speed or incline setting is too high or too low at any time during the workout, you can manually override the setting by pressing the Speed or Incline buttons; however, when the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. 3. Start the workout. Press the Start button or the Speed increase button to start the workout. A moment after you press the button, the treadmill will automatically adjust to the rst speed and incline settings of the workout. Hold the handrails and begin walking. To stop the workout at any time, press the Stop button. The time will begin to flash in the display. To resume the workout, press the Start button or the Speed increase button. The walking belt will begin to move at 1 mph. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. Each workout is divided into segments. One speed setting and one incline setting are programmed for each segment. Note: The same speed setting and/ or incline setting may be programmed for consecutive segments. 4. Follow your progress with the displays. During the workout, the proles on the speed and incline Current Segment tabs will show your progress. The ashing segment of the prole represents the current segment of the workout. The height of the ashing segment indicates the speed or incline setting for the current segment. See step 5 on page 19. The display will show the time remaining instead of the elapsed time. 5. Measure your heart rate if desired. See step 6 on page 20. 6. Turn on the fan if desired. See step 7 on page 20. At the end of each segment, a series of tones will sound and the next segment of the prole will begin to ash. If a different speed and/or incline setting is programmed for the next segment, the new speed 7. When you are nished exercising, remove the key from the console. 21 See step 8 on page 20. HOW TO USE AN IFIT LIVE WORKOUT button, the My Maps button, the World Tour button, or the Event Training button to download the next workout of that type in your schedule. Press the Compete button to compete in a race that you have previously scheduled. For more information about iFit Live workouts, please see www.iFit.com. Note: If there are no workouts of the selected type in your schedule, the next workout in your schedule will be downloaded. Note: To use an iFit Live workout, you must have an optional iFit Live module. To purchase an iFit Live module at any time, go to www.iFit.com or call the telephone number on the front cover of this manual. You must also have access to a computer with a USB port and an internet connection. In addition, you must have access to a wireless network including an 802.11b router with SSID broadcast enabled (hidden networks are not supported). An iFit.com membership is also required. When you select an iFit Live workout, the display will show the duration of the workout, the distance you will walk or run, the approximate number of calories you will burn, the name of the workout, and the maximum speed and incline settings. If you select a competition workout, the display will count down to the beginning of the race. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 18. 2. Insert the iFit Live module into the console. Note: Each iFit Live button can also run two demo workouts. To use the demo workouts, remove the iFit Live module from the console and press one of the iFit Live buttons. To insert the iFit Live module, see the instructions included with the iFit Live module. IMPORTANT: To satisfy exposure compliance requirements, the antenna and transmitter in the iFit Live module must be at least 8 in. (20 cm) from all persons and must not be near or connected to any other antenna or transmitter. 5. Start the workout. See step 3 on page 21. During some workouts, the voice of a personal trainer will guide you through your workout. You can select a setting for your personal trainer (see THE INFORMATION MODE on page 24). 3. Select a user. If more than one user is registered, you can switch users in the iFit Live main screen. Press the increase and decrease buttons next to the Enter button to select a user. To stop the workout at any time, press the Stop button. The time will begin to ash in the display. To resume the workout, press the Start button or the Speed increase button. The walking belt will begin to move at the speed setting for the rst segment of the workout. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. 4. Select an iFit Live workout. To select an iFit Live workout, press one of the iFit Live buttons. Before some workouts will download, you must add them to your schedule on www.iFit.com. Press the iFit Live button to download the next workout in your schedule. Press the My Trainer 22 6. Follow your progress with the displays. THE COOL-DOWN MODE See step 5 on page 19. The My Trail tab will show a map of the trail you are walking or running or it will show a track and the number of laps you complete. During a competition workout, the Competition tab will show your progress in the race. As you race, the top line in the matrix will show how much of the race you have completed. The other lines will show your top four competitors. The end of the matrix represents the end of the race. 7. Measure your heart rate if desired. See step 6 on page 20. 8. Turn on the fan if desired. See step 7 on page 20. 9. When you are nished exercising, remove the key from the console. See step 8 on page 20. To select the cool-down mode, press the Cool Down button. Then, press the Start button. The walking belt will begin to move at 2.5 mph. After a few minutes, the walking belt will slow to a stop. HOW TO USE THE STEREO SOUND SYSTEM To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your MP3 player, CD player, or other personal audio player; make sure that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store. Next, press the play button on your personal audio player. Adjust the volume level using the volume increase and decrease buttons on the console or the volume control on your personal audio player. If you are using a personal CD player and the CD skips, set the CD player on the oor or another at surface instead of on the console. For more information about the iFit Live mode, go to www.iFit.com. 23 THE INFORMATION MODE 3. CONTRAST LVL: Press the Incline increase and decrease buttons to adjust the contrast level of the display. The console features an information mode that keeps track of treadmill information and allows you to personalize console settings. If a module is connected, you may also select the following screen: To select the information mode, hold down the Stop button while inserting the key into the console and then release the Stop button. When the information mode is selected, the following information will be shown: 4. TRAINER VOICE: To turn on or turn off the voice of the personal trainer, press the Enter button. If an iFit Live module is connected, you may also select the following screens: The time display will show the total number of hours that the treadmill has been used. 5. DEFAULT MENU: The default menu will appear when you insert the key into the console or when you press the Home button. Press the Enter button repeatedly to select the manual main screen or the iFit Live screen as the default menu. The distance display will show the total number of miles (or kilometers) that the walking belt has moved. The lower section of the display will show the status of an iFit Live module. If an iFit Live module is connected, the display will show the words WIFI MODULE. If a USB module is connected, the display will show the words USB/SD MODULE. If no module is connected, the display will show the words NO IFIT MODULE. 6. CHECK WIFI STATUS: Press the Enter button to check the status of your iFit Live module. The lower display will show the software version number, the network SSID, the network encryption type, the connection status, the wireless signal strength, the IP address of the module, the number of registered users and their names, the results of the DNS lookup, and the status of the iFit Live server. While the information mode is selected, the matrix will display several optional screens. Press the decrease button next to the Enter button to select each of the following screens: 7. SEND/RECEIVE DATA: To send and receive workouts, workout logs, and updates, press the Enter button. When the process is nished, the words TRANSFERS DONE will appear in the display. 1. UNITS: To change the unit of measurement, press the Enter button. To view distance in miles, select ENGLISH. To view distance in kilometers, select METRIC. To exit the information mode, remove the key from the console. 2. DEMO: The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, press the power switch into the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, the word ON will appear in the matrix. To turn on or turn off the demo mode, press the Enter button. 24 HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline to zero percent before you fold the treadmill. Then, remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. Before moving the treadmill, fold it as described at the left. CAUTION: Make sure that the latch knob is locked in the storage position. Moving the treadmill may require two people. 1. Hold the frame and one of the handrails, and place one foot against a wheel. 1. Hold the frame rmly in the location shown by the arrow below. CAUTION: Bend your legs and keep your back straight. 1 1 Frame Handrail Frame Wheel 2. Raise the frame until the latch knob locks in the storage position. CAUTION: Make sure that the latch knob locks. 2. Pull back on the handrail until the treadmill will roll on the wheels, and carefully move it to the desired location. CAUTION: Do not move the treadmill without tipping it back, do not pull on the frame, and do not move the treadmill over an uneven surface. 2 Frame 3. Place one foot against a wheel, and carefully lower the treadmill. HOW TO LOWER THE TREADMILL FOR USE Latch Knob 1. See drawing 2. Hold the upper end of the treadmill frame with your right hand. Then, pull the latch knob to the left. IMPORTANT: Do not turn the latch knob. If necessary, push the frame forward slightly. Pivot the frame downward a few inches, and release the latch knob. To protect the oor or carpet, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85° F (30° C). 2. See drawing 1 at the left. Hold the metal frame rmly with both hands, and lower it to the oor. CAUTION: Do not hold the frame by the plastic foot rails, and do not drop the frame. Bend your legs and keep your back straight. 25 TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. c. Remove the key from the console, and then reinsert it. d. If the treadmill still will not run, please see the front cover of this manual. SYMPTOM: The power does not turn on SYMPTOM: The console displays remain lit when you remove the key from the console a. Make sure that the power cord is plugged into a surge suppressor and that the surge suppressor is plugged into a properly grounded outlet (see page 16). Use only a surge suppressor that meets all of the specications described on page 16. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets and may not be compatible with AFCI-equipped outlets. a. The console features a display demo mode, designed to be used if the treadmill is displayed in a store. If the displays remain lit when you remove the key, the demo mode is turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE INFORMATION MODE on page 24 to turn off the demo mode. b. After the power cord has been plugged in, make sure that the key is inserted into the console. SYMPTOM: The displays of the console do not function properly c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes as shown, the switch has tripped. To reset the power switch, wait for ve minutes and then press the switch back in. a. Remove the key from the console and UNPLUG THE POWER CORD. Place the treadmill in the storage position (see HOW TO FOLD THE TREADMILL on page 25). c Tripped Next, remove the two indicated #8 x 3/4" Screws (2). Reset a SYMPTOM: The power turns off during use 2 a. Check the power switch (see the drawing above). If the switch has tripped, wait for ve minutes and then press the switch back in. b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for ve minutes, and then plug it back in. 26 Lower the treadmill (see HOW TO LOWER THE TREADMILL FOR USE on page 25). Remove the three #8 x 3/4" Screws (2). Carefully pivot the Motor Hood (72) off. 72 SYMPTOM: The walking belt slows when walked on a. Use only a surge suppressor that meets all of the specications described on page 16. b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened. 2 Locate the Reed Switch (59) and the Magnet (58) on the left side of the Pulley (61). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in. (3 mm). If necessary, loosen the #8 x 3/4" Tek Screw (16), move the Reed Switch slightly, and then retighten the Screw. Reattach the Motor Hood (not shown) with the ve #8 x 3/4" Screws (not shown) and run the treadmill for a few minutes to check for a correct speed reading. b 2–3 in. Idler Roller Screws Top View 1/8 in. 59 16 c. Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform unless instructed to do so by an authorized service representative. Such substances may deteriorate the walking belt and cause excessive wear. If you suspect the walking belt needs more lubricant, see the front cover of this manual. 58 61 SYMPTOM: The incline of the treadmill does not change correctly d. If the walking belt still slows when walked on, see the front cover of this manual. a. Hold down the Stop button and the Speed increase button, insert the key into the console, and then release the Stop button and the Speed increase button. Press the Stop button and then press the Incline increase or decrease button. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system. If the incline system does not begin calibrating, press the Stop button, and then press the Incline increase or decrease button again. When the incline system is calibrated, remove the key from the console. 27 SYMPTOM: The walking belt is off-center or slips when walked on b. If the walking belt slips when walked on, rst remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened. a. If the walking belt is off-center, rst remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered. b a SYMPTOM: The console display has lines running through it a. If lines appear in the console display, see THE INFORMATION MODE on page 24 and adjust the contrast level of the display. 28 EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone. For maximum fat burning, exercise with your heart rate near the middle number in your training zone. WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems. The heart rate monitor is not a medical device. Various factors may affect the accuracy of heart rate readings. The heart rate monitor is intended only as an exercise aid in determining heart rate trends in general. Aerobic Exercise—If your goal is to strengthen your cardiovascular system, you must perform aerobic exercise, which is activity that requires large amounts of oxygen for prolonged periods of time. For aerobic exercise, adjust the intensity of your exercise until your heart rate is near the highest number in your training zone. These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results. WORKOUT GUIDELINES EXERCISE INTENSITY Warming Up—Start with 5 to 10 minutes of stretching and light exercise. A warm-up increases your body temperature, heart rate, and circulation in preparation for exercise. Whether your goal is to burn fat or to strengthen your cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your heart rate as a guide to find the proper intensity level. The chart below shows recommended heart rates for fat burning and aerobic exercise. Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During the first few weeks of your exercise program, do not keep your heart rate in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exercise—never hold your breath. Cooling Down—Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles and helps to prevent post-exercise problems. EXERCISE FREQUENCY To find the proper intensity level, find your age at the bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your age define your “training zone.” The lowest number is the heart rate for fat burning, the middle number is the heart rate for maximum fat burning, and the highest number is the heart rate for aerobic exercise. To maintain or improve your condition, complete three workouts each week, with at least one day of rest between workouts. After a few months of regular exercise, you may complete up to five workouts each week, if desired. Remember, the key to success is to make exercise a regular and enjoyable part of your everyday life. 29 PART LIST Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 9 47 4 4 1 4 1 4 4 7 4 4 2 12 6 29 2 2 10 8 1 1 2 4 2 2 2 2 16 8 1 1 2 2 2 6 12 3 2 8 2 1 1 1 1 8 1 1 1 1 Model No. PFTL13011.0 R0513A Description Key No. Qty. #8 x 1/2" Screw #8 x 3/4" Screw #10 x 3/4" Screw 5/16" x 5/8" Screw 3/8" x 2" Bolt 3/8" x 1" Screw 3/8" x 1 3/4" Bolt 3/8" x 2 3/4" Screw 3/8" x 1 1/4" Screw #8 x 1/2" Ground Screw #10 Star Washer 5/16" Star Washer 3/8" Nut 3/8" Star Washer 3/8" x 1" Flat Head Bolt/Screw #8 x 3/4" Tek Screw 1/4" x 2 1/2" Screw 3/8" x 2" Bolt #8 x 3/4" Pan Head Tek Screw #8 x 1" Screw 3/8" x 1 1/2" Bolt 3/8" x 2" Bolt #8 x 1 3/4" Screw #8 x 7/16" Screw 5/16" Motor Screw 1/2" x 1 1/2" Bolt 5/16" x 1 3/4" Bolt 5/16" x 1 1/4" Bolt 5/16" x 3 1/4" Screw 5/16" x 2 3/8" Screw 1/4" x 1 3/4" Screw 1/4" Star Washer 5/16" Flat Washer 3/8" Flat Washer 1/2" Nut 3/8" Jam Nut 5/16" Nut Hood Clip Platform Grommet 5/16" Washer 1/2" Rear Leveling Foot Nut Hex Key Short Hex Key Left Frame Cap Left Foot Rail Platform Bracket Left Foot Rail Base Left Frame Cover Idler Roller Right Frame Cap 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 30 1 2 1 2 2 2 1 1 1 4 1 1 1 1 1 1 1 1 2 2 1 1 1 2 1 1 2 1 1 1 1 2 1 1 1 1 1 1 2 1 2 1 1 2 1 1 1 1 1 1 Description Walking Belt Platform Cushion Bracket Walking Platform Platform Cushion Belt Guide Front Cushion Reed Switch Clamp Magnet Reed Switch Wire Tie Drive Roller/Pulley Right Foot Rail Right Foot Rail Base Frame Storage Latch Drive Motor Motor Belt Right Frame Cover Rear Leveling Foot Rear Leveling Foot Cover Rear Frame Cover Motor Hood Hood Cover Incline Frame Spacer Incline Motor Incline Frame Frame Spacer Controller Electronics Plate Power Cord Power Cord Grommet Hood Post Power Switch Belly Pan Pulse Bar Top Pulse Bar Tray Upright Wire Handrail Bracket Left Upright Tray Bracket Left Handrail Right Handrail Caution Decal Latch Warning Decal Left Base Cover Right Base Cover Key/Clip Right Upright Base Ground Wire Key No. Qty. 101 102 103 104 105 106 107 108 109 110 111 2 2 1 2 1 1 1 1 0 1 1 Description Key No. Qty. Grommet Front Base Pad Left Wheel Cap Wheel Base Heart Rate Strap Heart Rate Sensor Console Base Not Used Left Tray Right Tray 112 113 114 115 116 117 118 119 120 * 1 1 4 1 6 1 1 1 2 – Description Console Console Frame Console Clamp Console Ground Wire Cable Tie Right Handrail Cover Left Handrail Cover Right Wheel Cap Base Pad User’s Manual Note: Specications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated. 31 32 42 17 48 16 16 19 43 19 27 39 33 37 29 19 49 16 41 71 29 45 44 50 51 69 19 70 54 29 46 17 46 52 30 37 40 46 53 16 37 40 19 27 39 33 37 16 40 37 46 40 29 16 37 16 69 41 70 29 46 30 37 40 24 47 16 54 52 30 19 16 55 2 16 40 37 57 7 29 46 16 16 28 37 30 68 13 63 56 26 16 40 37 30 46 64 30 58 16 29 40 37 61 62 16 23 59 67 65 2 29 46 55 10 24 30 60 28 25 66 13 16 56 37 31 32 5 26 10 30 23 EXPLODED DRAWING A Model No. PFTL13011.0 R0513A EXPLODED DRAWING B Model No. PFTL13011.0 R0513A 2 38 2 38 2 38 72 22 74 73 77 76 10 36 75 15 21 15 35 36 74 78 2 35 77 82 2 2 2 79 2 80 82 2 16 10 81 83 84 16 33 EXPLODED DRAWING C Model No. PFTL13011.0 R0513A 3 11 85 87 88 15 2 14 89 14 6 15 14 86 3 11 2 90 92 2 91 2 2 14 6 12 4 93 12 118 2 94 4 117 98 95 2 15 91 96 14 89 14 6 2 2 8 14 6 9 14 8 100 94 88 101 97 36 10 99 102 2 16 36 103 8 120 16 36 105 8 18 104 34 14 102 18 119 16 120 34 104 36 2 34 16 9 EXPLODED DRAWING D 106 Model No. PFTL13011.0 R0513A 2 108 107 2 2 2 2 1 110 2 1 1 111 1 1 2 2 1 1 112 113 114 20 114 20 10 115 114 20 2 2 116 114 20 35 116 ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) • the name of the product (see the front cover of this manual) • the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING near the end of this manual) LIMITED WARRANTY IMPORTANT: You must register this product within 30 days of the purchase date to avoid added fees for service needed under warranty. Go to www.proformservice.com/registration. ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The frame and drive motor are warranted for a lifetime. Parts are warranted for ve (5) years from the date of purchase. Labor is warranted for two (2) years from the date of purchase. This warranty extends only to the original purchaser (customer). ICON’s obligation under this warranty is limited to repairing or replacing, at ICON’s option, the product through one of its authorized service centers. All repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped to a service center, freight charges to and from the service center will be the customer’s responsibility. If replacement parts are shipped while the product is under warranty, the customer will be responsible for a minimal handling charge. For in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend to freight damage to the product. This warranty will automatically be voided if the product is used as a store display model, if the product is purchased or transported outside the USA, if all instructions in this manual are not followed, if the product is abused or improperly or abnormally used, or if the product is used for commercial or rental purposes. No other warranty beyond that specically set forth above is authorized by ICON. ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in connection with the use or performance of the product; damages with respect to any economic loss, loss of property, loss of revenues or prots, loss of enjoyment or use, or costs of removal or installation; or other consequential damages of any kind. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to the customer. The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of merchantability or tness for a particular purpose are limited in their scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to the customer. This warranty provides specic legal rights; the customer may have other rights that vary from state to state. ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813 Part No. 321190 R0513A Printed in USA © 2013 ICON IP, Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 36 Producer : Mac OS X 10.6.8 Quartz PDFContext Create Date : 2013:05:31 20:44:19Z Modify Date : 2013:05:31 20:44:19ZEXIF Metadata provided by EXIF.tools