Profoto Pro B2 Users Manual 7_Manual030614
Pro-B2 to the manual fa66fdef-281c-465c-9b68-d9e9c56b2171
2015-02-06
: Profoto Profoto-Pro-B2-Users-Manual-520848 profoto-pro-b2-users-manual-520848 profoto pdf
Open the PDF directly: View PDF 
.
Page Count: 17
| Download | |
| Open PDF In Browser | View PDF |
User Manual Profoto–Stockholm, Sweden Profoto– Welcome! Pro -B2 Safety Instructions Profoto generators and flash heads are part of a complete professional lighting system. Please read the instruction manual carefully before use. Flash tubes and modelling lights emit considerable heat and can be dangerous if not used properly. Always unplug the lamp cable from the generator before changing modelling light, glass cover or flash tube. Under no circumstances are generators or heads to be opened! There is high voltage inside . .. .. .. .. the generator! Service is only to be carried out by authorised personnel. Never connect accessories of other brands without consulting an authorised service station. Do not touch hot glass or metal parts. Do not obstruct ventilation. Do not connect the lamp head with the transport cap in place. Never place filters or diffusing material directly onto glass covers, flash tubes or modelling lights. Never position the light extremely close to people. When mounting umbrellas, do not touch flash tubes or modelling lights with the metal shaft – risk of high voltage. Always use a grounded power supply/mains outlet. Protect the flash equipment against moisture, condensation, heat, sand and dirt. Profoto 3 The Light Shaping Company Profoto– Welcome! Pro -B2 Contentsxxxxxxxxxxxx Introduction .......................................................... 7 Accessories ........................................................ 8-9 ProHead .............................................................. 10 Pro-B head............................................................ 11 ProTwin.......................................................... 12 - 13 ProRing ................................................................ 14 Pro-B2 1200 .................................................. 15 - 29 The Pro-B2 system consists of the following products: Generators: Pro-B2 Heads: ProHead Pro-B head ProTwin ProRing The photographer’s tools are a natural part of the creative process. All Profoto reflectors and Like the painter’s brush, the sculptor’s chisel, or the musician’s accessories fit the instrument, their form and design should reflect their function. Pro-B2 system They should have the right feel, and be aesthetically pleasing. – Profoto founders Conny Dufgran and Eckhard Heine The Light Shaping Company 5 Profoto Profoto – Welcome! Pro -B2 Thanks for showing us your confidence by investing in a Profoto Pro-B2 system. Formore than three decades we have sought the perfect light. What pushes us is the conviction that we can even offer the most demanding photographer yet better tools. Still weknow that we will never be able to offer the best light there is; the natural sunlight. But Pro-B2 comes very close. It is the best series we have ever manufactured. Before our products are shipped we have them pass an extensive and strict testing program.We check that they pass the quality and capacity levels the most demanding photographers require. For this reason our flash equipment is the standard in most rental studios in New York and Tokyo and the most rented flash all over the world. Quality of Light The system consists of different generators built and designed to meet the demands of the most demanding photographers on this planet. Yet the most important thing is the light you create and it is then essential that the system offers freedom to create your own light. The Pro-7 heads offer you this possibility in particular. The light source, both the flash tube and the modelling light, is placed high and free in the flash head. This makes it easier for you to adjust the light and use your creativity. The reflectors are moveable and lock easily into place. You can move the source of light toward the focus of the reflector to reflect the light backwards before it is projected forward. This is not new, of course. Our flash heads have always been designed that way. What is new, however,is our new glass cover, which is designed to increase precision. The ProHead and the ProTwin are supplied with a frosted and UV-coated cover glass, which together with the flash tube, produces a colour temperature adapted to daylight colour film. There are glass covers with varying filtration, for greater changes. The whole Pro-7 system is modular. Every single reflector and accessory creates its special light and the unique Profoto focusing system offers you a possibility to create your own light with only a few different reflectors. Thanks! The Light Shaping Company 7 Profoto ComPact 300 ComPact Plus 600 ComPact Plus 1200 Acute2R 1200/2400 Acute2 1200/2400 D4 –1200/2400/4800 (with radio slave module) (with or without radio) Pro-B2 1200 Pro-B2 1200 (with radio slave module) Pro-7b Pro-7s 1200 Pro-7s 2400 Pro-7a 1200 Pro-7a 2400 HEADS MONOLIGHTS AND GENERATORS Profoto –The Light Shaping System Glass covers ProTungsten Narrow Beam Travel Reflector 10 07 13 Acute/D4Head 90 06 66 StickLight 10 07 38 Narrow Beam Reflector 10 06 17 TeleZoom Reflector 10 07 12 Magnum Reflector 10 06 24 Wide Zoom Reflector 10 07 11 Acute/D4 Twin 90 06 78 Standard Zoom Reflector 10 06 10 Grid Reflector 10 07 05 Acute/D4 Ring 33 05 13 Disc Reflector 10 06 54 Pro-B Head 90 07 25 ProGlobe 10 06 73 Softlight Reflector silver 10 06 07 ProHead 90 07 09 Softlight Reflector white 10 06 08 7” Grids 5˚ - 10 06 35 10˚ - 10 06 34 LIGHT SHAPING TOOLS ProTwin 90 07 19 ProRing 30 05 15 FresnelSpot 10 07 41 PR Softlight Reflector 10 06 42 PR Close-Up Reflector 10 06 43 PR WideSoft Reflector 10 07 17 MultiSpot – 10 07 33 Barn Doors – 10 07 44 Clear Fresnel lens – 10 07 50 Iris Diaphragm – 10 07 48 85 mm Lens – 10 07 46 Glass Disc 10 07 04 10° Grid 10 06 18 Pro Tube 10 06 70 Barn Doors 10 07 15 10˚ WideZoom grid 10 06 36 Filter Holder 10 07 01 Grid - and filter holder 90 06 49 Barn Doors for FresnelSpot 10 07 58 Barn Doors 10 06 71 Hardbox 10 07 18 ZoomSpot 10 07 34 Snoot 10 06 51 5°, 10°, 20° Grids 10 06 46, 10 06 05, 10 06 06 Grid for softlight Reflectors 10 06 09 Softgrids, masks and diffusers available. Silver Umbrella 10 06 16 – M 10 07 20 – L Translucent Umbrella 10 06 13 – S 10 06 14 – M Still Light XL 60x80 10 07 39 Still Light XXL 80x120 10 07 40 5´Giant Reflector 10 03 11, 7´Giant Reflector 10 03 12, 8´ Giant Reflector 10 03 13 Diffusors available (-1/3 and 1 f-stop) StripLights S 0,7m –10 07 35, M 1,3m–10 07 36, L 1,9m–10 07 37 Softbox 1x3´RF (30x90cm) 25 45 36 Softbox 1x4´RF (30x120cm) 25 45 24 Softbox 1x6´RF (30x180cm) 25 45 34 Softbox 2x2´RF (60x60cm) 25 45 25 Softbox 2x3´RF (60x90cm) 25 45 26 Softbox 3x4´RF (90x120cm) 25 45 27 Softbox 4x6´RF (120x180cm) 25 45 35 Softbox 3´Octa (90cm) 25 45 28 Softbox 5´Octa (150cm) 25 45 29 ProBox 20x30cm 90 05 61 White Umbrella 10 06 11 – S 10 06 15 – M 10 07 19 – L Pro -B2 Profoto – Heads Profoto – Heads Pro -B2 ProHead The modelling light is turned on and off with the black switch modelling lamp but can be equipped with a 500W lamp [1] at the back of the head. The built-in fan is a thermostati- if using the longer (100mm) glass cover used on the cally controlled 2-speed fan ensuring minimized sound level ProTwin. Max 250W lamp when used on the Pro-B2. and efficient cooling in all situations. Please note that when Pro-B head changing modelling light, flash tube or glass cover the lamp cable must be disconnected from the generator. 1 2 3 4 The modelling light has a mini-can socket (E11). The flash The Pro-B head is a small and easily transportable flash tube has two metal pins. When removing a flash tube, pull it head exclusively designed for the Pro-B2 and Pro-7b straight out of the sockets. When inserting a new flash tube, generators. Please note that when changing modelling check that the trigger-wire clasps properly around the flash light, flash tube or glass cover the lamp cable must be tube (please see mounting instructions in package). When disconnected from the generator. The modelling light mounting the glass cover, check that both locking springs is a standard 100W lamp with an E11 socket. The flash connect properly into glass cover holes. In case the head tube has two pins. When removing a flash tube, pull it overheats the modelling light automatically switches off. straight out of the sockets. When inserting a new When the temperature has dropped sufficiently the model- flash tube, check that the trigger-wire clasps properly ling light will switch on again. At the back of the head there around the flash tube (please see mounting instructions is a thread for attaching accessories like handle (std. with in package). The head has no fan. Because of the heat head) or a flex arm (Magic arm) to hold filters etc. generated there is a certain limitation to the number of There are glass covers for different colour temperatures flashes per minute. At the back of the head there is a available. Loosening the handle [4] can easily alter the flash thread for attaching accessories like handle (std. with head position. An umbrella can be mounted in the umbrella head) or a flex arm (Magic arm) to hold filters etc. 1 2 3 4 holder. The ProHead is normally delivered with a 250W Profoto 10.15.33 Glass Cover, frosted, UV-coated (standard) ProHead cont. 10.15.34 Glass Cover, frosted, uncoated, + 300°Kelvin 10.15.28 10.15.35 Glass Cover, frosted, extra UV-coated, - 300°Kelvin 10.20.02 Modelling Light 250 W, 120 V, Mini-can socket (E11) 10.15.36 Glass Cover, clear, uncoated, + 300°Kelvin 10.07.09 Handle for Pro-7 head, Pro-7b head and Pro-7 twin 10.15.37 Glass Cover, clear, UV-coated 10.20.14 Modelling light 100 W, 120 V, E11 socket 10 The Light Shaping Company Flash Tube, uncoated The Light Shaping Company 11 Profoto Pro -B2 Profoto – Heads Profoto – Heads Pro -B2 ProTwin Profoto The ProTwin is used to obtain extremely short flash dura- mized sound level and efficient cooling in all situations. tion, very quick recycling or to get up to 4800 Ws out of Please note that when changing modelling light, flash tube one single head. There are two flash tubes in a ProTwin. or glass cover the lamp cable must be disconnected from As the flash duration is shorter at low power settings, the generator. and as only half of the desired power is used in each tube, The modelling light has a mini-can socket (E11). The flash consequently shorter flash duration is obtained. For tube has two metal pins. When removing a flash tube, pull example if you need 1200Ws, you fire 600 Ws from each it straight out of the sockets. When inserting a new flash tube, and your flash duration is shorter than if a standard tube, check that the trigger-wire clasps properly around the ProHead is used. The flash duration at 1200 Ws with a flash tube (please see mounting instructions in package). ProHead is 1/2200 while it is only 1/3200 with a ProTwin. When mounting the glass cover, check that both locking One or two generators can be used. springs connect properly into glass cover holes. In case the If, on the contrary, you require 2400Ws from one head head overheats the modelling light automatically switches you connect ProTwin to two Pro-B2/1200 generators. off. When the temperature has dropped sufficiently the For the same reason shorter recycling times is obtained modelling light will switch on again. At the back of the head when two generators are used, as the recycling is faster there is a thread for attaching accessories like handle (std. when the generators in fact only need to recharge half with head) or a flex arm (Magic arm) to hold filters etc. the energy. Flash duration and recycling for a ProTwin There are glass covers for different colour temperatures at a certain power setting - for example 1200 Ws - available. compares with a ProHead set at 600 Ws. When used on the Pro-B2 it is strongly recommended Fits ProHead, Pro-7b head and The modelling light is turned on and off with the black to change from a 500W to a 250W lamp for increased ProTwin. Makes it easier to switch [1] at the back of the head. The built-in fan is a efficiency due to the fact that the B2 delivers max 250W thermostatically controlled 2-speed fan ensuring mini to the lamp. 10.15.18 Glass Cover, frosted, UV-coated (standard) ProTwin cont. 10.15.19 Glass Cover, frosted, extra UV-coated, -300°Kelvin 10.15.32 10.15.20 Glass Cover, frosted, uncoated + 300°Kelvin 10.20.07 Modelling Light 500W, 120 V, mini-can socket (E11) 10.15.21 Glass Cover, clear, UV-coated 10.07.09 Handle for ProHead, Pro-7b head and ProTwin 10.15.23 Glass Cover, clear, uncoated + 300°Kelvin 10 12 The Light Shaping Company Magic arm Fits ProHead, Pro-7b head and ProTwin. Filters and Barn Doors can be attached. Handle manoeuvre lamp heads when using soft boxes. (Included with all ProHeads) Flash Tube, uncoated The Light Shaping Company 13 Profoto Pro -B2 Profoto – Heads Profoto – Generators Pro-7 ring The ring flash fits all Pro-7 generators, and is an entirely mobile source of light. The interior diameter of 100 mm provides plenty of space for professional camera lenses. Since the camera holder can be tilted forward and backwards, as well as upwards and downwards, most cameras can be attached. This makes an excellent source of light in cramped areas, such as the interior of an automobile. Many fashion photographers also use the ring flash to find new angles and capture details. The ring flash provides a very distinct, directed light, but can be complemented by a soft or a widesoft Reflector, which increases the light source, thereby producing a softer light with fewer sharp shadows. For close-ups, there is a reflector that focuses the light 50 cm in front of the camera lens. The maximum charge is 9600Ws per minute. This means 4 flashes a minute at 2400 Ws, 8 flashes at 1200 Ws, 16 flashes at 600 Ws, etc. Changing flash tube is only to be done at a professional servicestation. . . . . . Profoto Mounting the reflector Remove the two ridged screws fixating the camera holder. Remove the four ridged nuts holding the outer and inner reflectors together. Run the lamp cable through the outer reflector and let the reflector slide into position. Reassemble the outer and inner reflectors using the ridged nuts. Reassemble the camera holder using the two ridged screws. 14 The Light Shaping Company Profoto Pro-B2 Generators Pro -B2 Profoto – Generators Pro -B2 Pro-B2 Generators Nomenclature .................................................................................................. 19 Brief Instructions ............................................................................................ 20 Battery and Battery Charging ............................................................................ 21 Changing Battery.............................................................................................. 22 Connecting Lamp Heads .................................................................................... 22 Energy Control ................................................................................................ 22 Choice of Modelling Light.................................................................................... 23 Connecting Camera & Flash Meter ...................................................................... 24 Recharging ...................................................................................................... 24 Photocell ........................................................................................................ 25 Signals, Visible & Audible .................................................................................. 25 Safety Functions .............................................................................................. 26 Reliability Testing - The R-Test ............................................................................ 26 Colour Temperature .......................................................................................... 26 Flash Duration .................................................................................................. 27 Lamp Heads .................................................................................................... 27 Radio receiver (optional) .................................................................................... 27 Technical Data.................................................................................................. 28 Digital wirelöess Freedom (radio slave) ................................................................ 29 Warranty ........................................................................................................ 30 The Light Shaping Company 17 Profoto Profoto – Generators l k j i h g f Pro -B2 e Nomenclature Pro-B2 Generator 1. Lamp Head Sockets 2. SYM/ASYM Switch 3. Indicator for Battery Charge 4. Charge Outlets 5. Photo/IR-cell m d c 6. Sync Sockets 7. Photocell Button On/Off 8. Ready Lamp & Test Button 9. Audible Signal On/Off 10. Recharging Button Slow/Fast 11. Modelling Light Control n 12. On/Off Switch 13. Modelling light control 14. Radio channel control (optional) a 15. Energy control, fine adjustment 16. Energy Control o b p a The Light Shaping Company 19 Profoto Pro -B2 Profoto – Brief Instructions Profoto – Assesoires Battery and battery charging Brief Instructions .. . . .. .. .. . . Pro -B2 The battery can be charged through the mains outlet by using a special charger or charged See page 18 for top panel picture. directly from the car cigarette lighter when driving. The charging time is only 2.5 or 5 hours depending on the charger used. The generator can be used during charging. The generator Connect the desired number of lamp heads to sockets A & B. cannot be used without a battery in place. The battery will not deteriorate from being Start charging by pushing the button ON [12]. The ready lamp [8] will light up when the generator is fully charged. charged frequently or from being charged when not fully discharged. Neither does it need The generator can be activated from OFF position by means of a sync signal from a camera. recharged. The battery indicator shows the charge level and is up-dated when the generator to be fully charged before using it. The actual battery life is in fact elongated when fully is turned on or when firing a flash. The battery can be charged when dismantled. The environment influences the capacity of both the generator and the battery, for example Choose the desired energy distribution with the control POWER [15,16 ] and the SYM/ASYM switch [2]. The generator will automatically dump if the energy level is lowered. extreme cold decreases the battery charging capacity. Profoto Pro-B2 – Assesoires Connect sync cord and/or flash meter to the sync sockets SYNC [6] Activate the photocell [5] by pushing the button SLAVE [7]. Activate the audible signal by pushing the button SOUND [9]. Pushing the button MOD.LIGHT [11] turns on the modelling light, which will stay on for 10 seconds. To have the modelling light stay on for a longer period of time push the button two or three consecutive times, which will give 30 and 60 seconds respectively. 10.02.18 Multivoltage Charger incl. adapters, 90-130V/190-250V, 50-60Hz, 2.0A, 5 hour charging (incl. with the Pro-B2) 10.02.19 Charger (12/24V) for Car Cigarette Lighter, 3.5A, 2.5 hour charging 10.02.21 Battery only 90.07.26 Battery incl. Cassette 90.07.65 Universal power adapter for 2.5 hour charging, The adapter accepts a wide range of input voltages: 12-24V or 90-240V. 34.02.02 Pro-B protective bag Choose fast recharging by pushing down the button FAST [10]. The charge indicator [3] shows the battery charge level. Turn off the generator by pushing and holding down the button ON [12]. The generator automatically turns off after 30 minutes when not in use. If using the optional built-in 32 channel radio receiver use the Radio channel control (14) to set the channel. The Light Shaping Company 20 Profoto The Light Shaping Company 21 Profoto Pro -B2 Instructions Instructions [1] [15] [16] Changing Batteryxxxxxxxxxxxxxxxxxxxx [8] [11] [13] obtained is chosen with the control POWER [15,16]. If the lamp head is connected to B half By putting the two handles at the bottom together the battery the energy is obtained if the SYM/ASYM switch is in position A 1/1 (1/2), B 1/2. If the switch cassette is released and the battery can easily be pulled out. A new is in the position A 1/2, B 1/4 a quarter of the chosen energy is obtained. Two lamp heads: battery is pushed all the way into the generator and is locked by The energy chosen with the POWER [15,16] control can either be distributed evenly through directing the handles away from each other. When changing the the two lamp heads (the SYM/ASYM switch in the position A1/1 (1/2), B 1/2) or twice battery it must be mounted in a battery cassette by an authorised as much energy (equivalent to one f-stop ratio) through A as B (the SYM/ASYM switch service station. in the position A 1/2, B 1/4). At any change of energy with the control POWER [15,16 ] Connecting Lamp Heads the ready lamp [8] is put out. When the light is out, this is an indication that auto dumping One or two lamp heads can be connected to the lamp head sockets or recharging is in progress. A & B [1]. When connecting the lamp head plug, align the dots Choice of Modelling Light on the plug with the white dot on the generator panel. Secure by First set the MOD.LIGHT (13) to timer controlled or continuous The maximum modelling turning the locking ring on the plug clockwise. light is 250 W even if a ProHead/ProTwin with a 500 W halogen lamp is used. A ProHead or older heads - Pro-7, PB or PF - can be used. The modelling light is automatically dimmed Energy Control The energy output is regulated over eight f-stops. The energy can down to max 2500 W regardless of the nominal effect of the modelling light. The efficiency partly be adjusted with the control POWER [16] in 1/2 f-stop (output) is higher when using a 100 or 250 W lamp. We therefore recommend using max increments, from 1/1 down to 1/16 of the total energy 250 W lamps also in the ProHead. The modelling light is constant and does not vary with the (equivalent to five f-stops) and also via the POWER dial (15) for energy chosen. If you wish to use a 250W lamp the ProHead or proTwin flash head must be fine-grained energy control in 1/10 f-stop increments and partly used since the built-in fan will work on Pro-B2. Do not use older heads with a 250W lamp. with the SYM/ASYM switch [2] and through the use of one or Profoto Pro -B2 Timer controlled two lamp heads. Pushing the button MOD.LIGHT [11] turns on the modelling light. To save the battery the One lamp head: The total energy chosen is obtained if the modelling light is automatically turned off after 10 seconds or when triggering a flash. lamp head is connected to A and the SYM/ASYM switch To have the modelling light stay on for a longer period of time push the button two or three is at A 1/1(1/2), B 1/2. The lamp head can be connected consecutive times, which will give 30 and 60 seconds respectively. For every period of to socket A or B. If the lamp head is connected to A the 20 seconds when the modelling light is turned on the battery capacity decreases by the total energy equivalent of two flashes at full energy. 22 The Light Shaping Company The Light Shaping Company 23 Profoto Pro -B2 Instructions Instructions [6] [12] [10] Continuous [3] Pro -B2 [5] [7] The generator automatically turns off when the controls POWER [15,16], MOD.LIGHT [11] Set the MOD.LIGHT [13] control to continuous. The modelling lamp will automatically dim and the sync outlets have not been in use for 30 minutes. down while recharging or when the energy output is changed. In this position the battery is Photocell drained in 20 – 60 minutes depending on the lamp used (100 or 250 W) and the number of The built-in photocell [5] will sense flash release as well as IR-signals from most IR-trans- flashes triggered. mitters. The photocell is disabled when the button marked SLAVE [7] is released. The photo- Connecting Camera & Flash Meter The two sync sockets [6] allow the camera and flash meter to be connected simultaneously. cell can also, via cable, trigger off an additional generator. The 5 m sync cord can be extended without limitations with sync extension cords. Further Signals, Audible & Visible sync connections can be made with the Profoto sync interconnection cable or by so called ”hard wiring”. A slave signal from the photocell can be forwarded through this cable to turned on. The charge indicator [3] is up-dated when the generator is turned on or when another flash generator. a flash is fired. When all lights light up the generator has no charging value - fire a flash. Recharging The recharging starts when the ON/OFF switch [12] is pushed down. Slow or fast recharging When the energy output is changed the white ready lamp [8] and the modelling lamp turns can be chosen. When the button FAST [10] is released, the generator will recharge slowly. off thus indicating that dumping or charging of the energy is in progress. A short ”beep” Push the FAST button [10] for normal fast recharging cycles; The recharging time is approx. can be heard when the generator is fully recharged. Releasing the button SOUND [9] can 1.8 sec at full energy. When extremely short recharging times are required, for instance turn off this signal. The generator can be restarted directly from a camera, if a sync cord when operating a motor-drive camera, choose lower energy settings. The lowest energy is connected, by shooting a frame. If a flash is fired before the generator is fully charged setting offers the fastest recharging rate (0.04 sec or 25 flashes/sec.). The generator is a long ”beep” can be heard thus indicating an underexposed frame. A number of short turned off by pressing down the button ON [12] for a minimum of three seconds. consecutive ”beeps” can be heard before the generator automatically turns itself off. [13] Profoto One of the indicator lights for the battery charge [3] will light up once the generator is [8] [16] 24 The Light Shaping Company The Light Shaping Company [9] 25 Profoto Pro -B2 Instructions Instructions [3] [2] Safety Functions [14] Flash Duration If the generator for any reason whatsoever overheats, the recharging will completely stop. In order to reduce the flash duration use first the SYM/ASYM switch (2) and the position of After a while, when the temperature has gone down sufficiently, the generator will start the head before using the POWER dials (15,16) recharging at a normal pace again. No recharging can take place when the red light of the (For more details please see ”Energy control” on page 22 and ”Technical Data” on page 28). battery indicator [3] is on. Lamp Heads This is a safety feature protecting the battery from harmfully low discharging. There are The ProHead, ProTwin, Pro-7 head, the Pro-7 twin, the Pro-7 ring or the exclusively designed- three fuses on the battery cassette. One is for the charging circuits and two for the battery. Pro-B orPro-7b head can be used. With the ProTwin and two Pro-7b generators 2400 Ws Furthermore the contacts are short-circuit proof. can be obtained. When using the new ProHead or ProTwin heads the fan will work when PLEASE NOTE: Never store your flash equipment in a car on a hot and sunny day. Avoid connected to the Pro-B2. Radio receiver (optional) storing the generator close or below the freezing point, which can lead to loss of capacity (flash output) and risk of condensation when used in a warmer surrounding immediately. The optional built-in radio receiver is available in 433Mhz (CE version) or 344Mhz (US). Do not expose any flash equipment to wet or humid environments or extreme electro- They are compatible with all PocketWizard Plus transmitters and PocketWizard MultiMAX magnetic fields. transceivers working on the same frequency! Please make sure to use the frequency allowed Reliability Testing - The R-Test in your country. The Profoto R-test guarantees that all products leaving the factory meet the very high standards required of professional equipment by professional photographers. The R-test is a rigorous performance test that Profoto generators are put through - 360 full power flashes are released during one hour, which is equivalent to 10 rolls of 35 mm film. After the test the equipment is examined to see that all parts have kept a normal operating temperature and are not malfunctioning in any way. All Profoto products are subjected to the R-test prior to being shipped. Profoto Pro -B2 Colour Temperature The radio receiver has 32 different channels and the last 16 have also 4 sub channels (zones), which can be used for triggering only the background light, ceiling light etc. There is a special dial (14) for setting the first 4 radio channels and a special learn mode to set the other 28 channels. To set the channels 5 – 32 set the Radio control (14) to learn, turn off the generator and turn it back on again and within 30 seconds trigger a flash by pushing and holding down the trigger button on the PocketWizard until the flash triggers (3-5 seconds). The receiver is now set to The Pro-7 generators are perfectly suited for critical analogue (film) and digital shoots. the same channel as selected on the Pocket Wizard Transmitter. If you want to change the The colour temperature is constant with a variation of a maximum of +/- 150°Kelvin. channel, first select the desired channel on the transmitter and repeat the above procedure. PLEASE NOTE: combining flash tubes and/or glass covers with different coatings can make The generator will remember the selected channel in learn mode but next time you turn on even more distinctive colour temperature adjustments. the Pro-B2 it takes approx. 30 seconds before you can trigger a flash. 26 The Light Shaping Company The Light Shaping Company 27 Profoto Pro -B2 Profoto – Technical data Profoto – Digital Freedom Technical Data Pro-B2 Pro -B2 Digital Wireless Freedom (Radio Slave) Energy: 1200 Ws f-stop at 2m with Magnum 50° reflector 90.3 Profoto Pro-B2 generators are available as Pro-B2R version with an integrated PocketWizard Energy control: Over an eight f-stop range (down to 9Ws). In 1/10 or 1/2 step adjustments. 32 channel/4 sub channel radio receiver for wireless synchronization from a distance up to 100m via digital encoded radio signals. This receiver is compatible with dedicated Energy distribution: Symmetric or Asymmetric (2:1 ratio) Sekonic® flashmeters and PocketWizard® transmitters and transceivers. Recycling: 0.04 – 1.8 Sec. The PocketWizard Plus transmitter (4 channels) for wireless synchronization is available Number of outlets: 2 through Profoto. Flas duration: 1/2200 - 1/7400 sec. PLEASE NOTE: With ProTwin and two Pro-B2 generators on the same equivalent power gives half the recycling time and shorter flash duration. Flash capacity: Up to 200 full power flashes per charge Modelling Light: Up to 250W continous or time controlled (max 60 sec.) Battery: Nonspillable lead/acid battery in a battery cassette for rapid exchange Charging time: 5 hours with standard multi-voltage charger and 2.5 hours with universal power adapter Size: 24x17x23cm (9.5 x6,75 x10 inches) Weight: 12kg, incl. battery (26 pounds) Others: Indicator for battery status, for full, 3/4, 1/2, and 1/4 power; built-in photocell, 2 sync outlets . . . . Digital Wireless Freedom offers: Studio or on-location shoots without unreliable and disturbing PC cords. A light meter that wirelessly triggers all or only selected electronic flash units and measures the light simultaneously, can even trigger a camera. (Sekonic L-358, L-608 or L-558) A handy solution for triggering cameras, flash units or both simultaneously from behind a camera or from a remote location. All this wireless technology built into your photo equipment, ready for you to control remotely. Visit www.pocketwizard.com for further information. Optional built in Radio with 32 channel / 4Zone for remote operation. PLEASE NOTE! The DWF system is available in two different versions: I. 344MHz (USA) II. 433MHz (Europe) If you are in any doubt about the frequency allowed in your country, please get in contact with the local Profoto distributor BEFORE you activate the radio slave transmitter. It is strictly forbidden by law to use these frequencies in other countries and it is impossible to use both versions in combination. Profoto 28 The Light Shaping Company The Light Shaping Company 29 Profoto Pro -B2 Warranty All Profoto generators and heads are individually tested before they leave the company and guaranteed for a period of two years with the exception of flash tubes, glass covers, modelling lamps and cables. Profoto is not responsible for technical malfunctions created by improper use or accessories made by other companies. If you have any technical problems please get in contact with an authorized Profoto Pro-B2 service station. January 2005 Product codes, descriptions and included components may vary from market to market around the world. Please consult your local dealer or distributor for specific information. Photos: Gert Jansson/Jan Fridlund. Production: fjellis.com Order number: 34 40 21 Profoto 30 The Light Shaping Company We wil make a pic of the B2.... Profoto AB Box 2023 – SE-128 21 Skarpnäck – Sweden Tel : +46 (0)8-447 53 00 – Fax : +46 (0)8-447 53 20 info@profoto.se www.profoto.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Page Count : 17 XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:ad568d0e-60a4-11d9-b73d-000d93b1ed32 X Press Private : %%DocumentProcessColors: %%EndComments Producer : Acrobat Distiller 6.0.1 for Macintosh Create Date : 2005:01:07 12:56:39Z Modify Date : 2005:01:07 13:07:18+01:00 Creator Tool : QuarkXPress(tm) 6.5 Metadata Date : 2005:01:07 13:07:18+01:00 Document ID : uuid:ae192f4a-60a3-11d9-a4aa-000d93b1ed32 Format : application/pdf Creator : Christer R Fjellman Title : Pro-7_Manual030614 Author : Christer R FjellmanEXIF Metadata provided by EXIF.tools