Promark 9E3SPHT Wireless Microphone User Manual DKW DUO manaual

Nady Systems Inc Wireless Microphone DKW DUO manaual

Users Manual

OPERATIONHANDHELD MIC TRANSMITTER1. Unscrew the BATTERY COMPARTMENT COVER (6) and remove. Insert a fresh alkaline 9V BATTERY (9),observing correct polarity asmarked, and screw the cover back on to the microphone. To ensure proper battery contact, the cover must be screwed on completely2.Turn on the handheld mic by sliding the OFF/STANDBY/ON (10) switch to the ON position. The BATTERY INDICATOR LED (11) willlight up continuously, indicating usable battery strength. In the case of a dead or low battery, the LED will either light dim or not light at all,indicating that the battery should be replaced with a fresh one3. The microphone is now ready to use. The corresponding LED INDICATORS (7) on the American Starpower™ X2 receiver should now be lit,indicating a received signal from the transmitter on that channel. 4. The two channels are labeled red and blue, both on the front panel of the receiver and on the band label on the microphone just under the micball grill. This color coding enables visual display of which transmitter is turned on and transmitting to the receiver. Both channels can be usedsimultaneously and this is the preferred method of operation. Single channel operation is also possible. Occasionally, depending on the radiosignal environment in which you are using the system, you might encounter static-type noises during single channel operation caused by receivedradio interference on the open, unused channel which is also mixed into the audio output you areamplifying. If this happens turn on the secondmicrophone transmitter, and if not using, leave nearby (~5—10 feet away) with the OFF/STANDBY/ON (10) switch in the STANDBY position,which means the transmitter is operating but the audio input is muted. The second channel’s LED (7) should now also be lit. This should eliminatethe interference static.[Note: Observe care in selecting amplified volume, transmitter location and speaker placement so that acoustic feedback (howling or screeching)will be avoided.]OVERALL SYSTEM PERFORMANCEFrequency Response: 80-12,000 Hz, +/-3dBDynamic Range: 80dBTotal Harmonic Distortion: <3%RF Carrier Frequency Range: 81-87 MHzFrequency Stability: +/- 0.005%Modulation: FM (F3E), +/-75KHz max.Operating Range: 100 ft. typical-up to 200+ ft. line-of-sightTRANSMITTERAudio Input: unidirectional dynamic cartridgeControls: OFF/STANDBY/ON switchLED Indicator Unit: “ON” RF Power Out: Up to 50mW (Max. allowed by FCC)Harmonic & Spurious Emissions: <-40dBBattery: 9V AlkalineBattery Life: Up to 15 hoursDimensions (L x Dia): 9.5” x 1.3” x 2”, (24.2cm x 3.2cm x 5.1cm)Weight (w/o battery): 6.0 oz., (170g.)RECEIVERControl: Power ON/OFFConnector: 1/4” unbalanced audio out jack (both channels mixedtogether) LED Indicator: Power ON, Transmitter RF (one each, both channels)Antennas: 15.3”, (38.8cm), dual collapsible antennas Power Requirement: AC/DC 9VDC/0.2ADimensions (W x H x D): 11.8”x 1.8”x 4.5”, (29.9cm x 4.5cm x 11.5cm.)Weight: 11.3 oz., (320g.)Specifications subject to change for product improvement purposes(U.S.) Should your Nady American Starpower™ X2 Wireless Microphone System require service, please contact the Nady Customer ServiceDepartment via telephone: (510) 652-2411 or e-mail: service@nady.com.(INTERNATIONAL) For service, please contact the Nady distributor in your country through the dealer from whom you purchased thisproduct.The warranty card supplied with this system provides valuable warranty and service information. Store it in a safe place for futurereference. Do not attempt to service this unit yourself as it will void your warranty.NADY SYSTEMS, INC.6701 Shellmound Street • Emeryville, CA 94608 • Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.comSPECIFICATIONSERVICEPantone 185 Red/BlackBlack(9) (8)(10)(11)

Navigation menu