Promethean 015 ActiveBoard 300 Pro Series User Manual manual

Promethean Ltd ActiveBoard 300 Pro Series manual

manual

activboard 300 pro rangeInstallation GuideTP1741Issue 2
COPYRIGHT INFORMATION © 2010 Promethean Limited. All rights reserved.This guide is distributed with the product. It may only be reproduced for use within the institution in which the product is used. For use outside of your institution, no part of this guide may be reproduced, transmitted, stored in a retrieval system or translated into any other language without the prior permission of Promethean Limited. Please note that the content in this guide is protected under copyright law. Although every care has been taken in  the  compilation  of  this  guide,Promethean  Limited  accepts  no  responsibility  for  errors  or  omissions,  or  for damages resulting from the use of information contained within the following pages.
contentsWelcome  4Safety Information   4Compliance   5Installation  6
4   WELCOMESAFETY INFORMATIONINSTALL THE SOFTWAREPower Supply UnitThe  Activboard  300  Pro  range  is  powered  by  a power supply unit branded Promethean and type DT6018 or DPS-60SB A. This  is  the  only  approved power  supply  unit.  Do not  connect  any  other  power  supply  unit  to  the ActivBoard 300 Pro range.The power supply unit is supplied with a suitable mains input lead specic to your country.The power supply unit may also be supplied with more than one mains input lead, to accommodate countries with more than one type of mains outlet socket.  Only  use  the  mains  lead  which  is  compatible  with your  mains  outlet socket.  Do  not  attempt  to  modify the mains lead. If you are unsure of the electrical compatibility of your  equipment,  please  contact  Promethean  or an  authorised  Promethean  service  agent  before attempting to connect the power supply unit to the mains supply.The power supply unit does not contain any user serviceable parts and must not be opened. If you suspect  that  the  power  supply  unit  is  faulty,  you should contact an authorised Promethean service agent to obtain a replacement.Inspect the power supply unit for physical damage to the casing before  use. If  damage is  apparent, take care to avoid contact with any potentially live parts. Disconnect the power supply unit from the mains  supply  at  the  wall  socket  and  contact  an authorised Promethean service agent for advice.The  ActivBoard  does  not  contain  any  user serviceable parts. You should not attempt, under any  circumstances,  to  gain  access  to  internal parts of the unit.  If  the  ActivBoard  is  suspected  to  be  faulty  or damaged  contact  Promethean  or  an  authorised Promethean service agent for advice.Environmental ConsiderationsOperating Temperature Range: 0°C to +50°CStorage Temperature Range: -20°C to +70°CHumidity (non condensing) 0% to 90%Thank you for purchasing an ActivBoard from Promethean. We recommend using our ActivBoard with our latest software, ActivInspire Professional Edition, which can be downloaded from  www.prometheanplanet.com. For more information on the ActivClassroom by Promethean and  other products available please visit  www.prometheanworld.com. Environmental ConsiderationsOperating Temperature Range: 0 C to +50 CStorage Temperature Range: -20 C to +70 CHumidity (non condensing) 0% to 90%This document must be left with the product after installation. Please retain for your records.
   5INSTALL THE SOFTWAREUnited States of AmericaThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: This device may not cause harmful 1. interference.  This device must accept any interference 2. received, including interference that may cause undesired operation. Changes or modications to this equipment not expressly  approved  by  Promethean  may  void the user’s authority to operate this equipment. For non-intentional radio parts, this equipment has been tested and found to comply with the limits  for  a  Class  B  digital  device,  pursuant to part 15 of  the FCC  Rules. These  limits are designed  to  provide  reasonable  protection against  harmful  interference  in  a  residential installation. This  equipment  generates,  uses  and  can radiate  radio  frequency  energy  and,  if  not installed  and  used  in  accordance  with  the instructions,  may  cause  harmful  interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If  this  equipment  does  cause  harmful interference  to  radio  or  television  reception, which  can  be  determined  by  turning  the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. CanadaThis device complies with RSS-210 of Industry Canada.  Operation  is  subject to  the following two conditions:1.  This device may not cause harmful interference.  2.  This device must accept any interference received, including Interference that may cause undesired operation. Changes or modications to this equipment not expressly  approved  by  Promethean  may  void the user’s authority to operate this equipment. This  device  also  complies  with  RSS-102  of Industry Canada. This  Class  B  digital  apparatus  complies  with Canadian ICES-003.EuropeThe  radio  interface  on  this  product  (when tted)  is  intended  for  use  with  Promethean radio  devices  for  operation  in  the  following countries: Austria,  Belgium,  Bulgaria,  Cyprus,  Czech Republic, Denmark,  Estonia, Finland, France, Germany,  Greece,  Hungary,  Iceland,  Ireland, Italy,  Latvia,  Lithuania,  Luxembourg,  Malta, Netherlands,  Norway,  Poland,  Portugal, Romania,  Slovak  Republic,  Slovenia,  Spain, Sweden,  Switzerland,  United  Kingdom.  Declaration of Conformity StatementContact  Promethean  for  a  copy  of  the Declaration of Conformity for this product.COMPLIANCE
6   150mm (6”)600 - 950mm(23.6 - 37.4in)587.5mm(23.1in)1175mm(46.26in)670mm(26.4in)1216-25kg35-55lbINSTALL ATION
   718V60W PSUDT 60182.4ActivHub18V60W PSU2.4ActivHubDT 6018
8   C ALIBR ATION18V5Vvolumewww.prometheanplanet.com
   9SUPPORT Asia Pacic+86 (0) 755 2983 2826 (English)PrometheanRoom 2505 Sino Plaza255-257 Gloucester RoadCauseway BayHong KongAmericasCall toll free, 1-888-65-ACTIV or 1-888-652-2848 Promethean1165 Sanctuary ParkwaySuite 400Alpharetta, GA 30009USAUK, Middle East and AfricaCall 0844 855 2201 between 8am and 5.30pm, Monday to FridayPrometheanPromethean HouseLower Philips RoadBlackburnLancashire BB1 5THUK http://www.prometheankb.com/
penSOFTWARE SLATE VOTE SUPPORTACTIVboard

Navigation menu