Promethean 016 500 Pro Series Interactive Whiteboard User Manual TP1796North America V2 indb

Promethean Ltd 500 Pro Series Interactive Whiteboard TP1796North America V2 indb

manual

 e ActivClassroom by PROMETHEANUser GuideActivBoard 500 PRO
TP 1796 Issue 1 © 2010 Promethean Limited. All rights reserved. is guide may only be reproduced for use within the institution in which the product is used. For use outside of your institution, no part of this guide may be reproduced, transmitted, stored in a retrieval system or translated into any other language without the prior permission of Promethean Limited. Please note that the content in this guide is protected under copyright law. Although every care has been taken in the compilation of this guide, Promethean Limited accepts no responsibility for errors or omissions, or for damages resulting from the use of information contained within the following pages.
WelcomeSafety information Set UpCalibrationGetting startedCompliance 445568
4install onto building structure before use. promethean recommend the activboard pro is installed by an approved ﹙promethean﹚ certified installer. full details of certified installers can be found through your authorised promethean distributor.WelcomeSafety information ank you for purchasing an ActivBoard from Promethean. We recommend using our ActivBoard with our latest software, ActivInspire Professional Edition, which can be downloaded fromwww.prometheanplanet.com/activinspire Acquire thousands of great lessons, resources and teaching ideas from our free online community, Promethean Planet. While you’re there, enroll in one of our ActivLearning courses. Just create a user account and you will have access to a wealth of teaching resources and courses that will help you achieve your teaching and learning goals. www.prometheanplanet.com/activlearning Part of the Activclassroom, your Activboard along with ActivInspire software, was designed to be an innovative and integrated whole group learning environment which encourages active student participation in lessons. For more information on the ActivClassroom by Promethean and other products available please visit www.prometheanworld.com. e ActivBoard 500 Pro range is powered by a power supply unit branded Promethean and type DPS-90GB A or 153413.  is is the only approved power supply unit. Do not connect any other power supply unit to the ActivBoard 500 Pro range. e power supply unit is supplied with a suitable mains input lead specifi c to your country.  e socket outlet shall be installed near the equipment and shall be easily accessible. e power supply unit may also be supplied with more than one mains input lead, to accommodate countries with more than one type of mains outlet socket. Only use the mains lead which is compatible with your mains outlet socket. Do not attempt to modify the mains lead. If you are unsure of the electrical compatibility of your equipment, please contact Promethean or an authorised Promethean service agent before attempting to connect the power supply unit to the mains supply. e power supply unit does not contain any user serviceable parts and must not be opened. If you suspect that the power supply unit is faulty, you should contact an authorised Promethean service agent to obtain a replacement.Additional support and information on Promethean products can be found on Promethean’s knowledgebase.www.prometheankb.comInspect the power supply unit for physical damage to the casing before use. If damage is apparent, take care to avoid contact with any potentially live parts. Disconnect the power supply unit from the mains supply at the wall socket and contact an authorised Promethean service agent for advice. e ActivBoard does not contain any user serviceable parts. You should not attempt, under any circumstances, to gain access to internal parts of the unit. environmental considerationsOperating Temperature Range: 0°C to +40°C (32°F to 104°F)Storage Temperature Range: -20°C to +60°C (-4°F to 140°F)Storage Humidity: 10% to 90% (non-condensing)
5Set UpDPS-90GB A or 153413DPS-90GB A or 15341342-50kg98-112lb is section describes how you can check if your ActivBoard needs calibrating.When using an ActivBoard, you may need to re-calibrate if the whiteboard or projector have been moved for any reason. Calibration aligns the tip of the ActivPen to the cursor on the screen.does your activboard need calibrating?With both the ActivBoard and the computer switched on, hold the ActivPen lightly on the ActivBoard, without pushing in the ActivPen nib.  e cursor, on the ActivBoard, should line up with the tip of the ActivPen. If it does not, you need to calibrate the ActivBoard.three ways to calibrate your activboardHow you calibrate the ActivBoard depends on the type of ActivBoard.method Hover the ActivPen over the Calibration light in the top-left corner of the ActivBoard for a few seconds. Follow the on-screen instructions. method Right-click on the ActivManager icon in the bottom right-hand corner of the display.Select Calibrate. Follow the on-screen instructions.Check that the tip of your ActivPen lines up with the cursor on the ActivBoard. If it does not, try Method 3.method On your computer:Right-click on the ActivManager icon in the bottom right-hand corner of the screen.Select Calibrate.Once the calibration program starts, move to the board and follow the on-screen instructions.After calibrating, check that the tip of your ActivPen lines up with the cursor on the ActivBoard. If it does not, reset the board by switching it off for thirty seconds. en switch it on and try calibrating again, or contact technical support.Calibration
6Getting startedwww.prometheanplanet.com/activinspire
713445656565610010101010100203040506070080888090010011011111112112120120130140150505000102 34 561002 03 04 05 06 07 08 09 0 100 110 120 130 140 1502131221
8united states of america is device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1.  is device may not cause harmful interference. 2.  is device must accept any interference received, including interference that may cause undesired operation. Changes or modifi cations to this equipment not expressly approved by Promethean may void the user’s authority to operate this equipment. For non-intentional radio parts, this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.  ese limits are designed to provide reasonable protection against harmful interference in a residential installation.  is equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. canada is device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions:1.  is device may not cause harmful interference. 2.  is device must accept any interference received, including Interference that may cause undesired operation. Changes or modifi cations to this equipment not expressly approved by Promethean may void the user’s authority to operate this equipment.  is device also complies with RSS-102 of Industry Canada.  is Class B digital apparatus complies with Canadian ICES-003.europedeclaration of conformityPromethean hereby declare that the devices are in compliance with the essential requirements of the RTTE directive 1999/5/EC. Please contact Promethean for a copy of the Declaration of Conformity if required. radio interface e radio interface on these products is intended for use with other Promethean radio devices for operation in the following countries:Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, United Kingdom.waste electrical and electronic equipment ﹙weee﹚For more information concerning the correct disposal of these products, please contact your Promethean reseller.Compliance
9
TP 1796 Issue 1 © 2010 Promethean Limited. All rights reserved.

Navigation menu