Proscan Tv Users Manual

RCA Direct View Digital 27 to 40 TV Manual 97100067 RCA Direct View Digital 27 to 40 TV Owner's Manual, RCA Direct View Digital 27 to 40 TV installation guides

CRT Television to the manual 9d9e9967-9347-47bf-815d-8a77bbf90536

2015-01-21

: Proscan Proscan-Proscan-Tv-Users-Manual-235970 proscan-proscan-tv-users-manual-235970 proscan pdf

Open the PDF directly: View PDF .
Page Count: 88

TO REDUCE THE RISK OF ELECTRICSHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLEPARTSINSIDE. REFERSERVICING

TO QUALIFIED SERVICEPERSONNEL.

i_ his symbol indicates

"dangerous voltage" inside

the product that presents a

risk of electric shock or

personal injury.

This symbol indicatesimportant instructions

accompanying the

product.

WARNING

To reduce the risk of fire or

shock hazard, do not expose

this TV to rain or moisture.

Caution: To reduce the risk of electric shock, match wide

blade of plug to wide slot, fully insert.

Attention: Pour eviter les chocs electriques, introduire la

lame la plus large de la fiche dans la borne

correspondante de la prise et pousser jusq_ au fond.

Refer to the identification/rating label located on the back panel of your

product for its proper operating voltage.

FCC Regulations state that unauthorized changes or modifications to this

equipment may void the user's authority to operate it.

If fixed (non-moving) images are left on the screen for long periods, they

may be permanently imprinted on the screen. Such images include

network Iogos, phone numbers, and video games. This damage is not

covered by your warranty. Extended viewing of channels displaying

these images should be avoided.

This reminder is provided to call your attention to Article 820-40 of the

National Electrical Code (Section 54 of the Canadian Electrical Code, Part

1) which pPovides guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected to the grounding

system of the building as close to the point of cable entry as practical.

NOTE TO CABLE

TV INSTALLER

Safety Information ............................................... i

First Things First ................................................. 3

Using the Menu System ...................................... 7

The Menu Rule: Point and Select ....................................................... 8

Menus and Control Panels ................................................................. 9

Interactive Setup .............................................. 17

Enteringthe Interactive Setup ........................................................... 18

Connect the TV ................................................................................ 19

Searchfor Channels ......................................................................... 19

Set the Time ..................................................................................... 19

Editthe Channel Labels .................................................................... 20

Programming the Remotes ................................ 21

Programming the Universal Remote ................................................. 22

To Control a VCR ............................................................................. 22

To Control a ProScan, RCA, or GE Brand DSS®Receiver .................. 24

To Control a Satellite Receiver .......................................................... 24

To Control a Cable Box .................................................................... 25

To Control a Laserdisc Player ........................................................... 26

To Control an Audio Component ...................................................... 26

Programming the Simple Remote ..................................................... 28

Using the Simple Remote to Control a Component .......................... 30

Tour of the TV ................................................... 31

Remote Buttons ................................................................................ 32

Simple Remote Buttons .................................................................... 34

Channel Marker ............................................................................... 35

Back Panel ....................................................................................... 36

Front Panel ....................................................................................... 38

Quick Reference Guide .................................... 39

Audio Menu ..................................................................................... 40

Picture Quality Menu ....................................................................... 42

Screen Menu .................................................................................... 43

Time Menu ....................................................................................... 44

Channel Menu ................................................................................. 45

Assistance ........................................................................................ 49

Advanced Features ........................................... 51

PIX+ Operation ................................................................................ 52

Two Tips for Using PIX+ Buttons ...................................................... 53

Closed Captioning ............................................................................ 54

On-screen Program Details .............................................................. 56

Choosing an Audio Processor ........................................................... 57

Using and Modifying Fetch .............................................................. 58

Displaying On-Screen Help ............................................................. 59

Appendices ....................................................... 61

Things to Know Before Connecting Components .............................. 61

Appendix A: Connections ................................. 62

Connection A: TV Only .................................................................... 62

Connection

B: TV and Mono VCR .................................................... 63

C: TV and Stereo VCR ................................................... 64

D: TV and Stereo VCR Using a Splitter .......................... 65

E: TV and Satellite Receiver ........................................... 66

F: TV, VCR and Satellite Receiver .................................. 67

G: TV, VCR and Satellite Receiver Using a Splitter ........ 68

H: Adding a Laserdisc Player ......................................... 70

Appendix B: Connecting External Speakers ...... 71

Connecting External Speakers .......................................................... 71

Connecting Audio Components ....................................................... 72

Connecting a Camcorder for Playback ............................................. 73

Connecting a Camcorder to Record from TV .................................... 74

Appendix C: Troubleshooting Tips .................... 75

Appendix D: Limited Warranty ......................... 77

Appendix E: Care and Cleaning ........................ 78

Accessories ....................................................... 79

Index ................................................................ 82

DSS®is a registered trademark of DirecTV Inc., aunit of GM Hughes Electronics Corporation

ALLOW ME TO INTRODUCE MYSELF...

My name is Scott, and I wrote this ProScan

User Manual. You probably weren't expecting a

personal introduction, but then, a ProScan TV

is designed to give you more than you

expectedmand that includes the User Manual.

AN 80-PAGE INSTRUCTION BOOK?

You used to be able to buy aTV, plug it in, stick

arabbit on top of it (or the ears, anyway), and

you were off and running. Watching. Whatever.

Times have changed, though. But don't worry, it

looks more complicated than it is.

YOU'VE NEVER SEEN ANYTHING

LIKE IT...

rll bet you've never seen anything like thisTV.

Don't believe me? Press the MENU button on

the remote. That's the Main Menu. Times have

definitely changed.

READ THE FIRST FOUR SECTIONS

The first four sections of the manual take you

through all the steps needed to set up theTV.

The remaining chapters and appendices

provide additional information. You can thumb

through these sections whenever you get some

time; if you have a specific question, refer to

the table of contents or the index.

1FIRST THINGS FIRST

STEP 1 :UNPACK THE TV AND

ACCESSORIES

The accessories packed with TV include the Universal Remote, the

Simple Remote, six AAA batteries, an antenna adapter, and an audio/

video.adapter for plugging your camcorder into the front of the TV. Be

sure to locate the Connections Foldout.

Important Information:

Optional Stand for Table Model TVs ONLY

CAUTION: Matching stands were designed to be used with

specific 25-inch and larger table model TVs. All recommended

stands come with hardware to secure your TV to the stand so

that it cannot be easily pulled off, pushed off, or tipped over. Your

television dealer can help you choose an appropriate stand.

If you choose not to use a recommended stand for your TV: Make

sure that the stand or other furniture on which you place the TV is

properly located and of adequate size and strength. This will help

prevent the TV from accidentally being pulled off, pushed off, or

tipped over. Failure to use a proper stand could cause damage to

the -IV and/or personal injury.

vck _r,ou_

_lc_ sl_ _uusE

_. L 't , ".

_ _-_ ,,_

<2_, ,5"

2:_2

@@®@

gg e

STEP 2: CONNECT YOUR TV

If you're only going to connect the TV to your home antenna or cable

box, use the "TV Only" connection shown below. If you're going to

connect the TV to a VCR, laser disc player or other component, skip to

the top of the next page.

TV ONLY

This is a basic connection from an antenna or cable box to your TVo

Connect the cable as shown. If you have a VCR or other components

to connect to the TV, skip to the top of the next page.

TV WITH OTHER COMPONENTS

Use the Connections Foldout to connect your TV to a VCR, satellite

receiver, or laserdisc player. See AppendixA, p. 62 for detailed

information about using each of these connections. After connecting

the T.V,proceed to Step 3, below.

If your components don't match those shown on the Foldout, or if you

prefer a different connection, see your dealer or the specific

component user manuals.

STEP 3: PLUG IN THE TV

Plug the power cord into the wall outlet, matching the wide

blade of the plug with the wide slot in the outlet. Be sure to insert

the plug completely.

STEP 4: INSTALL BATTERIES

1. Slide the battery compartment cover off the back of the remote.

2. Insert the four AAA batteries as shown, matching the + and - ends

of each battery in the compartment.

3. Replace the cover.

4. Repeat these directions to insert the two remaining AAA batteries

into the simple remote.

STEP 5: TURN ON THE TV

PressTV. on the remote, or press POWER on the TV itself.

STEP 6

Read the next section, Using the Menu System, which is a brief overview

of the basic rules for getting around in the menus.

STEP 7

Proceed to section three, Interactive Setup. This setup routine walks you

through the steps needed to fully configure the TV. Part two of the setup

routine puts available cable TV or antenna signals into the TV's memory.

This is called "auto channel search." You must complete the auto channel

_lrch. After you complete this step, you can skip any of the remaining

steps and return to them later.

VCR SAT'CABLE

AM-EM TAPE AUX

REVERSE PLAY FORWARD

RECORD STOP PAUSE

CH GUIDE SKIP

MUTE GO BACK

FAV'INPUT ANTENNA

INFO CLEAR RESET SCAN

MENU _FETCH

PiP POP SPLIT CH CTRL

SIZE SWAP FREEZE

Interactive Setup is designed to be 1

used with the Connections Foldout.

A LIVING ROOM IN MY LIVING ROOM?

You access the TV's features through an

on-screen menu system. The first menu in the

system looks like a living room, hence its name:

the Living Room Main Menu. You use the

Living Room Main Menu to get to other menus,

such as the Audio Menu. USING "THE

MENU SYSTEM

THE MENU RULE: POINT AND SELECT

You only need to know one rule to use the on-screen menus:

point and select.

WHAT IS POINT AND SELECT?

The point and select method has two steps.

1. Point to a menu item using the MOVE arrows on the remote.

To point up or down, press the up or down arrows. To point left or

right, pressthe left or right arrows.

2. Select a menu item by pressing MENU.

Selecting an item tells the TV's menu system to go ahead and make

a change or go to a place you have indicated.

For example, to select the Channel menu from the Main Menu:

1. PressMENU to bring up the Main Menu. The Main Menu looks

like a Living Room.

2. Point to the picture of the remote control by pressing the down

arrow until the word "Channel" appears.

3. PressMENU to select Channel. The Channel menu comes up.

4. Point to Exitand press MENU to return to the Main Menu.

5. Point to Exitand press MENU to leave the menu system and return

to TV viewing.

Once you know how to point and select your way through the menus,

you can apply this rule in the menus and the control panels that do the

real work of the menu system.

MENU (_

(_ MOVE

SELECT

[}

Press CLEAR at any time to remove

all displays from the screen and return

to TV viewing.

MENUS, CONTROLS AND

CONTROL PANELS

There are three parts to the menu system: menus, controls, and control

panels. Before you can use the contols and control panels to adjust

your TV, you have to move through the Main Menu and select

a control.

THE LIVING ROOM MAIN MENU

To bring up the Living Room Main Menu:

1. PressMENU on the remote or front panel.

The Living Room Main Menu contains eight items that you can select:

six menus and two buttons. Let's take a look at the buttons first.

The Exit Button

All menus have an Exit button. Selecting the Exit button always takes

you to the previous screen. Selecting the Exit button from the Main

Menu returns you to regular TV viewing. For example,

1. PressMENU to bring up the Living Room Main Menu. Point to Exit.

2. PressMENU. The Living Room disappears.

The Help Button

All menus have a Help button. For example, selecting the Help button

from the Main Menu brings up all of the help balloons for the

Living Room.

1. PressMENU to bring up the Living Room Main Menu.

2. Point to the Help button and press MENU. The help

balloons appear.

3. PressMENU again. The help balloons disappear.

The rest of the Help buttons in the menu system bring up helpful

information explaining one aspect of that menu.

THE MENUS

There are six menus available from the Living Room Main Menu.

When you point to different items in the Living Room, a different

menu highlights. PressMENU on the remote to select the

highlighted menu.

To exit a menu

There are two ways to exit a menu:

• Point to Exitand press MENU.

• Press CLEAR. The on-screen displays clear from the screen and you

return to TV viewing.

CONTROLS

Controls do the work in the menu system. Using the controls, you can

choose a setting, enter a number, or adjust a level such as tint or

brightness. There are three kinds of controls: sliders, toggles, and

path buttons.

Sliders

Use sliders to adjust a particular setting in a menu.

For example, to adjust the TV's tint:

1. PressMENU to bring up the Living Room Main Menu.

2. Point to the Picture Quality Menu and press MENU. (The Picture

Quality menu is the TV's front panel, just below the TV screen.) The

Picture Quality Menu appears.

3. Point to Tint.

4. Point left or right to adjust the indicator line. Notice that the picture

changes as you adjust the tint.

5. PressCLEAR to remove the display from the screen.

Now that you know how the Tint slider works, you know how all

sliders work.

Tint

Toggles

Use toggles to choose a particular setting from several

available settings.

For example, to indicate which antenna you are using:

1. PressMENU to bring up the Living Room Main Menu.

2. Point to Channel (the remote control on the table) and press

MENU. The Channel Menu appears.

3. Point to Signal Source. The Signal Source toggle highlights. The

current setting for Signal Source appears at the bottom of

the toggle.

4. Point left or right to indicate the correct setting for

your connection.

5. PressCLEAR to return to TV viewing.

Now that you know how the Signal Source toggle works, you know

how all toggles work.

Path Buttons

A path button is a control that takes you to part of the menu system.

You can recognize a path button by its distinctive arrow-shape. The

Lists and Labels control in the Channel Menu, above, is a path button.

You don't need to remember the

names of the types of controls. Once

you've learned how each type works,

you'll be able to use any part of the

menu system.

CONTROL PANELS

Control panels can contain different types of controls, such as numeric

entry, sliders, and checkboxes, that let you adjust the TV. A slider in a

control panel works just like a slider in a menu. Numeric entry and

checkboxes are described below.

Numeric Entry

A control panel with a numeric entry control allows you to enter

numbers and letters.

For example, to set the current time:

1. PressMENU to bring up the Living Room Main Menu.

2. Point to ]]me (the clock) and press MENU. The Time Menu appears.

3. Point to Set Time and Day. The Set Time and Day numeric entry

control panel appears to the right of the menu.

4. Press MENU. The plus sign and the hours and minutes field

are highlighted.

5. Press MENU repeatedly, or press and hold MENU for 'fast mode', to

set the time forward. To set the time back, point to the minus sign

and press MENU.

6. Pressthe right arrow to move to the next column, then press MENU

to switch between AM and PM.

Pressthe right arrow to move to the next column, then press MENU

repeatedly to move the day forward. Point to the minus sign and

press MENU to move the day backwards.

When you have entered the correct time, press the left arrow to

return to Set Time and Day.

9. PressCLEAR to return to normal viewing.

SetTmend

{

You can also use the number buttons

for numeric fields such as channels

and times.

Checkboxes

Use checkboxes to add a particular channel to a list of channels, or to

remove the channel from a list.

For example, to add channel 13 to your list of favorite channels:

1. PressMENU to bring up the Living Room Main Menu.

2. Point to Channel (the remote control) and press MENU. The

Channel menu appears.

3. Point to Lists and Labels and press MENU. The Lists and Labels

control panel appears. The Normal channel list checkbox

is highlighted.

Lists dLabeLs

4. Point up repeatedly until channel 13 highlights.

5. Point right until the Fav checkbox highlights.

6. PressMENU to put channel 13 into the Favorite channel list. A

check mark appears in the box. To remove channel 13 from the

list, press MENU again.

7. PressCLEAR to return to normal viewing.

Now that you know how the Favorite Channel checkbox works, you

know how all checkboxes work.

EXPLORE, EXPLORE, EXPLORE!

Once you've learned the basics, feel free to poke around in the menu

system. The context-sensitive help at the bottom of the screen provides

instructions for getting through any particular menu or control panel.

Remember, press CLEAR at any time to leave the menu system and

return to regular TV viewing.

When you've had your fill, proceed to the next section of the manual,

Interactive Setup.

THERE'S AN ON-SCREEN SETUP ROUTINE

YourTV has an interactive setup routine that walks you

through the steps needed to configure theTV. There

are five sections:

•Connect theTV

• Search for available channels

• Set the time and day

• Set speaker configuration

•Make channel lists and labels

3INTERACTIVE SETUP

ENTERING THE INTERACTIVE SETUP

The interactive setup routine is accessed through the Assistance Menu:

1. Press MENU to bring up the Living Room Main Menu.

2. Point to Nipper to highlight the Assistance menu and press MENU.

The Assistance menu appears with the Setup control highlighted.

3. PressMENU to select Setup. You are asked if you want to begin the

setup routine. PressMENU to begin.

•i

You must complete the Search for

Channels to receiveTV signals and put

channels in memory.

You can also accessSearch for Channels

through the Auto Channel Search

control in the Channel Menu.

STEP 1 : CONNECT THE TV

This section of the setup asks questions about the components you

have and walks you through the steps needed to connect your TV

to a VCR, satellite receiver, and laserdisc player. If you used the

Connections Foldout to connect your TV, you can skip this step or

follow along for the sheer fun of it. If you haven't connected your TV

to any other components, answer the questions and follow the

on-screen instructions.

1. Follow the on-screen instructionsto connect your TV and other

components. When you complete these instructions, you are

automatically taken to the next step in the interactive setup routine.

STEP 2: SEARCH FOR CHANNELS

7:he second step automatically searches for all channels available

through your antenna or cable TV system. This is also called

"Automatic Channel Search."

1. Follow the on-screen instructionsto complete the automatic

channel search.

2. When the channel search is completed, press MENU to go to the

next step.

About the Remaining Steps

The remaining steps let you set the time and day, set up your speakers,

place channels in various lists, and label each channel. Some of these

steps, such as setting up your channel lists, can be time consuming.

Feel free to skip any or all of these steps and return to them later.

STEP THREE: SET THE TIME

1. Follow the on-screen instructions to set the time and day of

the week.

2. Point to Exitand press MENU to go to the next step.

A tip from Keith, the

Designing Engineer:

When you use the Lists and Labels

control panel, use the arrows to point

to any channel or field. Use the CHAN

buttons to point up or down to any

checkmarked channel in whichever

field you have selected.

STEP FOUR: SET THE SPEAKER

CONFIGURATION

This step lets you tell the TV how many speakers you have connected

to your TV.

1_. Point to the speaker setup that matches your system.

2. Point to EXIT and press MENU to go to the next step.

STEP FIVE: EDIT CHANNEL LABELS

This step lets you set up your channel lists and assign or build labels

for your channels.

1. Follow the on-screen instructions to set up your channels and

channel lists.

2. Point to EXIT and press MENU to complete the interactive setup.

WHAT NOW?

Now that you've finished the interactive setup, you can sit back, relax,

and enjoy the TV. Or...

Program the Remote

Since you've gone this far, in just a few minutes you can program the

remote control to work with your VCR, laserdisc player, and other

component. To find out how to program both of the remotes, go to the

next section.

YOU HAVE AVCR OR

OTHER COMPONENT...

The universal remote can be programmed to

control most brands of remote controllable

TVs,VCRs, and cable boxes. Most ProScan,

GE, and RCATVs and VCRs are already

programmed. Other manufacturers' brands

need to be programmed.

The simple remote can be programmed to

control most remote controllable VCRs.

lOW WATCH SOME TV!

Once you've programmed the remote, you

will have completed all four setup sections.

Now you can sit back and enjoy the TV. If you

want to know more about the different parts

of the TV, see the next section, Tour of the TV.

Refer to the other sections and appendices

as needed.

4PROGRAMMING

THE REMOTE

PROGRAMMING THE

UNIVERSAL REMOTE

You can program the universal remote to control most brands of

remote controllable TVs, VCRs, and cable boxes. If you have an

PROSCAN, GE, or RCA VCR, you may not need to program the remote

at all. Other manufacturer's brands need to be programmed.

Programming the Universal Remote to Control a VCR

[o determine whether you need to program the universal remote, turn

on the VCR, point the remote at the VCR and press the VCR1 button.

Then, press POWER or CHAN A or CHAN v to see if the VCR responds

to the remote commands. If not, you need to program the remote.

Follow these steps to program your universal remote to control

your VCR:

1. Turn on the VCR to be programmed.

2. Look up your VCR brand and code number(s) in the code list on the

next page or on the code sheet packed with your remote.

3. Pressand hold the VCR1 button on the remote.

Enter the two-digit code from the code list.

Release VCR1, then press POWER to see if the VCR responds to the

remote commands. If it doesn't, try pressing VCR1 and POWER to

see if the VCR responds.

Repeat steps 3 through 5 using the next code listed for your brand

until the VCR responds to the remote commands.

VCR SAT,CABLE

AMoFM TAPE AUX

@ ® 0

REVERSE PLAY FORWARD

RECORD STOP PAUSE

CH GUIDE SKIP '_"

MUTE GO BACK

@@@

¢,@@

@@@

FAV'INPUT ANTENNA

o @ o

INFO CLEAR RESET SCAN

MENU (_ FETCH

SELECT

PIP POP SPt.IT CH CTRL

SIZE SWAP FR[[_E

This remote may not operate all

models of the brands shown on the

next page.

To program the DVD.VCR button to

control a secondVCR, follow the steps

on this page, but use the DVD-VCR

button instead of theVCRI button.

For instructions on programming the

simple remote, see page 28.

•

•Universal RemoteVCR Codes •

Admiral ............................................. 006

/\iwa ................................................... 015

Akai ........... 003,017,022,023,063,066

Audio Dynamics ...................... 014,016

Bell&Howell ..................................... 002

Broksonic ......................................... 010

Candle .............................. 007,009,013,

.................................... 044,045,046,052

(_-annon ..................................... 008,053

Capehart ........................................... 00 I

Citizen .............................. 007,009,013,

.................................... 044,045,046,052

Colortyme ........................................ 014

Craig .......................................... 007,012

Curtis Mathes ......... 000,007,008,014,

.................... 015,044,046,053,064,067

Oaewoo ............................ 013,045,052

dbx ............................................. 014,016

Dimensia ........................................... 000

Dynatech .......................................... 015

Electrohome .................................... 027

Emerson ........... 008,009,010,013,015,

................... 020,023,027,034,041,042,

.....047,049,057,062,065,067,068,070

Fisher ..002,012,018,019,043,048,058

Funai .................................................. 015

GE .............. 000,007,008,032,037,053

Goldstar .................... 009,014,046,060

Harman Kardon .............................. 014

Hitachi ....................... 005,015,035,036

Instant Replay .................................. 008

JCL ..................................................... 008

JC Penney ........ 002,005,007,008,014,

............................ 016,030,035,051,053

JVC.....................002,014,016,030,046

Kenwood .. 002,014,016,030,044,046

Lloyd's................................................015

Logik ..................................................03 I

Magnavox..................008,029,053,056

Marantz ....002,008,014,016,029,030,

............................................044,046,06 I

Marta .................................................009

MEI .....................................................008

Memorex ..................008,009,012,015

MGA ..........................................004,027

Midland ..............................................032

Minolta ......................................005,035

Mitsubishi ..........004,005,027,035,040

Montgomery Ward .........................006

MTC ..........................................007,015

Multitech ...................007,015,031,032

NEC ..........................002,014,016,030,

............................044,046,059,061,064

Panasonic..................................008,053

Pentax................................005,035,044

Pentex Research...................._........046

Philco.........................008,029,053,056

Philips ........................................008,029

Pioneer ..............................005,016,050

Portland ............................044,045,052

ProScan.............................................000

Quartz ...............................................002

Quasar ......................................008,053

RCA ...................000,005,007,008,028

....................................035,037,054,069

Radio Shack/Realistic....002,006,008,

.............009,012,015,019,027,043,053

Samsung............007,013,022,032,042

Sansui.........................................016,07 I

Sanyo .........................................002,012

Scott ..................004,013,041,049,068

Sears.................002,005,009,012,018,

....................................019,035,043,048

Sharp..................006,024,027,039,045

Shintom .....................017,026,031,055

Signature...........................................015

Sony ...................................017,026,038

Sylvania..............008,015,029,053,056

Symphonic ........................................015m

Tandy .........................................002,015

Tashiko ..............................................009

Tatung................................................030

Teac......................................05,030,069

Technics .............................................008

Teknika ......................008,009,015,02 I

Toshiba ..............005,013,019,048,049

Totevision .................................007,009

TMK ...................................................067

Unitech .............................................007

Vector Research..............014,016,044

Victor ................................................016

Video Concepts ..............014,016,044

Videosonic ........................................007

Wards ...............005,006,007,008,009,

.............012,013,015,025,027,031,035

Yamaha..............002,014,016,030,046

Zenith ........................011,017,026,072

Programming the Universal Remote to Control a ProScan,

RCA, or GE Brand DSS ®Receiver

The universal remote is preprogrammed to control a ProScan, RCA, or

GE brand DSS®receiver. Follow the instructions below for basic

operation of the receiver. You may want to experiment with other

buttons on the remote to see if they work with your receiver.

Programming the Universal Remote

to Control a Satellite Receiver

Pefer to the Connection Foldout or contact your satellite company to

hook up your satellite receiver. If you have a satellite box with its own

remote, you also may be able to use the TV's remote with your satellite

receiver. Use the codes in the code list on the right or on the sheet

packed with your remote. However, this remote may not operate all

models of the brands that are shown in the code list.

1. Turn on the satellite receiver.

2. Look up your brand and its code number(s) on the code list at

the right.

3. Pressand hold the SAT.CABLE button on the remote.

4. Enter the two-digit code from the code list.

5. Release SAT.CABLE, then press POWER to see if the satellite

receiver responds to the remote commands.

6. Repeat steps 3 through 5 using the next code listed for your brand

until the satellite receiver responds to the remote commands.

oll

Satellite Receiver Codes

Chaparral ..................................080,08 I

Cheyenne .........................................08 I

Drake .........................................082,083

General Instruments......092,093,094

Realistic.............................................084

Sierra I,I1,111.......................................08 I

STSI ...................................................085

STS2...................................................086

STS3....................................................087

STS4...................................................088

Toshiba ..............................................089

Uniden ...............................................090

Video Cipher II................................091

DSS®is a registered trademark of DirecTV Inc., a unit of GM Hughes Electronics Corporation

Programming the Universal Remote to Control a

Cable Box

Refer to the Connection Foldout or contact your cable company to

hook up your cable box. If you have a cable box with its own remote,

you also may be able to use the ]-V's remote with your cable box. This

remote can be programmed to control either a satellite receiver or a

cable box, not both. Use the codes in the code list on the right or on

the sheet packed with your remote. This remote may not operate all

models of the brands that are shown in the code list.

1. Turn on the cable box.

2. Look up your brand and its code number(s) on the code list at right.

3. Pressand hold the SAT*CABLE button on the remote.

4. Enter the two-digit code from the code list.

5. Release SAT*CABLE, then press POWER or CHAN ^ or CHAN v to

see if the cable box responds to the remote commands.

6. Repeat steps 3 through 5 using the next code listed for your brand

until the cable box responds to the remote commands.

Cable Box Codes

ABC .................................................022,046,053,054

Anvision .........................................................007,008

Cablestar .......................................................007,008

Diamond ................................................................056

Eagle.................................................................007,008

Eastern Int.. ............................................................002

General Instuments .............................................046

GI 400 .............004,005,015,_t23,024,025,030,036

Hamlin .....................................003,012,013,034,048

Hitachi .....................................................037,043,046

Jerrold ............004,005,015,023,024,025,030,036,

..................................................045,046,047,062,065

Macom ...........................................................037,043

Magnavox...............................007,008,019,021,026,

..........................................028,029,032,033,040,041

NSC .........................................................................009

Oak ..........................................................001,016,038

Oak Sigma .............................................................016

Panasonic........................................003,027,039,06 I

Philips .....................................007,008,019,021,026,

...........................................028,029,032,033,040,04 I

Pioneer .....................................................018,020,044

RCA .................................................................000,027

Randtek ..........................................................007,008

Regal........................................................003,012,013

Regency..........................................................002,033

Samsung.................................................................044

Sci.Atlanta ..............................003,022,035,063,064

Signature ................................................................046

Sprucer...................................................................027

Starcom ..................................................................046

Stargate 2000........................................................058

Sylvania...........................................................011,059

Teknika...................................................................006

Texscan ...................................................010,01 1,059

Tocom .....................................017,021,049,050,055

Unika .......................................................031,032,04 I

Universal ..................................................051,052,060

Viewstar..................................007,008,019,021,026,

...........................................028,029,032,033,040,04 I

WarnerAmex .......................................................044

Zenith ..............................................014,042,057,061

Programming the Universal Remote to Control a

Laserdisc Player, DVD Player, or Second VCR

-Ihe remote's DVDoVCR button is preprogrammed to control the

primary functions of a ProScan, RCA, or GE DVD player. If you would

like this button to control a component other than a DVD player, you

can program the remote to control a laserdisc player or VCR. For a

ProScan, RCA, or GE component, just use the codes shown to the right.

If you ever need to reprogram the remote to control a DVD player,

laserdisc player, or second VCR, use the codes shown to the right.

1. Turn on the laserdisc player, DVD player, or second VCR.

2. Look up your brand and its code number(s) on code list at right.

3. Pressand hold the DVD.VCR button on the remote.

.4.

Enter the two-digit code from the code list.

Release the DVDoVCR button and pressPOWER or another button

to see if the laserdisc player or DVD player responds to the remote

commands.

6. Repeat these steps using the next code listed for your brand, until

the laserdisc player, DVD player, or second VCR responds to the

remote commands.

rRCA, ProScan, or GE Codes 1

VCR ...............................................33,37

Laserdisc player ........................... 33,37

DVD player ........................................ 78

Programming the Universal Remote

to Control an Audio Component

To program the remote for a remote-controllable audio component,

point the remote at the component and press the correct component

button: AUX for an AV receiver, CD for a CD player, etc. Then, press

POWER or CHAN up or down. If the component doesn't respond, the

remote needs to be programmed. Use the codes in the code list on the

next page or on the sheet packed with your remote. However, this

remote may not operate all models of the brands that are shown in the

code list.

Follow these steps to program your universal remote to control your

audio component:

1. Turn on the component to be programmed.

2. Look up your brand and code number(s) on the code list.

3. Pressand hold the component button on the remote.

4. Enter the two-digit code from the code list.

5. Release component button, then press POWER to see if the

component responds to the remote commands. If it doesn't, try

pressing the component button, then POWER again.

6. Repeat steps 3 through 5 using the next code listed for your brand

until the component responds to the remote commands.

Audio Component Codes

ADS

AMP ..........................................00 I

AIWA

CD ..........................................060

AKA|

AMP ..................................002,008

DENON

CD ............................................057

DYNAMIC BASS

AM/FM .....................................029

CD ............................................025

TAPE.................................026,027

PHONO ..................................028

EMERSON

CD ..........................................066

FISHER

AMP ........................................023

CD ..........................................067

HITACHI

CD ............................................063

jqc

AMP ..................................016,058

AM/FM .............................030,035

CD ............................................032

TAPE.................................033,034

AUX .........................................03 I

KENWOOD

AMP ................................017,074

AM/FM .....................................074

CD ...........................067,070,077

TAPE.................................071,072

PHONO ..................................073

KYOCERA

AMP ..........................................009

LOTTE (NEC)

CD ............................................075

MAG NAVOX

AM P..........................................065

AM/FM ...................................065

CO ..........................................06 I

MARANTZ

AMP ..................................022,076

AM/FM .....................................076

CD ..........................................068

MITSUBISHI

AMP ..................................015,059

AM/FM .....................................059

NAKAMICHI

AMP ..........................................020

ONKYO

AM/FM .....................................082

CD ..........................................078

TAPE.................................080,08 I

PHONO ..................................079

PANASONIC

AMP ..........................................012

AM/FM .....................................038

CD ....................................036,083

TAPE.........................................037

PHILLIPS

AMP ..........................................062

AM/FM .....................................062

CD ..........................................061

PIONEER

AMP ..........................................014

AH/FM .....................................042

CO ............................................039

TAPE.................................040,04 I

RCA

AMP ..........................................024

AM/FM ...................................003

CD ............................007,043,044

TAPE.......................................006

PHONO ..................................005

AUX .................................004,054

REALISTIC

CD ..................................063,066

SANSUI

CD ............................................045

SCOTT

CD ............................................066

TAPE.................................055,056

SHERWOOD

AMP ..................................011.013

SONY

AMP ..........................................02 I

AM/FM .....................................049

CD ............................................046

TAPE.................................048,053

PHONO ..................................047

•TEAC

AMP ..........................................010

CD ............................................069

"TECHNICS

AH/FM .....................................052

." CD ............................................050

TAPE.........................................05 I

._ yAMAHA

AMP ..................................018,019

PROGRAMMING THE SIMPLE REMOTE

-[here are two methods to program the simple remote's VCR button:

CODE SEARCH and DIRECT ENTRY. The simple remote's TV button is

already programmed for your TV.

To program the VCR button using CODE SEARCH

1. Make sure the VCR is turned off unless it is a PROSCAN, RCA, or

GE product. If the VCR is a PROSCAN, GE, or RCA product, turn

it on.

2. Pressthe VCR button and the POWER button simultaneously.

3. Releasethe two buttons.

4. Pressthe POWER button repeatedly until the VCR turns ON.

5. Pressthe CHAN v button to verify the VCR operates correctly.

PressMENU to complete the process.

To program the VCR button using DIRECT ENTRY

1. Find the keypress combination for your VCR by locating your brand

of VCR in the VCR Codes table on the next page.

2. Note the code numbers that follow your brand of VCR.

3. Locate the code number in the Key Combination chart on

the next page.

4. Pressand hold the VCR button.

5. Enter the four keypresses shown in the Key Combination Chart.

Symbol

Simple Remote Button

CHAN UP

CHAN DOWN

VOL UP

VOL DOWN

ii i

Simple RemoteVCR Codes

Admiral ...........................................06

Aiwa .................................................15

Akai .......................03,17,22,23,63,66

Audio Dynamics.......................14,16

Bell&Howell ...................................02

Broksonic ..........................................0

Candle ............07,09,13,44,45,46,52

Cannon ......................................08,53

Capehart .........................................0 I

Citizen ............07,09,13,44,45,46,52

Colortyme ......................................14

Craig ...........................................07,12

Curtis Mathes ....................00,07,08,

.........................14,15,44,46,53,64,67

Daewoo ...............................13,45,52

dbx ..............................................14,16

Dimensia .........................................00

Dynatech ........................................15

Electrohome ..................................27

Emerson...................08,09, I 0,13,15,

.........................20,23,27,34,41,42,47,

..........................49,57,62,65,67,68,70

Fisher...................................02,12,18,

...........................................19,43,48,58

Funai ................................................I5

GI" .........................00,07,08,32,37,53

Goldstar ..........................09,14,46,60

Harman Kardon ............................14

Hitachi .............................05,15,35,36

Instant Replay ................................08

JCL...................................................08

JC Penney ......................02,05,07,08,

...............................14,16,30,35,51,53

JVC .............................02,14,16,30,46

Kenwood .............02,14,16,30,44,46

Lloyd's..............................................15

Logik ................................................3 I

Magnavox ........................08,29,53,56

Marantz ....................02,08,14,16,29,

..........................................30,44,46,6 I

Marta ...............................................09

MEI ................................................... 08

Memorex ........................ 08,09,12,15

MGA ........................................... 04,27

Midland ............................................ 32

Minolta ....................................... 05,35

Mitsubishi ..................04,05,27,35,40

Montgomery Ward .......................06

MTC ...........................................07,15

Multitech .........................07,15,31,32

NEC .....02,14,16,30,44,46,59,61,64

Panasonic ...................................08,53

Pentax...................................05,35,44

Pentex Research + .......................46

Philco ...............................08,29,53,56

Philips .........................................08,29

Pioneer ...... 05,16,33 (laser disc),50

Portland ...............................44,45,52

ProScan ...........................................00

Quartz .............................................02

Quasar ........................................08,53

RCA .....00,05,07,08,28,35,37,54,69

Radio Shack/Realistic.......02,06,08,

.........................09,12,15,19,27,43,53

Samsung ....................07,13,22,32,42

Sansui.........................................._6,7 I

Sanyo ..........................................02,12

Scott ..........................04,13,41,49,68

Sears .........................02,05,09,12,18,

..........................................19,35,43,48

Sharp ..........................06,24,27,39,45

Shintom ...........................17,26,31,5S

Signature .........................................15

Sony ......................................17,26,38

Sylvania ......................08,15,29,53,56

Symphonic ......................................15

Tandy ..........................................02,15

Tashiko ............................................09

Tatung ..............................................30

Teac.......................................15,30,69

Technics ..........................................08

Teknika ............................08,09,15,2 I

Toshiba ......................05,13,19,48,49

Totevision ..................................07,09

TMK .................................................67

Unitech ............................................07

Vector Research ................. 14,16,44

Victor ..............................................16

Video Concepts ................. 14,16,44

Videosonic ......................................07

Wards .......................05,06,07,08,09,

.........................12,13,15,25,27,31,35

Yamaha ......................02,14,16,30,46

_m Key Combinations

00 ^^^^ 51 ^<^<

01 ^^^> 52 ^<>^

02 ^^^v 53 ^<>>

03 ^^^< 54 ^<>v

04 ^^>^ 55 ^<><

05 ^^>> 56 ^<v ^

06 ^^>v 57 ^<v>

07 ^^>< 58 ^<vv

08 ^^v ^ 59 ^<v<

09 ^^v> 60 ^<<^

10 ^^vv 61 ^<<>

II ^^v< 62 ^<<v

12 ^^<^ 63 ^<<<

13 ^^<> 64 _'^^^

14 ^^<v 65 >^^>

15 ^^<< 66 >^^v

16 ^>^^ 67 >^^<

17 ^>^> 68 >^>^

18 ^>^v 69 >^>>

19 ^>^< 70 >^>v

20 ^>>^ 7L >^><

21 ^>>> 72 >^v ^

22 ^>>v 73 >^v>

23 ^>>< 74 >^vv

24 ^>v ^ 75 >^v<

25 ^>v> 76 >^<^

26 ^>vv 77 >^<>

27 ^>v< 78 >^<v

28 ^><^ 79 >^<<

29 ^><> 80 >>^^

30 ^><v 81 >>^>

31 ^><< 82 >>^v

32 ^v ^^ 83 >>^<

33 ^v ^> 84 >>>^

34 ^v^v 85 >>>>

35 ^v ^< 86 >>>v

36 ^v> ^ 87 >>><

37 ^v>> 88 >>v ^

38 ^v>v 89 >>v>

39 ^v>< 90 >>vv

40 ^vv ^ 91 >>v<

41 ^vv> 92 >><^

42 ^vvv 93 >><>

43 ^vv< 94 >><v

44 ^v< ^ 95 >><<

45 ^v<> 96 >v ^^

46 ^v<v 97 >v^>

47 ^v<< 98 >v^v

48 ^<^^ 99 >v^<

49 ^<^> 100 >v> ^

50 ^<^v

Using the Remote to Control a Component

Once the remote has been programmed with the correct codes, you're

ready to use it to control your component.

To operate the component using the remote:

1. Pressthe component button (lW, VCR, DVDoVCR, SAToCABLE,

AUDIO, etc.) to set the remote to control that component.

:2. Press POWER to turn the device off or on.

3. Use the remote buttons that apply to that device (CHAN buttons,

transport keys, etc.).

Tip for the Simple Remote:

To change channels on theVCR, press

and holdVCR, then pressTV. Release

both and use the CHAN buttons to

change channels. To return to using

the simple remote buttons as trans-

port keys, press VCR.

For PROSCAN, RCA, and GE devices,

pressing the device button should

turn the device on. Use the POWER

button to turn the device off.

A PICTURE BOOK TOUR

This section gives apictorial overview of the

television.The parts detailed are:

• The Remote Control

•The Simple Remote

•The Channel Marker

•The Back Panel

•The Front Panel

REMOTE CONTROL BUTTONS

POWER When in TV mode, turns off the TV. In VCR mode, and if

programmed, turns on and off some VCRs.

VCR1 If programmed, turns on VCR and puts the remote in VCR

mode. Also, turns on the TV.

SAT.CABLE Turns on the satellite receiver or, if programmed, some

cable boxes. Puts the remote in satellite or cable mode. Also, turns on

the TV.

DVD.VCR If programmed may turn on a DVD player, second VCR,

or laserdiscplayer. Puts the remote in DVDeVCR mode. Also turns on

the TV.

TV Turns on the TV and puts the remote in TV mode. Also, displays

channel information.

CD If programmed, turns on the compact disc player and puts the

remote in CD mode.

AM-FM If programmed, turns on the AM/FM receiver and puts the

remote in AMeFM mode.

TAPE If programmed, turns on the tape player and puts the remote in

Tape mode.

AUX If programmed, turns on the auxiliary audio component and puts

the remote in that mode.

REW, PLAY, FF, REC, STOP, PAUSE If programmed, provide transport

control for some remote-controllable VCRs, laserdisc players, tape

decks, and CD players.

VOL <or VOL > Decreases or increases the TV's volume.

CHAN A or CHAN vScans up or down through the current channel

list. Press once to change the channel up or down. Press and hold to

continue changing channels.

INFO Brings up channel information. Press repeatedly to see detailed

program information, if available.

SKIP Press once before changing channels, and the TV waits 30

seconds before returning you to the original channel. Press repeatedly

to add more time.

MUTE Turns off the TV's sound. Press again to restore the sound.

GO BACK Returns to the previous channel.

(0-9) Number Buttons Enterschannel numbers and time settings

directly from the remote control. To enter a two-digit channel, press

the two digits. To enter a three-digit channel, press and hold the "1"

digit, then add the second two. For example, to tune to channel 123,

press and hold 1. Then, press 2and press 3.

vCR SAT'CABLE

DVD'VCR CO

AM'FM TAPE AUX

@ ©

REVERSE PLAY FORWARD

STOP PAUSERECORD

CH GUIDE SKIP

\",./

MUTE GOBACK

FAV'INPUT ANTENNA

INFO

SELECT

PIP

SIZE

CLEAR RESET SCAN

(_ FETCH

POP SPLIT CH CTRL

SWAP FREEZE

For more, see Programmingthe Universal1

LRemote, p. 22. J

FAV,INPUT In TV Mode, press to toggle through the available input

sources (VIDI, VID2, previous channel). In SAT mode, press to select

channel lists.

ANTENNA When in TV mode, changes the antenna input. Functions

as TV-.VCR button in VCR mode and TV-SAT button in SAT.CABLE

Mode.

CLEAR Removes any menu or display from the screen and returns to

TV viewing.

MENUoSELECT Brings up the Main Menu. When in the menu system,

selects highlighted items. When on an Exit button, returns to the

previous menu. When in VCR mode, functions as a Program button.

RESET Returns all picture quality controls to their original settings.

MOVE (Arrows) Used to point to different items in the menu system.

Also usedto adjust the menu controls and to move the PIP window

when no menus are on the screen.

PIP Brings up the small picture-in-picture window. Pressagain to

remove the PIP window.

SPLIT Divides the main picture into left and a right pictures. Press

again to remove the split screen.

POP Brings up three small picture-outside-picture windows. Press

again to remove the POP windows.

CH GUIDE Brings up twelve small pictures that are previews of the

next twelve channels in the channel list. Use the up and down arrows

1:oseethe next or previous four channels. PressMENU to go to the

channel you have highlighted. PressGUIDE again to remove the

channel guide.

CH CTRL Selects whether the main picture or a PIX+ window is

affected by the CHAN and FREEZEbuttons.

SWAP Swaps the main picture with the currently selected

PIX+ window.

FREEZE Freezes the video in the main picture or the PIP window (if it

is displayed).

SIZE Selectsthe size of the PIPwindow.

SCAN Briefly displays each channel from the current channel list.

Press again to stop scan.

THE LIGHTBULB (O) Illuminates the remote buttons. After a few

seconds the light automatically shuts itself off.

FETCH Contains up to five frequently used controls from other menus.

You can choose what controls are available at the fetch menu.

Ihe POP windows display only an- 1

tenna or cableTV signals. Signals from

the video inputs are not displayed in

POP windows.

Io add your own favorite control to ]

the Fetch Menu, see Using and Modi- Jfiling Fetch, p. 58.

SIMPLE REMOTE BUTTONS

VOL <Decreases the volume. When in the menu system, VOL < is

used to point to items and adjust menu controls. In VCR mode, it

functions as a REW or reverse search button.

VOL > Increases the volume. When in the menu system, VOL > is

used to point to items and adjust menu controls. In VCR mode, it

functions as a FFor fast search button.

CHAN AScans up through the channel list. In the menu system, it

points to items and adjusts menu controls. In VCR mode, it functions

as a PLAY button.

CHAN v Scans down through the current channel list. In the menu

system, it points to items and adjusts menu controls. In VCR mode, it

functions as a STOP button.

MENU Brings up the Main Menu. When in the menu system, it selects

highlighted items. Also returns to the previous menu. When in VCR

mode, it functions as a PAUSE button.

"IV Turns on the TV and puts the remote in TV mode. Also displays

channel information.

VCR If programmed, turns on the VCR and puts remote in VCR mode.

Also turns on the TV.

POWER Turns off the TV. Also turns some VCRs off and on.

For more, see Programming the Simple

Remote, p. 28.

To change channels on theVCR, press

and hold VCR, then pressTV. Release

both buttons and use the CHAN

buttons to change channels.

To return to using the remote buttons

as transport keys, pressVCR.

CHANNEL MARKER

There are several indicators that come up when you change

channels, press the DISPLAYbutton, or press the TV button. This

display is called the Channel Marker.

9 DispLaysthe current channel.

PIP 2 Displays the current PIP channel, if in use.

CNN If assigned using the Lists and Labels control panel, displays

the channel logo for the current channel.

ANT A Displays the current input source.

CC Displayed when Closed Captioning is available on the

current channel.

Stereo Displayed when the current channel is broadcasting in Stereo.

SAP Displayed when the current channel is broadcasting SAP

(Second Audio Program) information.

Sleep Displayed when the Sleep Timer has been set.

NORM Displays the current channel list, NORM or FAV.

Ihe channel marker shown above is 1

just an example, of course.

BACK PANEL

INPUT 1

Lets you connect a video component such as a VCR, DSS receiver, or

laserdisc player.

I./MONO Provides left audio connection. Or, if you are connecting a

mono component, use the I_/MONO input. The left audio connector is

usually white.

RIGHT Provides right audio connection. The right audio connector is

usually red.

VIDEO Provides video connection. The video connector is

usually yellow.

S-VIDEO Lets you connect a component with S-Video capability,

such as a satellite receiver or S-Video VCR. When using S-Video, make

sure to connect the three audio/video cables, as well as the S-Video

connector.

INPUT 2

Provides connection to a second video component such as a VCR,

satellite receiver, or laserdisc player. Its jacks are the same as

described for INPUT 1, above.

INPUT 3

Provides connection to a third video component such as a VCR or

laserdisc player.

L/MONO Provides left audio connection. Or, if you are connecting a

mono component, use the L/MONO input. The left audio connector is

usually white.

RIGHT Provides right audio connection. The right audio connector is

usually red.

VIDEO Provides video connection. The video connector is usually

yellow.

You can use the ANT B input for

video games and switch between the

two inputs using the ANTENNA

button on the remote.

When usingTV games, computers

and similar products with yourTV,

keep the contrast at a low setting. If

a fixed (non-moving) pattern is left

on the screen for long periods of

time at ahigh contrast setting, the

image can be permanently

imprinted onto the picture tubes.

These types of imprints are not

covered by your warranty because

they are the result of misuse.

SIGNAL SOURCE Provides connection to a home antenna or cable

TV system.

OUTPUT BRIDGED FROM INPUT 1 Provides fixed-volume audio

and video from the INPUT 1 source only.

FIXED OUTPUT Provides fixed-level audio and video output from the

TV. These output signals are ideal for connecting to an A/V receiver or

amplifier that has its own remote control.

TV TUNER OUTPUT Provides audio and video output from the TV

tuner. The TV TUNER OUTPUT jacks are ideal for connecting the TV

to an AV receiver with video display, then routing the audio video

jacks back into the TV's audio/video inputs.

VOLUME-CONTROLLED PROLOGIC OUTPUTS These five jacks

provide connections to an AV receiver or power amplifier.

PIP OUTPUT Provides audio output from the PIX+ window.

CENTER (switch) Lets you choose between playing center channel

audio through the TV's internal speaker, or through an external center

channel speaker connected to the TV.

CENTER CHANNEL SPEAKERS Lets you connect external center

channel speakers to the TV.

MAIN (switch) The internal main speaker switch lets you turn off the

TV's internal main speakers and play the main audio through external

speakers connected to the TV.

MAIN SPEAKERS Lets you connect external left and right speakers to

the TV.

SURROUND OUTPUT (SURR OUTPUT) SPEAKERS Lets you connect

left and right surround channel speakers to the TV.

PICTURE TILT Because this TV has an extra-large color picture tube,

you may need to reset the POLARITY switch and STRENGTH switches

if you reposition the TV or move it to a different room. To do so:

1. Make sure the STRENGTH switch is set to OFF.

2. Move the STRENGTH switch to LOW. If the picture gets better, but

not quite perfect, move the switch to HIGH.

3. If the picture gets worse, change the position of the POLARITY

switch. If the picture improves, but is not quite perfect, move the

STRENGTH switch to HIGH.

VIOEO UMONO RIGHT VIDEO CENTER $URR

VIDEO UMOflO RIGHT VOLUME-

PROLOGIC

VIDEO UMONO RIGHT LEFT OUTPUTS I_NT

•_TA _B LEFT I_

ICem'ER

n_,_

I,.-,-I

SURR

OUTP_

lelelolol

n n I I I

--center channel

--main

_surround

+ LEFT - - RIGHT +

I°

P_TURE TILT

FRONT PANEL

VOL < Decreases the volume. When in the menu system, use VOL <

to point left to items and adjust menu controls.

VOL > Increases the volume. When in the menu system, use VOL > to

point right to items and adjust menu controls.

CHAN ^ Scans up through the channel list. In the menu system, use it

1:opoint up to items and adjust menu controls.

CHAN vScans down through the current channel list. In the menu

system, use it to point down to items and adjusts menu controls.

MENU Brings up the Main Menu. In the menu system, use it to select

ihighlighted items and return to the previous menu.

POWER Turns the TV on and off.

(Headphone) Plug stereo headphones into this jack.

A.V (Audio/Video)ack) Use the AV adapter, included with your

TV accessories, to connect a camcorder or other device to the front of

the TV.

The front panel above shows a typical

button layout. The exact look of the

buttons may be different from those

on the front of yourTV.

If you turn Parental Control on, the

front panel no longer provides access

to the menus. For more information,

see Parental Control, page 45.

A SHORT GUIDE TO THE

MENU SYSTEM

This section provides a brief explanation of all

the menu commands on a menu-by-menu basis.

• ,Audio Contains the controls that let you adjust

•the way the TV sounds.

•Picture Quality Contains the controls that let

'you adjust the picture.

•'Screen Contains the controls that let you adjust

•the Closed-Caption mode and display.

•'Time Contains the controls that let you set the

•time and schedule theTV to turn off and on at

:specifictimes.

• ,Channel Contains all the commands used to

,control your channels, including custom-building

',your channel list, setting parental controls, and

:_ettingup yourTV to control the components

connected to theTV.

,Assistance Contains the on-line guidesthat will

Ihelpyou set up yourTV and add other components

•to your system.

AUDIO MENU

Mute Lets you turn the TV's sound off or on.

Equalizer Takes you to slider bars that adjust the tone of each of the

TV's external and internal speakers.

Speakers Lets you turn on or off the TV's internal or external front or

rear speakers.

Audio Processor

Lets you choose among the available audio modes, which control the

'way sound comes through your speakers.

Mono Plays the sound in mono only. This is a good choice when

receiving broadcasts where distance makes the stereo signal weak.

Stereo Splits the incoming stereo audio signal into left and right

channels. Most TV programs and recorded materials have stereo

audio. The TV displays the word STEREOwhen you tune to a program

that is broadcast in stereo.

Dolby* 3 Stereo Splits the incoming audio signal into left and right

and center channels.

Pro Logic Splits the incoming audio signal into left, right, center, and

rear channels. You must connect rear speakers to hear the rear

(surround) channel information.

Matrix Surround Splits the incoming audio signal into left, right, and

rear channels. You must connect rear speakers to hear the rear

(surround) channel information. This is a good choice when you're

listening to monophonic audio, such as speeches, sporting events or

plain dialog.

Hall Surround Splits the incoming audio signal into left, right, and

rear channels. You must connect rear speakers to hear the rear

(surround) channel information. This is a good choice for movies,

music, etc.

Mute

iIrl

SoundOn

*Dolby is atrademark of Dolby Laboratories Licensing Corp. IFor more on the menus, see Using the |

Menu System, page 7.

"l_veakTakes you to a control panel that lets you make appropriate

fine adjustments to your TV's sound. The changes you can make

depend on the speaker configuration and the audio processor you chose.

Sound Check Lets you feed white noise through each of your speakers

in turn, two seconds at a time to better adjust the balance among

your speakers.

Volume Limit Lets you adjust the TV's maximum volume limit.

Headphone Volume Lets you set the volume of the sound played

through headphones connected to the jack on the front of the TV.

Headphone Audio Lets you set whether the headphones play the

audio from the main TV picture or the PIX+ window.

PICTURE QUALITY MENU

Contrast Adjusts the difference between the light and dark areas of

the picture.

Color Adjusts the richness of the color.

Tint Adjusts the balance between the red and green levels.

Black Level Adjusts the brightness of the picture.

Sharpness Adjusts the crispness of edges in the picture.

Auto Color Lets you turn on the feature that automatically corrects the

color of the picture. This is especially useful for tracking realistic flesh

tone colors as you switch from channel to channel. Select Off if you

prefer to adjust the picture with the Picture Controls.

Video Noise Filter Lets you reduce noise, or 'snow,' in the picture.

Color Warmth Lets you set one of three automatic color adjustments:

Cool (for a more blue palette of picture colors), Normal (for standard

picture colors), and Warm (for a more red palette of picture colors).

Theatre Automatically setsthe picture quality controls for optimal view-

ing in a darkened, theatre-like setting, for example, a darkened room.

Reset Picture Controls Lets you reset the picture controls to their

original settings.

ITurn the Auto Color feature OFF if |

you prefer to manually adjust the

picture with the picture controls.

SCREEN MENU

PIX+

]Lets you set the PIX+ mode.

Single Screen The usual appearance of the TV.

PIP (Picture-in-Pidure) A second, smaller picture appears in the

corner of the screen.

'.Split Screen The screen is divided into two pictures, one on the left

and one on the right.

POP (Picture-outside-Picture) Three secondary pictures appear on the

fight side of the screen.

,Channel Guide Twelve small pictures appear on the screen.

Options

Lets you control the appearance of the current PIX+ mode.

:Single Picture & Channel Guide Lets you choose whether the CHAN

buttons provide access to your Normal or Favorite channel list. •

PIP (Picture-in-Picture) Lets you control whether the main picture or

the PIP window is affected by the CHAN buttons and at what size the

PIP window is displayed.

Channel List Lets you choose between the normal and favorite

,channels (NORM and FAV) lists you set up in Lists and Labels.

Split Screen Lets you control which picture is affected by the CHAN

]buttons, and whether the Normal or Favorite channel list is available.

,An action button lets you swap the left and right pictures.

POP (Picture-outside-Picture) Lets you control which picture is

.affected by the CHAN buttons.

PIX+

ommmm

Screen

Closed Captioning Display

Lets you choose the way closed captioning information is shown on

the screen.

Off No captioning information displayed.

On Always Captioning information is displayed, when available.

,On When Sound is Muted Captioning information is displayed, if

available, when the TV's sound is muted. The captioning information

is not displayed when the sound is on.

Closed Caption Mode Lets you choose acaptioning mode for

displaying captioning information.

I Captioning information is not avail- 1

able on all channels at all times. For

more on using closed captioning, see

Advanced Features, page 5 I.

TIME MENU

SleepTimer Lets you select how long the -IV waits before it turns off.

Schedule Leads to a control panel that lets you set up a schedule for

turning the TV on and off automatically. The on-screen directions

guide you through the steps needed to set the schedule.

Set Time and Day Leads to a control panel that lets you enter the

current time and current day of the week. The on-screen directions

guide you through the steps needed to set the time and day.

Time Display Lets you choose how the TV's clock is displayed. The

clock can appear continuously in the upper right corner of the main

picture; it can appear every 60, 30, or 15 minutes for four seconds; or

it can be off entirely.

SetTimeendDay

CHANNEL MENU

Parental Control

Lets you turn the Parental Control feature off or on. You indicate which

channels are Parent Approved in the Lists and Labels control panel,

explained below.

On The front panel CHAN buttons will tune only to channels that you

have marked as "Parent Approved" in the Lists and Labels control panel

(,_eebelow). Important: When Parental Control is on, the TV's front

panel no longer provides access to the menus. Parents may prefer to

hide the remote and let children use the front panel to change channels.

Off The TV shows all channels, whether they are marked as "Parent

Approved" or not. Front panel access to menus is available when

Parental Control is set to Off.

Signal Source Lets you indicate whether you are currently using a

signal plugged into the Antenna A or Antenna Bjacks on the back of

the TV. Usually, the antenna or cable is connected to Antenna A.

Signal Type

Lets you select which type of TV signal you are currently using.

UHF/VHF Antenna Choose if you are currently usingan antenna for

TV signals.

(:able Choose if you are currently usingcable or a cable box for

TV signals.

I.ists and Labels

Leads to a control panel that lets you choose whether to include each

channel in various lists: a list of normally available channels, a list of

favorite channels, a list of parent approved channels, and a list of

channels that will be accompanied by dialog in a second language,

if available. Also lets you assign easily remembered labels to the

channel numbers.

CHAN Use the MOVE arrows to move up and down through the

channel scan list.

ParentaLControl

lib

Connect your video game to Antenna

B. Then, when you want to play video

games, press ANTENNA on the

remote to change the Signal Source to

Antenna B.

You may prefer to include only a dozen

or so of your favorite channels in the

Normal list, and use the number

buttons on the big remote to access

the rest of the channels as desired.

NORM All the channels that have Normal checked make up the

Normal list. These channels can be viewed by scanning with the

CHAN buttons, if the Normal viewing list is selected in the Options

control panel in the Screen menu. In Normal viewing, channels that

are not part of the list can be viewed by using the number buttons on

the remote. Use the MENU button to check or uncheck the Normal

box for a channel.

FAV All the channels that have Favorite checked make up the Favorite

list. You can place 10 channels in the FAV list.

Parent Approved Use the MENU button to check or uncheck the

Parental Control box for a channel. A check indicates that the channel

can be shown at any time, regardless of whether Parental Control is

turned on. No check indicates that the front panel cannot tune to that

channel when Parental Control is turned on. Important: You must

turn the Parental Control feature to On.

SAP (Second Audio Program) When this is chosen for a channel, the

channel's dialog is in asecond language, if asecond-language audio

signal is available. The TV displays the word SAP when you tune to a

program that is broadcast with SAP information. SAP audio is

broadcast in mono.

Labels Use the MOVE arrows to enter a graphic logo or six-character

custom text label for each channel. Hold the button down to scroll

quickly through the characters-there are a lot of them. Press RESET to

clear a label. The TV can store at least 24 labels in memory. You may

wish to use the graphic Iogos for most channels and create custom text

labels for special channels.

Channel Display Lets you choose whether the channel number is

displayed in the upper right corner of the main picture.

Auto Channel Search Tells the TV to search automatically for all the

channels available through the antenna input(s). When the TV finds an

active channel, it places it in the Normal channel list. Inactive

channels-weak stations or channels with no signal at all-are removed

from the channel list. Video 1 is automatically assigned to the Normal

channel list. If the VIDEO 2 and VIDEO 3 inputs were assigned to a

device, they are added to the Normal channel list also.

AUTO TUNING

Leads to a menu that lets you set up the TV to automatically tune to

the correct input channel when you press VCRI, DVD°VCR, or

SAT-CABLE.

Set VCR 1 Channel

Lets you select the channel that the TV tunes to when you press the

VCRI button. The choices are:

Not Connected Choose this if you do not have a VCR connected to an

antenna or Video input on the back of the TV, or if you don't want the

TV to tune to a channel when the VCRI button is pressed.

Channel 3 Antenna A Choose this if your VCR is connected to the

Antenna A jack on the back of the TV, and you want the TV to tune to

channel 3 when you press the VCR1 button. Reminder: Make sure the

component's Ch 3/4 switch is set to channel 3.

Channel 4Antenna A Choose this if your VCR is connected to the

Antenna A jack on the back of the TV, and you want the TV to tune to

channel 4 when you press the VCR1 button. Reminder: Make sure the

component's Ch 3/4 switch is set to channel 4.

Channel 3 Antenna B Choose this if your VCR is connected to the

Antenna Bjack on the back of the TV, and you want the TV to tune to

channel 3 when you press the VCR1 button. Reminder: Make sure the

component's Ch 3/4 switch is set to channel 3.

Channel 4Antenna B Choose this if your VCR is connected to the

Antenna Bjack on the back of the TV, and you want the TV to tune to

channel 4 when you press the VCR1 button. Reminder: Make sure the

component's Ch 3/4 switch is set to channel 4.

Video 1 Input Choose this if your VCR is connected to the Video 1

jacks on the back of the TV, and you want the TV to tune to Video I

input when you press the VCR] button.

Video 2Input Choose this if your VCR is connected to the Video 2

jacks on the back of the TV, and you want the TV to tune to Video 2

input when you press the VCR1 button.

Video 3 Input Choose this if your VCR is connected to the Video 3

jacks on the back of the TV, and you want the TV to tune to Video 3

input when you press the VCRi button. [

ParentalControl

rllg

AutoTuning is part of the interactive

setup routine. For more, see Interac-

tive Setup, page 17. J

Set DVD*VCR Channel

Lets you select the channel that the TV tunes to when you press the

DVD-VCR button. The choices are the same as those listed under Set

VCR I Channel, except that the component is the second VCR or

laserdisc player, and the remote button being programmed is

DVD;VCR. For example:

Video 2 Input Choose this if your second VCR or laserdisc player is

connected to the Video 2 jacks on the back of the TV and you want

the TV to tune to Video 2 input when you press the DVD-VCR button.

This is a typical setting for a second VCR or laserdisc player.

PorentolControl

Eli

Set SAT-CABLE Channel

Lets you select the channel that the TV tunes to when you press the

SAT-CABLE button. Usually, SAT-CABLE can control either a satellite

receiver connected to the Video 1 input jacks or a cable box

connected to the Antenna A jack.

The choices are the same as those listed under Set VCR 1 Channel,

and include Channel 2 Antenna A and Channel 2 Antenna B. Also, the

component is either a satellite receiver or a cable box, and the button

being programmed is SAT.CABLE. For example:

Video 1 Input Choose this if your satellite receiver is connected to the

Video 1jacks on the back of the TV and you want the TV to tune to

Video 1 input when you press the SAT-CABLE button. This is the

typical setting for a satellite.

The following is an example for a cable box:

Ch 3 Antenna A Choose this if your cable box is connected to the

Antenna A jack on the back of the TV and you want the TV to tune to

channel 3 when you press the SAT,CABLE button. This is a typical

setting for a cable box.

,ASSISTANCE

Setup The Setup routine is part of the Assistance menu and is

described in Interactive Setup.

Connections Helps you connect different components to the TV. The

Connections routine is also part of the setup routine. When you are

using the Connections routine, be sure and follow along in the

Connections Foldout.

Preferences

]Letsyou set your preferences for things such as the appearance of the

on-screen menus.

Menu Display Lets you change the appearance of the Main Menu.

.Choose the Living Room Main Menu (Pictorial) or choose a main

menu that looks more like the other on-screen menus (Textual).

Display Size Lets you choose extended or reduced graphics for the

on-screen displays. Reduced graphics eliminates the context-sensitive

help bar which appears at the bottom of the screen, the mute indicator

'which appears on screen when mute is active, the volume indicator

.and many other graphics.

Display Colors Lets you choose what eye-pleasing palette of colors

'will be used for the on-screen menus. Choose from Cornflower,

Sandstone, Seafoam or Charcoal.

,Clock Style Lets you change the appearance of the clock that hangs

on the wall in the main menu living room. Choose an analog or

digital clock.

About Your TV

Gives on-line information about using your TV and about your

remote controls.

Guided Tour Provides an automatic tour through the TV's features and

menu system. Follow the on-screen directions to step through the

different sections, or sit back and enjoy the show.

Remote Control Shows the remote control you are currently using-the

universal or the simple remote-and explains the function of each of

the buttons as you point to them.

This sections details how to use four of the'l'V's

important features:

• Operating PIX+

•Using Closed Captioning

•Displaying On-Screen Program Details

• Choosing an Audio Processor

• Using Fetch

• Displaying On-Screen Help

PIX+ OPERATION

There are four different PIX + modes: PIP (picture-in-picture), Split

Screen, POP (picture-outside-picture) and Channel Guide. You can

access all of these modes through the Screen menu.

PIP Mocle (picture-in-picture) Displays a second, smaller picture on

top of the main picture.

Split Screen Mode Divides the main picture into a left and a

Iright picture.

POP Mode (picture-outside-picture) Displays three small pictures to

the rightof the main picture.

Channel Guide Replaces the large picture with 12 small pictures.

PIX + with remote control buttons

The following remote control buttons affect the PIX+ modes:

PIP Brings up the PIP window. Press PIP again to remove the window.

SPLIT Brings up the Split Screen. PressSPLIT again to remove the

Split Screen.

POP Brings up the POP windows. PressPOP again to remove the

windows.

Guide Brings up 12 windows. PressGuide again to remove

the windows.

CH CTRL (Channel Control) Selects whether the main picture or a

PIX+ window is affected by the CHAN buttons. For instance, pressPIP

to bring up the PIP window, then press CH CTRL. Now, when you

press the CHAN buttons, the channels will change in the PIP window,

not the main picture.

In PIP and Split Screen modes, CH CTRL switchesbetween the main

picture and the PIX+ window. In POP mode, CH CTRL switchesfrom

main picture to top window to middle window to bottom window and

back to main.

FREEZE Freezes the video in the main picture or PIP window, if it is

displayed. To change which window is currently selected,

use CH CTRL.

SWAP In PIPor Split Screen mode, switches, or "swaps"' the video

display from the PIX + window to the main picture.

SIZE In PIP mode, selects the size of the PIPwindow. Choose from

five sizes.

52:

POP SPLIT CHCTRL

SWAP FREEZE

You can scan through channels in the

PIP window.When you find a channel

you like, press SWAP to display that

channel in the main picture, sending

the current channel to the PIP window.

SCAN Pressing SCAN causes the TV to automatically scan through

your channel list, using the currently selected window. To change the

currently selected window, use CH CTRL. Each channel is displayed

for four seconds before the TV automatically tunes to the next channel

in the list. In channel guide mode, you can highlight one of the 12

windows and press Scan to freeze the other 11 windows and run the

selected window.

Move Buttons In PIP mode, you can use the move buttons to push

the PIP window to different positions on the screen.

TWO TiPS FOR USING PIX + BUTTONS

Automatic Channel Surfing during commercials in the

Main Picture

You can auto-surf through the channels during commercials using the

SKIP and SCAN buttons.

1. PressSKIP to set the commercial skip timer. The PIP

window appears.

2. Then, press SCAN to auto-surf the main picture through the channel

list. When the SKIP feature times out, the original channel will

return automatically to the main picture and the PIP

window disappears.

Automatic Channel Surfing in the PIP Window

You can use the PIP window to auto-surf through channels as well.

I. Press PIP to bring up the PIP window.

2. Press CH CTRL to move the channel control to the PIPwindow.

3. PressSCAN. The TV begins displaying each channel in the PIP

window. If you see a channel that interests you, press SWAP.

CLOSED CAPTIONING

Many programs are encoded with closed captioning information,

which lets you display the audio portion of a program as text on the

TV screen. You can tell the TV to display closed captioning: a} never,

b) whenever it is available, or c) whenever the audio is muted.

TO DISPLAY CLOSED CAPTIONING

1. PressMENU to bring up the Main Menu.

2. Point to Screen and press MENU. The Screen Menu appears with

PIX+ highlighted.

3. Point to Closed Cap Disp.

4. Pressthe MOVE arrows to select a closed captioning display:

Off No closed captioning information is displayed.

On always Closed captioning is displayed whenever it is available.

On when muted Closed captioning is displayed only when you

have muted the sound.

5. Point to Exit and press MENU to return to the Main menu.

CLOSED CAPTIONING MODES

"rheTV offerseight closed-captioned modes, including four

1Lextmodes.

To Set the Closed Captioning Mode

I. Select Screen from the Main Menu.

2. Point to Closed-Captioned Mode.

3. Use the move buttons to select your choice.

.4. Select Exit to return to the Main Menu.

'TURNING OFF CLOSED CAPTIONING

1. Select Screen from the Main Menu.

2. Point to Closed Cap Disp.

3. Use the move buttons to highlight the OFF toggle and select it. The

closed captioning turns off.

.4. Select Exit to return to the Main Menu.

If you are unsure of the differences

among the modes, you may prefer to

leave the closed captioned mode set

to CC I. CC I displays complete text

of the program in the primary lang-

uage in your area.

ON-SCREEN PROGRAM DETAILS

Program providers have the option of sending information through the

airwaves along with their programs. If this information is available, the

TV can display it when you press INFO. To display the on-screen

program details:

1. PressINFO once to bring up the channel marker.

2. PressINFO again to bring up the program title and the program's

length and elapsed time.

3. PressINFO again for other program details such as the story line

and whether Closed-Captioning is available.

4. Press INFO again to clear the screen.

Wdhether all (or any) of the program /

etails are displayed depends on wheth- J

er the program provider sends the

information along with the program.

CHOOSING AN AUDIO PROCESSOR

Changing the audio processor changes the way your TV sounds. You

can adjust your audio processor by using the Audio Menu. For more

information, see Audio Menu.

Choosing an audio processor from the Audio Menu

1. Press MENU to bring up the Main Menu.

2. Press MENU again to select the Audio Menu.

3. Point to Audio Processor.

4. Use the move arrows to select an audio processor: Mono, Stereo,

Dolby 3 Stereo, Pro Logic, Matrix Surround, and Hall Surround.

These options are described on page 40.

JSING AND MODIFYING FETCH

Using Fetch

To use the commands currently stored in Fetch:

1. Pressthe Fetch button during normal viewing. The Fetch Menu appears.

By default, the menu includes the Sleep Timer slider from the Time

Menu, the Audio Processor toggle from the Audio Menu, the Contrast

slider from the Picture Quality Menu, and the Closed Cap Disp toggle

from the Screen Menu.

3. _ use the Contrast command, highlight Contrast and move the contrast

slider as you would if it were in its usual menu.

4. Point to Exit and press MENU to return to normal viewing.

Every command you find in the Fetch Menu behaves just as it would in

its usual menu.

Modifying Fetch

You can add a new command or replace existing commands in the Fetch

Menu. For example, to add the Equalizer command to the Fetch Menu:

PressMENU to bring up the Main Menu.

2. In the Living Room Main Menu, point to one of the speakers and press

MENU. The Audio Menu appears.

3. Flighlight Equalizer.

4. PressFETCH. The Fetch Menu appears, and the Equalizer command

appears to the right of the menu.

5. There are 5 slots in the FETCH Menu. To place the Equalizer control

panel in one of the slots, highlight the slot and press MENU. A message

appears telling you the command is in place.

6. PressMENU again.

7. PressCLEAR. You are returned to normal viewing.

Not all menu commands can be placed 1

in the Fetch Menu.

DISPLAYING ON-SCREEN HELP

When you are at the Main Menu--the family room--press Help in the

upper left corner of the family room to display reminders of the

locations of all available menus.

Menu Help

Every menu has a Help command. If you select it, detailed information

appears about the choices available in that menu.

For example,

1. PressMENU to bring up the Main Menu.

2. In the family room, point to the remote control and press MENU.

The Channel menu appears.

3. Use the move buttons to point to Help and press MENU. Helpful

information relating to the Channel menu appears.

Context Sensitive Help

This ProScan TV also provides Context-Sensitive Help. The TV knows

the buttons you press and will offer information tailored to your needs.

To use Context-Sensitive Help:

1. PressMENU to bring up the Main Menu.

2. In the family room, point to the screen and press MENU. The

Screen menu appears.

3. Point to a command, Closed Cap Disp for example.

4. Helpful information about the command appears in the lower right

of the screen. For example, if you highlighted Closed Cap Disp, this

message appears at the bottom of the screen:

Press < or > to turn the display

on, off, or on when sound is muted.

[If you select the reduced graphics op-

tion in the Assistance menu, the con-

text sensitive help is not displayed. ]

THINGS TO KNOW BEFORE

":ONNECTING COMPONENTS

Protect your components from power surges

• Connect all components before plugging any

power cords into the wall outlet.

• Alway s turn offtheTV andlor component

before you connect or disconnect any cables.

POSITION CABLES CORRECTLY TO

AVOID AUDIO HUM OR INTERFERENCE

Insert all cable plugs firmly into their jacks.

Place the audio/video cables to the sides of

theTV's back panel instead of straight down

the middle after you connect your

components.

Try not to coil any twin-lead cables and keep

them away from the audio/video cables as

much as possible.

Make sure all antennas and cables are

properly grounded. Refer to the SafetyTips

sheet packed with your TV.

PROTECT YOUR COMPONENTS

FROM OVERHEATING

Do not block ventilation holes in any of the

components. Arrange the components so

tlhat air can circulate freely.

Do not stack components.

Allow adequate ventilation when placing

your components in a stand.

Place an amplifier on the top shelf of the

stand so heated air rising from it will not

flow around other components.

CONNECT AUDIO/VIDEO CABLES FOR

BEST RESULTS

•Required for picture-in-picture feature

TV ONLY

This information applies to Connection A in the Connections Foldout.

Connection A provides:

• Stereo sound from broadcast programs

• Picture in Picture (PIP)

To use this connection you must have:

• (I) coaxial cable

To connect:

I. Connect cables as shown in Connection A.

2. Return to First Things First, then follow the steps in the

Interactive Setup.

USING CONNECTION A

To watch TV programs:

I. PressTV and tune to a channel.

I"/ u_ m,_ w_

See Connections Foldout, Connection A

TV AND MONO VCR

]'his information applies to Connection Bin the Connections Foldout.

Connection B provides:

• Stereo sound from broadcast programs

• Mono sound from VCR

•Picture in Picture (PIP)

• Viewing one channel on TV while recording another channel

To use this connection you must have:

•(2) audio/video cables

• (2) coaxial cables

To connect:

1. Connect cables as shown in Connection B.

2. Return to First Things First, then follow the steps in the

Interactive Setup.

USING CONNECTION B

To watch TV programs:

1. Turn VCR off.

2. PressTV and tune to a channel.

To record one program and watch another:

1. PressVCR1 and tune to a channel.

:2. Begin recording.

3. Make sure the TV/VCR switch on the VCR is set to TV.

4. PressTV and tune to a channel.

To play a tape on the VCR:

1. PressVCR1.

2. Press PLAY.

OII_AIiTENIqA

I"_'--°--_-°--e /

/_O •

See Connections Foldout, Connection B

TV AND STEREO VCR

This information applies to Connection C in the Connections Foldout.

Connection C provides:

• Stereo sound from broadcast programs

• Stereo sound from VCR

• Picture in Picture (PIP)

• Viewing one channel on TV while recording another channel

To use this connection you must have:

•(2) coaxial cables

• (3) audio/video cables

• (1) S-Video cable (optional)

To connect:

I. Connect cables as shown in Connection C.

2. Return to First Things First, then follow the steps in the

Interactive Setup.

USING CONNECTION C

To watch TV programs:

1. Turn VCR off.

2. PressTV and tune to a channel.

To record one program and watch another:

1. PressVCR1 and tune to a channel.

2. Begin recording.

3. Make sure the TV/VCR switch on the VCR is set to TV.

4. PressTV and tune to a channel.

To play a tape on the VCR:

1. PressVCR1.

2. PressPLAY.

+" I Y

See Connections Foldout, Connection C

TV AND VCR USING A SPLITTER

This information applies to Connection D in the Connections Foldout.

Connection Dprovides:

•Stereo sound from broadcast programs

• Stereo sound from VCR

• Picture in Picture (PIP)

• Viewing one channel on TV while recording another channel

To use this connection you must have:

• (1) splitter

• (3) coaxial cables

• (3) audio/video cables

•(1) S-Video cable (optional)

To connect:

1. Connect cables as shown in Connection D.

2. Return to First Things First, then follow the steps in the

Interactive Setup.

USING CONNECTION D

'To watch TV programs:

1. PressTV and tune to a channel.

1"O record one program and watch another:

1. PressVCR1 and tune to a channel.

12. Begin recording.

13. PressTV and tune to a channel.

To play a tape on the VCR:

1. PressVCR1.

2. Press PLAY.

66,

TV AND SATELLITE RECEIVER

This information applies to Connection E in the Connections Foldout.

Connection E provides:

•Stereo sound from broadcast programs

• Stereo sound from the satellite receiver

• Picture in Picture (PIP)

To use this connection you must have:

• (2) coaxial cables

• (3) audio/video cables

• (1) S-Video cable (optional)

To connect:

1. Connect cables as shown in Connection E.

• 2. Return to First Things First, then follow the steps in the

Interactive Setup.

USING CONNECTION E

To watch TV programs:

1. PressTV and tune to a channel.

To watch satellite programming:

1. Press SAT.CABLE and tune to a channel.

,S_TEI.UI_ I...

,_e •

See Connections Foldout, Connection E

TV, VCR, AND SATELLITE RECEIVER

This information applies to Connection F in the Connections Foldout.

Connection F provides:

• Stereo soundfrom broadcast programs

• Stereo sound from the satellite receiver

• Stereo sound from VCR

To use this connection you must have:

• (4) coaxial cables

• (6) audio/video cables

• (2) S-Video cables (optional)

To connect:

I. Connect cables as shown in Connection F.

2. Return to First Things First, then follow the steps in the

Interactive Setup.

USING CONNECTION F

To watch TV programs:

1. Turn off VCR and satellite receiver.

2. PressTV and tune to a channel.

To watch satellite programming:

I. PressSAT,CABLE and tune to a channel.

To record off-air (cable or antenna) broadcasts and watch

a different channel:

1. Turn satellite receiver off.

2. PressVCR1 and tune to a channel.

3. Press RECORD to begin recording.

4. To watch another channel, make sure the TViVCR switch on the

VCR is set to TV; then press TV and tune to a channel.

To play a tape on the VCR:

I. PressVCRI and then press PLAY.

Caution: The unauthorized recording

of certain programs may infringe upon

the rights of others.

Ii i

See Connections Foldout, Connection F

TV, VCR, AND SATELLITE RECEIVER

USING ASPLITTER

This information applies to Connection G in the Connections Foldout.

Connection G provides:

•Stereo sound from broadcast programs

• Stereo sound from VCR

• Stereo sound from the satellite receiver

• Picture in Picture (PIP)

• Viewing one channel on TV while recording another channel

To use this connection you must have:

• (5) coaxial cables

• (6) audio/video cables

• (2) S-Video cables (optional)

• (I) splitter

To connect:

1. Connect cables as shown in Connection G.

2. Return to First Things First, then follow the steps in the

Interactive Setup.

USING CONNECTION G

To watch TV programs:

1. Turn VCR and satellite receiver off.

2. PressTV and tune to a channel.

To watch satellite programming:

I. PressSAT-CABLE and tune to a channel.

caalJ[ll@l

See Connections F.oldout, Connection G

'To record off-air (cable or antenna) broadcasts and watch

adifferent channel:

1. Turn satellite receiver off.

2. PressVCR1 and tune to a channel.

3. Press RECORD to begin recording.

4. To watch another channel, make sure the TV/VCR switch on the

VCR is set to TV; then press TV and tune to a channel.

To play a tape on the VCR:

1. PressVCR1 and then press PLAY.

ADDING A LASERDISC PLAYER

-[his information applies to Connection Hin the Connections Foldout.

Connection H provides:

,, Stereo sound from a Laserdisc player

ro use this connection you must have:

• (3) audio/video cables

To connect:

I. Connect cables as shown in Connection H.

2. Return to First Things First, then follow the steps in the

Interactive Setup.

USING CONNECTION H

To play a laserdisc:

1. Press DVD,VCR and then press PLAY.

;70

CONNECTING EXTERNAL SPEAKERS

You can connect up to six additional speakers to the TV: two to the

FRONT SPEAKERSterminals, two to the CENTER SPEAKERS,and two

to the REARSPEAKERSterminals.

Front (Main) Speakers

lb connect external front speakers:

1. Connect speakers to the MAIN speaker terminals.

2. Set the SPEAKERSWITCH to EXTERNAL.

--main

--surround

Center Speakers

To connect external center channel speakers:

1. Connect speakers to the CENTER CHANNEL terminals.

2. Set the SPEAKERSWITCH to EXTERNAL.

Rear Speakers

to connect rear speakers for surround sound effects.

1. Connect two speakers to the SURROUND terminals.

2. Position them behind you in your TV room. To improve the

surround sound effect, you may prefer to set or mount the speakers

several feet off the ground.

Connecting Speakers to the TV

1. If necessary, remove the vinyl covering from the ends of the speaker

wire and twist the wire core.

2. Pressdown and hold the lever on the speaker terminal.

3. Insert the wire core into the hole. Be sure to connect the (+) to (+)

and (-) to (-).

4. Release the lever. Pull gently on the wire to see that it's connected

securely.

Connecting a Subwoofer

To connect a subwoofer to the TV:

• Connect the subwoofer's audio input to the left (L/MONO) TV

TUNER OUTPUT jack.

IMPORTANT

When connecting the speaker wire,

make sure you connect the positive

(+) terminal on theTV to the positive

(+) terminal on the speaker. One side

of the speaker wire is usually marked

with a white stripe to help you match

up the terminals correctly. If the (+)

and (-) terminals are not matched

properly, the speakers will not be "in

phase" causing reduction in bass

frequencies.

Do not allow the wire core to touch

other wires or terminals. Damage to

components could result if the cores

of two wires touch each other.

CONNECTING AUDIO COMPONENTS

Connecting a stereo amplifier

1. Connect the amplifier's TV audio inputs to the left (L/MONO) and

right (R) TV TUNER OUTPUT jacks.

2. You may prefer to turn off the TV's internal speakers by selecting a

speaker configuration with external speakers from the

Audio menu.

If your audio amplifier is part of a system that uses its own remote

control, you may prefer to connect it to the TV using the Fixed

Output jacks.

Important: Do not use the amplifier's PHONO inputs. If the

amplifier is not stereo, use the L/MONO IV TUNER OUTPUT jack.

Consult the amplifier's owner's nnanual for the manufacturer's

recommended hookup.

Connecting a tape deck

1"o use a tape deck to record audio from TV:

1. Connect the tape deck's audio inputs to the FIXED OUTPUT jacks

on the back of the TV.

I IXED 1

OUTPUT

Tape Deck Connection

The FIXED OUTPUT jacks provide a

fixed level audio signal, making them

ideal for audio recording, or for use

with an audio amplifier that has its

own remote control. No matter how

the volume changes on theTV, the

output volume stays the same.

7:2

CONNECTING ACAMCORDER FOR PLAYBACK

]here are two connections recommended for playing back from the

camcorder to the -IV:

Front.Connection Playback

1. Locate the AV adapter included with your TV accessories.

2. Connect the camcorder's video output to the adapter's video

input (yellow).

3. Connect the camcorder's audio output to the adapter's audio

input (white).

4. Connect the adapter to the A,V jack on the front of the TV.

!5. PressINPUT on the remote until the channel marker

displays FRNT.

6. Start playback on the camcorder.

Back Connection Playback

1. Connect the camcorder's audio/video outputs to the INPUT1 audio

and video jacks on the TV.

2. Press INPUT on the remote until the channel marker

displays VlD1.

3. Start playback on the camcorder.

S-VHS CAMCORDER

TO connect a camcorder with S-Video capability:

1. Connect an S-Video cable from the camcorder to the S-VIDEO1

jack on the TV.

2. Connect the camcorder's audio/video outputs to the INPUT1 audio

and video jacks on the TV.

3. PressINPUT on the remote until the channel marker

displays VID1.

4. Start playback on the camcorder.

CONNECTING A CAMCORDER TO RECORD

FROM THE TV

To record from the TV to the camcorder:

1. Connect the camcorder's audio/video input cables to the TV's

FIXED OUTPUT jacks.

2. Consult your camcorder's owner's manual for instructions on

camcorder recording.

S-VHS Camcorder

The TV does not supply video output in S-Video form. Use the

connection described above.

TheTV must remain on during re-

cording. If you change channels on

theTV, the channel change will be

recorded.

Signals from the S-Video connector

do not come through the FIXED

OUTPUT video jack.To record to an

S-Video component, remember to

connect its regular video cable as

well as the S-Video cable.

The PIP window and on-screen menus

and displays will not be recorded. If

you change channels on theTV, the

channel change will be recorded.

TROUBLESHOOTING

Troubles sometimes are caused by simple "faults" that you can correct

without the help of a service technician. If you experience any

difficulty with your TV, check a few basic remedies before calling your

service technician.

TV will not turn on

• Check to make sure it is plugged in.

• Check the wall receptacle (or extension cord) to make sure it is

"live" by plugging in something else.

• Maybe batteries in remote control are "dead."

• Maybe remote control was not aimed at remote sensor.

Controls don't work

• If using remote control, make sure remote is in TV mode by first

pressing TV button.

• Try unplugging set for two minutes and then plug it back in and turn

it on again.

Problems with Remote

•Maybe something was between the remote and the remote sensor.

Maybe the remote was not aimed directly at the component (TV or

VCR) you were trying to control.

• Maybe remote is not in TV Mode. Pressthe TV button so remote

will control TV.

• Maybe batteries in remote are weak, dead or installed incorrectly.

Try replacing the batteries.

Remote stops working

• Remove batteries and hold down one or more buttons for several

seconds. Install the batteries and try remote.

TV Works, Can't Tune to Channel

•Maybe TV is in FAV channel mode. Check the Channel List toggle

in the PIX+ Options part of the Screen Menu.

TV Turns off while playing

• Schedule function may have been activated.

• Protection circuit may have been activated because of a power

surge. Wait 30 seconds and then turn on again. If this happens

frequently, the voltage in your house may be abnormally high.

TV Turns on unexpectedly

• Schedule On function may have been activated.

Schedule does not turn off the TV at the set time

• Check schedule on/off function (it must be set to On).

• Check to make sure clock is set to the correct time.

Blank screen

• Maybe the device connected to the input jacks is not turned on.

• Try another channel.

• PressRESET,in case the picture controls are set too low.

No sound, picture okay

• Maybe sound is muted. Try pressing volume up button to

restore sound.

• Maybe TV's speaker configuration is wrong. Check Speakers

command in the Audio menu.

• If using an S-VHS component, remember to also connect the

component's L and R AUDIO OUT jacks to the TV's L and R INPUT

1 jacks.

• Maybe SPEAKERswitch on the back of the TV is not in the

INTERNAL position.

Can't select certain channel

•If using a VCR, check to make sure the TV/VCR switch on the VCR

is in the correct position.

Noisy stereo reception

• May be aweak station. Use SURROUND button to change to

mono mode instead of stereo.

No picture, no sound but power light is on

• Maybe someone changed cable/air function to wrong position.

• Maybe a vacant channel is tuned.

• If watching VCR (connected only through antenna input), make

sure TV is tuned to channel 3 or 4 - same as CH3/4 switch on VCR.

Also check to make sure TV/VCR switch on VCR is in correct

position.

Sound okay, picture poor

• Check antenna connections.

• Try adjusting Video Noise Filter to improve weak signals.

Black Box appears on the screen

• Captioning may be turned on. Check the Closed-Caption Display

control in the Channel Menu.

76,

LIMITED WARRANTY

What your warranty covers:

• Any defect in material or workmanship.

For how long after your purchase:

•One year for labor charges.

•One year for parts.

•Two years for picture tube.

(The warranty period for rental units begins with the first rental or 45 days from date of shipment to the

rental firm, whichever comes first.)

What we will do:

• Pay any Authorized PROSCAN Television Servicenter the labor charges to repair

your television.

oPay any Authorized PROSCAN Television Servicenter for the new or, at our option, rebuilt

replacement parts and picture tube required to repair your television.

How you get service:

*Request home service from any Authorized PROSCAN Television Servicenter. To identify your

nearest Authorized PROSCAN Television Servicenter, ask your Dealer, look in the Yellow Pages, or

call 1-800-PROSCAN.

o Show the service technician your evidence of purchase date.

What your warranty does not cover:

• Customer instruction. (Your Owner's Manual clearly describes how to install, adjust, and operate

your television. Any additional information should be obtained from your dealer.)

• Installation and related adjustments.

• Signal reception problems not caused by your television.

• Damage from misuse or neglect.

• Remote control batteries.

• Customer replacable fuses.

• Images burnt onto the screen.

•A television that has been modified or incorporated into other products or is used for institutional or

other commercial purposes.

• Acts of God, such as, but not limited to lightning damage.

• A television purchased or serviced outside the U.S.A.

Product Registration:

•Please complete and mail the Product Registration Card packed with your set. It will make it

easier to contact you should it ever be necessary. The return of the card is not required for

warranty coverage.

How state law relates to this warranty:

•This warranty gives you specific legal rights, and you also may have other rightsthat vary from state

to state.

If you purchased your television outside the U.S.A.:

• This warranty does not apply. See your dealer for details.

CARE AND CLEANING

You can clean the TV as required, using a soft cloth or the dusting

attachment for your vacuum cleaner. Be sure to occasionally vacuum the

ventilation slots in the cabinet to help assure adequate ventilation.

To clean the TV screen, use a diluted soap and water mixture and a soft

cloth. Do not use furniture polish on the "IV cabinet or screen.

While cleaning do not spray liquid directly on the screen, or allow liquid

to run down the screen and inside the TV. Also, avoid placing drinks or

vases with water on top of the TV. This could increase the risk of fire or

shock hazard or damage to the TV.

eneral Cable Information

Antenna (or cable-TV) connections are made with either

coaxial antenna cable or twin-lead cable. Coaxial cables

are shielded so they are lesssusceptibleto hum or

interference from adjacent cables.

Round 75-ohm coaxial cable

Slip-on Connector

Screw-on Connector

Flat 300-ohm twin-lead cable

Most audio/video connections between components can

be made with shielded audio and video cables that have

RCA-type phono connectors.

-_÷sndard Audio/Video Cable with

A-type phono plugs

Color-Coded Jacks

The jacks on the TV's monitor panel are color-coded for

ease of use. The VIDEO jacks are yellow, the right AUDIO

jacks are red, and the left AUDIO jacks are white. When

connecting components to each other, be sure that you

always connect left outputs to left inputs and right outputs to

right inputs. If acomponent has only one output (mono),

connect it to the R/MONO INPUT jack. To connect S-VHS

(Super-VHS) components, an S-Video cable is required.

Gold-Plated Jacksand Gold-Tipped Cables

Your ProScan monitor panel isequipped with gold-plated

jacks. The gold plating helps prevent oxidation of contacts

which provides much lesslossthan conventional contacts. A

_-_mplete line of gold-tipped cables is available to help you

stain optimum performance from your equipment.

The following accessories are available from most ProScan

dealers and electronics supply stores in case you want to

position your components farther apart or need additional

cables.

Antenna Cables

Screw-on Cable

Attaches to the round antenna connect-

ors (called 75-ohm F-type) on the back

of your VCR or TV. The ends screw onto

the connectors for a secure l_onnection.

Push-on Cable

Attaches to the round, antenna connect-

ors (called 75-ohm F-type) on the back

of your VCR or TV. Ends push on for a

quick connection.

Audio/Video Cables

Audio/Video Cable

Shielded cable for connecting AUDIO

and VIDEO jacks. Has an RCA-type

phono plug on each end.

Monaural VCR Dubbing Cable

Double cable that lets you connect the

VIDEO and AUDIO jacks of two VHS

VCRs to duplicate tapes. Can also be

usedto connect a VCR to your TV.

Cable is color-coded and shielded. Has

RCA-type phono plugs on each end.

Stereo VCR Dubbing Cable

Triple cable that letsyou connect

the VIDEO and AUDIO jacks of stereo

components.

Audio/Video Cables continued

Stereo Audio Cable

Double gold-tipped

cable generally usedfor

connecting stereoaudio

components.

S-Video Cable

Has multipin connectors

on each end for con-

necting S-VHS compo-

nents to your TV.

Accessories

228449

Audio- Video Adapter

Use the Audio.Video

adapter to plug a cam-

corder into the front of

the TV. Replacements

or spares can be

ordered as needed.

Remote Controls

I=1 a

•:'_T o

CRK81BL1 CRK61A1

Remote Controls

These are the remote

controls that came

packed with your

TV. Replacements or

spares can be ordered

as needed.

0.)

(1)

Accessory Order Form for ProScan TV Models

Description

Signal Splitter

Gold-Tipped Antenna Cable (6-ft)

Gold-Tipped Antenna Cable (I O-if)

Gold-Tipped Audio/Video Cable (3-ft)

Gold-Tipped Audio/Video Cable (5-ft)

Gold-Tipped Stereo Cable (3-ft)

Gold-Tipped Dubbing Cable (6-ft)

Screw-on Antenna Cable (3-ft)

Wireless Headphone System

S-Video Cable (8-ft)

S-Video Cable (3-ft)

Remote Control (CRK61AI )

Remote Control (CRK81 BL I )

Audio°Video Adapter

Part No.

AH047 $ 3.95

AH065G $ 5.95

AH066G $ 4.95

AH069G $ 3.95

AH070G $7.99

AH072G $ 11.95

AH075G $ 5.95

AH077G $ 9.95

AH037 $ 4.95

PSWH100 $149.95

VAA020 $ 29.95

186008 $ 27.55

221245 $ 35.45

233066 $ 54.05

228449 $ 4.35

Prices are subject to change without notice.

Total Merchandise ($10 Minimum Order) ...........................

Sales Tax .............................................................................

We are required by law to collect the appropriate sales tax

for each individual state, country, and locality to which

the merchandise is being sent.

Shipping, Handling, and Insurance .....................................

Total Amount Enclosed ........................................................

Use VISA or MasterCard preferably.

Money order or check must be in U.S. currency only.

No COD or CASH.

All accessoriesare subject to availability.

Where applicable, we will ship a superseding model.

Total

Charge your orderon your VISA

or MasterCard by

filling in below

USE YOUR CREDIT CARD

IMPORTANT: Copy complete account number

from your VISA card

VISA"

FT-T--n FFT--1FFr-q T-1

Mycardexpi ,:I-I--II-I-I

IMPORTANT: Copy complete account number

from your MasterCard

Fl--]--n FI--T--T-q Fq-Yun

Copy Number F-T-T_

above your

name on

MasterCard

My.card _

expn'es:

AUTHORIZED SIGNATURE

Prices are subjectto changewithoutnotice.

PLEASE Print or type your name and

address clearly. This will be your

mailing label.

A complete and correct order will

save you days of waiting.

Nalne:

Street:

City:

State:

Apt:

Zip:

To order accessories,contact your local ProScan Dealer.

If a dealer is not nearby, follow the instructions below to

order by telephone.

United States and Canadian Orders

To place your order by phone, have your Visa or

MasterCard ready and call the toll-free number listed below

between 8 AM and 8 PM Eastern Standard Time. Use this

number only to place an order for accessoryitems listed on

this order form.

1 - 800 - 338 - 0376

Most times your order will be shipped UPS within 72 hours

of receipt. If ever it is not possible to shill'within 30 days,

we will notify you with an update on your order and an

option to cancel.

To place your order by mail, detach and mail the completed

order form with credit card information, money order, or

check in U.S. currency (made payable to Thomson

Consumer Electronics, Inc.) to the following address:

ProScan Video Accessories

P.O. Box 8419

Ronks, PA 17573

For more information on these accessories(or current

prices), write to the following address:

Video Accessories Customer Service

Thomson Consumer Electronics, Inc.

Distributor & Special Products

2000 Clements Bridge Rd

Depfford, NJ 08096-2088

International Orders

This offer is valid only in the 50 United States and Canada.

For international orders, please send your request for

quotation (not an order) to:

International Customer Service

Thomson Consumer Electronics, Inc.

Distributor & Special Products

2000 Clements Bridge Rd

Deptford, NJ 08096-2088

Symbols

(0-9) ........................................................................... 32

AoV ...:....................................................................... 38

AoV jack .................................................................... 73

Additional speakers .................................................... 71

Advanced Features ..................................................... 51

ANT B input, note ...................................................... 36

ANTENNA ................................................................. 33

Arrows ....................................................................... 33

Audio component ...................................................... 32

Audio Menu ............................................................... 40

Audio Processor ......................................................... 40

Auto Channel Search ................................................. 46

Auto Color ................................................................. 42

AV adapter ................................................................. 73

AV adaptor ................................................................. 38

Available input sources .............................................. 33

Back Panel ................................................................. 36

INPUT 1..................................................................... 36

Black Level ................................................................ 42

Cable box .................................................................. 25

Care and Cleaning ..................................................... 78

CH CTR/ .................................................................... 33

CHAN .................................................................. 32, 45

Change the channel ................................................... 32

Channel information .................................................. 32

Channel list ................................................................ 43

Channel Menu ........................................................... 45

Channel menu ............................................................. 8

Channel numbers ....................................................... 32

CLEAR.................................................................. 12, 33

Closed Caption Mode ................................................ 43

Closed Captioning Display ......................................... 43

CODE SEARCH .......................................................... 28

Color .......................................................................... 42

Color Warmth ............................................................ 42

Connect a camcorder ................................................. 38

Connecting a Camcorder ..................................... 73, 74

Connecting a stereo amplifier ..................................... 72

Connecting a Subwoofer ............................................ 71

Connecting a tape deck .............................................. 72

Connecting Audio Components ................................. 72

Connecting Speakers .................................................. 71

Connecting to an AiV receiver ................................... 37

Contrast ............................................................. •....... 42

Control Panels............................................................ 12

Sliders ..................................... _............................. 12

Control panels .............................................................. 9

Current channel list .................................................... 43

DVD°VCR ................................................................. 32

DVDoVCR mode ....................................................... 32

Entering channel numbers .......................................... 32

Equalizer .................................................................... 40

Exit ......................................................... ........... •.......... 8

FAVolNPUT ............................................................... 33

Favorite channel list ................................................... 43

FREEZE................................................................. 33, 43

Front Panel................................................................. 38

Front Speakers............................................................ 71

Go Back ..................................................................... 32

GUIDE TO THE MENU SYSTEM................................ 39

Hall Surround ............................................................ 40

Headphone ................................................................ 38

Headphone Audio ...................................................... 41

Headphone Volume .................................................. 41

Home computers, note ............................................... 36

INFO .......................................................................... 32

INPUT 1..................................................................... 36

Input sources .............................................................. 33

INPU'i2 ...................................................................... 36

Interactive Setup ........................................................ 17

Key Combination chart .............................................. 28

L/MONO audio jacks ................................................. 36

Lightbulb button ......................................................... 33

Main Menu ................................................................ 33

Matrix Surround ......................................................... 40

MENU ................................................................. 13, 33

Menu commands ....................................................... 39

Menu system ................................................................ 9

Menus ......................................................................... 9

MOVE ........................................................................ 33

MOVE (Arrows) ....................................................... 8,33

MUTE ........................................................................ 32

Mute .......................................................................... 40

Number Buttons ......................................................... 32

Numeric entry control panel ...................................... 14

On-screen menus ......................................................... 8

On-screen setup routine ............................................. 17

Options ...................................................................... 43

Picture Controls ......................................................... 42

Picture Quality ........................................................... 12

Picture Quality Menu ................................................. 42

Picture Quality menu ................................................. 12

Picture-in-Picture .................................................. 33,43

Picture-outside-Picture ............................................... 43

PIP ...................................................................... 33, 43

PIP window ................................................................ 33

PIX+ ........................................................................... 43

Point ............................................................................ 8

Point and Select ........................................................... 8

Polarity switch ........................................................... 37

POP ........................................................................... 43

Program information .......................................... _...... 32

Program the VCR button using CODE SEARCH .......... 28

Program the VCR button using DIRECT E_TRY .......... 28

Programming the Remote ........................................... 21

Programming the remote to control a laserdisc player ....

.......... •........... •....•.............. ........................................ 26

Programming the remote to control a satellite receiver ...

......... •.................. •..................................................... 24

Programming the remotes .......................................... 22

Programming the Simple Remote ............................... 28

Programming the Universal Remote to Control a VCR ....

........................................................................... 22, 26

Pro Logic .................................................................... 40

Quick Reference ........................................................ 39

Rear Speakers .................................................................... 71

Remote Buttons ............................................................ 32,33

VCR1 ......................................................................... 32

RESET......................................................................... 33

Reset Picture Controls ................................................ 42

Return to TV ............................................................... 13

REW, PLAY,FF, REC, STOP, PAUSE ............................ 32

RIGHT audio jacks .................................................... 36

S-VHS camcorder ....................................................... 73

S-VIDEO .................................................................... 36

SAT,CABLE ..................................................... 24,25,32

SAT,CABLE button ...................................................... 3

SCAN ......................................................................... 33

Schedule .................................................................... 44

Select ........................................................................... 8

Set Time and Day ....................................................... 44

Set Time numeric entry control panel ......................... 14

Sharpness ................................................................... 42

SIGNAL SOURCE ....................................................... 37

Signal"Type 13

Signal Type Choice list ............................................... 13

Simple remote ....................................................... 28,34

Simple Remote Buttons .............................................. 34

CHAN DOWN ...................................................... 34

CHAN UP ............................................................. 34

MENU ................................................................... 34

POWER ................................................................. 34

TV ......................................................................... 34

VCR ...................................................................... 34

VOL < ................................................................... 34

VOL > ................................................................... 34

Simple Remote VCR Codes ........................................ 29

Simple remote's VCR button ....................................... 28

Single Picture ............................................................. 43

SKIP ........................................................................... 32

Sleep Timer ................................................................ 44

Sliders ........................................................................ 12

Sound Check .............................................................. 41

Speaker Switch ........................................................... 71

Speakers ..................................................................... 40

Split Screen ................................................................ 43

Stereo headphones ..................................................... 38

STRENGTH switches .................................................. 37

SWAP ......................................................................... 33

Universal remote .................................................. 21, 22

Universal Remote VCR Codes .................................... 23

VCR Codes ........................................ ......................... 23

VCR mode ................................................................. 32

VCR1 ......................................................................... 32

VCR1 button ........................................................ 22, 32

VlD1 .......................................................................... 33

VlD2 ................................................................... 33

Video games, note ...................................................... 36

VIDEO jacks ............................................................ 36

Video Noise Filter ...................................................... 42

VOL ........................................................................... 32

Volume Limit ............................................................. 41

Theatre ....................................................................... 42

Three-digit channel .................................................... 32

Time Display .............................................................. 44

Time Menu ................................................................. 44

Tint ...................................................................... 12, 42

Tour of the TV ............................................................ 31

TV button ................................................................... 32

CREATING A GREENER FUTURE

At Thomson Consumer Electronics we are dedicated to the preservation of our

natural heritage and to a healthy and safe way of life for current and future

generations. This is a global effort which encompasses every THOMSON facility

throughout the world.

We believe that clean air, clean water, a protected earth, and healthy people are not

only practical and desirable goals, but achievable ones as well. Our Corporate

Environmental, Health and Safety Charter acknowledges our commitment to protect

these precious assets and provides a challenging vision and guideline for conducting

our business.

fo_ THOMSON CONSUMER ELECTRONICS

Below are a few examples of Thomson's achievements in our efforts to preserve our natural resources.

TH E EARTH THE AIR TH E WATE R

Thomson reclaims millions of pounds of

hazardous waste annually, diverting it

from landfills.

Thomson treats millions of pounds of

waste water sludge annually and

renders it non-hazardous.

Thomson recycles over 50 million

pounds of non-hazardous material

annually that otherwise would have

been treated as trash, an overall

recovery rate of 50%.

Thomson globally recycles millions of

pounds of broken television picture

tube glass annually through both

internal and external reclaim processes.

Thomson has replaced solvent-based

paints at many locations resulting in an

80% reduction in toxic air emissions for

equivelant material used.

Thomson has eliminated the use of

ozone-depleting substances at television

manufacturing facilities around the

world.

Thomson collects and returns over 1.5

million pounds of glass and furnace dust

to the glass making process annually.

Thomson has launched worldwide

energy savings programs which contrib-

ute to efforts to reduce air emissions

from electrical generating facilities.

Thomson recovers over 2 million

pounds of fine glass particles from

process water each year and recycles

them back into its glass furnaces.

Thomson°s state-of-the-art waste water

treatment plants filter out over 26

million pounds of solids from process

water each year.

Thomson's U.S. glass factory recycles

2,500 gallons of water per minute and

cleans 2.6 million gallons of water

per day.

Thomson is researching new processes

and is developing new manufacturing

equipment and technologies to further

reduce large volume water use.

Thomson has also increased its usage of recycled materials for packaging of our products. For example, in the U.S. and Mexico

our television plants use recycled content in our television cartons and instruction booklets. The inks used for the print on

cartons and instruction booklets are soy based. For a free brochure regarding Thomson's Environmental Health and Safety

Programs, write to T_homson Consumer Electronics' address below, attention Environmental Programs: INH340.

Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in

service for your product.

THOMSON CONSUMER ELECTRONICS

10330 North Meridian Street

Indianapolis, IN 46290

Trademark(s)® Registered

Marca(s) Registrada(s)

Printed in USA

TOCOM 15137320

The following materials were used in

printing this publication:

1OO%

RECYCLEDPAPER

MINIMUM50%POSTCONSUMER

J"-_j IPRINTEDWITHI

I . JISOYINKL,

Proscan Tv Users Manual

RCA Direct View Digital 27 to 40 TV Manual 97100067 RCA Direct View Digital 27 to 40 TV Owner's Manual, RCA Direct View Digital 27 to 40 TV installation guides

CRT Television to the manual 9d9e9967-9347-47bf-815d-8a77bbf90536

Navigation menu

Versions of this User Manual:

Views

Navigation