Proview Electronics 998 User Manual 8

Download:
Mirror Download [FCC.gov]
Document ID	14694
Application ID	YutHjJdGLv+Wrm53i3DWrg==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	27.06kB (338255 bits)
Date Submitted	1998-12-03 00:00:00
Date Available	1998-12-30 00:00:00
Creation Date	2001-07-12 13:19:36
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-07-12 13:19:37
Document Title	8

Table of Contents
‘ F.C.C. statement
Important safeguards
[i I? 1. ln(rollnc(ion
1.1 General Information
1.2 Features ..
1.3 Check list
2. Installing the monitor
2.1 Powcr cable connection.
2.2 Signal cable connection.
2.3 Microphone and speaker cable connection
2.4 Power ON....
25 Sclflesr panem
2.6 Adjust the picture,
3. Operation
3.1 Power ON/OFF switch...
3.2 Power (DPMS) indicator,
3.3 Using the volume and OSD control.
3.1 OSD menus...
3.5 Volume mu!
3.6 Built — in Microphon
3.7 Safety protection
3.8 Timing Guide...
3.9 Plug and Play...
3.10 Fewer manageme ............... .1-1
4. chhnicullnformation
4.1 Products specifications ..........
4.2 Signal connector pin assignment.
4.3 Troubleshooting .................
Ups- oo/fl'
p“ 39 : 136 993!
FEDERAL COMMUNICATIONS
COMMlSSlON(F.C.C)STATEMENT
This equipment has been tcslcd and l‘uund to comply with the limits ofa Class
B dlgitnl device, Pursuant to Putt [5 of lhc: FCC Rules. These limits are
designed to provide reasonable ptolcction against harmful interference in a
residential installation. This equipment generates, uses and can radiate rndio
fmquetlcy energy and, if not installed and used in accordance with the
instructions may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a paniculnr
installation. lt‘ this equipment does cause harmful interference to radio or
television reception, which can be determined by Iuming the equipmcnl all"
and on, the user is encouraged to try to correct the interference by one or more
ofille following measures:
l. Remnant/Relocate the receiving antenna,
2. Increase the separation between the equipment and receiver.
3, Connect the equipment into an outlet on a Circuit ditTerent from that to
which the receiver is connected
4. Consult the dealer or an experienced radio/TV tcehnicizn for help
CAUTlON : Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the users
authority to operate the equipment.
IMPORTANT SAFECUARI)S
I, Read all ofllicsc instructions.
2. Save these instructions for later use.
3, Unplug this monitor from the wall outlet before cleaning. Do not use liquid
cleanch or aerosol cleaners. Use a damp cloth for cleaning.
4, Do not use attachments not recommended by the monitor manufacturer as
they may cause hazards.
5. Do not use this monitor near water, For example near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool,
etc...
6, Do not place this monitor on an unstable cart, stand, or table. The monitor
may fall, causing serious injury to a child or adult, and serious damage to
the appliance. Use only with a cart or stand recommended by the
manufacturer or sold with monitor. Wall or shelf mounting should follow
the manufacturer's instructions, and should use a mounting kit approved by
the manufacturer.
7. Slots and openings in the cabinet and the back or bottom are provided for
ventilation, and to insure reliable operation of the television receiver and to
protect it from overheating, these openings must not be blocked or covered.
The openings should never be blocked by placing the monitor on a bed, sot‘a,
mg, or other similar surface, This monitor should never be placed near or
over a radiator or heat register. This monitor should not be placed in built—in
installation such as a bookcase unless proper ventilation is provided.
8. This monitor should be operated only from the type of power source
indicated on the marking label. if you are not sure of the type of power
supplied in your home, consult your monitor dealer or local power
company.
9. This monitor is equipped with a titreeflvire grounding type plug, a plug
having a third (grounding) pin. This plug will only fit into a grounding-type
power outlet. This is a safety feature. If you are unable to insert the plug7
into the outlet. contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose ofthe grounding—type plug.
10.Do not allow anything to rest on the power cord, Do not locate this monitor
where the cord will be abused by persons working on it.
ll.Follow all Warnings and instructions marked on the monitor.
12.For added protection for this monitOr, when it is left unattended and unused
for long periods of time, unplug it from the wall outlet. This will prevent
damage to the monitor due to power—line surges.
l3.Do not OVerload wall outlets and extension cords as this can result into fire
or electric shock.
l4.Nevcr push objects of any kind into this monitor through cabinet slots as
they may touch dangerous voltage points or short out parts that could result
in a fire or electric shock. Never spill liquid ofany kind on the monitor,
15.Do not attempt to service this monitor yourscll' since opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
16.UanUg this monitor from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed,
b. lfliquid has been spilled into the monitor.
c. lfthe monitor has been exposed to rain or water.
d. If the monitor does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as improper adjustment of other controls, may result in
damage and will often require extensive work by a qualified technician
to restore the monitor to normal operation.
e. lfthe monitor has been dropped or the cabinet has been damaged.
f, When the monitor exhibits a distinct change in performance this
indicated a need for service.
l7rthn replacement parts are required, be sure the service technician has
used replacement pans specified by the manufacturer that have the same
characteristics as the original parts. Unauthorized substitutions may result
in fire, electric shock, or other hazards.
18.Upon completion of any service or repairs to this monitor, ask the service
technician to perform routine safety checks to determine that the monitor is
in safe operating condition.
19 The socket outlet shall be near the equipment and shall be easily accessible.
20.The power supply cord is used as the main disconnect device.
introduction
.1 General Information
This monitor is a high-performance intelligent multi- scan color monitor.
It is designed to be compatible with all display modes between
30KHz and 95KHZ for 17-inch monitor (Model No:795), JOKHZ and
98KHZ for 19—inch monitor (Model Noz998), 30Kllz and 85Kl-lz for
17-inch monitor (Model No:785)/ 19-inch monitor (Model Noz985).
The OSD control allows you to easily and simply make precise
screen format adjustments, while user programmability provides cross
platform compatibility. The visible image area (VIA), which is the
actual viewing area of the screen, is 15.7 inches On the 17»inch
monitor and 17,9 inches on the 19-inch monitor.
.2 Features
I Multi - scanning at horizontal frequencies of30KHz to 95KHZ/
30KHz to SSKHZ (17-inch), 3010-12 to 98KHz / 30Kl—lz to SSKHz
(19-inch), and vertical frequencies of SOHZ to lSOl—lz.
I Microprocessor-based design with OSD (On Screen Display)
control.
I Compatible with standard IBM VGA, extended VGA, super
VGA, IBM XGA modes, as well as VESA resolution standards.
I Universal power supply.
I Perfectly flat face (For 17~inch).
I TCO 95 compliant.
I EPA Energy Star compliant power saving.
I VESA Display Power Management (DPMS) compatible.
I Microsoft windows 95 compatible & VESA Display Data
Channel (DDC) l/ZB compatible.
I Side-mount provision for optional speakers (AR/AK-SOO/PRO
5-10).
a” I 5 country language on 080 which you can choice, it includes
English, Spanish, German, France, Chinese.
I Built-in microphone to optimize speakerphone functionality.
[43 Checklist
Before operating this monitor, please make sure that all ofthe
following items are included:
I your monitor
I Microphone cable
I This user’s manual
I Power cord
If any of these items are missing‘ please contact your dealer for
technical support and customer service.
NOTE : Be sure to save original box and all packing material for
future transport of the monitor.
2. Installing the monitor
To install the monitor, ensure that the power to the monitor
computer system, and other attached devices is tumecl off, and
follow these steps:
,l Power cable connection
Plug power cord into the power supply ofPC or into the wall outlet
of the powerr A three - wire cord is provided as a safety precaution
to ensure proper electrical grounding.
2.2 Signal cable connection
The monitor has an built - in signal cable with a male lS—pin mini
D-sub connector. Attach this connector to the female 15< 1024 63,98 60
VESA/SS 1024 X768 68.67 85
VESA/60 1600 X 1200 75.00 60
VESA/75 1280 X 1024 80.00 75
VESA/75 1600x1200 93.75 5
3.9 Plug and Play
This monitor features the VESA DDC (Display Data Channel)
standard which, when used with a DDC compatible video card, Will
simplify the monitor’s set up. With VESA DDC l/2B, When the
monitor is powered up, it will automatically notify a windows 95
host computer of its scanning frequencies, capabilities and
characteristics. Windows 95 will automatically recognize the
13
connection of the monitor and select the appropriate display
resolution.
3410 Power management
This monitor meets VESA DPMS (Display power management
signaling) standards, and complies with both the EPA’S energy star
requirements and Europe‘s TCO NUTEK‘S power management
requirement, The following is the description ofthe power indicator
for the power saving modes. A indication of the OSD window will
shown on the screen ofth’e monitor.
POWER
INDICATOR
GREEN
ORANGE
SUSPEND
OFF
POWER-SAVING ENABLE
THE MONITOR WILL SHUT
DOWN IN FEW SECONDS
The monitor automatically goes through the power management
steps when it is idle To release he monitor from the power saving
condition, press any key on the keyboard or mouse.
14
515V
4. chhnicallnformniion
4.1 Products Specifications
17 mi 19 INCH
15.70ind’m 17.90 iu‘rs
mXZZSmm 360x270mm
1131><&85'n‘hs 14.17X10.631ndxs
30-95me No. 795)
30—85li No“ 785)
30-98KHZ(Mixicl M998)
3045th(1»1<11:1 NO: 985)
50-150Hz SO-ISOHZ
1&1)le 1600x1200
1M ISOMHZ
420x406x408rrm 455 X446 X452 nm
165 KgCSGSLb)
190Kg(413u>)
19.61Q(43J Lb)
23.0 gags 1.13)
l’uwer
consumpxionrmu.)
120 Wans
150 Watts
1nput Signal
Display Analag 1npu|
Power Supply
Video : Analog ow” / 75 Ohms
Sync, : Separate sync.T‘1‘L level.
Unlimited Number ofcolors
(depends upon video card)
AC 100 - 240 volts 60/50 Hz
Environmental
Operating Temperalure
Humidity
Storage Temperature
Humidity
40°C
80%
60°C
90%
s“c m
2096 to
-20°C to
1096 to
NOTE : All technical specifications are subject to change without
notics.
15
9!
uouuom sq: psanamd no/( 919
am 31 swalqmd uouuuoa 01 s
Sup/mono] sq] ssn ‘Apadoxd 8
um 19129]; sq] ”ea ‘slsgsmd walqmd
uopnms nognb Jo; fluuooqsqqnmz
uguuoysd mu 5; Jouuom mo,( 31
Euuouqsalqnml g-y
Jomeuuoo [eufigs
91 ll
Cl 9
puncug anlg n
(oaq 80:1)1DS S!
“on s "At—y] punng p93
mi}; El 15913195
(300 HOd)V(IS Zl
Punmo 11
punmo 0!
uogzaauuoaoN 5
NH
maumfigssu uyd Jowouuoa pang-lg z'r

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:07:12 13:19:36
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:07:12 13:19:37+01:00
Page Count                      : 21

EXIF Metadata provided by EXIF.tools