Proxim Wireless 5054-LR 802.11a Wireless Tsunami 5054-R Radio User Manual Regulatory Compliance Professional Installation

Download:
Mirror Download [FCC.gov]
Document ID	682580
Application ID	A/QW/UxODweGgR10dP1Gnw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	191.32kB (2391537 bits)
Date Submitted	2006-07-18 00:00:00
Date Available	2006-07-18 00:00:00
Creation Date	2006-07-17 10:19:30
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2006-07-17 10:19:33
Document Title	Regulatory Compliance/Professional Installation
Document Creator	Acrobat PDFMaker 7.0 for Word
Document Author:	ADickson

Regulatory Compliance/Professional Installation
•
Safety Information (USA, Canada, & European Union)
This product has been evaluated to, and complies with, the Safety requirements of UL60950:2000, and
IEC60950:1999; the Standards for the Safety of Information Technology Equipment. When using this
device, basic safety precautions should always be followed to reduce the risk of fire, electric shock and
injury to persons, including the following:
•
Operate and install this product as described in this manual. This device must be installed and used
in strict accordance with the manufacturer's instructions.
•
This product is suitable for installation in air handling spaces (plenum).
•
Use only the AC/DC power supply adapter provided. For replacement, contact your local supplier or
distributor.
•
To avoid the risk of electric shock from lightning, do not use this product during an electrical storm.
•
Installation of this product must conform to local regulations and codes.
•
When using this product with an external antenna, see the installation documentation provided with
the antenna system.
•
No user serviceable parts; all repairs and service must be handled by a qualified service center.
Federal Communications Commission (FCC) Compliance
This device operates at 5.25 - 5.35 GHz, and 5.75 - 5.85 in compliance with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: 1) this device may not cause harmful interference,
and 2) this device must accept any interference received, including interference that may cause
undesired operation.
To comply with the FCC radio frequency exposure requirements, the following antenna installation and
device operating configurations must be satisfied:
•
Product models using external antennas require professional installation. The antennas used for
professional installation must be fixed-mounted on indoor/outdoor permanent structures with a
separation distance of at least 100 cm from all persons.
•
Antennas must not be co-located and must not operate in conjunction with any other antenna or
transmitter.
Modifications
Changes or modifications to this device that are not expressly approved by the manufacturer of the
product could void the user’s authority to operate the equipment.
Warnings
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection again
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
and correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and the receiver
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Adjusting Tx Output Power
Use the following formula in combination with the table of EIRP limits in US and EU countries to
calculate system transmit power (based on ERIP limits) of these countries:
Tx Power (dBm) = EIRP Limit (dBm) + FL (dB) – G (dB)
where:
Tx Power = Output power measured at the antenna input
EIRP Limit = EIRP limits specified below
FL = Feeder loss including loss of connectors
G = Antenna Gain
Frequency (GHz)
EIRP Limit (dBm)
Bandwidth (MHz)
USA
EU
5.25 - 5.35
—
30
20
5.725 - 5.850 (Point to
multipoint)
—
36
14
5.725-5.850 (Point to point)
—
no
14
Antenna Types and Maximum Gain
For devices using external antennas, professional installers should select only the antenna types listed
in the following table, with gain not exceeding the listed maximum gain for each type.
Antenna Type
Maximum Gain
Omni
10
Sector
17

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Company                         : Proxim Corp
Source Modified                 : D:20060717171646
Creator Tool                    : Acrobat PDFMaker 7.0 for Word
Modify Date                     : 2006:07:17 10:19:33-07:00
Create Date                     : 2006:07:17 10:19:30-07:00
Metadata Date                   : 2006:07:17 10:19:33-07:00
Document ID                     : uuid:0b1ba483-329a-43ee-b01f-848dafa5e39e
Instance ID                     : uuid:34aa1ebb-86ec-4056-b0c3-6c89d30ebd39
Version ID                      : 3
Format                          : application/pdf
Title                           : Regulatory Compliance/Professional Installation
Creator                         : ADickson
Subject                         : 
Headline                        : 
Page Count                      : 3
Page Layout                     : OneColumn
Author                          : ADickson

EXIF Metadata provided by EXIF.tools