Proxim Wireless AP9100 ORiNOCO AP-9100 User Manual ORiNOCO1 AccessPoints HardwareInstGuide

Proxim Wireless Corporation ORiNOCO AP-9100 ORiNOCO1 AccessPoints HardwareInstGuide

UserManual.wiki >

Proxim Wireless >

AP9100 User Manual >

Contents

User Manual

ORiNOCO® 802.11n & 802.11ac Access PointsHardware Installation GuideProducts Covered ORiNOCO® AP-800 ORiNOCO® AP-8000 ORiNOCO® AP-8100 ORiNOCO® AP-9100

ORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 3Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7About ORiNOCO® 802.11n & 802.11ac Access Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Salient Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Multiple-Input-Multiple-Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Hardware Overview and Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Device Operational Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9ORiNOCO® AP-800 and AP-8000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Power Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Reload. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Ethernet Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Serial Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Product Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Step 1: Install the Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Step 2: Mount the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Step 3: Plugging in the Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Step 4: Power On the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Step 5: View LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Step 6: Install Cable Security Cover (Optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16ORiNOCO® AP-8100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Front View of the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Reload. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Rear View of the Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Ethernet Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Power Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Keyhole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Kensington Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Cable Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Vent-Holes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Product Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

ORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 4Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Step 1: Plugging in the Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Step 2: Mount the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Step 3: Power On the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Step 4: View LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22ORiNOCO® AP-9100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Front View of the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Reload. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Rear View of the Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Ethernet Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Power Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Keyhole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Kensington Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Cable Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Vent-Holes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Product Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Step 1: Plugging in the Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Step 2: Mount the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Step 3: Power On the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Step 4: View LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293 Hardware Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30ORiNOCO® AP-800 and AP-8000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Antenna Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Omni Directional Antenna Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Range Extender Antenna (REA) Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34ORiNOCO® AP-8100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Antenna Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39ORiNOCO® AP-9100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Antenna Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43IEEE Spectral Mask Specifications: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45A Glossary and Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46B Statement of Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50C Technical Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52D FCC Safety & Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

PrefaceORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 5Preface About this GuideThis guide gives a jump start working knowledge on the ORiNOCO® 802.11n & 802.11ac Access Points and details on theirhardware specifications and installation procedures. Products CoveredListed below are the products covered in this guide: AudienceThe intended audience for this guide are the network administrators who installs and/or manages the device. PrerequisitesThe reader of this guide should have working knowledge of Wireless Networks, Local Area Networking (LAN) concepts,Network Access Infrastructures and Client-Server Applications. Documentation ConventionsIcon RepresentationThis chapter contains information on the following:•About this Guide•Products Covered•Audience•Prerequisites•Documentation Conventions•Related DocumentsProduct(s) Supported SKUsORiNOCO® AP-800 US, WD, JPORiNOCO® AP-8000 US, WD, JPORiNOCO® AP-8100 US, WD, JP, EUORiNOCO® AP-9100 US, WD, JP, EUName Image DescriptionNote A special instruction that draws attention of the user.

PrefaceORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 6 Related DocumentsFor more information, please refer to the following additional documents that are available at Proxim’s support sitehttp://support.proxim.com.•Quick Installation Guide (QIG) - A quick reference guide that provides essential information to install and configurethe device. •Software Management Guide - A guide that provides instructions on how to configure, manage and monitor thedevice by using Web Interface.•Reference Guide - A guide that provides instructions on how to configure, manage and monitor the device by usingCommand Line Interface.•Safety and Regulatory Compliance Guide - A guide that provides country specific safety and regulatory norms tobe followed while installing the devices. Important A note of significant importance that a user should be aware of.Caution A warning that cautions the user of a possible danger.: For regulatory information and latest product updates, visit our support site http://support.proxim.com.

ORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 71Introduction1.1 About ORiNOCO® 802.11n & 802.11ac Access PointsProxim’s ORiNOCO® 802.11n & 802.11ac Access Point family comprises the following products, that are designed to deliverflexible, scalable and reliable Data, Voice, and Video for small and medium Enterprise WLAN deployments. 1.2 Salient FeaturesAP-800/ AP-8000/ AP-8100/ AP-9100•Easy operation and installation•Provides wall mounting or ceiling option for flexible device installation.•Distributed WLANs with Centralized Management.•Management through a Web Interface (HTTP), Command Line Interface (CLI), Simple Network Management Protocol(SNMP) and ProximVision Network Management System (PVNMS)•Advanced 802.11i support for enterprise-grade securityThis chapter contains information on the following:•About ORiNOCO® 802.11n & 802.11ac Access Points•Salient Features•Multiple-Input-Multiple-OutputProduct(s) Description ImageORiNOCO® AP-800 An indoor 802.11n Access Point with dual-band, 3x3 MIMO(Multiple Input and Multiple Output) single radio which operateseither in 2.4 or 5 GHz. This connectorized unit comes with 3omni-directional antennas.ORiNOCO® AP-8000 An indoor 802.11n Access Point with dual-band, 3x3 MIMO(Multiple Input and Multiple Output) dual-radio, where oneoperates in 5GHz and other in 2.4GHz. This connectorized unitcomes with 6 omni-directional antennas, 3 per radio.ORiNOCO® AP-8100 An indoor 802.11n Access Point with 2x2 MIMO (Multiple Inputand Multiple Output) dual-radio, where one operates in 5GHzand other in 2.4GHz. This unit comes with 4 integratedantennas, 2 per radio.ORiNOCO® AP-9100 Proxim’s ORiNOCO® AP-9100 is an indoor 802.11ac +802.11b/g/n dual radio Access Point with dual-band (5 & 2.4GHz) and 3x3 MIMO (Multiple Input and Multiple Output). Thisintegrated unit comes with built-in 6 omni-directional antennas,3 per radio.

IntroductionORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 8AP-800/ AP-8000/ AP-8100•Industry-leading throughput in 802.11b/g/n and 802.11a/n modes in the 2.4 GHz and 5 GHz respectively.•Highest throughput with single radio rates of 300 Mbps and dual radio rates of 600 Mbps.•Tested against Wi-Fi Alliance interoperability test suite and certified as interoperable with Wi-Fi client access product.AP-9100•Industry-leading throughput in 802.11b/g/n and 802.11ac modes in the 2.4 GHz and 5 GHz respectively.•Highest throughput with the radio rates of 1300 Mbps for 802.11ac Radio and 450 Mbps for 802.11n Radio.1.3 Multiple-Input-Multiple-OutputORiNOCO® Access Point devices support Multiple-Input-Multiple-Output (MIMO) antenna technology that uses multipleantennas at both the transmitting end and receiving end to improve communication performance. The underlying technologyof these access point radio(s) are based on a combination of MIMO and OFDM (Orthogonal Frequency Division Multiplexing).MIMO-OFDM combination radios solve interference, fading and multipath problems. Having multiple receivers at thereceiving end, increases the amount of received power and also reduces multipath problems by combining the receivedsignals for each frequency component separately. Hence, MIMO significantly improves the overall gain. MIMO also uses Spatial multiplexing transmission technique to transmit independent and separately encoded data signalsfrom each of the multiple transmit antennas while reusing or multiplexing in the space dimension. These independent datasignals are called Spatial streams. The transmitting end of the device uses multiple radio Tx chains and signal paths tosimultaneously transmit different data streams, whereas the receiving end combines the Rx signals resulting in higherthroughput. By increasing the number of receiving and transmitting antennas, the throughput of the channel increases linearly resulting inhigh spectral efficiency.

ORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 92Hardware Overview and Installation2.1 Device Operational Modes : The operational mode ‘g/n’ is backward compatible to mode ‘b’.This chapter covers the hardware overview and installation procedures of the following products:•ORiNOCO® AP-800 and AP-8000—Hardware Overview—System Requirements—Product Package—Installation Procedure•ORiNOCO® AP-8100—Front View of the Device—Rear View of the Device—System Requirements—Product Package—Installation Procedure•ORiNOCO® AP-9100—Front View of the Device—Rear View of the Device—System Requirements—Product Package—Installation ProcedureDevice Type Operational Mode (With Supported Frequency Band)Radio 1 Radio 2AP-800 802.11b/g/n (2.4 GHz) Not ApplicableAP-8000 802.11a/n (5 GHz) 802.11b/g/n (2.4 GHz)AP-8100 802.11a/n (5 GHz) 802.11b/g/n (2.4 GHz)AP-9100 802.11a/n/ac (5 GHz) 802.11b/g/n (2.4 GHz): • All the interface (radio) 2 parameters discussed in this chapter are applicable only to a dual-radio device.• For a quick reference on how to install and mount the device, please refer to the ORiNOCO® AP-800, AP-8000, AP-8100 and AP-9100 Quick Installation Guides respectively.

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 102.2 ORiNOCO® AP-800 and AP-80002.2.1 Hardware OverviewFigure 2-1 Device OverviewFollowing sections give you hardware overview of AP-800 and AP-8000.2.2.1.1 LED IndicatorsTabulated below are the four LEDs, that are available on the top panel of the device:2.2.1.2 AntennasThe AP device comes with 3x3 MIMO omni-directional antennas that are easy to install. Proxim also recommends you anoptional accessory - Range Extender Antenna (REA) with a 3 x RP SMA plug, that can be easily connected to the device.See Installation Procedure, for details on installation of antennas.– AP-800 comes with three omni directional antennas.– AP-8000 comes with six omni directional antennas, three per radio.LED Symbol DescriptionPower LED This LED indicates whether the device is switched on/off.Ethernet LED This LED signals the traffic on the wired ethernet LAN.Wireless Interface (Radio) 1 LEDThis LED provides the status of the traffic on wireless interface (radio) 1. Refer Device Operational Modes.Wireless Interface (Radio) 2 LEDThis LED provides the status of the traffic on wireless interface (radio) 2.Refer Device Operational Modes.ORiNOCO® AP-800 ORiNOCO® AP-8000

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 122.2.2 System RequirementsFollowing are the minimum system requirements to use the device:1. Any 802.11 compliant wireless adapter.2. A computer that is connected to the same IP network as the AP and has one of the following installed:— Web Browser—Telnet— RS-232 Serial Port— MIB Browser— Ethernet NIC Card3. Ethernet switch, cross-over or straight Ethernet cable.4. A 5V DC Power Adapter or a Power over Ethernet (PoE) Adapter2.2.3 Product PackageEach shipment includes the items listed in the following table. Please verify that you have received all the parts in theshipment, prior to the installation.What’s in the Kit ImageORiNOCO® AP-800 or AP-8000Omni-directional Antennas with reverse SMA connectors. •AP-800: Quantity - 3•AP-8000: Quantity - 6Cable Security CoverMounting KitQuick Installation Guide (QIG)OR

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 132.2.3.1 Optional AccessoriesTabulated below are the recommended optional accessories, that are supplied on request from Proxim Wireless Corporation.2.2.4 Installation ProcedurePerform the following steps to install and mount the device.2.2.4.1 Step 1: Install the AntennasThe omni-directional antennas supplied with the product do not require any professional installation. Only, the regularoutdoor antennas connected via a pigtail conversion cable, offering a standard connector type for antenna connection,require a professional installation.: Optionally, you can use the Range Extended Antenna (REA), which has 3 x RP SMA plug, that can be easily connected to the device.Perform the following steps to assemble the antennas:1. Hand-tighten the antennas clockwise, onto the external connectors of the device until they are attached firmly.2. Position the antennas close to the horizontal surface (ceiling or wall), so as to get the maximum signal coverage of the omni-directional antenna.2.2.4.2 Step 2: Mount the DeviceConsider the following precautions, before mounting the device:•The device must be protected from exposure, and the environmental conditions must be within those specified in theproduct datasheet, that can be found at http://support.proxim.com.•Ensure to use a +5V/3.5 A power adapter, to power on the device.: • Note that the device is build with fire retardant ATX200 resin and can be installed in the plenum. In an office building, plenum is the space between the structural ceiling and the tile ceiling that is provided to help air circulate. Many companies also use the plenum to house communication equipment and cables. These products and cables must comply with certain safety requirements, such as Underwriter Labs (UL) and Standard 2043: “Standards for Fire Test for Heat and Visible Smoke Release for Direct Products and Their Accessories installed in Air-Handling Spaces”.• When installed in a plenum, the device must use PoE.Accessory Image110-220V worldwide Power AdapterRange Extender Antenna (REA)Gigabit Ethernet PoE

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 14Conduct a site survey to determine the best location for the device. You can either mount the device to a wall or mount it tothe T-bar ceiling, as follows:Wall-Mounting:To mount the device to a wall, follow the following steps:1. If the device is powered on, unplug all the power cables.2. Place the mounting plate on the wall with the embossed inverted letter “L” facing your right, as shown below:Figure 2-3 Mounting Plate3. Fasten the mounting plate by using a pair of plastic anchors and screws provided with the product package.4. Hold the device with its rear panel facing up. Next, align two keyholes on the device with the two holders on the mounting plate. 5. Carefully slide the device down until the holders on the mounting plate fasten securely onto the keyholes of the device.Figure 2-4 Mount the DeviceCeiling Mounting:To mount the device to ceiling, follow the following steps:1. If the device is powered on, unplug all the power cables.2. Place the mounting plate onto the ceiling with the embossed inverted letter “L” facing your right. Refer Mounting Plate3. Fasten the mounting plate by using a pair of plastic anchors and screws provided with the product package.4. Hold the device with its rear panel facing front. Next, align two keyholes on the device with the two holders on the mounting plate. 5. Carefully slide the device towards rear side until the holders on the mounting plate fasten securely onto the keyholes of the device.

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 152.2.4.3 Step 3: Plugging in the CablesCabling with Power Adapter (Not supplied with the product package)To plug in the cables by using a 5V DC power adapter:•Connect one end of the CAT5e/CAT6 Ethernet cable (not supplied with the product) to the device’s ethernet port andthe other end to a PC.•Plug the barrel of the power cable into the device’s power socket, only after the device installation is complete.Cabling with Gigabit PoE (Not supplied with the product package)To use Power over Ethernet (PoE), we recommend you to use our Gigabit Ethernet PoE adapter ORiNOCO 1-Port ActiveEthernet DC Injector (See Optional Accessories) and follow the following guidelines:•Connect one end of the ethernet cable to the Data In port of the DC Injector and the other end to a PC.•Connect one end of the second ethernet cable (not supplied with the product) to the device’s ethernet port, and theother end to the Data & Power Out Port of the DC Injector, only after the device installation is complete.: PoE should be installed only in an indoor network, maintaining a controlled temperature.Serial ConnectionOptionally, you can connect a nine-pin, male-to-female serial cable to the console port/DB9 connector of the device fordebugging and management.: • Use a straight-through ethernet cable, if you intend to connect the device to a switch, hub, or patch panel.• Use a cross-over ethernet cable or adapter if you intend to connect the device to a single computer.• The pin6 on RJ11 connector is used for power consumption and debugging. This connects internally to the 12VDC.• If power is drawn from this input pin, then the radio might malfunction.2.2.4.4 Step 4: Power On the DeviceTo power on the device, plug in the power cord into a power outlet. There is no ON/OFF switch on the device. To disconnectpower:•Unplug the RJ45 connector from the Data & Power Out port on the DC injector, if using the Gigabit Ethernet PoE.•Unplug the power cable from the power socket of the device, if using power adapter.2.2.4.5 Step 5: View LEDsWhen the device is powered on, it performs startup diagnostics. When startup is complete, the LEDs show the operationalstate of the device. Tabulated below is the behavior of the four LEDs on the device:LED Behavior ColorPower LED Glows green when the device is switched ON.Ethernet LED Glows red when the ethernet interface is connected to a 100 Mbpslink.Glows green when the ethernet interface is connected to a 1000 Mbpslink.

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 16: The LEDs glow ‘orange’ when the device initializes.2.2.4.6 Step 6: Install Cable Security Cover (Optional)When the RS-232 cable is not connected, we recommend you to install a cable security cover to prevent the power socket,LAN ports, reset and reload buttons from getting tampered. Follow the following procedure to install the cable security cover:1. Open the split end of the security cover just enough to slide the power cable (if the Gigabit Ethernet PoE is not used) and the CAT6 ethernet cable through the opening until they fit inside the straight clamping portion of the cover.2. Exercise care, as you slide the cable(s) so that you do not accidently break the cover.3. Slide the hinging end of the security cover and insert the latch into the hole at the rear end of the device. 4. Insert the two screws into the screw holes near serial port and fasten the security cover on the device.2.3 ORiNOCO® AP-81002.3.1 Front View of the DeviceFigure 2-5 Front View of the AP-8100The front panel of the device contains the following components:2.3.1.1 LED IndicatorsTabulated below are the four LEDs, that are available on the front panel of the device:Wireless Interface (Radio) 1 LED• The Wireless LEDs glow steady green in operational status.• Blinks green, if wireless traffic is being transmitted or received.Wireless Interface (Radio) 2 LEDLED Symbol DescriptionPower LED This LED indicates whether the device is switched ON/OFF.Ethernet LED This LED indicates the status of the traffic over the wired ethernetLAN.

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 172.3.1.2 ReloadReload button helps to restore the device to factory default configuration, when:– The device cannot be accessed through web interface or command line interface.– The device does not initialize.– The password is lost.To avoid tampering, you can lock the reload button on the device and disable the reload functionality. For more details, referto the Reload feature and Recovery Procedures illustrated in ORiNOCO® 802.11n Access Points - Software ManagementGuide.2.3.2 Rear View of the DeviceFigure 2-6 Rear View of the DeviceThe rear panel of the device contains the following components:2.3.2.1 Ethernet PortThe Ethernet port of the device allows the user to connect to the LAN by using CAT5e / CAT6 ethernet cable.2.3.2.2 Power SocketThis socket connects to the 12 VDC power adapter.2.3.2.3 KeyholeA provision to fix the device onto the mounting plate.2.3.2.4 Kensington LockA security slot to lock the device.2.4G (Wireless Interface 2) LEDThis LED indicates the status of the traffic over the wireless interface(radio) 2. Refer Device Operational Modes.5G (Wireless Interface 1) LEDThis LED indicates the status of the traffic over the wireless interface(radio) 1. Refer Device Operational Modes.

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 182.3.2.5 Cable RouteA slot for the CAT5e / CAT6 ethernet cable and the power cable to rest securely.2.3.2.6 Vent-HolesVentilation holes on the device allow heat dissipation.2.3.3 System RequirementsFollowing are the minimum system requirements to use the device:1. Any 802.11 compliant wireless adapter.2. A computer that is connected to the same IP network as the AP and has one of the following installed:— Web Browser—Telnet— MIB Browser— Ethernet NIC Card3. Ethernet switch, cross-over or straight Ethernet cable.4. A 12V DC Power Adapter or a Power over Ethernet (PoE) Adapter.2.3.4 Product PackageEach shipment includes the items listed in the following table. Please verify that you have received all the parts in theshipment, prior to the installation.What’s in the Kit ImageORiNOCO® AP-8100 Power adapter with Country specificPower Plug(s)Mounting KitSKU Power Plug(s)WD US, UK, EUUS USJP USEU UK, EU

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 192.3.4.1 Optional AccessoriesTabulated below are the recommended optional accessories, that are supplied on request from Proxim Wireless Corporation.2.3.5 Installation ProcedurePerform the following steps to mount and install the device.2.3.5.1 Step 1: Plugging in the CablesCabling with Power Adapter (Supplied with the product package)To plug in the cables by using a 12V DC power adapter:•Connect one end of the CAT5E/CAT6 Ethernet cable to the device’s ethernet port and the other end to a PC.•Plug the barrel of the power cable into the device’s power socket, only after the device installation is complete.: Use a cable-tie to ensure that the power cable stays intact with the device power socket.Cabling with Gigabit PoE (Not supplied with the product package)To use Power over Ethernet (PoE), we recommend you to use our Gigabit Ethernet PoE adapter ORiNOCO 1-Port ActiveEthernet DC Injector (See Optional Accessories) and follow the following guidelines:•Connect one end of the ethernet cable to the Data In port of the DC Injector and the other end to a PC.•Connect one end of the second ethernet cable to the device’s ethernet port, and the other end to the Data & PowerOut Port of the DC Injector, only after the device installation is complete.: PoE should be installed only in an indoor network, maintaining a controlled temperature.Quick Installation Guide (QIG)Accessory Part NumberImage DescriptionPoE Adapter (US/CAN/JP Power Cord)76282 PoE module helps you to power ON the device via ethernet cabling.PoE Adapter (EU Power Cord)76288PoE Adapter (UK Power Cord)76287What’s in the Kit Image

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 202.3.5.2 Step 2: Mount the DeviceConsider the following precautions, before mounting the device:•The device must be protected from exposure, and the environmental conditions must be within those specified in theproduct datasheet that can be found at http://support.proxim.com.•Ensure to use a +12V/1.25 A power adapter, to power on the device.•Ensure that there is no power supply, until the device installation is complete.: • Note that the device is build with fire retardant ATX200 resin and can be installed in the plenum. In an office building, plenum is the space between the structural ceiling and the tile ceiling that is provided to help air circulate. Many companies also use the plenum to house communication equipment and cables. These products and cables must comply with certain safety requirements, such as Underwriter Labs (UL) and Standard 2043: “Standards for Fire Test for Heat and Visible Smoke Release for Direct Products and Their Accessories installed in Air-Handling Spaces”.• When installed in a plenum, the device must use PoE.Conduct a site survey to determine the best location for the device. You can either mount the device to a wall or mount it tothe T-bar ceiling, as follows:Wall-Mounting:To mount the device to a wall:1. Place the mounting plate on the wall such that the embossed letter ‘L’ is at the top-center position and the vent-holes are facing your left hand side.Figure 2-7 Mounting Plate2. Fasten the mounting plate by using a pair of plastic anchors and screws provided with the product package.3. Hold the device in the upright position (with ‘Reload’ on top and the ‘LEDs’ at the bottom), such that the vent-holes on the device and the vent-holes on the mounting plate rest on each other.4. Align the two keyholes on the device with the two holders on the mounting plate.5. Carefully, slide the device towards your right hand side, until the holders on the mounting plate fasten securely onto the keyholes of the device.

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 21Figure 2-8 Wall MountingCeiling Mounting:1. Place the mounting plate on the T-bar ceiling such that the embossed letter ‘L’ is at the top-center position and the vent-holes are facing your left hand side.2. Fasten the mounting plate by using a pair of plastic anchors and screws provided with the product package.3. Hold the device with its rear panel facing the mounting plate, such that the vent-holes on the device and the vent-holes on the mounting plate rest on each other. 4. Align the two keyholes on the device with the two holders on the mounting plate.5. Carefully, slide the device towards your right hand side, until the holders on the mounting plate fasten securely onto the keyholes of the device.Figure 2-9 Ceiling MountingMounting AP-8100 to AP-800/8000 mounting plate (Optional)In case, you are mounting AP-8100 to an already installed AP-800/8000 Mounting Plate (P/N 67439), then follow thefollowing steps.Wall Mounting: 1. Hold the device such that the ‘Reload’ is towards your right hand side and the ‘LEDs’ towards left hand side.2. Align the two keyholes on the device with the two holders on the mounting plate.3. Carefully, slide down the device until the holders on the mounting plate fasten securely onto the keyholes of the device.

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 22Ceiling Mounting:1. Hold the device such that the rear panel of the device is facing the mounting plate, with ‘Reload’ towards your right hand side and ‘LEDs’ towards left hand side.2. Align the two keyholes on the device with the two holders on the mounting plate.3. Carefully, slide the device backwards until the holders on the mounting plate fasten securely onto the keyholes of the device.: Ensure that the mounting plate is fixed in the similar fashion, as described in AP-800/AP-8000 mounting procedures (See Installation Procedure).2.3.5.3 Step 3: Power On the DeviceTo power on the device, plug in the power cord into a power outlet. There is no ON/OFF switch on the device. To disconnectpower:•Unplug the power cable from the power socket of the device, if using power adapter.•Unplug the RJ45 connector from the Data & Power Out port on the DC injector, if using the Gigabit Ethernet PoE.2.3.5.4 Step 4: View LEDsWhen the device is powered on, it performs startup diagnostics. When startup is complete, the LEDs show the operationalstate of the device. Tabulated below is the behavior of the four LEDs on the device.: When the Reload button is pressed, the Power LED glows amber.LED Symbol Behavior ColorPower LEDGlows green when the AP-8100 device is switched ON.• Glows green when the AP-8100 device is connected to a 1 Gbps link.• Blinks green when the AP-8100 device traffic is being transmitted or received on the 1 Gbps link.• Glows amber when the AP-8100 device is connected to a 100 Mbps link.• Blinks amber when the AP-8100 device traffic is being transmitted or received on the 100 Mbps link.• Glows red when the AP-8100 device is connected to a 10 Mbps link.• Blinks red when the AP-8100 device traffic is being transmitted or received on the 10 Mbps link.2.4 GHz LED• Glows green when the AP-8100 device wireless interface 2 is in operational state.• Blinks green when the AP-8100 device wireless traffic is being transmitted or received.5 GHz LED• Glows green when the AP-8100 device wireless interface 1 is in operational state.• Blinks green when the AP-8100 device wireless traffic is being transmitted or received.Ethernet LED

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 232.4 ORiNOCO® AP-91002.4.1 Front View of the DeviceFigure 2-10 Front View of the AP-9100The front panel of the device contains the following components:2.4.1.1 LED IndicatorsTabulated below are the four LEDs, that are available on the front panel of the device:2.4.1.2 ReloadReload button helps to restore the device to factory default configuration, when:– The device cannot be accessed through web interface or command line interface.– The device does not initialize.– The password is lost.To avoid tampering, you can lock the reload button on the device and disable the reload functionality. For more details, referto the Reload feature and Recovery Procedures illustrated in ORiNOCO® 802.11n & 802.11ac Access Points - SoftwareManagement Guide.LED Symbol DescriptionEthernet LED This LED indicates the status of the traffic over the wired ethernetLAN.5G (Wireless Interface 1) LEDThis LED indicates the status of the traffic over the wireless interface(radio) 1. Refer Device Operational Modes.2.4G (Wireless Interface 2) LEDThis LED indicates the status of the traffic over the wireless interface(radio) 2. Refer Device Operational Modes.Power LED This LED indicates whether the device is switched ON/OFF.

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 242.4.2 Rear View of the DeviceFigure 2-11 Rear View of the DeviceThe rear panel of the device contains the following components:2.4.2.1 Ethernet PortThe Ethernet port of the device allows the user to connect to the LAN by using CAT5e / CAT6 ethernet cable.2.4.2.2 Power SocketThis socket connects to the 12 VDC power adapter.2.4.2.3 KeyholeA provision to fix the device onto the mounting plate.2.4.2.4 Kensington LockA security slot to lock the device.2.4.2.5 Cable RouteA slot for the CAT5e / CAT6 ethernet cable and the power cable to rest securely.2.4.2.6 Vent-HolesVentilation holes on the device allow heat dissipation.2.4.3 System RequirementsFollowing are the minimum system requirements to use the device:1. Any 802.11 compliant wireless adapter.2. A computer that is connected to the same IP network as the AP and has one of the following installed:— Web Browser—Telnet— MIB Browser— Ethernet NIC Card3. Ethernet switch, cross-over or straight Ethernet cable.

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 254. A 12V DC Power Adapter or a Power over Ethernet (PoE) Adapter.2.4.4 Product PackageEach shipment includes the items listed in the following table. Please verify that you have received all the parts in theshipment, prior to the installation.What’s in the Kit ImageORiNOCO® AP-9100Power adapter with Country specificPower Plug(s)Mounting KitQuick Installation Guide (QIG)SKU Power Plug(s)WD US, UK, EUUS USJP USEU UK, EU

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 262.4.4.1 Optional AccessoriesTabulated below are the recommended optional accessories, that are supplied on request from Proxim Wireless Corporation.2.4.5 Installation ProcedurePerform the following steps to mount and install the device.2.4.5.1 Step 1: Plugging in the CablesCabling with Power Adapter (Supplied with the product package)To plug in the cables by using a 12V DC power adapter:•Connect one end of the CAT5E/CAT6 Ethernet cable to the device’s ethernet port and the other end to a PC.•Plug the barrel of the power cable into the device’s power socket, only after the device installation is complete.: Use a cable-tie to ensure that the power cable stays intact with the device power socket.Cabling with Gigabit PoE (Not supplied with the product package)To use Power over Ethernet (PoE), we recommend you to use our Gigabit Ethernet PoE adapter ORiNOCO 1-Port ActiveEthernet DC Injector (See Optional Accessories) and follow the following guidelines:•Connect one end of the ethernet cable to the Data In port of the DC Injector and the other end to a PC.•Connect one end of the second ethernet cable to the device’s ethernet port, and the other end to the Data & PowerOut Port of the DC Injector, only after the device installation is complete.: PoE should be installed only in an indoor network, maintaining a controlled temperature.2.4.5.2 Step 2: Mount the DeviceConsider the following precautions, before mounting the device:•The device must be protected from exposure, and the environmental conditions must be within those specified in theproduct datasheet that can be found at http://support.proxim.com.•Ensure to use a +12V/1.25 A power adapter, to power on the device.•Ensure that there is no power supply, until the device installation is complete.Accessory Part NumberImage DescriptionPoE Adapter (US/CAN/JP Power Cord)76282 PoE module helps you to power ON the device via ethernet cabling.PoE Adapter (EU Power Cord)76288PoE Adapter (UK Power Cord)76287

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 27: • Note that the device is build with fire retardant FR3020 material and can be installed in the plenum. In an office building, plenum is the space between the structural ceiling and the tile ceiling that is provided to help air circulate. Many companies also use the plenum to house communication equipment and cables. These products and cables must comply with certain safety requirements, such as Underwriter Labs (UL) and Standard 2043: “Standards for Fire Test for Heat and Visible Smoke Release for Direct Products and Their Accessories installed in Air-Handling Spaces”.• When installed in a plenum, the device must use PoE.Conduct a site survey to determine the best location for the device. You can either mount the device to a wall or mount it tothe T-bar ceiling, as follows:Wall-Mounting:To mount the device to a wall:1. Place the mounting plate on the wall such that the embossed letter ‘L’ is at the top-center position and the vent-holes are facing your left hand side.Figure 2-12 Mounting Plate2. Fasten the mounting plate by using a pair of plastic anchors and screws provided with the product package.3. Hold the device in the upright position (with ‘Reload’ on top and the ‘LEDs’ at the bottom), such that the vent-holes on the device and the vent-holes on the mounting plate rest on each other.4. Align the two keyholes on the device with the two holders on the mounting plate.5. Carefully, slide the device towards your right hand side, until the holders on the mounting plate fasten securely onto the keyholes of the device.Figure 2-13 Wall Mounting

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 28Ceiling Mounting:1. Place the mounting plate on the T-bar ceiling such that the embossed letter ‘L’ is at the top-center position and the vent-holes are facing your left hand side.2. Fasten the mounting plate by using a pair of plastic anchors and screws provided with the product package.3. Hold the device with its rear panel facing the mounting plate, such that the vent-holes on the device and the vent-holes on the mounting plate rest on each other. 4. Align the two keyholes on the device with the two holders on the mounting plate.5. Carefully, slide the device towards your right hand side, until the holders on the mounting plate fasten securely onto the keyholes of the device.Figure 2-14 Ceiling MountingMounting AP- 9100 to AP-800/AP-8000 mounting plate (Optional)In case, you are mounting AP-9100 to an already installed AP-800/AP-8000 Mounting Plate (P/N 67439), then follow thefollowing steps.Wall Mounting: 1. Hold the device such that the ‘Reload’ is towards your right hand side and the ‘LEDs’ towards left hand side.2. Align the two keyholes on the device with the two holders on the mounting plate.3. Carefully, slide down the device until the holders on the mounting plate fasten securely onto the keyholes of the device.Ceiling Mounting:1. Hold the device such that the rear panel of the device is facing the mounting plate, with ‘Reload’ towards your right hand side and ‘LEDs’ towards left hand side.2. Align the two keyholes on the device with the two holders on the mounting plate.3. Carefully, slide the device backwards until the holders on the mounting plate fasten securely onto the keyholes of the device.: Ensure that the mounting plate is fixed in the similar fashion, as described in AP-800/AP-8000 mounting procedures (See Installation Procedure).2.4.5.3 Step 3: Power On the DeviceTo power on the device, plug in the power cord into a power outlet. There is no ON/OFF switch on the device. To disconnectpower:•Unplug the power cable from the power socket of the device, if using power adapter.

Hardware Overview and InstallationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 29•Unplug the RJ45 connector from the Data & Power Out port on the DC injector, if using the Gigabit Ethernet PoE.2.4.5.4 Step 4: View LEDsWhen the device is powered on, it performs startup diagnostics. When startup is complete, the LEDs show the operationalstate of the device. Tabulated below is the behavior of the four LEDs on the device.: When the Reload button is pressed, the Power LED blinks in green.LED Symbol Behavior Color• Glows green when the AP-9100 device is connected to a 1 Gbps link.• Blinks green when the AP-9100 device traffic is being transmitted or received on the 1 Gbps link.• Glows amber when the AP-9100 device is connected to a 100 Mbps link.• Blinks amber when the AP-9100 device traffic is being transmitted or received on the 100 Mbps link.• Glows yellow when the AP-9100 device is connected to a 10 Mbps link.• Blinks yellow when the AP-9100 device traffic is being transmitted or received on the 10 Mbps link.5 GHz LED• Glows green when the AP-9100 device wireless interface 1 is in operational state.• Blinks green when the AP-9100 device wireless traffic is being transmitted or received.2.4 GHz LED• Glows green when the AP-9100 device wireless interface 2 is in operational state.• Blinks green when the AP-9100 device wireless traffic is being transmitted or received.Power LED• Glows green when the AP-9100 device is switched ON.Ethernet LED

ORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 303Hardware SpecificationsThis chapter covers the hardware specifications of the following products:•ORiNOCO® AP-800 and AP-8000•ORiNOCO® AP-8100•ORiNOCO® AP-9100

Hardware SpecificationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 313.1 ORiNOCO® AP-800 and AP-8000Category SpecificationRadio Module Single Radio Access Point (AP-800) / Dual Radio Access Point (AP-8000)3x3 MIMO per radio. Refer Device Operational Modes.Wireless Protocol 802.11a/n802.11a802.11b/g/n802.11gFrequency 5.150 - 5.850 GHz*2.4 - 2.483 GHz** Subject to Individual Country RegulationsChannel bandwidth 20MHz and 40MHz for 802.11n20MHz for 802.11a/b/gModulation •MCS0 - MCS15 for 802.11n (6.5 Mbps -300 Mbps)•BPSK, QPSK, 16-QAM and 64-QAM for 802.11a and 802.11g (6 Mbps - 54 Mbps)•DSSS for 802.11b (1 Mbps -11 Mbps)Device Interface Ethernet: Auto-sensing 10/100/1000BASE-T EthernetAntenna Connector: 3 RP-SMA connectors for AP-800 6 RP-SMA connectors for AP-8000LED Indicators Refer Step 5: View LEDsAntennas 3 Single-Band (AP-800) / 6 Dual-Band (AP-8000) Omni-Antennas and reverse SMA connectorwith 3 dBi gain.Network Architecture Type InfrastructureTransmit Power* Combined Tx Power valuesOperational ModesTransmit Power* (dBm)20 MHz 40 MHz802.11b 19 -802.11a/g 17 - 802.11na/ng 16 14

Hardware SpecificationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 32Receive Sensitivity*MCS refers to Modulation Coding Scheme.Local Configuration SupportRS-232 Serial port, DB9 FemaleRemote ConfigurationSupportTelnet and SSH, Web GUI (http) and SSL (https), TFTPSNMP v1, v2c and v3SNMP trap and SyslogPVES (ProximVision ES Network Management Systems)Message Authentication 802.11i AES message authentication with 128 bit keysTKIP with 128 bit Michael Message Integrity CheckIntrusion detection Detect MIC intrusion attacksDimensions (L x W x H)11.1 x 6.85 x 1.89 in. (282 x 174 x 48 mm) : These dimensions exclude the antennas.Weight AP-800 - 0.7 Kgs (1.54 lbs) AP-8000 - 0.75 Kgs (1.65 lbs)Environmental Operating Temperatures:0 to 55ºC 5 to 95 percent (non-condensing)Storage Temperature:-20º to 75ºCMTBF 43,800 hrsWarranty One year parts/labor11b 11a/g 11nData Rate (Mbps)Receive Sensitivity (2.4-5Ghz)Data Rate (Mbps)Receive Sensitivity (2.4-5Ghz)Data Rate (MCS*)Receive Sensitivity (2.4-5Ghz)1 -94 6 -96 MCS 0 -9011 -91 36 -87 MCS 8 -91- - 48 -83 MCS 10 -83- - 54 -82 MCS 15 -72

Hardware SpecificationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 333.1.1 Antenna Specifications•Omni Directional Antenna (Supplied with the Product)•Range Extender Antenna (REA) (Not Supplied with the product)3.1.1.1 Omni Directional Antenna SpecificationsFeature Electrical SpecificationsFrequency Range 2400 MHz - 2500 MHz 4900 MHz – 5875 MHzPeak Gain 2.5 dBi 5 dBiAverage Gain 1.5 dBi 3 dBiVSWR 2.0 : 1 MaxPolarization Linear, VerticalHPBW/Horizontal 360o360oHPBW/Vertical 50o25oPower Handling 2W (cw)Impedence 50 OhmsConnector RP SMA PlugFeature Environmental and Mechanical SpecificationTemperature -10°C to +55°CHumidity 95% @55°CRadome color WhiteRadome material ABS, UV resistantWeight 21 gDimensions 19 x 39 x 127 mmPower Handling 2W (cw)

Hardware SpecificationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 343.1.1.2 Range Extender Antenna (REA) SpecificationsRadio PatternsFeature Electrical SpecificationsFrequency Range 2400 MHz - 2500 MHz 4900 MHz – 5875 MHzPeak Gain 3 dBi 6 dBiVSWR 2.0 : 1 Max 2.5 : 1 MaxPolarization Linear, VerticalHPBW/Horizontal 360o360oFeature Environmental and Mechanical Specification

Hardware SpecificationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 35HPBW/Vertical 35o - 50o17o - 27oPower Handling 2W (cw)Impedence 50 OhmsCable ULA100-3F, White, 1.5 mConnector RP SMA Plug x 3 (Quick Connector)Lightning Protection N/A* Exclusive of cable loss 2.5 dB @ 2.4 GHz and 5 dB @ 5.5 GHzFeature Environmental and Mechanical SpecificationTemperature -10°C to +55°CHumidity 95% @55°CRadome color WhiteRadome material ABS, UV resistantWeight 0.2 gDimensions 76.6 x 185 mmMounting Kit Desktop Mount and Ceiling mountFeature Electrical Specifications

Hardware SpecificationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 36Radio PatternsFeature Environmental and Mechanical Specification

Hardware SpecificationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 373.2 ORiNOCO® AP-8100 Category SpecificationPower RequirementsPower Adapter: 12V/1.25APower over Ethernet (PoE) (optional): 48V / Any 802.3af compliant Gigabit PoERadio Module Dual Radio Access Point, 2x2 MIMO per radioRadio1: IEEE 802.11a/nRadio2: IEEE 802.11b/g/nRefer Device Operational Modes.Wireless Protocol802.11a/n802.11a802.11g 802.11b/g/nFrequency 5.150 - 5.850 GHz*2.4 - 2.483 GHz* Subject to Individual Country RegulationsChannel bandwidth20MHz and 40MHz for 802.11n20MHz for 802.11a/b/gModulation •BPSK, QPSK, 16-QAM and 64-QAM:– With data rates of 6.5 Mbps -300 Mbps for 802.11n– With data rates of 6 Mbps - 54 Mbps for 802.11a and 802.11g•DSSS, CCK: With data rates of 1 Mbps -11 Mbps for 802.11bDevice Interface Ethernet: Auto-sensing 10/100/1000BASE-T EthernetLED Indicators Refer Step 4: View LEDsAntennas 4 Modular High Efficiency built-in PIFA Antennas with a peak gain of:– 3dBi for 2.4 GHz frequency.– 4dBi for 5 GHz frequency.Network Architecture TypeInfrastructure: The operational mode ‘g/n’ is backward compatible to mode ‘b’.

Hardware SpecificationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 38Transmit Power* Combined Tx Power values* MCS refers to Modulation Coding Scheme.Receive Sensitivity* MCS refers to Modulation Coding Scheme.Remote ConfigurationSupportTelnet and SSH, Web GUI (http) and SSL (https), TFTPSNMP v1, v2c and v3SNMP trap and SyslogPVES (ProximVision ES Network Management Systems)Message Authentication802.11i AES message authentication with 128 bit keysTKIP with 128 bit Michael Message Integrity CheckIntrusion detectionDetect MIC intrusion attacksDimensions (L x W x H)6.69 x 6.69 x 1.74 in. (170 x 170 x 44.1 mm)Weight 0.340 kg (0.75 lbs)Environmental Operating Temperatures:0 to 45ºC5 to 95 percent (non-condensing)Storage Temperature:- 40º to 70ºCMTBF >100,000 hrsWarranty One year parts/laborAP-810011b 11a/g 11nData Rates(Mbps)Transmission Power*(dBm)Data Rates (Mbps)Transmission Power*(dBm)Data Rate (MCS*)Transmission Power*(dBm)1 to 11 20 6 to 48 20 MCS (0 to 5) 20MCS 6 1954 20 MCS 7 17AP-810011b 11a/g 11nData Rate (Mbps)Receive Sensitivity (2.4-5Ghz)Data Rate (Mbps)Receive Sensitivity (2.4-5Ghz)Data Rate (MCS*)Receive Sensitivity (2.4/5Ghz)20 MHz 40 MHz1-93 6-90 MCS 0 -87 -8611 -90 54 -75 MCS 7 -70 -66

Hardware SpecificationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 393.2.1 Antenna SpecificationsFeature SpecificationFrequency Range 2.4 GHz - 2.5 GHz 5.1 GHz – 5.825 GHzPeak Gain 3.0 dBi 4.0 dBiVSWR 2.0 : 1 2.0 : 1Isolation (db) > 20 > 15Impedence 50 OhmsMax.Power 1 WattsWeight 11 gConnector IPEXCable Length (mm) TBDDimension (mm) 90.4 x 86 x 10

Hardware SpecificationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 40AP-8100Feature SpecificationRadio PatternsRadio - 1(5 GHz)Port-1Port-2Radio PatternsRadio - 2(2.4 GHz)Port-1Port-2

Hardware SpecificationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 413.3 ORiNOCO® AP-9100Category SpecificationPower RequirementsPower Adapter: 12V/1.25APower over Ethernet (PoE) (optional): 48V / Any 802.3af compliant Gigabit PoERadio Module Dual Radio Access Point, 3x3 MIMO per radioRadio1: IEEE 802.11a/n/ac (5 GHz)Radio2: IEEE 802.11b/g/n(2.4 GHz)Refer Device Operational Modes.Wireless Protocol 802.11b/g/n802.11acFrequency 5.150 GHz – 5.850 GHz2.400 GHz – 2.484 GHz* Subject to Individual Country RegulationsChannel bandwidth20MHz and 40MHz for 802.11b/g/n20MHz, 40MHz and 80 MHz for 802.11acModulation •BPSK, QPSK, 16-QAM, 64-QAM and 256-QAM–With data rates up to 450 Mbps for 802.11b/g/n (3x3 MIMO)–With data rates up to 1300 Mbps for 802.11a/n/ac (3x3 MIMO)–With data rates up to 866.7 Mbps for 802.11ac (2x2 MIMO)Device Interface Ethernet: Auto-sensing 10/100/1000BASE-T EthernetLED Indicators Refer Step 4: View LEDsAntennas 6 Modular High Efficiency built-in PIFA Antennas with a peak gain of:–4.46dBi for (2.400 to 2.484) GHz frequency.–5.0dBi for (5.150 to 5.850) GHz frequency.Network Architecture TypeInfrastructure: The operational mode ‘g/n’ is backward compatible to mode ‘b’.

Hardware SpecificationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 42Receive Sensitivity* MCS refers to Modulation Coding Scheme.* HT refers to High Throughput.* VHT refers to Very High ThroughputRemote ConfigurationSupportTelnet and SSH, Web GUI (http) and SSL (https), TFTPSNMP v1, v2c and v3SNMP trap and SyslogPVNMS v1.3.2Message Authentication802.11i AES message authentication with 128 bit keysTKIP with 128 bit Michael Message Integrity CheckIntrusion detectionDetect MIC intrusion attacksDimensions (L x W x H)6.69 x 6.69 x 1.74 in. (170 x 170 x 44.1 mm)Rx Sensitivity Values for Wireless Interface Radio1 & Wireless Interface Radio2:AP-9100(Wireless Interface Radio1)11ac 11n 11aData Rate (MCS*)Receiver Sensitivity(dBm)Receiver Sensitivity(dBm)Data Rate (Mbps)Receiver Sensitivity(dBm)HT20(at 5 GHz)HT40(at 5 GHz)VHT80(at 5 GHz)HT20(at 5 GHz)HT40(at 5 GHz) MCS 0 -92 -90 -87 -92 -91 6-92 MCS 9 -- -63 -60 -- -- 54 -75 MCS 8 -67 -- -- -92 -91AP-9100(Wireless Interface Radio2)11b 11g 11nData Rates(Mbps)Receiver Sensitivity(dBm)Data Rates (Mbps)Receiver Sensitivity(dBm)Data Rate (MCS*)Receiver Sensitivity(dBm)HT20(at 2.4 GHz)HT40(at 2.4 GHz)1-95 6-90 MCS 0/8/16 -91 -88 11 -90 54 -76MCS 7/15/23-73 -72

Hardware SpecificationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 433.3.1 Antenna SpecificationsWeight 0.400 kg (0.88 lbs)Environmental Operating Temperatures:0 to 40ºC (32ºF to 104ºF)Storage Temperature:- 20º to 60ºC (-4ºF to 140ºF)Humidity (non-condensing)5% ~ 90% typicalMTBF >500,000 hrsPower Consumption< 12.9 wattsWarranty One year parts/laborFeature SpecificationFrequency Range 2.400 GHz - 2.484 GHz 5.150 GHz – 5.850 GHzPeak Gain 4.46 dBi 5.0 dBiVSWR 2.0 : 1 2.0 : 1Isolation (db) > 25Impedence 48 OhmsMax.Power 2 WattsWeight 10 gConnector IPEXCable Length (mm) 100~180Dimension (mm) 90 x 90 x 10

Hardware SpecificationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 44AP-9100Feature SpecificationRadio PatternsRadio - 1(2.45 GHz) Antenna-1 Antenna-2 Antenna-3 Radio PatternsRadio - 2(5.55 GHz) Antenna-4 Antenna-5 Antenna-6

Hardware SpecificationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 453.3.2 IEEE Spectral Mask Specifications:Wireless Interface Radio1& Radio2 of the AP-9100 device comply with the IEEE Spectral Mask Specifications.Wireless Interface Radio1Wireless Interface Radio2

ORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 46AGlossary and AbbreviationsGlossaryAAccess point A wireless network transceiver or “base station” hub, often used toconnect a local area network to one or more wireless devices. An accesspoint (also called AP) can provide a communication link to a wired localarea network also. Advanced Encryption Standard (AES) It is a symmetric-key encryption standard, containing three block ciphersAES-128, AES-192, AES-256. Each of these ciphers has a 128-bit blocksize, with key sizes of 128, 192 and 256 bits, respectively.DDual-Band Dual-band refers to a device's ability to function on two different frequency bands.HHTTP/HTTPS Hypertext Transfer Protocol (HTTP) is the protocol to transport Web pages.When you access the Internet with your browser, the HTTP protocol isused for data transport (http://www.Tsunamiwireless.com). When youaccess the unit by using the Web Interface, HTTP is used to transport theinformation. HTTPS is the Secure Hypertext Transfer Protocol.MManagement Information Base (MIB) A Management Information Base (MIB) is a formal description of a set ofnetwork objects that can be managed with the Simple NetworkManagement Protocol (SNMP). A MIB can be loaded by a managementapplication so that it knows the unit specific objects.OOrthogonal Frequency Division Multiplexing (OFDM)OFDM is a frequency-division multiplexing (FDM) scheme, a method ofencoding digital data on multiple carrier frequencies. A large number ofclosely spaced orthogonal sub-carrier signals are used to carry data. Thedata is divided into several parallel data streams/channels, one for eachsub-carrier, maintaining total data rates similar to conventionalsingle-carrier modulation schemes in the same bandwidth.

Glossary and AbbreviationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 47SScanTool Proxim’s ScanTool is a software utility that runs on Microsoft Windowsmachine. By using ScanTool, you can•Scan devices (Proxim devices only) available on the network•Obtain device’s IP address•Modify device’s IP Configuration parameters (IP Address, Address Type, Gateway and so on)•Launch the Web interface•Switch between the network adapters, if there are multiple network adapters in the Personal ComputerSimple Network Management Protocol (SNMP)A protocol used for the communication between a network managementapplication and the devices it is managing. The network managementapplication is called the SNMP manager and the devices it manages willhave SNMP agents. Not only the unit but also almost every network devicecontains a SNMP agent. The manageable objects of a device are arrangedin a Management Information Base, also called MIB. The Simple NetworkManagement Protocol (SNMP) allows managers and agents tocommunicate for accessing these objects.Single-Band Single-band refers to a device's ability to function only on one frequencyband.TTCP / IP The TCP/IP internet-suite protocol describes a set of general designguidelines and implementations of specific networking protocols toenable computers to communicate over a network. TCP/IP providesend-to-end connectivity specifying how data should be formatted,addressed, transmitted, routed and received at the destination.Telnet Telnet is a network protocol used on the Internet or local area networks toaccess the command-line interface, on a remote host. Most networkequipment and operating systems with a TCP/IP stack support a Telnetservice for remote configuration.Trivial File Transfer Protocol (TFTP) Trivial File Transfer Protocol (TFTP) is a lightweight protocol for transferringfiles that is like a simple form of File Transfer Protocol (FTP). A TFTP client isimplemented on the unit. By using the upload and download commands,the unit can copy a file to or from a TFTP server.VVLAN The Virtual Local Area Network (VLAN) feature helps in logical grouping ofnetwork host on different physical LAN segments, which cancommunicate with each other as if they are all on the same physical LANsegment.

Glossary and AbbreviationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 48AbbreviationsWWPA Wi-Fi Protected Access is a security standard based on IEEE 802.11ispecification, that provides a high level of wireless network security. Ituses data encryption through the Temporal Key Integrity Protocol (TKIP).TKIP scrambles the keys and ensures that the keys are not tampered with.User authentication is performed through the Extensible AuthenticationProtocol (EAP), to ensure that only authorized network users can accessthe network. AAP Access PointAES Advanced Encryption StandardCCLI Command Line InterfaceFFCC Federal Communications CommissionGGbps Gigabit Per SecondGPL General Public LicenseHHTTP HyperText Transfer ProtocolHTTPS HyperText Transfer Protocol SecureIIEEE Institute of Electrical and Electronics EngineersIP Internet ProtocolIC Industry CanadaLLAN Local Area NetworkLED Light Emitting DiodeLGPL Lesser General Public LicenseMMAN Metropolitan Area Networks

Glossary and AbbreviationsORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 49Mbps Megabits Per SecondMIMO Multiple-input and multiple-outputMCS Modulation Coding SchemeOOFDM Orthogonal Frequency Division MultiplexingPPoE Power Over EthernetPIFA Planar Inverted ‘F’ AntennaSSKU Stock Keeping UnitSNMP Simple Network Management ProtocolSNTP Simple Network Time ProtocolTTCP Transmission Control ProtocolTFTP Trivial File Transfer ProtocolTKIP Temporal Key Integrity ProtocolUUSM User Security ModelWWLAN Wireless Local Area NetworksWPA Wi-Fi Protected Access

ORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 50BStatement of WarrantyWarranty CoverageProxim Wireless Corporation warrants that its products are manufactured solely from new parts, conform substantially tospecifications, and will be free of defects in material and workmanship for a Warranty Period of 1 year from the date ofpurchase.Repair or ReplacementWhen Proxim determines that a returned product does not meet the warranted criteria during the warranty period, Proxim atits option, will either: (a) repair the defective product; (b) replace the defective product with a new or refurbished productthat is at least equivalent to the original; or (c) refund the price paid for the defective product. Generally, products arerepaired or replaced within thirty (30) business days of receipt of the product at a Proxim Logistical/Repair Center. Thewarranty period for repaired or replacement products is ninety (90) days or the remainder of the original warranty period,whichever is longer. These three alternatives constitute the customer’s sole and exclusive remedy and Proxim’s sole andexclusive liability under warranty provisions.Limitations of WarrantyProxim’s warranties do not apply to any product (hardware or software) which has (a) been subjected to abuse, misuse,neglect, accident, or mishandling, (b) been opened, repaired, modified, or altered by anyone other than Proxim, (c) been usedfor or subjected to applications, environments, or physical or electrical stress or conditions other than as intended andrecommended by Proxim, (d) been improperly stored, transported, installed, or used, or (e) had its serial number or otheridentification markings altered or removed.Buyers can contact Proxim Wireless Customer Service Center either by telephone or via web. Support and repair of productsthat are out of warranty will be subject to a fee. Contact information is shown below. Additional support information can befound at Proxim Wireless’s web site at http://support.proxim.com.Contact technical support via telephone as follows:USA and Canada Customers •Phone: +1-408-383-7700; +1-866-674-6626•Business Hours: 24x7 live response. Tier 3 support: 8 a.m. to 5 p.m. M-F PDT (UTC/GMT -7 hrs)International Customers •Phone: +1-408-383-7700; 0800-916475 (France); 8-800-100-9485 (Russia)•Business Hours: 24x7 live response. Tier 3 support: 8 a.m. to 5 p.m. M-F PDT (UTC/GMT -7 hrs)General ProceduresWhen contacting the Customer Service for support, Buyer should be prepared to provide the product description and serialnumber and a description of the problem. The serial number should be on the product. In the event the Customer Service Center determines that the problem can be corrected with a software update, Buyer mightbe instructed to download the update from Proxim Wireless’s web site or, if that’s not possible, the update will be sent toBuyer. In the event the Customer Service Center instructs Buyer to return the product to Proxim Wireless for repair orreplacement, the Customer Service Center will provide Buyer a Return Material Authorization (“RMA”) number and shippinginstructions. Buyer must return the defective product to Proxim Wireless, properly packaged to prevent damage, shippingprepaid, with the RMA number prominently displayed on the outside of the container.

Statement of WarrantyORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 51Calls to the Customer Service Center for reasons other than product failure will not be accepted unless Buyer has purchased aProxim Wireless Service Contract or the call is made within the warranty period. After the warranty period, Technical Supportis fee based (detailed in Technical Services and Support).If Proxim Wireless reasonably determines that a returned product is not defective or is not covered by the terms of thisWarranty, Buyer shall be charged a service charge and return shipping charges.Other InformationSearch KnowledgebaseProxim Wireless stores all resolved problems in a solution database at the following URL: http://support.proxim.com.Ask a Question or Open an IssueSubmit a question or open an issue to Proxim Wireless technical support staff at the following URL: http://support.proxim.com/cgi-bin/proxim.cfg/php/enduser/ask.php.

Technical Services and SupportORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 53Telephone SupportContact technical support via telephone as follows:•USA and Canada Customers —Phone: +1-408-383-7700; +1-866-674-6626—Business Hours: 24x7 live response. Tier 3 support: 8 a.m. to 5 p.m. M-F PDT (UTC/GMT -7 hrs)•International Customers —Phone: +1-408-383-7700; 0800-916475 (France); 8-800-100-9485 (Russia)—Business Hours: 24x7 live response. Tier 3 support: 8 a.m. to 5 p.m. M-F PDT (UTC/GMT -7 hrs)ServPak SupportTo provide even greater investment protection, Proxim Wireless offers a cost-effective support program called ServPak.ServPak is a program of enhanced service support options that can be purchased as a bundle or individually, tailored to meetyour specific needs. Whether your requirement is round the clock technical support or advance replacement service, we areconfident that the level of support provided in every service in our portfolio will exceed your expectations.All ServPak service bundles are sold as service contracts that provide coverage for specific products from 1 to 3 years. Servpakbundles are considered an upgrade to the standard product warranty and not an extension.24x7 Basic TechnicalSupportBasic Advanced Replacement (Two business days/ International economy shipment service)Priority Advanced Replacement(Next business day/ International priority shipment service)Priority Comprehensive Advance Replacement (Next business day/ International priority shipment service)8x7 Advanced TechnicalSupport24x7 Advanced Technical Support24x7 Advanced Technical SupportSoftware Maintenance PVES & PV NMSSupportPVES & PV NMSSupportAccess to Knowledge BasePost-InstallationOptimization50% discount on Onsite Technical Support and Services

Technical Services and SupportORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 54Additional Information on ServPak OptionsAdvanced Replacement of HardwareIn the event of a hardware failure, our guaranteed turnaround time for return to factory repair is 30 days or less. Customerswho purchase this service are guaranteed replacement of refurbished or new hardware to be shipped out within one or twobusiness days, as applicable. Options are available for shipment services depending on the customer’s support needs.Hardware is shipped on business days, Monday – Friday excluding Holidays, 8:00 AM – 3:30 PM Eastern Time.Comprehensive Advanced Replacement of HardwareIn addition to ServPak Prime options, in the event of a hardware failure, Proxim will repair or replace the failed product for anyreason, other than vandalism.7x24x365 AvailabilityUnlimited, direct access to technical support engineers 24 hours a day, 7 days a week, 365 days a year including Holidays.8x5 AvailabilityUnlimited, direct access to world-class technical support engineers 8 hours a day, 5 days a week, Monday through Friday from8:00AM - 5:00PM Pacific Standard Time.Basic Technical SupportCustomers who purchase this service can be rest assured that their call will be answered by Proxim’s Tier 1 technical supportand a case opened immediately to document the problem and provide initial troubleshooting to identify the solution andresolve the incident in a timely manner.Advanced Technical SupportIn addition to Proxim’s world-class Tier 1 technical support, customers will be able to have their more complex issues escalatedto our world-class Tier 3 technical support engineers. Our Tier 3 engineers will review specific configurations to troubleshootintricate issues and will also provide helpful insights regarding Proxim’s products and various tips from decades of collectiveexperience in the wireless industry.Software MaintenanceIt's important to maintain and enhance security and performance of wireless equipment and Proxim makes this easy byproviding a Software Maintenance program that enables customers to access new feature and functionality rich softwareupgrades and updates. Customers will also have full access to Proxim's vast Knowledgebase of technical bulletins, whitepapers and troubleshooting documents.Post-Installation OptimizationYou can consult with our technical support engineers to enhance performance and efficiency of your network.Post-installation optimization services include:•Review frequencies to select best possible channel•Review Modulation, Channel Bandwidth, MIMO, and WORP settings to optimize throughput and link quality

Technical Services and SupportORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 55•Review Satellite Density & TPC/ATPC settings•Assistance with Bandwidth controls•Assistance with QoS, RADIUS, and VLAN settings on Proxim equipmentTo purchase ServPak support services, please contact your authorized Proxim distributor. To receive more information or forquestions on any of the available ServPak support options, please visit our website athttp://www.proxim.com/support/servpak, call Proxim Support (For telephone numbers, see Telephone Support) or send anemail to servpak@proxim.com.Technical Support PolicyTechnical Support for Current Products during Warranty PeriodAll Customers are entitled to free technical support for the Proxim products they purchase from Proxim’s authorized resellersor distributors. Technical Support is defined as communication via the Proxim Support website (http://my.proxim.com) and/orvia telephone. This technical support will be provided for free for the entire time the product is covered by a Proxim warranty.The term of Proxim’s warranty is determined according to the agreement under which the product was sold and generallyvaries from 3 months to 2 years depending on the product. If a Customer disagrees with Proxim’s determination of warrantyduration, a request for review supported by a copy of all product purchase documentation may be submitted.Technical Support for Current Products after Warranty PeriodAfter the warranty period, technical support on products then being sold by Proxim will be based upon one of the followingthree options Customers can choose:•Customers can choose to purchase one of Proxim’s ServPak extended warranty and enhanced support packages forthe product•Customers can choose to purchase one-time per-incident technical support for the product for a fee •Customers can choose to call the reseller or distributor who sold them the product for technical supportTech Support on Discontinued ProductsFor EOL (End of Life) products no longer being sold by Proxim the following support options may be available, depending onthe product:•Fee based per-incident technical support on a per hour basis. This fee is in addition to any subsequent fees that maybe charged to repair the product. Please contact Proxim Customer Service for current product support and repairpricing and availability.•Additional support options may be available from the reseller or distributor from whom the product was purchased.Support for discontinued products is provided on a “best effort” basis and is subject to the availability of necessarycomponents, equipment, and other technical resources.Note that Proxim is unable to support or warrant any equipment that has been modified, whether this modification is physical, or if third-party software codes have been loaded onto the product.

ORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 56DFCC Safety & Regulatory InformationFCC Safety InformationThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of theFCC (Federal Communications Commission) Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device maynot cause harmful interference, and (2) this device must accept any interference received, including interference that maycause undesired operation.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is notpossible.: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 30cm between the radiator & your body.IC Safety InformationThis device complies with IC (Industry Canada) licence-exempt RSS standard(s). Operation is subject to the following twoconditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interferencethat may cause undesired operation of the device.: NOTETHE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

FCC Safety & Regulatory InformationORiNOCO® 802.11n & 802.11ac Access Points - Hardware Installation Guide 57Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateurde l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement.• The device could automatically discontinue transmission in case of absence of information to transmit, or operationalfailure. Note that this is not intended to prohibit transmission of control or signalling information or the use of repetitivecodes where required by the technology. • The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channelmobile satellite systems.• The maximum antenna gain permitted (for devices in the 5250-5350 MHz and 5470-5725 MHz bands) to comply with thee.i.r.p. limit; and the maximum antenna gain permitted (for devices in the 5725-5825 MHz band) to comply with the e.i.r.p.limits specified for point-to-point and non point-to-point operation as appropriate, as stated in RSS-210 Annex 9 A9.2(3). • Users should also be cautioned to take note that high power radars are allocated as primary users (meaning they havepriority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LANdevices. : NOTETHE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.: IC Radiation Exposure Statement:This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 30 cm between the radiator and our body.

Navigation menu