Psion Teklogix Vehicle Mount Computer 8525 G2 Users Manual

8525 G2 to the manual 1261812c-4b81-1d74-a563-6dab49d3c7ec

2015-02-06

: Psion-Teklogix Psion-Teklogix-Vehicle-Mount-Computer-8525-G2-Users-Manual-521113 psion-teklogix-vehicle-mount-computer-8525-g2-users-manual-521113 psion-teklogix pdf

Open the PDF directly: View PDF .
Page Count: 230

Download
Open PDF In Browser	View PDF

8525 G2/8530 G2
Vehicle-Mount Computer
User Manual
January 16, 2007

ISO 9001 Certified
Quality Management System

Part No. 8100083.B

© Copyright 2007 by Psion Teklogix Inc., Mississauga, Ontario
This document and the information it contains is the property of Psion Teklogix Inc.,
is issued in strict confidence, and is not to be reproduced or copied, in whole or in
part, except for the sole purpose of promoting the sale of Teklogix manufactured
goods and services. Furthermore, this document is not to be used as a basis for
design, manufacture, or sub-contract, or in any manner detrimental to the interests
of Psion Teklogix Inc.

All trademarks are the property of their respective holders.

Return-To-Factory Warranty
Psion Teklogix provides a return to factory warranty on this product for a period of
twelve (12) months in accordance with the Statement of Limited Warranty and Limitation of Liability provided at www.psionteklogix.com/warranty. (If you are not
already a member of Teknet and you attempt to view this warranty, you will be asked
to register. As a member of Teknet, you’ll have access to helpful information about
your Psion Teklogix products at no charge to you.) In some regions, this warranty
may exceed this period. Please contact your local Psion Teklogix office for details.
For a list of offices, see Appendix A: “Support Services And Worldwide Offices”.
The warranty on Psion Teklogix manufactured equipment does not extend to any
product that has been tampered with, altered, or repaired by any person other than an
employee of an authorized Psion Teklogix service organization. See Psion Teklogix
terms and conditions of sale for full details.
Important:Psion Teklogix warranties take effect on the date of shipment.

Support Services
Psion Teklogix provides a complete range of product support services to its customers. For detailed information, please refer to Appendix A: “Support Services And
Worldwide Offices”. This section also provides information about accessing support
services through the Psion Teklogix web site.

Waste Electrical and Electronic Equipment (WEEE) Directive
2002/96/EC
This Product, and its accessories, comply with the requirements of the Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC. If your end-of-life
Psion Teklogix product or accessory carries a label as shown here, please contact
your local country representative for details on how to arrange recycling.
For a list of international subsidiaries, please go to:
www.psionteklogix.com/public.aspx?s=us&p=Contacts.

Restriction on Hazardous Substances (RoHS) Directive

2002/95/EC

What is RoHS?
The European Union has mandated that high environmental standards be met in the
design and manufacture of electronic and electrical products sold in Europe, to reduce
hazardous substances from entering the environment. The “Restriction on Hazardous
Substances Directive (RoHS)” prescribes the maximum trace levels of lead, cad-

mium, mercury, hexavalent chromium, and flame retardants PBB and PBDE that
may be contained in a product. Only products meeting these high environmental
standards may be “placed on the market” in EU member states after July 1, 2006.

RoHS Logo
Although there is no legal requirement to mark RoHS-compliant products, Psion
Teklogix Inc. indicates its compliance with the directive as follows:
The RoHS logo located either on the back of the product or underneath the battery in
the battery compartment (or on a related accessory such as the charger or docking
station) signifies that the product is RoHS-compliant as per the EU directive. Other
than as noted below, a Psion Teklogix product that does not have an accompanying
RoHS logo signifies that it was placed on the EU market prior to July 1, 2006, and is
thereby exempt from the directive.
Note:

Not all accessories or peripherals will have a RoHS logo due to physical
space limitations or as a result of their exempt status.

Disclaimer
Every effort has been made to make this material complete, accurate, and up-todate. In addition, changes are periodically added to the information herein; these
changes will be incorporated into new editions of the publication.
Psion Teklogix Inc. reserves the right to make improvements and/or changes in the
product(s) and/or the program(s) described in this document without notice, and
shall not be responsible for any damages, including but not limited to consequential
damages, caused by reliance on the material presented, including but not limited to
typographical errors.

TABLE
Program License Agreements . .
Approvals And Safety Summary .

OF CONTENTS

. . . . . . . . . . . . . . . . . . . . . . . . . .I
. . . . . . . . . . . . . . . . . . . . . . . . VII

Chapter 1: Introduction
1.1
1.2
1.3
1.4

About This Manual . . . . . . . . . . . . . . . . . . .
Text Conventions . . . . . . . . . . . . . . . . . . . .
About The 8525 G2/8530 G2 Vehicle-Mount . . . . .
8525 G2/8530 G2 Features . . . . . . . . . . . . . . .
1.4.1 8525 G2 Vehicle-Mount Computer . . . . . . .
1.4.2 8530 G2 Vehicle-Mount Computer & Keyboard

.
.
.
.
.
.

3
4
4
4
7
8

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

. 11
. 11
. 12
. 12
. 14
. 14
. 15
. 15
. 15
. 21
. 22
. 23
. 24
. 24
. 24
. 26

Chapter 2: Basic Checkout
2.1
2.2
2.3

Preparing The 8525 G2/8530 G2 For Operation . . .
8525 G2/8530 G2 Safety Instructions. . . . . . . . .
8525 G2/8530 G2 Freezer & Outdoor Guidelines . .
2.3.1 Important Operating Instructions . . . . . . .
2.4 Switching The 8525 G2 On And Off . . . . . . . . .
2.5 Switching The 8530 G2 On And Off . . . . . . . . .
2.6 Calibrating The Touchscreen . . . . . . . . . . . . .
2.7 Configuring Your IEEE 802.11 Radio . . . . . . . .
2.8 Setting Up Marvell-88W8300 802.11g Radios . . . .
2.8.1 Assigning An IP Address . . . . . . . . . . .
2.8.2 Name Servers Tab . . . . . . . . . . . . . . .
2.8.3 Advanced Features. . . . . . . . . . . . . . .
2.9 Setting Up Summit DC 802.11 SC CF Radios–SCU .
2.9.1 Assigning The IP Address . . . . . . . . . . .
2.9.2 Using The SCU To Connect To The WLAN .
2.10 SCU Tabs . . . . . . . . . . . . . . . . . . . . . . .

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Contents
2.10.1 Main Tab . . . . . . . . . . . . . . . . .
2.10.2 Config Tab . . . . . . . . . . . . . . . .
2.10.3 Global Settings Tab . . . . . . . . . . .
2.10.4 Status Tab . . . . . . . . . . . . . . . .
2.10.5 Diags Tab. . . . . . . . . . . . . . . . .
2.11 Resetting The 8525 G2/8530 G2 Vehicle-Mount

.
.
.
.
.
.

27
28
33
35
35
36

Features Of The 8525 G2/8530 G2 . . . . . . . . . . . .
The Internal Backup Battery . . . . . . . . . . . . . . . .
The Keyboard . . . . . . . . . . . . . . . . . . . . . . .
3.3.1 Modifier Keys . . . . . . . . . . . . . . . . . . .
3.3.2 The Keys . . . . . . . . . . . . . . . . . . . . . .
3.4 Function Keys And Macro Keys. . . . . . . . . . . . . .
3.4.1 Function Keys . . . . . . . . . . . . . . . . . . .
3.4.2 Macro Keys. . . . . . . . . . . . . . . . . . . . .
3.4.3 The Keypad Backlight . . . . . . . . . . . . . . .
3.5 The Display . . . . . . . . . . . . . . . . . . . . . . . .
3.5.1 Calibrating The Touchscreen. . . . . . . . . . . .
3.6 8525 G2/8530 G2 Indicators. . . . . . . . . . . . . . . .
3.6.1 Power Indicator LED. . . . . . . . . . . . . . . .
3.6.2 LEDs . . . . . . . . . . . . . . . . . . . . . . . .
3.6.3 Onscreen Indicators . . . . . . . . . . . . . . . .
3.6.4 Audio Indicators . . . . . . . . . . . . . . . . . .
3.7 Scanning . . . . . . . . . . . . . . . . . . . . . . . . . .
3.7.1 Scanning Techniques. . . . . . . . . . . . . . . .
3.7.2 Scan LED Indicators . . . . . . . . . . . . . . . .
3.7.3 Troubleshooting . . . . . . . . . . . . . . . . . .
3.7.4 Operating One Dimensional (1D) Laser Scanners .
3.7.5 Operating PDF Laser Scanners. . . . . . . . . . .
3.8 Connecting & Disconnecting Tethered Peripherals . . . .
3.9 Monitoring The Network Connection . . . . . . . . . . .
3.10 Connecting An 8525 G2/8530 G2 To A PC . . . . . . . .
3.10.1 Using Microsoft ActiveSync To Work With Files.
3.11 General Maintenance . . . . . . . . . . . . . . . . . . .
3.11.1 Caring For The Touchscreen . . . . . . . . . . . .

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

39
41
41
41
42
44
44
44
45
45
45
46
46
47
48
51
51
52
52
53
53
54
54
55
55
56
56
56

Chapter 3: Getting To Know The 8525/30 G2
3.1
3.2
3.3

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Contents
3.11.2 Cleaning The 8525 G2/8530 G2. . . . . . . . . . . . . . . . . . 57

Chapter 4: Working With Windows CE 5.0
4.1

4.2
4.3

4.4

4.5

Navigating In Windows CE And Applications . . . .
4.1.1 Navigating Using A Touchscreen And Stylus.
4.1.2 Navigating Using The Keyboard . . . . . . .
Working With Files, Folders And Programs . . . . .
The Startup Desktop. . . . . . . . . . . . . . . . . .
4.3.1 The Desktop Icons . . . . . . . . . . . . . . .
4.3.2 The Taskbar . . . . . . . . . . . . . . . . . .
The Start Menu . . . . . . . . . . . . . . . . . . . .
4.4.1 The Desktop . . . . . . . . . . . . . . . . . .
4.4.2 Security Levels . . . . . . . . . . . . . . . .
4.4.3 Programs . . . . . . . . . . . . . . . . . . . .
4.4.4 Shortcuts . . . . . . . . . . . . . . . . . . . .
4.4.5 Settings. . . . . . . . . . . . . . . . . . . . .
4.4.6 Run. . . . . . . . . . . . . . . . . . . . . . .
4.4.7 Shutdown . . . . . . . . . . . . . . . . . . .
Using A Dialog Box. . . . . . . . . . . . . . . . . .

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

. 61
. 61
. 61
. 62
. 62
. 63
. 64
. 65
. 66
. 66
. 68
. 69
. 71
. 72
. 72
. 73

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

. 79
. 79
. 79
. 80
. 85
. 85
. 87
. 96
. 97
100
102
105
106
118
129

Chapter 5: Configuration
5.1
5.2
5.3
5.4
5.5

Remote Desktop Connection . . . . .
Pocket PC Compatibility . . . . . . .
The Control Panel . . . . . . . . . . .
Control Panel Icons . . . . . . . . . .
Basic Setup . . . . . . . . . . . . . .
5.5.1 Display Properties . . . . . . .
5.5.2 Keyboard Properties . . . . . .
5.5.3 Volume And Sound Properties
5.5.4 Power Properties. . . . . . . .
5.5.5 Stylus Properties . . . . . . . .
5.5.6 Manage Triggers. . . . . . . .
5.5.7 Certificate Assignment . . . .
5.5.8 Narrow Band Radio Setup. . .
5.5.9 Bluetooth Setup . . . . . . . .
5.5.10 Total Recall . . . . . . . . . .

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

iii

Contents
5.5.11
5.5.12
5.5.13
5.5.14

Input Panel . . . . . . . . . . . . . . . . . . . . . . . .
IPv6 Support . . . . . . . . . . . . . . . . . . . . . . .
Scanner Properties Setup . . . . . . . . . . . . . . . . .
SNMP (Simple Network Management Protocol) Setup .

.
.
.
.

. 134
. 136
. 137
. 157

External Bar Code Readers . . . . . . . . . . . . . . . . . . . .
6.1.1 PowerScan™ Standard, LR and XLR Bar Code Scanners
6.1.2 Entering Data With The Bar Code Reader . . . . . . . . .
Bluetooth Peripherals . . . . . . . . . . . . . . . . . . . . . . .
8525 G2/8530 G2 Mounting Accessories . . . . . . . . . . . . .
6.3.1 8525 G2/8530 G2 Mounting Recommendations. . . . . .
6.3.2 Installing The Cradle And Cradle Mounting Plate. . . . .
6.3.3 Installing The MT34XX RAM Mounting Kit . . . . . . .
6.3.4 8530 G2 Keyboard Mounting Options . . . . . . . . . . .
6.3.5 Wiring Guidelines . . . . . . . . . . . . . . . . . . . . .
6.3.6 8525 G2/8530 G2 Installation In High Voltage Vehicles .
6.3.7 8525 G2/8530 G2 Installation In Vehicles . . . . . . . . .
6.3.8 Wiring Vehicle Power To The 8525 G2/8530 G2 . . . . .

.
.
.
.
.
.
.
.
.
.
.
.
.

. 167
. 167
. 167
. 167
. 168
. 168
. 169
. 171
. 177
. 178
. 179
. 179
. 180

.
.
.
.
.

. 183
. 184
. 185
. 186
. 186

Chapter 6: Peripheral Devices & Accessories
6.1

6.2
6.3

Chapter 7: Specifications
7.1
7.2
7.3
7.4
7.5

8525 G2/8530 G2 Vehicle-Mount Specifications
Radio Specifications . . . . . . . . . . . . . . .
Bar Code Scanning. . . . . . . . . . . . . . . .
External Scanners . . . . . . . . . . . . . . . .
Internal Lithium-Ion Battery. . . . . . . . . . .

.
.
.
.
.

Appendix A: Support Services And Worldwide Offices
A.1 Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1
A.2 Product Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1
A.3 Worldwide Offices . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-2

Appendix B: Port Pinouts
B.1 Tether Port Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
B.2 RS232 Port Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
iv

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Contents
B.3 DB-26 Auxiliary Port Pinout . . . . . . . . . . . . . . . . . . . . . . B-2
B.4 External Keyboard–High Density DB-26 (8530 G2 Only) . . . . . . . B-3

Appendix C: USB Setup Application
C.1 USB Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1
C.1.1 Launching The Application . . . . . . . . . . . . . . . . . . . C-2
C.1.2 Installation Complete Dialog Box. . . . . . . . . . . . . . . . C-3

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

PROGRAM LICENSE AGREEMENTS
Microsoft's End User License Agreement

You have acquired a device (“DEVICE”) that includes software licensed by Psion Teklogix Inc.
from Microsoft Licensing Inc. or its affiliates (“MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “online” or electronic documentation
(“SOFTWARE”) are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved.
IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (“EULA”), DO NOT
USE THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT PSION
TEKLOGIX INC. FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A
REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON
THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT).
GRANT OF SOFTWARE LICENSE. This EULA grants you the following license:

•
•

•

You may use the SOFTWARE only on the DEVICE.
NOT FAULT TOLERANT. THE SOFTWARE IS NOT FAULT TOLERANT. PSION TEKLOGIX INC. HAS INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE IN THE DEVICE, AND MS
HAS RELIED UPON PSION TEKLOGIX INC. TO CONDUCT SUFFICIENT TESTING TO DETERMINE THAT THE SOFTWARE IS SUITABLE FOR SUCH USE.
NO WARRANTIES FOR THE SOFTWARE. THE SOFTWARE is provided “AS IS” and with all faults. THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY, AND
EFFORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU.
ALSO, THERE IS NO WARRANTY AGAINST INTERFERENCE
WITH YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST
INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

License Agreement

•

REGARDING THE DEVICE OR THE SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT BINDING ON,
MS.
Note on Java Support. The SOFTWARE may contain support for programs written in Java. Java technology is not fault tolerant and is not
designed, manufactured, or intended for use or resale as online control
equipment in hazardous environments requiring fail-safe performance, such
as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons
systems, in which the failure of Java technology could lead directly to
death, personal injury, or severe physical or environmental damage. Sun
Microsystems, Inc. has contractually obligated MS to make this disclaimer.
No Liability for Certain Damages. EXCEPT AS PROHIBITED BY
LAW, MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES
ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL
APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL MS BE LIABLE FOR ANY
AMOUNT IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS
(U.S. $250.00).
Limitations on Reverse Engineering, Decompilation, and Disassembly.
You may not reverse engineer, decompile, or disassemble the SOFTWARE,
except and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation.
SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS. You may permanently transfer rights under this EULA only as part
of a permanent sale or transfer of the Device, and only if the recipient
agrees to this EULA. If the SOFTWARE is an upgrade, any transfer must
also include all prior versions of the SOFTWARE.
EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is
subject to U.S. export jurisdiction. You agree to comply with all applicable
international and national laws that apply to the SOFTWARE, including the
U.S. Export Administration Regulations, as well as end-user, end-use and
destination restrictions issued by U.S. and other governments. For additional information see http://www.microsoft.com/exporting/.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

License Agreement

Psion Teklogix Inc. End User License Agreement
IMPORTANT - READ CAREFULLY:
This License Agreement (“Agreement”) is a legal agreement between you and Psion Teklogix (“we”),
the licensor of this software package (“Software”), for your use of the Software only as authorized in
this Agreement.
By clicking on the “Accept” or other appropriate assent button and/or installing the Software, you
agree to be and are hereby bound by the terms and conditions of this Agreement. If you do not agree
with this Agreement, we do not grant you a license to the Software, and you may not install or use the
Software or any accompanying documentation.
The Software is the property of Psion Teklogix Inc. or its licensors and is protected by copyright laws
and international copyright treaties, as well as other intellectual property laws and treaties. The Software is licensed, not sold. Psion Teklogix Inc. provides the Software and licenses its use worldwide.
You assume responsibility for the selection of the Software to achieve your intended results, and for the
use and results obtained from it.

1. GRANT OF LICENSE

We hereby grant you and you hereby accept a non-exclusive, non-transferable,
limited license to install and use the Software in object code form only, subject to
the terms and restrictions set forth in this Agreement. Except as explicitly set forth
below, (i) you are not permitted to copy, sell, lease or rent, distribute or sublicense
the Software or to use the Software in a time-sharing arrangement or in any other
unauthorized manner; (ii) no license is granted to you in the human readable code of
the Software (source code); and (iii) this Agreement does not grant you any rights to
patents, copyrights, trade secrets, trademarks, intellectual property or any other
ownership rights with respect to the Software.
2. DESCRIPTION OF REQUIREMENTS, RESTRICTIONS, RIGHTS AND
LIMITATIONS

a. Copy. The right and license granted to you shall be limited to installation and use
of the Software up to but not exceeding the number of copies you have licensed.
However, you may make a copy of the Software for backup or archival purposes.
You shall not remove any copyright notice or proprietary notices, labels or marks
in or on the Software.
b. Evaluation. As part of evaluation, you may install and use the Software only
during the specified evaluation period. Unless you register the license as
described below, the evaluation license shall expire upon the expiration of the
evaluation period.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

III

License Agreement
c. License Registration. You will be required to provide a license ID, unique to
each device, for registering your Software license. As part of your software
license registration, we will provide you a corresponding license key for each
device.
d. No Modifications. You may not modify or create any derivative work of the
Software or any copy or portion thereof nor may you remove any Software
identification, copyright or other notices.
e. No Distribution. You may not distribute the Software, in whole or in part, to any
other third party.
f. Virus Program. You may not develop or knowingly incorporate any virus
program that may be harmful to a computer or a network in conjunction with the
Software, or use the Software for any other purpose as which may be harmful to
a third party.
g. Assignment. You may not assign or transfer the Software to a third party or
allow a third party to use the same.
h. Reverse Engineering. Modification, reverse engineering, reverse compiling,
disassembly, unbundling or extraction of the Software is expressly prohibited.
i. Export Restrictions. You agree to comply with all applicable laws and
regulations and that you will not export or re-export the Software, or any part or
copies thereof, or any products utilizing the Software in violation of applicable
laws or regulations of the United States or the country in which you obtained
them.
3. HIGH RISK ACTIVITIES

The Software is not fault-tolerant and is not designed, manufactured or intended for
use or resale as on-line control equipment in hazardous environments requiring failsafe performance, such as in the operation of nuclear facilities, aircraft navigation or
communication systems, air traffic control, direct life support machines, or weapons
systems, in which the failure of the Software could lead to death, personal injury, or
severe physical or environmental damage (“High Risk Activities”). We specifically
disclaim any express or implied warranty of fitness for High Risk Activities.
4. DISCLAIMER OF WARRANTY

We do not warrant uninterrupted or error free operation of the Software nor do we
warrant that the Software will meet your requirements. THE SOFTWARE IS
PROVIDED “AS-IS” WITHOUT ANY WARRANTY WHATSOEVER AND
WITHOUT ANY TECHNICAL SUPPORT OF ANY KIND. WE DISCLAIM
ANY AND ALL REPRESENTATIONS, WARRANTIES AND CONDITIONS,
IV

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

License Agreement
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABLE
QUALITY OR FITNESS FOR A PARTICULAR PURPOSE. WE DO NOT
WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE
OR THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS
CORRECTNESS, ACCURACY, RELIABILITY, USE WITH FUTURE PSION
TEKLOGIX DEVICES INTRODUCED, OR OTHERWISE. YOU EXPRESSLY
ACKNOWLEDGE AND AGREE THAT USE OF THE SOFTWARE IS AT
YOUR SOLE RISK AND YOU ARE RESPONSIBLE FOR INSTALLATION OF
THE SOFTWARE ON YOUR COMPUTER.
5. LIMITATION OF LIABILITY

We are liable for no more than the value of the license fee that you paid for the
Software. This limitation is cumulative and our responsibility for multiple claims
will not exceed in aggregate this limit.
Under no circumstances are we or our third party suppliers liable for damages of
third parties claimed against you, or for harm to your records or data, or special,
incidental, indirect, or consequential damages, including but not limited to lost
profits, lost business revenue or failure to realize expected savings, loss of data, loss
of use of the Software or any associated equipment, downtime and user's time, even
if you informed us of their possibility, or for breach of any express or implied
warranty, breach of contract, negligence, strict liability or any other legal theory
related to the Software. This limitation applies whether you are entitled to claim
damages from us or our third party suppliers as a matter of contract or tort.
6. COPYRIGHTS, OWNERSHIP AND PROPRIETARY RIGHTS

All title and copyrights in and to the Software, and any copies thereof, are owned by
Psion Teklogix Inc. or its suppliers. The Software also contains copyrighted material
licensed from our suppliers or obtained from open source and all rights to such
copyrighted material rests with such suppliers. Additional third party license terms
and conditions may apply. We retain title to the Software and any copies made from
it. Any copies of the Software you made are subject to the restrictions of this
Agreement.
WE DISCLAIM ALL WARRANTIES AND INDEMNITIES, EXPRESS,
IMPLIED OR STATUTORY, FOR PATENT OR COPYRIGHT INFRINGEMENT.
7. CONFIDENTIALITY

You agree not to use or disclose any proprietary information provided by us, except
for the purposes of this Agreement. You agree not to reproduce any of the
copyrighted materials unless expressly permitted by this Agreement.
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

License Agreement
8. ENDING THIS AGREEMENT

We may terminate this Agreement and your license immediately without notice if
(a) you fail to comply with any term of this Agreement, or (b) your rights are
assigned by you, by operation of law or otherwise. In such event, you must return or
destroy all copies and component parts of the Software and documentation, as well
as any other Psion Teklogix proprietary information in your possession, within
fourteen (14) days of the date of termination. Any rights and obligations under this
Agreement that by their nature continue after it ends will remain in effect until they
are completed.
9. GENERAL
The laws of the Province of Ontario and the federal laws applicable therein,
excluding the conflict of laws provisions, govern this Agreement. If any provision
of this Agreement is deemed invalid or unenforceable by any country, that particular
provision will be deemed modified to the extent necessary to make the provision
valid and enforceable, and the remaining provisions will remain in full force and
effect. Failure by us to insist on strict performance or to exercise a right when
entitled, does not prevent us from doing so at a later time, either in relation to that
default or any subsequent one.
No modifications of this Agreement shall be effective unless in writing and
approved by us.
You acknowledge that you have read this Agreement, understand it, and that it is the
complete agreement between you and Psion Teklogix with respect to the subject
matter hereof and supersedes all prior agreements, oral or written.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

APPROVALS AND SAFETY SUMMARY
CE Marking
When used in a residential, commercial or light industrial environment the product
and its approved UK and European peripherals fulfil all requirements for CE marking.

R&TTE Directive 1999/5/EC
This equipment complies with the essential requirements of EU Directive
1999/5/EC (Declaration available: www.psionteklogix.com).
Cet équipement est conforme aux principales caractéristiques définies dans la
Directive européenne RTTE 1999/5/CE. (Déclaration disponible sur le site:
www.psionteklogix.com).
Die Geräte erfüllen die grundlegenden Anforderungen der RTTE-Richtlinie
(1999/5/EG). (Den Wortlaut der Richtlinie finden Sie unter:
www.psionteklogix.com).
Questa apparecchiatura è conforme ai requisiti essenziali della Direttiva Europea
R&TTE 1999/5/CE. (Dichiarazione disponibile sul sito: www.psionteklogix.com).
Este equipo cumple los requisitos principales de la Directiva 1995/5/CE de la UE,
“Equipos de Terminales de Radio y Telecomu-nicaciones”. (Declaración disponible
en: www.psionteklogix.com).
Este equipamento cumpre os requisitos essenciais da Directiva 1999/5/CE do
Parlamento Europeu e do Conselho (Directiva RTT). (Declaração disponível no
endereço: www.psionteklogix.com).
Ο εξοπλισμός αυτός πληροί τις βασικές απαιτήσεις της κοινοτικής οδηγίας EU
R&TTE 1999/5/EΚ. (Η δήλωση συμμόρφωσης διατίθεται στη διεύθυνση:
www.psionteklogix.com)
Deze apparatuur voldoet aan de noodzakelijke vereisten van EU-richtlijn
betreffende radioapparatuur en telecommunicatie-eindappa-ratuur 199/5/EG.
(verklaring beschikbaar: www.psionteklogix.com).
Dette udstyr opfylder de Væsentlige krav i EU's direktiv 1999/5/EC om Radio- og
teleterminaludstyr. (Erklæring findes på: www.psionteklogix.com).

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

VII

Approvals And Safety Summary
Dette utstyret er i overensstemmelse med hovedkravene i R&TTE-direktivet
(1999/5/EC) fra EU. (Erklæring finnes på: www.psionteklogix.com).
Utrustningen uppfyller kraven för EU-direktivet 1999/5/EC om ansluten
teleutrustning och ömsesidigt erkännande av utrustningens överensstämmelse
(R&TTE). (Förklaringen finns att läsa på: www.psionteklogix.com).
Tämä laite vastaa EU:n radio- ja telepäätelaitedirektiivin (EU R&TTE Directive
1999/5/EC) vaatimuksia. (Julkilausuma nähtävillä osoitteessa:
www.psionteklogix.com).
PSION TEKLOGIX tímto prohlašuje, že 8525 G2/8530 G2 je ve shodě se
základními požadavky a dalšími příslušnými ustanovenímisměrnice
1995/5/ES (NV č. 426/2000 Sb.) a Prohlášení o shodě je k dispozici na
www.PsionTeklogix.com.
Toto zařízení lze provozovat v České republice na základě
generální licence č. GL - 12/R/2000.
PSION TEKLOGIX týmto vyhlasuje, že 8525 G2/8530 G2 spĺňa základné
požiadavky a všetky príslušné ustanovenia Smernice 1995/5/ES
(NV č. 443/2001 Z.z.) a Vyhlásenie o zhode je k dispozícii na
www.PsionTeklogix.com.
Toto zariadenie je možné prevádzkovať v Slovenskej republike
na základe Všeobecného povolenia č. VPR-01/2001.

Use of the 802.11 8525 G2/8530 G2 vehicle-mount in France:
Owing to French Government restrictions, the 802.11 8525 G2/8530 G2 vehiclemounts are limited to indoor use. They may be used outdoors, on private property,
only with prior authorization from the French Ministry of Defense.

FCC Information To Users
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.

VIII

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Approvals And Safety Summary
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.

IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Some equipment in hospitals and aircraft are not shielded from radio frequency
energy. Do not use the 8525 G2/8530 G2 onboard aircraft, or in hospitals, without
first obtaining permission.
Do not use near pacemakers. The product may affect the operation of some
medically implanted devices such as pacemakers, causing them to malfunction.
Avoid placing your product next to such devices. Keep a minimum distance of 20
cm between the device and the product to reduce the risk of interference. If you have
any reason to suspect that interference is taking place, turn off the 8525 G2/8530 G2
and contact your cardiologist for assistance.
Note:

In August 1996 the Federal Communications Commission (FCC) of the
US adopted an updated safety standard for human exposure to radio frequency energy emitted by FCC regulated transmitters. The design of this
product complies with the FCC guidelines and those standards. To maintain compliance with the FCC RF exposure guidelines, ensure the
antenna is at least 20 cm from your body when transmitting.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Approvals And Safety Summary

Emissions Information For Canada
This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations. When using the 802.11 radio option, to prevent
radio interference, this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmit antenna) that is
installed outdoors is subject to licensing.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada. En cas d’utilisation du module radio 802.11,
afin d'éviter toute interférence radio avec le service autorisé, l'appareil doit être
utilisé à l'intérieur, tout en tant éloigné de toute fenêtre afin de garantir le maximum
de protection. Si cet équipement (ou son antenne émettrice) est installé à l'extérieur,
il est alors soumis à licence.

Warnings To Users

RF EXPOSURE
Warning:

To satisfy FCC RF exposure requirements for vehicle mount transmitting devices, a separation distance of 20 centimetres should be
maintained between the antenna of this device and persons during
device operation. To ensure compliance, operations at closer than
this distance is not recommended.

DO NOT REMOVE COVERS OR OPEN ENCLOSURES
To avoid injury, the equipment covers and enclosures should only be
removed by qualified service personnel. Do not operate the equipment
without the covers and enclosures properly installed.

CAUTION
Use of the Vehicle Mount Computer while charging the fork truck battery is
prohibited.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Approvals And Safety Summary

CAUTION
Use of additional wiring and attachments not recommended or sold by the
manufacturer may result in fire, electric shock or personal injury.

CAUTION
If using an AC adaptor, use only the AC adaptor recommended
by manufacturer.

CAUTION
Do not operate the vehicle-mount computer with a damaged cord or plug.
Replace immediately.

CAUTION
Make sure the cord is positioned so that it is not stepped on, tripped over or
otherwise subjected to damage or stress.

CAUTION
An extension cord should not be used unless absolutely necessary. Use of
an improper extension cord could result in fire or electric shock.

CAUTION
To reduce risk of electric shock, unplug the vehicle-mount computer from
the DC source before attempting any maintenance or cleaning.
Warning:

Physically disconnect the 8525 G2/8530 G2 from the vehicle battery
during battery charging (into AC outlet).

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

INTRODUCTION
1.1
1.2
1.3
1.4

.
.
.
.
.
.

.3
.4
.4
.4
.7
.8

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 1: Introduction
About This Manual

1.1 About This Manual
This manual describes how to configure, operate and maintain the Psion Teklogix
8525 G2/8530 G2 vehicle-mount computers.
Chapter 1: Introduction
provides a basic overview of the 8525 G2 and 8530 G2 vehicle-mounts.
Chapter 2: Basic Checkout
describes the steps required to get the 8525 G2/8530 G2 ready for operation.
Chapter 3: Getting To Know The 8525/30 G2
describes the 8525 G2/8530 G2 features and provides a description of the keyboard, how to navigate in Microsoft Windows CE, and so on.
Chapter 4: Working With Windows CE 5.0
describes the Microsoft Windows CE desktop and how to use it. This chapter
also outlines the basics of moving around a Windows CE window, selecting and
opening icons, files, folders and working with a Windows dialog box.
Chapter 5: Configuration
provides a description of the Windows CE Control Panel and how to use it to
configure the 8525 G2/8530 G2, along with the scanners attached to the unit,
and so on.
Chapter 6: Peripheral Devices & Accessories
describes the peripherals and accessories available for your 8525 G2/8530 G2.
Chapter 7: Specifications
details vehicle-mount computer, radio and battery specifications.
Appendix A: Support Services And Worldwide Offices
provides the helpdesk phone number at the Mississauga, Ontario, Canada office
and details the support services available. This appendix also lists the worldwide office addresses and phone numbers.
Appendix B: Port Pinouts
includes 8525 G2/8530 G2 pinouts.
Appendix C: USB Setup Application
describes the USB setup application.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 1: Introduction
Text Conventions

1.2 Text Conventions
Note:

Notes highlight additional, helpful information.

Important:

These statements provide particularly important instructions
or additional information that is critical to the operation of
the equipment.

Warning:

These statements provide critical information that may prevent
physical injury, equipment damage or data loss.

1.3 About The 8525 G2/8530 G2 Vehicle-Mount
The 8525 G2 and 8530 G2 are ruggedized vehicle-mount computers, running the
Microsoft Windows CE operating system. They are intended for use in commercial
and industrial applications with a focus on real time wireless data transactions. A
wide range of data input capabilities are supported through a variety of imager,
RFID and bar code scanner options.

1.4 8525 G2/8530 G2 Features

•

Processor And Memory
- PXA270 @ 520 MHz
- 32KB instruction/32KB data cache
- On-board RAM: 128 MBytes SDRAM
- On-board ROM: 64 MBytes FLASH

•

Operating System
- Windows CE 5.0

•

Programming Environment
- HTML, XML
- Visual Studio and SDK
- Java Virtual Machines
- BSquare JVM

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 1: Introduction
8525 G2/8530 G2 Features

- IBM JVM
Standard protocol APIs
- Windows sockets (WinCE)

•

Wireless Communication
- IEEE 802.11g, 54Mbps 2.4 GHz CF radio
Marvell-88W8300_802.11g_PC_Card (Model #RA2040)
- IEEE 802.11g, 54Mbps 2.4 GHz CF radio
Summit DC-802.11_SC_CF (Model #RA2041)
- External antenna options
- Integrated Bluetooth radio 2.4 GHz (5m range)

•

Application Software
- Internet Explorer 6 for CE – HTML, XML, Jscript (Java available
with optional JVM plug-in)
- Open Tekterm V2.0
- Terminal Emulations
- ANSI, TESS
- IBM 3270, IBM 5250, HP 2392
- 802.11 security software

•

User Interface
Colour Display:
8525 G2
- Transmissive industrial TFT for indoor/sunlight readability
- 1/2 VGA, 640 x 240, 8.8" diagonal
- CCFL Backlight, 220 cd/m2 backlight with brightness control
8530 G2
- Transmissive TFT industrial for indoor/sunlight readability
- SVGA, 800 x 600, 10.4" diagonal
- CCFL Backlight, 350 cd/m2 backlight with brightness control
8530 G2 Freezer Version
- Transmissive TFT industrial for indoor/sunlight readability
- VGA, 640 x 480 10.4" diagonal
- CCFL Backlight, 450 cd/m2 backlight with brightness control
Keyboards:
- 3 keyboard formats available

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 1: Introduction
8525 G2/8530 G2 Features
- ABC
- Qwerty
- Azerty
- 68-key PC like format
- Green EL backlight
- Ergonomic design
- Dedicated function keys
- Epoxy coated elastomeric keys
- 8530 G2 includes a Soft Input Panel along with an external keyboard.
The keypad layout is shared with the 8525 G2.
Touchscreen:
- Passive stylus or finger operation
- Signature capture
- Stylus holder
- Rugged 5-wire technology

•

Indicators and Controls
- Internal 95 dBA beeper with volume control
- Power indicator on the radio dome
- 4 LED indicators: RX/TX, API, SCAN, PWR/CHG

•

Internal Expansion Slots
- One SD I/O (Multimedia Card) slot
- One Type II Compact Flash
- One Type III PC Card slot
- Access to slots via sealed radio dome

•

External Ports
- One Tether port with:
- one RS232 serial port (decoded scanner, printer)
- undecoded scanner port
- USB host port
- One port with:
- DB9 plug RS232 (optional +5V or +12V, 500MA on pin 9)
- One High density port with:
- one RS232 serial comm. port
- 1 USB device port

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 1: Introduction
8525 G2 Vehicle-Mount Computer

- 2 USB host ports
Proprietary Keyboard port for 8530 G2 only

•

Power Management
- Internal power supply 10-90VDC designed for forklift power (pre-regulator no required)
- 12.6 V Li-Ion internal battery for brown-out protection
- 60 minutes operation
- 25 hours data backup
- Built-in fast charger
- 1 week real-time clock backup

•

Network Management
- SNMP MIB 2 support
- Remote software download
- Remote WLAN management
- MapRF
- Mobile Control Centre
- WaveLink Avalanche

1.4.1 8525 G2 Vehicle-Mount Computer

Figure 1.1 8525 G2 With Qwerty Keyboard
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 1: Introduction
8530 G2 Vehicle-Mount Computer & Keyboard

1.4.2 8530 G2 Vehicle-Mount Computer & Keyboard

Figure 1.2 8530 G2 With Keyboard

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

BASIC CHECKOUT
2.1 Preparing The 8525 G2/8530 G2 For Operation . . .
2.2 8525 G2/8530 G2 Safety Instructions . . . . . . . .
2.3 8525 G2/8530 G2 Freezer & Outdoor Guidelines . .
2.3.1 Important Operating Instructions . . . . . . . .
2.4 Switching The 8525 G2 On And Off . . . . . . . . .
2.5 Switching The 8530 G2 On And Off . . . . . . . . .
2.6 Calibrating The Touchscreen . . . . . . . . . . . . .
2.7 Configuring Your IEEE 802.11 Radio . . . . . . . .
2.8 Setting Up Marvell-88W8300 802.11g Radios . . . .
2.8.1 Assigning An IP Address . . . . . . . . . . . .
2.8.2 Name Servers Tab . . . . . . . . . . . . . . .
2.8.3 Advanced Features . . . . . . . . . . . . . . .
2.8.3.1 Rearranging Preferred Networks . . .
2.8.3.2 Deleting A Preferred Network. . . . .
2.8.3.3 Changing Network Properties . . . . .
2.9 Setting Up Summit DC 802.11 SC CF Radios–SCU .
2.9.1 Assigning The IP Address . . . . . . . . . . .
2.9.2 Using The SCU To Connect To The WLAN . .
2.10 SCU Tabs . . . . . . . . . . . . . . . . . . . . . .
2.10.1 Main Tab . . . . . . . . . . . . . . . . . . .
2.10.2 Config Tab. . . . . . . . . . . . . . . . . . .
2.10.2.1 SCU Security Capabilities . . . . . .
2.10.2.2 EAP Credentials . . . . . . . . . . .
2.10.2.3 ThirdPartyConfig . . . . . . . . . . .
2.10.3 Global Settings Tab . . . . . . . . . . . . . .
2.10.4 Status Tab . . . . . . . . . . . . . . . . . . .
2.10.5 Diags Tab . . . . . . . . . . . . . . . . . . .
2.11 Resetting The 8525 G2/8530 G2 Vehicle-Mount . .

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

11
11
12
12
14
14
15
15
15
21
22
23
23
23
23
24
24
24
26
27
28
30
32
32
33
35
35
36

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Preparing The 8525 G2/8530 G2 For Operation

2.1 Preparing The 8525 G2/8530 G2 For Operation

Typically, 8525 G2/8530 G2 vehicle-mounts are configured at the factory and arrive
ready for use. Although the 8525 G2/8530 G2 is equipped with an internal Compact
Flash slot, a PCMCIA slot and SD I/O slot, these slots are not intended for user
modification. If a device needs to be changed or added in these slots, contact
qualified Psion Teklogix personnel. Refer to Appendix A: Support Services And
Worldwide Offices for the service number closest to you.

2.2 8525 G2/8530 G2 Safety Instructions
•
•
•

•

•
•

•
•
•

The cord should be installed in the vehicle so that it is not subjected to
damage or stress.
Use of a power cord that is not recommended or sold by manufacturer may
result in fire, electric shock, or personal injury.
An extension cord should not be used unless absolutely necessary. Use of
an improper extension cord could result in fire or electric shock. If an extension cord must be used, make sure:
• The plug pins on the extension cord are the same number, size, and
shape as those on the adaptor.
• The extension cord is properly wired and in good electrical condition
and that the wire size is larger than 16 AWG.
When the unit is connected to the battery or AC adaptor, the mains power
cord shall comply with National safety regulations of the country where the
equipment is to be used.
Do not use the AC adaptor with a damaged cord or plug. Replace
it immediately.
Do not operate the AC adaptor if it has received a sharp blow, been
dropped, or otherwise damaged in any way; it should be inspected by
qualified service personnel.
Do not disassemble the AC adaptor; it should be repaired by qualified
service personnel. Incorrect reassembly may result in electric shock or fire.
To reduce risk of electric shock, unplug the battery or AC adaptor from the
outlet before attempting any maintenance or cleaning.
Do not expose the 8525 G2/8530 G2 battery or AC adaptor to rain or snow.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
8525 G2/8530 G2 Freezer & Outdoor Guidelines

2.3 8525 G2/8530 G2 Freezer & Outdoor Guidelines
8525 G2/8530 G2 vehicle-mounts are sealed against dust and high-pressure water
jets to the international standard IP66.

2.3.1 Important Operating Instructions
Warning:

IT IS CRITICAL that this information be reviewed and that any
guidelines applicable to your vehicle-mount be strictly followed.

For All Freezer Vehicle-Mounts
•
•

•

•
•

Use vehicle-mounts only in the environments for which they are designed.
All Psion Teklogix freezer vehicle-mounts have built-in heaters where
required to warm internal components. To help maintain the temperature,
units should be switched on before entry into a freezer environment and
should be left connected to vehicle power and running at all times while in a
freezer environment.
When moving between freezer and warm, humid environments, window
condensation or icing on the outside of the display window is a normal
occurrence. Wiping the condensation from the window may help, but the
operator may need to wait until the condensation stops forming before use.
To reduce condensation and frost on vehicle-mount displays, use an antifogging agent once a week or as required.
Contact lubricant and connector caps must be used on all external connectors to maintain a moisture barrier and prevent corrosion during freezer and
outdoor use. On all 8525 G2/8530 G2 vehicle-mount computers, the contact
lubricant –PN 95146 (Nyogel) must be used. Further, the appropriate
contact lubricant should be replaced at least monthly in applications requiring daily or frequent removal of cables. Refer to the table below for connector cap part numbers.

Vehicle-Mount Type

Connector Cap

8525 G2/8530 G2

26-pin DSUB Female

9008295

8525 G2/8530 G2

9-pin DSUB

9008296

8530 G2

26-pin DSUB Male

9008294

Table 2.1 Connector Caps
12

Part Number

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Important Operating Instructions
•

•
•

To prevent condensation when a vehicle-mount is moved from a freezer to a
warmer environment, it is recommended that the computer power be left on
for at least five minutes.
When not in use, vehicle-mount freezer units should be stored in temperatures above 0° C (32° F).
To prevent keyboard keys from freezing up, the keyboard should be
mounted off the horizontal plane. This allows water to run off the keyboard
and prevents it from pooling on the keypad, freezing and finally physically
jamming the keys. Mounting the keyboard off the horizontal plane also prevents water from dripping onto the keypad area.

Backup Battery
The vehicle-mount back up battery capacity is reduced as the operating temperature
cools. The table below provides a general outline of battery capacity based on the
operating temperature. Charging of the back up battery will occur between +5° C
and +45° C.
Note:

If the backup battery temperature is less than +10° C and a brown-out
occurs, the display backlight will switch off in order to maintain vehiclemount operations. The backlight will switch back on when external power
is restored or the battery temperature is above +10° C.

Temperature

Backup Battery
Capacity

-30° C (-22° F)

35%

-20° C (-4° F)

45%

-10° C (14° F)

60%

0° C (32° F)

close to 80%

Table 2.2 Backup Battery Performance
Warning:

Do not install the 8525 G2/8530 G2 in such a way that the power
cable is bent 90 degrees as this may damage the power cable and
power cable strain relief.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Switching The 8525 G2 On And Off

2.4 Switching The 8525 G2 On And Off
•
Note:

Press the [ENTER/ON] key.
If the 8525 G2/8530 G2 is in suspend state, pressing [ENTER/ON]
‘wakes’ the unit from this state. The screen in which you were working
before the computer entered suspend state is displayed.

To switch off the 8525 G2:
• Press the [BLUE] key, and then press the [ENTER/ON] key.
Turning off the 8525 G2/8530 G2 does not result in a complete reboot; rather, the
unit enters a power-saving, “suspend” state. When the 8525 G2/8530 G2 is turned
on from suspend state, operation resumes within a few seconds.
Important:

If the word ‘BLUE’ is displayed in uppercase in the taskbar
at the bottom of the screen, this key is locked ‘on’ – the 8525
G2/8530 G2 will not switch off. Press the [BLUE] key again
to unlock it; then press [BLUE] [ENTER/ON] to switch the
8525 G2 off.
If, however, you’ve disabled the “Blue Key” in the ‘One Shot’
dialog box (see “Keyboard One Shots” on page 89),
the 8525 G2 can be turned off even when the [BLUE] key is
locked ‘on’.

2.5 Switching The 8530 G2 On And Off
•

Press the [ON/OFF] switch on right side of the 8530 G2 to turn the unit on
and off,
or
Press the [ENTER/ON] key on the keyboard to turn on the 8530 G2, and
press [BLUE] [ENTER/ON] to turn off the unit.

Note:

Pressing the 8530 G2 ON/OFF switch or using the [BLUE][ENTER/ON]
key combination does not result in a complete reboot. The unit enters
‘suspend’ state until it is switched on.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Calibrating The Touchscreen

2.6 Calibrating The Touchscreen
Before using your 8525 G2/8530 G2, you will need to calibrate the touchscreen.
Refer to “Calibrating The Touchscreen” on page 45 for details.

2.7 Configuring Your IEEE 802.11 Radio
If your 8525/30 G2 is equipped with a Marvell-88W8300_802.11g_PC_Card
(Model # RA2040), follow the steps outlined under the heading “Setting Up
Marvell-88W8300 802.11g Radios” beginning on page 15.
If your vehicle-mount is equipped with a Summit DC 802.11 SC (Model # RA2041)
CF radio, follow the steps under “Setting Up Summit DC 802.11 SC CF Radios–
SCU” beginning on page 24 to set up this type of radio for communication with a
wireless LAN.

2.8 Setting Up Marvell-88W8300 802.11g Radios
The most common 802.11g settings are configured as defaults. However, there are
some fields that must be completed, including the SSID of your access point and the
security methods implemented in the network (including access keys).
Important:

If the 8525 G2/8530 G2 is equipped with a radio that has never
been configured, the radio settings dialog box opens automatically when the unit is powered on. In this case, skip to Step 4 on
page 17.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Setting Up Marvell-88W8300 802.11g Radios
To configure the 802.11g radio:
1. Press [BLUE][0], and tap on Settings>Network and Dial-up
Connections.

Figure 2.1 Network And Dial-Up Connections
Note:

You can press [CTRL] [ESC] to display the Start Menu.

2. Choose the radio icon to open the Wireless LAN Settings window – in
the sample screen below, this is labelled PTXCF838.

Figure 2.2 Wireless Settings Window

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Setting Up Marvell-88W8300 802.11g Radios
3. Wireless Statistics Tab
When you choose the Wireless LAN icon, a Wireless Statistics
window is displayed.

Figure 2.3 Wireless Statistics
This tab lists your radio statistics. Choosing the Zero button resets the
statistics of the last four items – Packets IN, Packets OUT, IN errors and
OUT errors.
• Tap the stylus on the Wireless Information tab.
4.Wireless Information Tab

Figure 2.4 Wireless Information Tab
This tab displays existing networks to which you can connect, and it allows
you to add a new network or modify the settings for an existing network.
Note:

Connect button – To force connection to a specific, existing network,

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Setting Up Marvell-88W8300 802.11g Radios
highlight the network to which you want your 8525 G2/8530 G2 to connect, and tap the Connect button.
This tab lists available networks – any access points that are broadcasting
an SSID, and it lists preferred networks – networks that you have configured. Since access points are generally secure, they will most likely not
be listed here. By default, the 8525 G2/8530 G2 attempts to connect to preferred networks. This behaviour can be changed by enabling ‘Automatically connect to non-preferred networks’ in the Advanced dialog box
(page 23).
• To add a new configuration, double-tap on the Add New item listed with
the networks. A blank Wireless Properties dialog box is displayed.
5. Wireless Properties

Figure 2.5 Wireless Properties Dialog Box
Network name (SSID):
• Type the appropriate SSID (Service Set Identifier) in the ‘Network
name (SSID):’ text entry field at the top of this dialog box.
The Network name field can contain a maximum of 32 characters. The
name assigned here is listed as a preferred network.
Important: Keep in mind that the 8525 G2/8530 G2 will only communicate
with access points that are configured with the same SSID.
Ad Hoc And Infrastructure
If you are using an “Infrastructure” network – one in which 8525 G2/8530
G2s must pass data through an access point – leave the checkbox next to
‘This is an ad hoc network’ empty.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Setting Up Marvell-88W8300 802.11g Radios
If you are using an Ad Hoc network – a network in which 8525 G2/8530
G2s pass data directly to other 8525 G2/8530 G2s without an access point –
tap on the checkbox next to ‘This is an ad hoc network’ to enable Ad Hoc.
Encryption
WEP (Wired-Equivalent Privacy) encryption prevents others from accidentally accessing your network. If you are not using encryption, you can
choose Disabled from the dropdown encryption menu. Otherwise, leave
this field as is.
Note:

WEP cannot be disabled if you are using WPA or WPA-PSK authentication.
TKIP (Temporal Key Integrity Protocol) is an encryption protocol included
as part of the IEEE 802.11 standard for wireless LANs. Designed to
enhance WEP, TKIP uses the original WEP programming but ‘wraps’ additional code at the beginning and end to encapsulate and modify it, encrypting each data packet with a unique encryption key.
Authentication
802.11 supports a number of subtypes of network authentication services:
Open, Shared, WPA and WPA-PSK.
Using Open authentication, any wireless station can request authentication.
The station that needs to authenticate with another wireless station sends an
authentication management frame that contains the identity of the sending
station. The receiving station then sends back a frame that indicates whether
it recognizes the identity of the sending station.
Using Shared authentication, each wireless station is assumed to have
received a secret shared key over a secure channel that is independent from
the 802.11 wireless network communications channel.
WPA (Wi-Fi Protected Access) uses the Temporal Key Integrity Protocol
(TKIP) to provide strong data encryption, and offers two user authentication and key management methods.
The first method of user authentication is intended for environments using a
centralized Authentication Server, such as RADIUS. User authentication is
based on IEEE 802.1X and mutual authentication based EAP.
In environments where a centralized Authentication Server or EAP framework is not available, user authentication is based on a ‘Pre-Shared Key’
method – WPA-PSK. If you are using Pre-Shared Key authentication, you

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Setting Up Marvell-88W8300 802.11g Radios
will need to manually enter a password (Master Key) in the Access Point or
Wireless Router and enter the same password in each client device that
accesses the wireless network. The manually configured WPA password
(Master Key) automatically starts the TKIP data encryption process.
Network Key:
This text box is used to specify a 5 or 13 ASCII character sequence or an
equivalent 10 or 26 Hexadecimal digit sequence that matches the active
WEP key on the access point.
• To assign a Network key, tap in the checkbox next to ‘The key is provided automatically’ to remove the check mark next to this option.

Tap in this checkbox to remove
the checkmark. This disables this
option, providing access to the
Network Key & Key Index fields.

Figure 2.6 Accessing Network Key And Key Index
Key Index:
This field is used to identify the WEP key.
• Enter a value from 1 to 4.
Enable 802.1x authentication
“802.1X” is the IEEE standard that offers additional security for local area
networks. It provides authentication for user devices attached to an Ethernet
network, whether wired or wireless. A security protocol packet such as TLS
or MD5 encapsulated in an “EAP” is used in conjunction with the “802.1x”
standard to authenticate users at the MAC layer. Available EAPs are listed
in the dropdown menu next to the ‘EAP’ option.
• To activate “802.1X”, tap on the checkbox next to ‘Enable 802.1x
authentication’, and press the [SPACE] key to enable it.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Assigning An IP Address
EAP Type (Extensible Authentication Protocol):
This dropdown menu lists the EAP types available on your system. The
items in this dropdown menu will vary depending on your network setup.
Keep in mind also that some authentication protocols require that you select
a ‘Certificate’. By selecting the Properties button, you will be able to
select a Certificate. “Certificate Assignment” on page 105 provides a
website that outlines how to create certificates for your network.
6. Saving and exiting the radio setup.
Once you have completed your configuration, press [ENTER] or tap
on OK.
The connection you created will be listed in the Wireless Information tab as a
preferred network. The radio will search for the SSID and will compare the WEP
and authentication information you specified. If there is a match between your 8525
G2/8530 G2 settings and the access point settings, the 8525 G2/8530 G2 will
communicate on the network through the access point.

2.8.1 Assigning An IP Address
If your network is not using a DHCP server, you will need to assign an IP address.

Figure 2.7 Configuring An IP Address
Note:

Choosing the Renew button forces the 8525 G2/8530 G2 to renew or find
a new IP address. This is useful if, for example, you are out of communication range for a longer period of time and your 8525 G2/8530 G2 is
dropped from the network.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Name Servers Tab
To define a static IP address:
• Tap the Configure button.

Figure 2.8 Defining An IP Address
•
•

Tap on the radio button next to Specify an IP address.
Tap on each field, and type an IP, Subnet Mask and Default Gateway
address. Tap on OK to save your information.

2.8.2 Name Servers Tab
Note:
•
•

If DHCP is enabled, name server addresses are assigned automatically.
In the IP Information tab, tap on the Configure button. (“Figure 2.8” on
page 22 is the window from which you choose the Configure button.)
Tap on the Name Servers tab.

Figure 2.9 Name Servers Tab
The DNS and WINS fields in the Name Servers tab allow you to specify additional
WINS and DNS resolvers. The format for these fields is ###.###.###.###.
22

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Advanced Features

2.8.3 Advanced Features
To display the Advanced Wireless Settings dialog box:
• Tap the Advanced button in the Wireless Information tab.
This window lists the available preferred networks.

Figure 2.10 Advanced Settings

2.8.3.1

Rearranging Preferred Networks

The 8525 G2/8530 G2 attempts to connect with the networks listed in this dialog
box in sequence, beginning at the top of the list. If you need to rearrange this list of
networks – move networks up and down in the list:
• In the networks list, tap on the network that you want to move up or down in
the list.
• To move the highlighted item upward or downward in the list, tap the Up or
Down button, and press [ENTER].

2.8.3.2

Deleting A Preferred Network

To delete a network from this list:
• Tap on the network in the list to highlight it.
• Tap the Delete button, and press [ENTER].

2.8.3.3

Changing Network Properties

To change the properties of an existing preferred network:
• Highlight the network that you want to modify.
• Tap the Properties button, and press [ENTER].

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Setting Up Summit DC 802.11 SC CF Radios–SCU
•
Note:

Make any necessary changes in the Wireless Properties dialog box, and
press [ENTER] to save the changes.
You do not need to reset your 8525 G2/8530 G2 after configuring
the radio. Summit DC 802.11 SC (Model # RA2041) CF radio

2.9 Setting Up Summit DC 802.11 SC CF Radios–SCU
This section describes the Summit Client Utility (SCU). The SCU provides the
utilities you will need to configure the Summit 802.11g Compact Flash radio
module, model number RA2041, so that it can communicate through a wireless
LAN effectively and securely.

2.9.1 Assigning The IP Address
Before launching the SCU, you need to configure how the IP address will be
obtained.
• Tap on Start>Settings>Network and Dial-up Connections.
Follow the steps under the heading “Assigning An IP Address” on page 21 to
determine how the IP address will be obtained – either via DHCP or by specifying
an address.

2.9.2 Using The SCU To Connect To The WLAN
This section provides a quick set of steps to create a profile (referred to as a config).
Detailed information about each of the SCU tabs – Main, Config, Status, Diags and
Global Settings – is provided under “SCU Tabs” beginning on page 26.
To launch the SCU so that your vehicle-mount can connect to a wireless LAN:
• Tap on Start>Programs>Summit>SCU.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Using The SCU To Connect To The WLAN
•

Tap on the Config tab.

Radio
Attributes

•
•
•
•
•

Tap on the New button to define a new config (profile).
Type a name for your configuration using any alpha-numeric combination
to uniquely identify this config.
Tap on OK to return to the Config tab.
Tap on Commit to save the config name.
When a pop-up message indicates that your configuration will be saved, tap
on OK.

To configure the SSID for the network to which you want to associate:
• Type an SSID in the text box to the right of SSID. This field is limited to 32
characters.
• Tap on Commit and then, in the pop-up message, tap on OK to save your
SSID setting.
Important:

To learn more about the other options available in the radio
attributes list, refer to “Config Tab” beginning on page 28.

To configure authentication:
• Tap on the EAP type dropdown menu, and choose the appropriate type of
authentication – LEAP, EAP-FAST, PEAP-MSCHAP, and PEAP-GTC.
• Next, tap on the Credentials button, and type credentials for IEEE 802.1X
EAP types.
Important:

Refer to “SCU Security Capabilities” on page 30 for details about
security settings. Additional EAP details are described in “EAP
Credentials” on page 32.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
SCU Tabs
To configure encryption:
• Tap on the Encryption dropdown menu, and choose the appropriate type of
encryption – Manual WEP, Auto WEP, WPA PSK, WPA TKIP,
WPA2 PSK, WPA2 AES, and CCKM TKIP.
If you choose Manual WEP, WPA PSK or WPA2 PSK:
• Tap on the WEP/PSK Keys button. For Manual WEP, choose up to four
static WEP keys. For PSK, type an ASCII passphrase or hex PSK.
• Configure any other settings that are supplied by the network administrator
for the SSID to which you will associate.
• Make certain that you tap on Commit following each change.
Once you’ve completed the configuration:
• Tap the Main tab. Tap on the Active Config button – your new config will
be listed in the dropdown menu.
When you tap on the config you created, the Summit DC-802.11_SC_CF (Model
#RA2041) radio module attempts to connect to the network using these steps:
- Associate to the SSID.
- Authenticate to the network.
- If EAP authentication is being used, derive dynamic encryption keys.
- If DHCP is being used by the network, obtain an IP address.

If the Summit DC-802.11_SC_CF (Model #RA2041) is not connecting:
•

Tap on the Status tab.

The Status dialog box lists the IP and MAC address, and indicates the current state of the radio, the signal strength, channel and so on.
You can also use the Status screen for DHCP renewal and ICMP Echo
Requests (Pings).
Important:

For details about the Status dialog box, refer to “Status Tab” on
page 35.

2.10 SCU Tabs
This section provides a detailed description of each of the tabs available in the SCU
– Main, Config, Status, Diags and Global Settings.
26

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Main Tab

2.10.1 Main Tab
The Main tab is displayed when you tap on Start>Programs>Summit>SCU.

•

•
•
•

Enable/Disable Radio: Enables or disables the radio. This a toggle button;
when the radio is enabled, this button reads Disable Radio, and when the
radio is disabled, it reads Enable Radio.
Active Config: Lists the name(s) of the active configuration profile(s)
which are referred to as configs. When a config is chosen from the Active
Config dropdown menu, the settings for that config become active.
If ThirdPartyConfig is selected, after the vehicle-mount goes through a
power cycle, WZC is used for configuration of the radio. See “ThirdPartyConfig” on page 32 for details.
Association Status: Indicates if the radio is associated to an access point. If
this is not the case, Association Status indicates the radio status.
Software Version: This field displays the version of the device driver and
the SCU that are running on the 8525 G2/8530 G2.
About Box: This box provides information about the SCU.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Config Tab

2.10.2 Config Tab
The Config tab allows you to define radio and security settings that are stored in the
registry as part of the configuration profile or config.

Radio
Attributes

The config you create and save is listed in the Active Config dropdown menu in the
Main tab. You can define up to 20 configs.
• Config: Used to choose the config to be viewed or edited. If ThirdPartyConfig is chosen, after the 8525 G2/8530 G2 goes through a power cycle,
WZC is used for configuration of the radio.
• Rename: Allows you to assign a config name.
• Delete: Deletes the config unless it is currently active.
• New: Allows you to create a new config with default settings and assign it
a name.
• Commit: Saves all changes.
• Radio Attributes: Lists radio attributes. These attributes can be individually chosen from this menu. When an attribute is chosen, an associated
list of options is displayed where you can assign new settings or view
existing settings.
The following table describes the options in the Radio Attributes dropdown menu:

Radio
Attribute

Description

Value

Default

Config

Name of config (configuration profile). Use Rename
button to change name.

Maximum of 32 characters.

None

SSID

Service set identifier (SSID)
for WLAN to which the radio Maximum of 32 characters.
connects.

None

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Config Tab

Radio
Attribute

Description

Value

Default

Name assigned to radio &
Client Name vehicle-mount into which it
is installed.

Maximum of 16 characters.

None

Power Save

Power save mode for radio.

CAM: Constantly awake.
Maximum: Maximum power
savings.
Fast: Fast power save mode.

Fast

Tx Power

Maximum transmit power.

Max: Maximum defined for
current regulatory domain.
Max
Measured in mW: 50,30,10, 1.

Bit Rate

Auto: Rate automatically
Used by radio when interact- negotiated with access point.
ing with WLAN access point. Rates in Mbps: 1, 2, 5.5, 6.9
11, 12, 18, 24, 36, 48, 54.

Auto

Radio Mode

Used by 802.11g when interacting with access point.

B rates only: 1, 2, 5.5, & 11
Mbps.
G rates only: 6, 9, 12, 18, 24,
36, 48, and 54 Mbps.
BG rates full: All B and G
rates.
BG rates optimized: 1, 2, 5.5,
6, 11, 24, 36 & 54 Mbps.

Auth Type

802.11 authentication type
used when associating with
access point.

Open, shared-key, or LEAP
(Network-EAP).

Open

EAP Type

Extensible Authentication
Protocol type used for
802.1X authentication to
access point.

None, LEAP, EAP-FAST,
PEAP-MSCHAP
– To use EAP-TLS, you must
use WZC.

None

BG rates
optimized

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
SCU Security Capabilities

Radio
Attribute

Description
Authentication credentials
for the selected EAP type.

Credentials
Refer to “EAP Credentials”
on page 32.

Encryption

•

Type of encryption used to
protect transmitted data.

Value

Default

User: Username or
Domain/Username (up to 64
characters).
None
Password: up to 64 characters.
For PEAP: CA Cert–CA
server certificate filename.
Off, Manual WEP, Auto WEP
(generated during EAP
authentication), WPA-PSK,
WPA-TKIP, WPA2-PSK,
WPA2-TKIP, WPA2-AES,
CCKM-TKIP.
For Manual WEP: Up to four
static WEP keys.
For PSK: ASCII passphrase or
hex PSK.

None

EAP-Type & Encryption: Security settings. These settings allow you to
enhance the security of data across the wireless LAN. Refer to “EAP Credentials” on page 32 and “SCU Security Capabilities” on page 30 for
details about these settings.

2.10.2.1 SCU Security Capabilities
The SCU provides integrated security to protect transmitted data as well as the
vehicle-mount and wireless WAN infrastructure that transmit and receive data.
A foundational element of the IEEE 802.11i WLAN security standard is IEEE
802.1X and a critical application on a mobile device is an 802.1X supplicant. This
supplicant provides an interface between the radio and the operating system and
supports the authentication and encryption elements required for 802.11i, also
known as Wi-Fi Protected Access 2 (WPA2), as well as predecessors such as WPA
and WEP. Summit software includes an integrated supplicant that supports a broad
range of security capabilities, including:
• 802.1X authentication using pre-shared keys or an EAP type, required for
WPA2 and WPA.
• Data encryption and decryption using WPA2 AES, WPA TKIP or WEP.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
SCU Security Capabilities
Common EAP types include:
• EAP-TLS: Uses the same technology as a follow-on to Secure Socket
Layer (SSL). It provides strong security, but relies on client certificates for
user authentication.
• PEAP: Provides secure user authentication by using a TLS tunnel to
encrypt EAP traffic. Two different inner methods are used with PEAP:
• EAP-MSCHAPV2, resulting in PEAP-MSCHAP: This is appropriate
for use against Windows Active Directory and domains.
• EAP-GTC, resulting in PEAP-GTC: This is for authentication with onetime passwords (OTPs) against OTP databases such as SecureID.
• LEAP: Is an authentication method for use with Cisco WLAN access
points. LEAP does not require the use of server or client certificates. LEAP
supports Windows Active Directory and domains but requires the use of
strong passwords to avoid vulnerability to offline dictionary attacks.
• EAP-FAST: Is a successor to LEAP and does not require strong passwords
to protect against offline dictionary attacks. Like LEAP, EAP-FAST does
not require the use of server or client certificates and supports Windows
Active Directory and domains.
Note:

PEAP and EAP-TLS require the use of Windows facilities for the configuration of digital certificates.

SCU EAP Types
The following EAP types are supported by the integrated supplicant and can be
configured in SCU: PEAP-MSCHAP, PEAP-GTC, LEAP and EAP-FAST. With
each of these four types, if authentication credentials are not stored in the config,
you will be prompted to enter credentials the first time the radio attempts to
associate to an access point that supports 802.1X (EAP).
Consider the following when configuring one of the EAP types:
• PEAP-GTC: SCU supports static (login) passwords only.
• LEAP: Strong passwords are recommended.
• EAP-FAST: SCU supports automatic, not manual, PAC provisioning.
EAP-TLS will work with a Summit DC-802.11_SC_CF (Model #RA2041) radio
module when Windows Zero Config (WZC) rather than the SCU is used to configure
the type. With WZC, the native Windows supplicant instead of the SCU integrated
supplicant is used.
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
EAP Credentials

2.10.2.2 EAP Credentials
Keep the following in mind when defining security settings:
• If the credentials specified in the config are incorrect and that config is used,
the authentication fails without an error message; you will not be prompted
to enter correct credentials.
• If the credentials are not specified in the config, when the radio tries to associate using that config, you will be prompted to enter the credentials.
• When prompted, you can enter valid credentials, enter invalid credentials,
or cancel the operation.
• If you enter valid credentials and tap OK, the radio will associate and
authenticate.
• If you enter invalid credentials and tap on OK, the radio will associate
but will not authenticate; you will be prompted again to enter credentials.
• If you tap on Cancel or clear the credentials fields and tap on OK, the
radio will not attempt to associate with that config until you perform
one of the following actions (while the config is the active config):
• Cause the vehicle-mount to go through a power cycle or suspend/resume.
• Disable and enable the radio, or tap the Reconnect button on the
Diags windows.
• Modify the config, and tap on Commit.
Alternatively, you can choose another config as the active config and then switch
back to the config for which EAP authentication was cancelled.

2.10.2.3 ThirdPartyConfig
If you choose to configure ThirdPartyConfig, the SCU will work with the operating
system’s Windows Zero Config (WZC) to configure radio and security settings for
the CF radio installed in the unit.
Choosing this config means that WZC must be used to define the following radio
and security options: SSID, Auth Type, EAP Type and Encryption.The SCU settings
for ThirdPartyConfig include: Client Name, Power Save, Tx Power, Bit Rate and
Radio Mode. These SCU settings along with SCU global settings and the WZC
settings will be applied to the radio module.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Global Settings Tab

2.10.3 Global Settings Tab
The Global Settings tab allows you to define radio and security settings that apply to
all configs (profiles), along with settings that apply specifically to the SCU.

The Global Settings outlined in the table below can be edited in the SCU:

Global Setting

Description

Value

Default

CCX features

Activates three CCX features:
AP-assisted roaming, AP-speciOn, Off
fied maximum transmit power &
radio management.

Cert Path

Directory where certificates for
EAP authentication are stored.

Valid directory path up Dependent
to 64 characters.
on device.

Frag Thresh

Packet is fragmented when
packet size (in bytes) exceeds
threshold.

Integer from 256 to
2346.

2346

G Shortslot

802.11g short slot timing mode.

Off

Auto, Off, On

Auto

On - SCU as well as EAP
authentication dialog boxes hide
Hide Passwords
passwords, WEP keys and other
sensitive information.

On, Off

Off

LED

Available only with MCF10G.

On, Off

Off

Preamble

Type of radio preamble or headAuto, Short, Long
ers.

Auto

Ping Payload

Amount of data to be transmitted on a ping.

Bytes: 32, 64, 128,
256, 512 & 1024

Ping Timeout
ms

Amount of time in milliseconds
that passes without a response
before ping request is considered a failure.

Integer from 0 to
30000.

5000

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Global Settings Tab

Global Setting

Description

Amount of time in milliseconds
Ping Delays ms between successive ping
requests.

Value
Integer from 0 to
7200000.

Default
1000

Roam Delta

Amount by which second AP’s
RSSI must exceed the moving
average RSSI for the current AP
before the radio will attempt to
roam to a second AP.

dBm: 5, 10, 15, 20, 25,
15
30, 35

Roam Period

Following an association or
roam scan (with no roam), the
number of seconds the radio
collects RSSI scan data before
considering roaming.

Seconds: 5, 10, 15, 20,
25, 30, 35, 40, 45, 50,
55, 60

Roam Trigger

If RSSI from AP is less than
roam trigger value, radio performs roam scan or probes for
an AP with stronger signal.

dBm: -50, -55, -60,
-65, -70, -75

-70

RTS Thresh

Packet size above which
RTS/CTS is required on link.

An integer from 0 to
2347.

2347

RX Diversity

Defines how to handle antenna
diversity when receiving data
from AP.

-On-Start on Main: On
startup, use main
antenna.
-On-Start on Aux: On
On-Start on
startup, use auxiliary
Main
antenna.
-Main only: Use main
antenna only.
-Aux only: Use auxiliary antenna only.

TX Diversity

Defines how to handle antenna
diversity when transmitting data
to AP.

-Main only: Use main
antenna only.
-Aux only: Use auxiliary antenna only.
-On: Use diversity.

WMM

Use Wi-Fi Multimedia Extensions, also know as WMM.

On, Off

Off

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Status Tab

2.10.4 Status Tab

The Status tab provides status information including IP address and MAC address
for the client radio, IP address and MAC address for the AP, signal strength,
channel, transmit power and data rate.

2.10.5 Diags Tab

Ping Address
Ping Results

Use the Diags tab as a troubleshooting tool. The functions are as follows:
• (Re)Connect: Enables/Disables the radio, applies/reapplies current config
and tries to associate and authenticate to the wireless LAN, logging all
activity in the output area at bottom of the dialog box.
• Release/Renew: Obtains a new IP address through DHCP and logs all
activity in the output area.
• Start Ping/Stop Ping: Starts a continuous ping to the address in the text
box next to this button. This a toggle button so when you tap on it, it
changes to Stop Ping. Closing this window or tapping on another button
also stops the ping.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 2: Basic Checkout
Resetting The 8525 G2/8530 G2 Vehicle-Mount
•

Diagnostics: Attempts to connect or reconnect to an AP, and provides a
more detailed dump of data than if you used (Re)connect. The dump
includes the radio state, config settings, global settings and BSSID list
of APs. The SCU is saved to a file called _sdc_diag.txt in the Windows
directory.

2.11 Resetting The 8525 G2/8530 G2 Vehicle-Mount
Warm Reset
To execute a warm reset:
• Press and hold down the [BLUE] key and the [ENTER/ON] key simultaneously for a minimum of six seconds.
A warm reset closes open applications; any unsaved data are lost. Installed
programs and saved data are preserved.
Note:

You do not need to reset your 8525 G2/8530 G2 after configuring the radio.

Cold Reset
There are two options when executing a cold reset: reset to BootLoader or reset
directly to Windows CE operating system.
To execute a cold reset and access the BooSt menu:
• Press and hold down the left [BLUE] key, the [ENTER] key and the
[SPACE] key simultaneously for a minimum of six seconds.
After a cold reset, the BooSt menu appears.
• If you want to load the Windows CE operating system, type 1.
• If you want a clean start, press ! (that is, [SHIFT] [1]). All data and settings
are lost. Files and data stored in flash are preserved.
Once the OS loads, any executables and cab files in the startup folders are run. The
cab files are deleted by the cab file installer unless they are marked read-only.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

GETTING TO KNOW THE 8525/30 G2
3.1 Features Of The 8525 G2/8530 G2 . . . . . . . . . . . .
3.2 The Internal Backup Battery . . . . . . . . . . . . . . .
3.3 The Keyboard . . . . . . . . . . . . . . . . . . . . . . .
3.3.1 Modifier Keys . . . . . . . . . . . . . . . . . . .
3.3.1.1 Activating Modifier Keys . . . . . . . . .
3.3.1.2 Locking Modifier Keys . . . . . . . . . .
3.3.2 The Keys . . . . . . . . . . . . . . . . . . . . . .
3.4 Function Keys And Macro Keys . . . . . . . . . . . . .
3.4.1 Function Keys . . . . . . . . . . . . . . . . . . .
3.4.2 Macro Keys . . . . . . . . . . . . . . . . . . . . .
3.4.3 The Keypad Backlight . . . . . . . . . . . . . . .
3.5 The Display . . . . . . . . . . . . . . . . . . . . . . . .
3.5.1 Calibrating The Touchscreen . . . . . . . . . . . .
3.6 8525 G2/8530 G2 Indicators . . . . . . . . . . . . . . .
3.6.1 Power Indicator LED . . . . . . . . . . . . . . . .
3.6.2 LEDs . . . . . . . . . . . . . . . . . . . . . . . .
3.6.2.1 PWR/CHG – Charge LED. . . . . . . . .
3.6.2.2 RX/TX – Radio Traffic LED . . . . . . .
3.6.2.3 Scan LED . . . . . . . . . . . . . . . . .
3.6.2.4 API – User Application LED . . . . . . .
3.6.3 Onscreen Indicators. . . . . . . . . . . . . . . . .
3.6.4 Audio Indicators . . . . . . . . . . . . . . . . . .
3.7 Scanning. . . . . . . . . . . . . . . . . . . . . . . . . .
3.7.1 Scanning Techniques . . . . . . . . . . . . . . . .
3.7.2 Scan LED Indicators . . . . . . . . . . . . . . . .
3.7.3 Troubleshooting. . . . . . . . . . . . . . . . . . .
3.7.4 Operating One Dimensional (1D) Laser Scanners .
3.7.5 Operating PDF Laser Scanners . . . . . . . . . . .
3.8 Connecting & Disconnecting Tethered Peripherals. . . .
3.9 Monitoring The Network Connection. . . . . . . . . . .
3.10 Connecting An 8525 G2/8530 G2 To A PC . . . . . . .
3.10.1 Using Microsoft ActiveSync To Work With Files
3.11 General Maintenance . . . . . . . . . . . . . . . . . .

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

39
41
41
41
42
42
42
44
44
44
45
45
45
46
46
47
47
48
48
48
48
51
51
52
52
53
53
54
54
55
55
56
56

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2

3.11.1 Caring For The Touchscreen . . . . . . . . . . . . . . . . . . . . . 56
3.11.2 Cleaning The 8525 G2/8530 G2 . . . . . . . . . . . . . . . . . . . 57

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
Features Of The 8525 G2/8530 G2

3.1 Features Of The 8525 G2/8530 G2
The 8525 G2 and 8530 G2 vehicle-mounts share the same radio dome with
identical features.

Inside The Radio Dome
- SDIO/MMC Slot – for additional storage memory
- PCMCIA slot - supports 2-Type II PCMCIA or 1-Type III PCMCIA card
- Compact Flash slot - for 802.11g radios or additional storage memory
Radio Dome

Figure 3.1 Front Of 8525 G2

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
Features Of The 8525 G2/8530 G2

Tether Port

Auxiliary Port
RS232 Serial Port

Figure 3.2 8525 G2 Ports

Keyboard Port

Auxiliary Port

RS232 Serial Port

Figure 3.3 8530 G2 Ports

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Tether Port

Chapter 3: Getting To Know The 8525/30 G2
The Internal Backup Battery

Keyboard Port

Figure 3.4 8530 G2 Keyboard Port

3.2 The Internal Backup Battery

The 8525 G2/8530 G2 vehicle-mount is equipped with an internal battery that will
provide backup power to the unit for up to fifteen minutes of normal operation.
After 15 minutes, the unit will shut off to preserve the contents of RAM.
The backup battery is not user accessible. It must be replaced by authorized Psion
Teklogix personnel.

3.3 The Keyboard
The 8525 G2/8530 G2 offers three keyboard layouts – Qwerty, ABC and Azerty.
The 8530 G2 is equipped with an external keyboard offering the same layouts as the
8525 G2 vehicle-mount.
Most of the keys on these keyboards operate much like a desktop computer. If a key
or key function is not consistent with the PC keyboard, the differences are noted.
Note:

On the 8530 G2, a soft keyboard that is an exact replica of the external
keyboard is available. Refer to “Input Panel” on page 134 for details.

3.3.1 Modifier Keys
The [SHIFT], [CTRL], [ALT], [BLUE] ad [ORANGE] keys are modifier keys.
Pressing a modifier key changes the function of the next key pressed. For example, a
square bracket is printed in orange print above the [4] key. Pressing the [ORANGE]
key followed by the [4] key displays a square bracket rather than the number 4.
The [SHIFT], [CTRL] and [ALT] keys operate much like a desktop keyboard except
that they are not chorded (two keys held down simultaneously). The modifier key
must be pressed first followed by the key whose function you want modified.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
Activating Modifier Keys

3.3.1.1

Activating Modifier Keys

When a modifier key is pressed once, it is displayed in lowercase letters in the
taskbar at the bottom of the 8525 G2/8530 G2 screen. For example, if the [CTRL]
key is pressed, ctrl key is displayed at the bottom of the unit screen. Once another key
is pressed, the modifier key becomes inactive and disappears from the taskbar.

3.3.1.2

Locking Modifier Keys

When a modifier key is pressed twice, it is ‘locked’ on. A ‘locked’ modifier key is
displayed in uppercase letters in the taskbar. For example, pressing the [BLUE] key
twice locks it on – it is displayed as BLUE KEY in the taskbar at the bottom of the
computer screen.
The locked modifier key will remain active until it is pressed a third time to unlock
or turn it off. Once a modifier key is unlocked (pressed a third time), the uppercase
representation at the bottom of the screen is no longer displayed.
Note:

The locking function of modifier keys can be disabled so that pressing a
modifier key once will lock the key ‘on’. If you disable the ‘One Shot’
function of these keys, pressing a modifier key once will lock it ‘on’.
Pressing the same key a second time will unlock or turn it ‘off’. Refer to
“Keyboard One Shots” on page 89 for details.

3.3.2 The Keys
The [BLUE] And [ORANGE] Keys
The [BLUE] and [ORANGE] modifier keys provide access to additional symbols
and keys. These additional symbols and keys are colour coded in blue and orange
print above the keyboard keys.
Press the [BLUE] key to access functions or characters displayed in blue print on the
keyboard. Press the [ORANGE] key to access functions or characters displayed in
orange print on the keyboard.

The [SHIFT/CAPS] Key
The [SHIFT/CAPS] key is used to display uppercase alpha characters. Pressing
[BLUE][SHIFT] turns the [CAPS] key on so that all alpha characters are printed in
uppercase until the [BLUE][SHIFT] sequence is pressed again.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
The Keys

The Arrow Keys
The Arrow keys move the cursor around the screen in the direction of the arrow –
up, down, left and right. The cursor is the flashing box or underline character that
indicates where the next character you type will appear.

The [INS] Key
The [INS] key inserts a character at the cursor position.

The [DEL] Key
The [DEL] key erases the character at the cursor position.

The [BKSP] Key
The [BKSP] key (sometimes referred to as destructive backspace) moves the cursor
one character to the left, erasing the incorrectly entered key stroke.

The [CTRL] And [ALT] Key
The [CTRL] and [ALT] keys modify the function of the next key pressed and are
application dependent.

The [TAB] Key
Typically, the [TAB] key moves the cursor to the next field to the right or
downward.

The [ESC] Key
Generally, this key is used as a keyboard shortcut to close the current menu, dialog
box or activity and return to the previous one.

The [SPACE] Key
Pressing this key inserts a blank space between characters. In a Windows dialog
box, pressing the [SPACE] key enables or disables a checkbox.

The [HOME] Key
The [HOME] key moves the cursor to the top of the form or page.

The [END] Key
The [END] key moves the cursor to the bottom of the form or page.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
Function Keys And Macro Keys

The [PgUp] And [PgDn] Keys
The [PgUp] key displays the previous screen of information. The [PgDn] key
displays the next screen of information.

3.4 Function Keys And Macro Keys
In addition to the standard keyboard functions (see “The Keyboard” on page 41),
vehicle-mounts are equipped with function keys and macro keys.

3.4.1 Function Keys
The 8525 G2/8530 G2 is equipped with a series of function keys each of which is
defined in the application software.

Accessing Function Keys [F1] to [F10]
Function keys [F1] to [F10] can be directly accessed by pressing the function keys
labelled in yellow along the top of the keyboard. No key combination is required.

Accessing Function Keys [F11] To [F20]
These keys are labelled in orange in the top-left corner of the function keys. To
access these keys, press the [ORANGE] key followed by [F1] to [F10].
• To access function key [F11], press the [ORANGE] key followed
by [F1].
•

Press [ORANGE] [F2] to access function key [F12], and so on.

Accessing Function Keys [F21] To [F30]
These keys are labelled in blue in the top-right corner of the function keys. To access
these keys, press the [BLUE] key followed by [F1] to [F10].
• To access function key [F21], press the [BLUE] key followed by [F1].
•

Press [BLUE] [F2] to access Function key [F22], and so on.

3.4.2 Macro Keys
Important:

Refer to “Keyboard Macro Keys” on page 91 for details about
creating macros.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
The Keypad Backlight
8525 G2/8530 G2 vehicle-mounts are equipped with a twelve macro keys that can
be programmed to replace frequently used keystrokes, along with the function of
executable keys like the [ENTER] key, the [BKSP] key, any function key and arrow
key, and so on.

Macro Keys [M1] To [M12]
These keys are displayed in blue print across the top row of alpha keys and the first
two alpha keys in the second row on the keyboard.
To access a macro key, press the [BLUE] key followed by the appropriate alpha key.
For example, on a Qwerty keyboard:
• Press [BLUE] [Q] to access macro key [M1].
•

To access [M2], press [BLUE] [W], and so on.

3.4.3 The Keypad Backlight
The intensity of the keypad backlight and the conditions under which this backlight
is activated can be configured using the Keyboard icon in the Windows CE Control
Panel. The behaviour of the keypad backlight is tailored in the Keyboard Properties
dialog box.
Note:

Refer to “Keyboard Backlight” on page 89 for details about this option.
Keep in mind that this option may be restricted to supervisory use only.

3.5 The Display

8525 G2/8530 G2s are equipped with display backlighting to improve character
visibility in low light conditions. The backlight switches on when a key is pressed or
the touchscreen is tapped. The backlight intensity and the duration of time that the
backlight will remain at full intensity can be specified in the Display Properties
dialog box in the Windows CE Control Panel.
Note:

Refer to “Display Backlight” on page 86 for details about the Display
Properties dialog box.

3.5.1 Calibrating The Touchscreen

If your 8525 G2/8530 G2 touchscreen has never been calibrated or if you find that
the stylus pointer is not accurate when you tap on an item, use the Stylus Properties
dialog box in the Windows CE Control Panel to recalibrate the screen.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
8525 G2/8530 G2 Indicators
•

In the Control Panel, choose the Stylus icon to display the Stylus Properties window.

Figure 3.5 Stylus Icon
•

Choose the Calibration tab, and then tap on the Recalibrate button.

•

Follow the directions on the calibration screen to calibrate the screen.

3.6 8525 G2/8530 G2 Indicators

8525 G2/8530 G2s use LEDs (Light Emitting Diode), onscreen messages and audio
tones as indicators. The vehicle-mount is also equipped with a power indicator LED.

3.6.1 Power Indicator LED
A power indicator LED is located in the radio dome at the top of the unit. When the
vehicle-mount is receiving power either from a battery or an external source, the
blue power indicator LED is illuminated.
Note:

Keep in mind that even when the power indicator LED is illuminated,
if the battery voltage is below 10.0V, you will not be able to turn the
vehicle-mount on.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
LEDs

3.6.2 LEDs
The 8525 G2/8530 G2 is equipped with four tri-coloured LEDs located in the
upper-right corner of the keyboard. If you have an 8530 G2 and are using the
onscreen, soft keyboard, only the API and Rx/Tx LEDs are available in the taskbar.
Important:

You should proceed cautiously if a LED is illuminated in red; this
generally indicates an abnormal operating condition or an active
laser emission.

LEDs

Figure 3.6 Keyboard LEDs

3.6.2.1

PWR/CHG – Charge LED

The lower-right LED is reserved for internal charger/power status. This LED
operates as follows:

LED Behaviour

Description

Solid green
Slow flashing green

External power in use. Backup battery is present.
External power in use. Backup battery not present.
External power not in use. Unit drawing power
from backup battery.

Blinking yellow

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
RX/TX – Radio Traffic LED

3.6.2.2

RX/TX – Radio Traffic LED

The upper-left LED on your 8525 G2/8530 G2 flashes either yellow or green to
indicate when the radio transmits and receives data.
Note:

Keep in mind that while the standard 802.11g radio supports the transmit/receive LED, not all radios support this function.

Function
Radio Transmit
Radio Receive

3.6.2.3

Radio Traffic LED Behaviour
LED flashes yellow.
LED flashes green.

Scan LED

Successful scans are indicated in two ways – with a scan LED and with an audio tone.

Function
Scan in progress
Successful scan
Unsuccessful scan

3.6.2.4

Scan LED Behaviour
LED displays solid red during scan.
LED displays solid green after decode.
Off when scan ended.
LED flashes red.

API – User Application LED

This indicator is available for user-loaded custom Windows CE applications.
Neither Windows CE nor Tekterm use this LED. Your supervisor will be able to
describe how this LED behaves with your application.

3.6.3 Onscreen Indicators
The taskbar at the bottom of the screen displays a variety of system status indicators.

Figure 3.7 Taskbar
48

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
Onscreen Indicators
The taskbar changes dynamically, and only those icons that are applicable are
displayed. For example, if a radio is not installed in your 8525 G2/8530 G2, the
radio signal icon is not displayed in the taskbar.

Windows Start Button
You can display the Start Menu by tapping on the Start button in the taskbar.

Modifier Key Indicators
[SHIFT], [CTRL], [ALT], [BLUE] and [ORANGE] are modifier keys that have
onscreen indicators to show when a key is active or locked. If a modifier key is
pressed once to activate it, the key is displayed in the taskbar in lowercase characters
– for example, pressing the [BLUE] key once displays blue key in the taskbar. If a
modifier key is pressed twice, it is ‘locked on’ and the onscreen indicator is
displayed in uppercase letters in the taskbar – for example, pressing [BLUE] twice
displays BLUE KEY in the taskbar.

802.11 Radio Signal Quality
Increasing radio signal quality is represented by longer, filled bars within this icon.

Good
Reception

Weak
Reception

No Radio
Link

Narrow Band Radio Signal Quality
Increasing radio signal quality is represented by longer, filled bars within this icon.

Weak
Good
No Radio
Reception
Reception
Link
The radio signal is determined when the 8525 G2/8530 G2 receives a message. If
the unit receives no messages within a second, the “no signal” icon is displayed. The
signal strength icon shows the following cases: No signal, 1% to 25% bar, 26% to
50% bar, 51% to 75% bar and 75% to 100% bar.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
Onscreen Indicators

Link Status
The Narrow Band radio displays one of three link state icons. An uppercase ‘LINK’
with a green background indicates the radio is powered on and that the unit is online
and locked onto a channel. A lowercase ‘Link’ with a yellow background indicates
that the radio is powered on but the 8525 G2/8530 G2 is not online or not locked
onto a channel. A lowercase ‘Link’ with a yellow background and a red ‘X’ through
it indicates that the radio is not powered on, is not online and is not locked onto
a channel.

Bluetooth Radio
This icon represents the Bluetooth radio installed in your 8525 G2/8530 G2.

Security Level
Security levels can be set to limit user access to 8525 G2/8530 G2 settings. In
addition, applications can be restricted to prevent inadvertent changes.

Battery Icons
Battery In Use
This icon indicates that the 8525 G2/8530 G2 is drawing power from the backup
battery rather than external DC power.

Battery Very Low
When the 8525 G2/8530 G2 is running on the backup battery (rather than external
power) and the battery power is nearly depleted, this icon is displayed in the taskbar.

Battery Charging
This battery icon indicates that the vehicle-mount is running on external DC power,
and that the backup battery is present.

External DC Power
This external DC power icon is displayed in the taskbar when the unit is using
external DC power and the backup battery is not present.
50

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
Audio Indicators

Onscreen LEDs (8530 G2 Only)
When the 8530 G2 keyboard is removed, two onscreen-LEDs are displayed in the
taskbar. The LED to the left acts as the API indicator, and the LED to the right acts
as the TX/RX (transmit and receive) indicator.
These onscreen LEDs behave in the same way as those on the keyboard, changing
colour to indicate different operations. For details about LED behaviour, refer to
“RX/TX – Radio Traffic LED” and “API – User Application LED” on page 48.

Tethered Devices
When a peripheral is attached to the tether port and activated, an associated icon
appears in the taskbar.

Scanner

USB Device

RFID

Serial Device

3.6.4 Audio Indicators
Note:

Care must be taken when routing cabling to the external port because
audio volume can be adversely affected if these cables block the beeper.

The 8525 G2/8530 G2 beeper provides a variety of sounds and can be configured to
emit a sound when a key is pressed, a keyboard character is rejected, scan input is
accepted or rejected or an operator’s entry does not match in a match field.
Note:

Refer to “Volume And Sound Properties” on page 96 for details about
the Volume & Sound Properties dialog box.

3.7 Scanning
Non-decoded scanners are configured using the Scanner Properties dialog box in the
Control Panel.
Note:

Refer to “Scanner Properties Setup” on page 137 for details.

Decoded scanners must be configured by scanning special configuration bar codes.
In these cases, the scanner manufacturer provides programming manuals for configuration purposes.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
Scanning Techniques
The 8525 G2/8530 G2 supports a variety of one dimensional (1D) and two
dimensional (2D) laser scanners.
“Scanning Techniques” outlines the mechanics of a successful scan. In addition,
review “Scan LED Indicators” on page 52 to better understand how to interpret
whether or not a bar code has been successfully scanned. Finally, “Troubleshooting”
on page 53 provides some helpful suggestions should the scan fail.

3.7.1 Scanning Techniques
Note:
•
•

•

•
•
•
•

External scanners can be connected to the 8525 G2/8530 G2 tether, serial
or USB device port.
Hold the scanner at an angle. Do not hold it perpendicular to the bar code.
Do not hold the scanner directly over the bar code. In this position,
light can reflect back into the scanner’s exit window and prevent a
successful decode.
Scan the entire bar code. If you are using a 1D or 2D scanner, make certain
that the scan beam crosses every bar and space on the bar code, including
the margins on either end of the symbol.
If you are using a 2D imaging scanner, make certain the red, oval-shaped
framing mark is centered within the bar code you want to scan.
When using imaging scanners, do not move the scanner while decoding the
bar code. Movement blurs the image.
Hold the scanner farther away for larger bar codes.
Hold the scanner closer for bar codes with bars that are close together.

3.7.2 Scan LED Indicators
The 8525 G2/8530 G2 scanner LED (the upper-right LED) indicates whether or
not your scan is successful. Keep in mind that scan indicators only function when
using a non-decoded, 1D laser scanner connected to the tether port. All other
external scanners have integrated LED indicators that are not controlled by the
8525 G2/8530 G2.
The LED behaves as follows:
• Scan In Progress: scan LED displays solid red colour.
• Successful Scan: scan LED displays solid green colour and turns off when
the scan is ended.
• Unsuccessful scan: scan LED flashes red.
52

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
Troubleshooting
A bar code icon appears on the screen during a scan. While the scanner beam is
active, the onscreen message states – SCANNING. If the scan is successful, the bar
code data is displayed on the screen until the scan trigger is released.

3.7.3 Troubleshooting
If the scanner is not working, investigate the following:
• Is the 8525 G2/8530 G2 on?
• Check that the bar code symbology being scanned is enabled for the 8525
G2/8530 G2 you are using. Check any other parameters that affect the scanning procedure or the bar code.
• Check the bar code to make sure it is not damaged. Try scanning a different
bar code to verify that the problem is not with the bar code.
• Check that the bar code is within the proper range.
• Does the vehicle-mount display the warning without scanning? This suggests a hardware problem in the 8525 G2/8530 G2.
• Is the laser beam scanning across the bar code?
• Once the scan beam has stopped, check the scanner window for
dirt or fogging.

3.7.4 Operating One Dimensional (1D) Laser Scanners
•

Turn the 8525 G2/8530 G2 on. Wait until the unit has booted
up completely.

Important:

•

If an aiming dot is available on the scanner, the dot will be
enabled for a configurable time period (including off), after
which normal scanning begins. Refer to “Dot Time (msec)” on
page 139 for details.
Double-clicking the trigger will override the aiming delay and
initiate an immediate scan. Note that the aiming dot is standard
on long-range and high visibility internal scanners.

Aim at the bar code and press the trigger. A scan beam and a warning
indicator appear until a successful decode is achieved or six seconds
have elapsed.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
Operating PDF Laser Scanners

3.7.5 Operating PDF Laser Scanners
This scanner decodes PDF417 two-dimensional bar codes.
• Turn the vehicle-mount on. Wait until the unit has booted up completely.
• Aim at the bar code and press the trigger. The beam expands into a rectangle covering the bar code to properly scan it. The scan beam and a warning
indicator are visible until a successful decode is achieved or three seconds
have elapsed.

3.8 Connecting & Disconnecting Tethered Peripherals
Tethered peripherals such as imagers, RFID readers, scanners and/or printers
connect to the vehicle-mount computer with a quick release, circular connector.
For most peripherals, when they are connected to the vehicle-mount, the
8525 G2/8530 G2 detects them and loads the necessary drivers. Keep in mind
however that some peripherals may require their own specific drivers to be loaded
manually. An icon in the taskbar at the bottom of the screen provides a visual
representation of the peripheral and indicates that it is ready for operation.
To attach the peripheral to the round, tether port on the side of the
8525 G2/8530 G2:
• Insert the barrel of the plug into the tether port and rotate slowly until it
clicks into place. The red dot on the port and on the connector should
be aligned.

Tether Port
Figure 3.8 The Tether Port

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
Monitoring The Network Connection
To remove the peripheral:
• Grasp the shell of the plug, and pull it back gently to unlock and release
the connector.
Important:

Never attempt to disconnect a peripheral by pulling the connector
by the wire. The connector is locked into place and can only be
unlocked and removed by pulling back the plug shell.

3.9 Monitoring The Network Connection
If your vehicle-mount is equipped with a wireless LAN radio, it will typically
associate with the nearest access point. The radio signal quality meter in the taskbar
indicates the relative strength of the communication link.
To access the radio signal icon from the keyboard:
• Tap on the radio icon in the taskbar to display the Wireless Statistics
dialog box.
Note:

Moving in and out of the radio coverage area can have varying effects on
a network session. At times, you may need to renew your connection by
logging in again.

3.10 Connecting An 8525 G2/8530 G2 To A PC
To pass information between an 8525 G2/8530 G2 and a PC or laptop, you’ll need
to connect them using an Auxiliary Port Cable (Model CA2200). This cable is
equipped with two USB Host I/F connections (for devices such as a mouse or
keyboard) and one USB Device I/F connection (to, for example, connect a PC or
laptop computer to the 8525 G2/8530 G2).

Auxiliary
Connector

USB
Connector

Figure 3.9 Auxiliary Port Cable
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
Using Microsoft ActiveSync To Work With Files
•
•

Attach the auxiliary connector to the auxiliary port on the 8525 G2/8530 G2
– the port closest to the vehicle-mount power cable.
Attach the USB connector to your PC or laptop.

3.10.1 Using Microsoft ActiveSync To Work With Files
Before communication can begin between an 8525 G2/8530 G2 and a PC,
ActiveSync® – Microsoft PC connectivity software – must be installed on your PC.
Once the devices are cabled together, running ActiveSync on the PC will allow you to:
• View 8525 G2/8530 G2 files from Windows Explorer.
• Drag and drop files between the 8525 G2/8530 G2 and the PC in the same
way that you would between PC drives.
• Back up 8525 G2/8530 G2 files to the PC, then restore them from the PC to
the vehicle-mount again, if needed, and so on.
To install ActiveSync, follow the step-by-step instructions provided with the
program’s setup wizard. Refer to the following website for details:

http://www.microsoft.com/windowsmobile/resources/downloads/pocketpc/activesync35.mspx
Note:

You’ll need to run an application – usbsetup.exe – to configure Windows
to recognize the 8525 G2/8530 G2. For information about this USB application, refer to Appendix C: USB Setup Application.

3.11 General Maintenance
3.11.1 Caring For The Touchscreen
The top of the touchscreen is a thin, flexible polyester plastic sheet with a conductive
coating on the inside. The polyester can be permanently damaged by harsh chemicals
and is susceptible to abrasions and scratches. Using sharp objects on the touchscreen
can scratch or cut the plastic, or crack the internal conductive coating.
If the touchscreen is used in harsh environments, consider applying a disposable
screen protector (PN 1008009). These covers reduce the clarity of the display
slightly but will dramatically extend the useful life of the touchscreen. When they
become scratched and abraded, they are easily removed and replaced.
The chemicals listed below must not come into contact with the touchscreen:
• mustard, ketchup,
• sodium hydroxide,
• concentrated caustic solutions,
56

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 3: Getting To Know The 8525/30 G2
Cleaning The 8525 G2/8530 G2
•
•

benzyl alcohol, and
concentrated acids.

3.11.2 Cleaning The 8525 G2/8530 G2
Important:
•
•
•

Do not immerse the unit in water. Dampen a soft cloth with mild
detergent to wipe the unit clean.

Use only mild detergent or soapy water to clean the vehicle-mount unit.
Avoid abrasive cleaners, solvents or strong chemicals for cleaning.
To clean ink marks from the keypad and touchscreen, use isopropyl alcohol.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

WORKING WITH WINDOWS CE 5.0
4.1 Navigating In Windows CE And Applications . . .
4.1.1 Navigating Using A Touchscreen And Stylus
4.1.2 Navigating Using The Keyboard . . . . . . .
4.2 Working With Files, Folders And Programs . . . .
4.3 The Startup Desktop . . . . . . . . . . . . . . . .
4.3.1 The Desktop Icons . . . . . . . . . . . . . .
4.3.2 The Taskbar . . . . . . . . . . . . . . . . . .
4.3.2.1 Using The Taskbar . . . . . . . . . .
4.3.2.2 Customizing The Taskbar . . . . . .
4.4 The Start Menu . . . . . . . . . . . . . . . . . . .
4.4.1 The Desktop . . . . . . . . . . . . . . . . .
4.4.2 Security Levels . . . . . . . . . . . . . . . .
4.4.2.1 Changing A Password . . . . . . . .
4.4.2.2 Configuring Security. . . . . . . . .
4.4.3 Programs . . . . . . . . . . . . . . . . . . .
4.4.4 Shortcuts . . . . . . . . . . . . . . . . . . .
4.4.5 Settings . . . . . . . . . . . . . . . . . . . .
4.4.6 Run . . . . . . . . . . . . . . . . . . . . . .
4.4.7 Shutdown . . . . . . . . . . . . . . . . . . .
4.5 Using A Dialog Box . . . . . . . . . . . . . . . .

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

61
61
61
62
62
63
64
64
65
65
66
66
67
67
68
69
71
72
72
73

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 4: Working With Windows CE 5.0
Navigating In Windows CE And Applications

4.1 Navigating In Windows CE And Applications
Graphic user interfaces like Windows CE for portable devices and desktop
Windows (2000, XP, etc.) utilize ‘point and click’ navigation. An equivalent
keyboard shortcut is also available for every ‘point and click’ action.
Windows CE supports the same ‘point and click’ user interface and keyboard
shortcuts as desktop Windows with one difference – the ‘point and click’ action is
accomplished using a touchscreen rather than a mouse. Actions can be performed
using any combination of keyboard shortcuts or touchscreen tapping.

4.1.1 Navigating Using A Touchscreen And Stylus
Note:

If the touchscreen is not registering your screen taps accurately, it may
need recalibration. Refer to “Calibrating The Touchscreen” on page 45.

Each 8525 G2/8530 G2s is equipped with a stylus – a pointing tool that looks like a
pen – that is used to select objects on the touchscreen.
Note:

To prevent damage to the touchscreen, use only the stylus (pen) supplied
with your 8525 G2/8530 G2.

To open a file, launch an applet or open a folder:
• Double-tap the stylus on the appropriate icon.
To navigate through a dialog box – for example, display the information in a tab,
choose a radio button, check a checkbox and so on:
• Tap the stylus on a tab, radio button, checkbox and so on.

4.1.2 Navigating Using The Keyboard
If your touchscreen has been disabled, you can use the keyboard rather than a stylus
to choose icons and navigate dialog boxes, display the desktop, and so on. If your
unit has already been fully configured and your application is launched at startup,
you’ll have little need for keyboard navigation.

Operation
Switch between active applications

Key or Key Combination
[ALT] [TAB]

Open task manager

[ALT] [ESC]

Move the cursor

Arrow keys

Open file, folder or icon

[ENTER]

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 4: Working With Windows CE 5.0
Working With Files, Folders And Programs
Exit & Save

[ENTER]

Close/Exit & Do Not Save

[ESC]

Navigate Dialog Boxes

[TAB]
To move cursor up [SHIFT] [TAB]
To display the contents of the next ‘tab’ in
a dialog box [CTRL] [TAB]

Select Radio Button/Press Button

[SPACE]

Go to Start Menu

[BLUE][0]

Table 4.1 Keyboard Navigation
Keep in mind that unlike a desktop computer, the 8525 G2/8530 G2 does not
support key chording (pressing two keys at the same time). You must press one key
followed by the next in sequence.
Refer to “Working With Files, Folders And Programs” on page 62 for additional
details about keyboard navigation.

4.2 Working With Files, Folders And Programs

•

Double-tap on the appropriate icon – either a folder icon, an application
icon or a file icon – to open or launch your selection.

4.3 The Startup Desktop
When the 8525 G2/8530 G2 boots up, the startup desktop (shell) is displayed. Any
applications stored in the Startup folder start up immediately.
Note:

The startup folder is located in \Windows\StartUp and
\Flash Disk\StartUp.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 4: Working With Windows CE 5.0
The Desktop Icons

•

Double-tap on the icon to open a window or, in the case of an application
icon, launch an application.

4.3.1 The Desktop Icons
The icons displayed in the startup desktop operate in much the same way as those
displayed on any standard PC desktop that is running Windows.

My Device
Choosing this icon displays the contents of your 8525 G2/8530 G2 computer. If
you’re not sure how to work with the files, folders and programs displayed, refer to
“Working With Files, Folders And Programs” on page 62.

Recycle Bin
The Recycle Bin temporarily contains items that were deleted, allowing you to
either permanently delete or restore these items.

Internet Explorer
Choosing this icon launches Internet Explorer – a standard Windows CE version. Keep
in mind that your supervisor will need to set up access using the Internet Options and
the Network and Dial-up Connections icons in the Control Panel.

Microsoft WordPad
Choosing this option launches Microsoft WordPad, a trimmed version of the Microsoft
Word application.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 4: Working With Windows CE 5.0
The Taskbar

Remote Desktop Connection
This option allows your 8525 G2/8530 G2 to communicate with a remote desktop
PC. “Remote Desktop Connection” on page 79 provides a website with step-by-step
instructions.

4.3.2 The Taskbar

The 8525 G2/8530 G2 is equipped with a taskbar at the bottom of the screen. It
displays icons through which you can view the internal battery capacity, the radio
signal quality of your unit, and so on. If the vehicle-mount is attached to a peripheral
device, an associated icon is displayed. In addition, the taskbar displays the
application(s) currently running on your unit and the security level assigned to your
8525 G2/8530 G2.
The taskbar also displays active modifier keys – [SHIFT], [ALT], [CTRL], [BLUE]
and [ORANGE]. Keys that have been locked “on” are displayed in uppercase
letters. For example, if you press the [CTRL] key twice to lock it “on”, it is
displayed as CTRL KEY in the taskbar.

4.3.2.1

Using The Taskbar

A taskbar icon allows you to display a tooltip – a short description of the status of
the icon, or to display the Control Panel dialog box associated with the icon.
• To display a tooltip, tap and hold the stylus on an icon.
• To display the Control Panel dialog box associated with an icon, double-tap
on the icon.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 4: Working With Windows CE 5.0
Customizing The Taskbar

4.3.2.2

Customizing The Taskbar

To customize the taskbar so that it displays only those icons you require:
• From the Start Menu, tap on the Settings>Taskbar and Start Menu.
The Taskbar and Start Menu dialog box is displayed.

•
Note:

Tap the stylus on the items you want to activate or deactivate. A check mark
indicates active items.
The Advanced tab allows you to tap on a Clear button to delete the contents of the Documents folder.

4.4 The Start Menu
Note:

Some of the Start Menu items may be disabled based on the current
8525 G2/8530 G2 security settings.

The Start Menu lists the operations you can access and work with. It is available
from the startup desktop or from within any application.
• Press [BLUE] [0] (zero) to display the Start menu using the keyboard.
Note:

Tap on the item in the menu with which you want to work.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 4: Working With Windows CE 5.0
The Desktop
If you’re using the keyboard:
• Use the arrow keys to highlight a menu item, and press [ENTER], or
If the menu item has an underlined character:
• Type the underlined alpha character. For example, to display the Security
dialog box, type the letter ‘s’.

4.4.1 The Desktop
Choosing the Desktop option from the Start Menu displays the 8525 G2/
8530 G2 desktop.

4.4.2 Security Levels
Choosing the Security option from the Start Menu displays a dialog box in which
you can define the access level for the 8525 G2/8530 G2 – Supervisor or User.

Figure 4.1 Security Levels

Assigning The Supervisor Security Level
The security level is represented by an icon in the shape of a lock in the taskbar. The
security levels define the options accessible to the operator in the Start Menu and
the taskbar. By default, the security level is set to User, restricting access to only the
most basic Start Menu items.
To allow access to all the Start Menu and taskbar options:
• Tap on the radio button next to Supervisor.
• Tap in the Password field, and type the Supervisor level password – the
default password is 123456.
• Tap on OK – you can now access all menu items in the Start Menu along
with the icons in the taskbar.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 4: Working With Windows CE 5.0
Changing A Password

4.4.2.1
Note:

Changing A Password
Keep in mind that this is the same password as that assigned through the
Password control panel applet.

•

To assign a password, choose a security level, and enter the existing password in the Password field.
• Tap on the Set Password button.
A dialog box labelled Password Properties is displayed.
• Type the new password in the Password: text box
• In the Confirm Password: text box, retype the new password.

4.4.2.2

Configuring Security

In the Security Level dialog box (see Figure 4.1 on page 66):
• Tap on the Configure button.
This dialog box allows you to determine which security levels will have an
associated icon displayed in the taskbar. By default, a security icon is not displayed
for user-level security.

Note:

It is recommended that you enable ‘Allow Teklogix Security Level’ so that
authorized Psion Teklogix service personnel can access your unit should
it require maintenance.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 4: Working With Windows CE 5.0
Programs

4.4.3 Programs
•

Tap on Programs to display a sub-menu of options.

This sub-menu allows you to choose ActiveSync, Demo and Command Prompt, and
you can access Internet Explorer, along with installed applications (e.g., Microsoft
WordPad), Remote Desktop Connection and Windows Explorer.

ActiveSync®
ActiveSync is used to connect your 8525 G2/8530 G2 to your PC.

Demo
The Demo folder contains demo programs available on the 8525 G2/8530 G2. Some
demo programs such as Sound and Imager require hardware support not available
on these vehicle-mounts.

Summit
The Summit folder provides access to the SCU (Summit Client Utility). The SCU is
the utility you will need to configure the Summit 802.11g Compact Flash radio
module, model number RA2041 so that it can communicate through a wireless LAN
effectively and securely.

Command Prompt
Command Prompt is used to access the DOS command prompt. At the prompt, you
can type DOS commands such as dir to display all the directories in the drive.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 4: Working With Windows CE 5.0
Shortcuts

Internet Explorer
The 8525 G2/8530 G2 is shipped with the Microsoft Internet Explorer for Windows CE.
You can access the Internet Options icon through the Start Menu under
Settings>Control Panel or by double-tapping on the desktop icon labelled My Device
and then, double-tapping on the Control Panel icon.

Remote Desktop Connection
Remote Desktop Connection is an 8525 G2/8530 G2 application used to connect to
a Windows Terminal Server so that you can run a “session” on the Server machine
using the 8525 G2/8530 G2 (Windows CE device). “Remote Desktop Connection”
on page 79 provides a website with details about this option.

Windows Explorer
The Windows Explorer installed on your 8525 G2/8530 G2 is consistent with all
Windows CE devices. You can access this option either from the Start Menu under
Programs>Windows Explorer or from your device desktop.

4.4.4 Shortcuts

The System Tray
If your touchscreen is not enabled, you can use the System Tray option to access the
icons in the taskbar at the bottom of the screen. The taskbar displays indicators such
as a radio signal icon and the security level. Highlighting a taskbar icon allows you
to display a tooltip – a short description of the status of the icon, or to display the
Control Panel dialog box associated with the icon.
• Choose System Tray from the Shortcuts Start Menu.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 4: Working With Windows CE 5.0
Shortcuts
When System Tray is chosen, you can access the taskbar icons using the arrow keys.
• Press the [LEFT] and [RIGHT] arrow keys to highlight the icon in the
taskbar about which you’d like more information – a tooltip is displayed as
each taskbar icon is highlighted.
• To display the Control Panel dialog box associated with the highlighted
icon, press [ENTER].

Cycle Tasks
When Cycle Tasks is selected (and the Task Manager is not open), you can cycle
through active applications. To choose this option:
• Choose Cycle Tasks from the Shortcuts menu, or
Press [ALT] [TAB].

The Task Manager
The Task Manager option allows you to switch to another task or to end an active
task. To display the task manager window:
• Choose Task Manager in the Start Menu, or
Press [ALT] [ESC].

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 4: Working With Windows CE 5.0
Settings

4.4.5 Settings
•

Tap on Settings to display a sub-menu of options.

Control Panel
The Control Panel contains applets used to configure hardware, the operating
system and the shell. If your 8525 G2/8530 G2 is running with the Psion Teklogix
Tekterm application or another application, additional configuration applets may
appear in the Control Panel.

Network And Dial-Up Connections
The Network and Dial-up Connections window allows you to configure an 802.11
radio or execute an existing configuration. Refer to “Configuring Your IEEE 802.11
Radio” on page 15 for radio setup details.

Taskbar And Start Menu
The Taskbar and Start Menu option displays a dialog box in which you can
customize the taskbar, selecting the icons that will be displayed. Refer to
“Customizing The Taskbar” on page 65 for additional details about this option.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 4: Working With Windows CE 5.0
Run

4.4.6 Run

Choosing the Run option from the Start Menu displays a dialog box in which you
can enter the name of the program, folder or document you want to open or launch.

4.4.7 Shutdown

Choosing Shutdown displays a sub-menu of options, including Suspend, Warm
Reset and Cold Reset.

Note:

This menu varies slightly depending on the security level chosen. When
the 8525 G2/8530 G2 is set to User level, the Shutdown option is replaced
by Suspend. A sub-menu is not available.
At Teklogix security level, an additional option is available in the
sub-menu – Bootloader. This option behaves like cold-reset, except
that the 8525 G2/8530 G2 starts Bootloader rather than Windows CE.

Suspend
The Suspend option suspends the 8525 G2/8530 G2 immediately – this is equivalent
to turning the vehicle-mount off.
72

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 4: Working With Windows CE 5.0
Using A Dialog Box

Warm Reset
The Warm Reset option resets the 8525 G2/8530 G2, leaving all saved files and
(registry) settings intact. Any unsaved data is lost.

Cold Reset
The Cold Reset option resets the 8525 G2/8530 G2. Any files not stored in
permanent memory are lost. However, the registry settings are saved.

4.5 Using A Dialog Box

A dialog box (like the samples screens in this section) appears when you need to
make selections and enter further information.

Checkbox

Dropdown Menu
Tabs

Button
Radio Button

Textbox

Figure 4.2 Navigating Dialog Boxes
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 4: Working With Windows CE 5.0
Using A Dialog Box
Note:

If you’re using the touchscreen, use the stylus to tap on an element in a
dialog box to select or deselect it, display dropdown menus, save your
selections, and so on. If you’re using a keyboard, follow the directions
below.

Dialog boxes contain one or more of the following elements:
Tab: A tab separates different elements of a dialog box. Tap on a tab to display the
associated information.
Textbox: A textbox requires that you type information. Highlight the textbox with
the stylus and then type the appropriate information.
Dropdown: This type of menu is identified by up and down arrows next to the
dropdown menu to indicate that additional options are available. Tap the stylus on
the arrow to display the options in the menu.
Checkbox: This box allows you to select or deselect an option. To select or deselect
a checkbox, tap the stylus on the checkbox to select or deselect it.
Radio buttons: These buttons allow you to choose from a number of options. For
example, in the sample screen in Figure 4.2 on page 73 you can choose to ‘Obtain
an IP address via DHCP’ or ‘Specify an IP address’. Tap the stylus on the button
to select or deselect it.
Buttons: This type of button allows you to ‘Save’, ‘Delete’ and so on the options
you’ve chosen in a dialog box. Tap the stylus on the button to activate it.
Saving Your Choices: Once you’ve made all your changes, tap on OK to save your
changes and exit the window.
Note:

A dialog box item that is displayed in grey text indicates that it is not
currently available.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

CONFIGURATION
5.1
5.2
5.3
5.4
5.5

Remote Desktop Connection . . . . . . . . . . . .
Pocket PC Compatibility . . . . . . . . . . . . . .
The Control Panel . . . . . . . . . . . . . . . . . .
Control Panel Icons . . . . . . . . . . . . . . . . .
Basic Setup . . . . . . . . . . . . . . . . . . . . .
5.5.1 Display Properties . . . . . . . . . . . . . .
5.5.1.1 Display Background . . . . . . . . .
5.5.1.2 Display Appearance . . . . . . . . .
5.5.1.3 Display Backlight . . . . . . . . . .
5.5.2 Keyboard Properties . . . . . . . . . . . . .
5.5.2.1 Key Repeat. . . . . . . . . . . . . .
5.5.2.2 Keyboard Backlight . . . . . . . . .
5.5.2.3 Keyboard One Shots . . . . . . . . .
5.5.2.4 Keyboard Macro Keys . . . . . . . .
5.5.2.5 Unicode Mapping . . . . . . . . . .
5.5.2.6 Scancode Remapping . . . . . . . .
5.5.3 Volume And Sound Properties . . . . . . . .
5.5.3.1 Volume Adjustments. . . . . . . . .
5.5.4 Power Properties . . . . . . . . . . . . . . .
5.5.4.1 Battery Capacity . . . . . . . . . . .
5.5.4.2 Suspend . . . . . . . . . . . . . . .
5.5.4.3 Advanced Power Properties . . . . .
5.5.4.4 Devices. . . . . . . . . . . . . . . .
5.5.5 Stylus Properties . . . . . . . . . . . . . . .
5.5.5.1 Setting Double-Tap Sensitivity . . .
5.5.5.2 Touchscreen Calibration . . . . . . .
5.5.5.3 Touch – Disabling The Touchscreen.
5.5.6 Manage Triggers . . . . . . . . . . . . . . .
5.5.6.1 Trigger Mappings . . . . . . . . . .
5.5.6.2 Add And Edit Trigger Mapping . . .
5.5.7 Certificate Assignment . . . . . . . . . . . .
5.5.8 Narrow Band Radio Setup . . . . . . . . . .
5.5.8.1 Info Tab . . . . . . . . . . . . . . .

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

. 79
. 79
. 79
. 80
. 85
. 85
. 85
. 86
. 86
. 87
. 88
. 89
. 89
. 91
. 92
. 93
. 96
. 96
. 97
. 97
. 98
. 98
. 99
.100
.100
.101
.101
.102
.102
.104
.105
.106
.106

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration

5.5.8.2 Channel Tab . . . . . . . . .
5.5.8.3 Protocol Tab . . . . . . . . .
5.5.8.4 Power Tab . . . . . . . . . .
5.5.8.5 Radio Tab. . . . . . . . . . .
5.5.9 Bluetooth Setup . . . . . . . . . . . .
5.5.9.1 The Devices Tab . . . . . . .
5.5.9.2 The Server Tab . . . . . . . .
5.5.9.3 Outgoing Tab . . . . . . . . .
5.5.9.4 Active Conn. Tab. . . . . . .
5.5.9.5 Properties Tab . . . . . . . .
5.5.9.6 Bluetooth GPRS Connection.
5.5.10 Total Recall . . . . . . . . . . . . .
5.5.10.1 Creating A Backup Profile .
5.5.10.2 Restoring A Profile . . . . .
5.5.11 Input Panel . . . . . . . . . . . . . .
5.5.12 IPv6 Support . . . . . . . . . . . . .
5.5.13 Scanner Properties Setup . . . . . .
5.5.13.1 Scanner Barcodes . . . . . .
5.5.13.2 Decoded Scanners . . . . .
5.5.13.3 Non-Decoded Scanners . . .
5.5.13.4 Non-Decoded Options . . .
5.5.13.5 Code 39 Settings . . . . . .
5.5.13.6 Code 128 Settings. . . . . .
5.5.13.7 EAN 13 Settings . . . . . .
5.5.13.8 EAN 8 . . . . . . . . . . . .
5.5.13.9 UPC A Settings . . . . . . .
5.5.13.10 UPC E Settings . . . . . .
5.5.13.11 Codabar . . . . . . . . . .
5.5.13.12 Code 93 . . . . . . . . . .
5.5.13.13 Code 11 . . . . . . . . . .
5.5.13.14 Interleaved 2 of 5 . . . . .
5.5.13.15 MSI Plessey . . . . . . . .
5.5.13.16 Discrete 2 of 5 . . . . . . .
5.5.13.17 IATA 2 of 5 . . . . . . . .
5.5.13.18 Bar Code Options Tab . . .
5.5.13.19 Translations Tab . . . . . .
5.5.13.20 Ports Tab . . . . . . . . . .
5.5.13.21 Tether Port (COM 1) . . .

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

109
113
115
116
118
119
122
122
123
124
125
129
130
133
134
136
137
137
138
138
139
140
142
143
145
146
146
147
148
148
149
149
150
150
151
153
154
154

Chapter 5: Configuration

5.5.13.22 Serial Port (COM 2). . . . . . . . . . . . . .
5.5.14 SNMP (Simple Network Management Protocol) Setup
5.5.14.1 Contacts Tab . . . . . . . . . . . . . . . . . .
5.5.14.2 Communities Tab . . . . . . . . . . . . . . . .
5.5.14.3 Trap Destination Tab . . . . . . . . . . . . . .
5.5.14.4 Permitted Hosts Tab . . . . . . . . . . . . . .

.
.
.
.
.
.

.155
.157
.158
.159
.160
.162

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Remote Desktop Connection

5.1 Remote Desktop Connection
Remote Desktop Connection is an 8525 G2/8530 G2 application used to connect to
a Windows Terminal Server so that you can run a “session” on the Server machine,
using the 8525 G2/8530 G2 (Windows CE device).
Refer to the following website for step-by-step information about setting up
this connection:
http://www.microsoft.com/WindowsXP/pro/using/howto/gomobile/remotedesktop/default.asp

5.2 Pocket PC Compatibility
The 8525 G2/8530 G2 supports the AYGShell API set that allows PocketPC-compatible applications to run on the vehicle-mount. Microsoft Windows CE 5.0 is
designed to include application programming interface (API) compatibility support
for the Microsoft Windows Powered Pocket PC 2002 shell in 8525 G2/8530 G2s
running Windows CE 5.0.
The website listed below describes the APIs exposed through AYGShell and the
application compatibility between Windows Powered Pocket PC 2002-based applications and Windows CE-based devices:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dncenet /html/WINCENET_CEPCC_App.asp

5.3 The Control Panel
The Windows CE Control Panel provides a group of icons through which you can
set a variety of system-wide properties, such as mouse sensitivity, network
configuration and the desktop color scheme.
Note:

If you are uncertain how to move around a dialog box and make selections, review “Using A Dialog Box” on page 73.

When the 8525 G2/8530 G2 boots up, the startup desktop (shell) is displayed, and
any applications stored in the Startup folder start up immediately.
• Press [BLUE][0], or
• Tap on the Start button in the taskbar to display the Start Menu.
• Tap on Settings>Control Panel.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Control Panel Icons
The Control Panel folder contains icons used in the setup of your 8525 G2/8530 G2.

Figure 5.1 Control Panel

5.4 Control Panel Icons
The Windows CE Control Panel provides a group of icons that allow you to
customize and adjust settings on your 8525 G2/8530 G2.

App Launch Keys
Allows you to map keys to applications, so that you can launch those applications from a single key-press.

Bluetooth
A short-range wireless technology that enables data communication
between devices. It also provides the capability to use a Bluetooth-enabled
cellular phone as a data modem, exchanging information with other Bluetooth devices and providing network access.

Certificates
A public key is transmitted as part of a certificate. The certificate assigned
through this icon is used to ensure that the submitted public key is, in fact,
the public key that belongs to the submitter. The client checks that the certificate has been digitally signed by a certification authority that the client
explicitly trusts. “Certificate Assignment” on page 105 directs you to the
appropriate setup information.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Control Panel Icons

Date/Time
Allows you to set the current Month, Date, Time and Time Zone on your unit.

Dialing
Specifies dialing settings, including area code, country code, dial type and
the code to disable call waiting. You can store multiple patterns – for example, ‘Work’, ‘Home’, and so on using this dialog box.

Display
Changes the appearance (window colour scheme) on the unit desktop. This
applet can also be used to adjust the backlight level.

Input Panel
The 8525 G2/8530 G2 is equipped with the framework for a Soft Input
Panel (SIP) should you need to design your own SIP. On the 8530 only,
when a keyboard is not connected, a soft keyboard is available.

Internet Options
Used to configure your Internet browser including options such as identifying the default and search page that the browser applies when connecting to
the Internet, setting the cache size, specifying the Internet connection
options, and defining the security level that is applied when browsing.

IPv6 Support
Refers to a new Internet Protocol specification (version 6) that has been
published to use 128-bit IP addresses (replacing version 4).

Keyboard
Toggles character repeat on and off and specifies delay and rate for repeated
characters. It also allows you to adjust the keyboard backlight threshold and
intensity. Additional tabs also allow the configuration of macros and
scanner key remapping.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Control Panel Icons

Manage Trigger
Allows multiple-scanner triggering, including the ability to configure each
of the trigger buttons. You can configure the trigger ID for each trigger
button for both single- and double-click, the double-click time and the
double-click data.

Network And Dial-up Connections
Displays a network window from which the 8525 G2/8530 G2 radio can be
configured and an existing configuration can be executed. Refer to “Configuring Your IEEE 802.11 Radio” on page 15 for details.

Owner
Provides fields in which you can specify owner information. A ‘Notes’ tab
allows additional information to be entered and displayed when the unit is
powered up. ‘Network ID’ tab information is used to access network resources.
(This information should be provided by your System Administrator.)

Password
Allows you to assign a password to restrict access to elements of the unit.
Once assigned, password access cannot be circumvented so it is important
that you write down your password and keep it in a safe place. Refer to
“Security Levels” on page 66 for details.

PC Connection
Enables direct connections to a desktop computer. Selecting the ‘Change Connection’ button allows you to change the type of direct connect to your PC.

Power
Allows you to define if, why and when the unit will automatically switch to
Suspend state. It also allows you to define which Card Slots are active
and to turn power for the card slots (PCMCIA and SD/MMC) on and
off. This dialog box also allows you to enable and disable the built-in Bluetooth radio.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Control Panel Icons

RDC Licenses
The Terminal Services license server stores all license tokens that have been
installed for a group of terminal servers and tracks licenses issued. The
Remote Desktop Licenses (RDC) application displays license ‘tokens’ for
devices that connect to a Terminal Server.

Region & Language Settings
Allows you to specify the local language the display text will use along
with the format of numbers, currency, time and date for your region.

Remove Programs
Lists the programs that can be removed from your unit. To remove a program, choose it and then tap on the Remove button.

Stylus
Adjusts how Windows CE recognizes your double-tap (as slow or rapid
successive taps).
Under the Calibration tab, you can recalibrate your touchscreen by
tapping on the Recalibrate button and following the directions on the
calibration screen.

Storage Manager
Allows the user to view information about the storage devices that are
present, such as SD-MMC flash cards.

System
Displays system and memory properties. Under the Memory tab, you can
allocate memory between storage memory and program memory.

Teklogix Scanners
Used to set up scanner parameters and choose the bar code symbologies
that the 8525 G2/8530 G2 scanner will successfully read.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Control Panel Icons

Total Recall
This is a Psion Teklogix utility developed to maintain applications and
setting over cold boots. This utility is based on a backup and restore concept
and is extended to incorporate powerful advanced features.

TweakIT Settings
Allows you to change Advanced System Settings (interface, network, and
servers), User System Settings (display font size), and provides the
Registry Editor.

Volume & Sound
Allows you to adjust the volume of the beep that is emitted to indicate
events like warnings, key clicks and screen taps.
Sounds (wave files) cannot be reproduced on 8525 G2/8530 G2 units. The
beeper volume and the conditions under which it sounds are tailored from
within the application installed on your unit.

SNMP
SNMP (Simple Network Management Protocol) is the protocol used to
monitor and manage devices attached to a TCP/IP network.

Narrow Band Radio
This icon is displayed only if a Narrow Band radio is installed in the unit. It
provides access to the Narrow Band setup screens.

Wireless WAN
Provides access to technology like GSM/GPRS and CDMA which allows
wide area networking capability such as internet browsing via GSM/GPRS.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Basic Setup

5.5 Basic Setup
5.5.1 Display Properties
•

In the Control Panel, choose the Display icon.

Figure 5.2 Display Icon

5.5.1.1

Display Background

The Background tab allows you to adjust the 8525 G2/8530 G2 display background.
• In the Display Properties dialog box, open the Background tab.

This option allows you to change the background colour or add an image.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Display Properties

5.5.1.2
•

Display Appearance
In the Display Properties dialog box, open the Appearance tab.

This dialog box allows you to customize the display colour scheme.

5.5.1.3

Display Backlight

The backlight is activated for a configurable amount of time when the 8525
G2/8530 G2 is in use (key press, scanner trigger or data received from the host).
The Display Properties dialog box in the Control Panel allows you to specify the
intensity of the backlight along with how long the display will maintain the
specified intensity.
Note:
•

Note:

Keep in mind that this option may be restricted to supervisory use only.
In the Display Properties dialog box, open the Backlight tab.

Backlight changes take effect immediately. You do not need to reset
the 8525 G2/8530 G2.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Keyboard Properties

Intensity
This parameter is used to adjust the light intensity of the backlight. Sliding the bar to
the left lowers the light intensity, and sliding it to the right raises the intensity.

Bright For
The value chosen from this dropdown menu determines the duration of time that the
backlight stays on at the configured intensity when a unit is not in use.

Dim For
The value chosen from this dropdown menu determines the duration of time that
the backlight stays on at half the configured intensity (dimmed backlight) when a
unit is not in use.

External Power Checkbox
When you select the checkbox next to ‘When using external power keep the
backlight always ON.’, the backlight remains ON at the configured intensity when
the 8525 G2/8530 G2 is operating with external power (not internal battery power).
If the 8525 G2/8530 G2 is drawing power from a battery, this option is ignored and
the other parameters defined in Display Properties dialog box take affect.

5.5.2 Keyboard Properties
This icon displays the Keyboard Properties dialog box in which you can adjust the
repeat rate of the keys, the intensity of the keyboard backlight and the behaviour of
the [BLUE] and [ORANGE] modifier keys. This dialog box also allows you to
define macro keys and remap the keyboard.
• In the Control Panel, choose the Keyboard icon.

Figure 5.3 Keyboard Icon
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Keyboard Properties

5.5.2.1
•

Key Repeat
In the Keyboard Properties dialog box, open the Repeat tab.

Enable Character Repeat
Tapping in the checkbox next to this option enables the key behaviour you specify in
this dialog box.

Repeat Delay
The position of the slider determines how long a key must be held down before it
begins to autorepeat.

Repeat Rate
The value assigned for the Repeat Rate parameter determines how quickly the key
you press repeats and is measured in characters per second (cps). Sliding the bar to
the left slows the repeat rate, and sliding the bar to the right increases the repeat rate.
Note:

Use the field at the bottom of this dialog box to test the repeat delay and
rate settings you’ve chosen.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Keyboard Properties

5.5.2.2
•

Keyboard Backlight
In the Keyboard Properties dialog box, open the Backlight tab.

Intensity
This parameter is used to adjust the light intensity of the 8525 G2/8530 G2 keyboard
backlight. Sliding the bar to the left darkens the keyboard backlight intensity, and
sliding it to the right lightens the intensity.

Options – ON For
The value chosen from this dropdown menu determines the duration of time that the
keyboard backlight stays on when a unit is not in use.
Note:

5.5.2.3
•

Tapping in the checkbox next to ‘When using external power, keep
the backlight always ON’ forces the keypad backlight to remain on
when the unit is operating with external power such as vehicle battery
or A/C adaptor.

Keyboard One Shots
In the Keyboard Properties dialog box, open the One Shots tab.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Keyboard Properties
The options in this tab allows you to determine how modifier keys on your 8525
G2/8530 G2 behave. For each modifier key–[ALT], [SHIFT], [CTRL], [ORANGE]
and [BLUE]–you have the following options in the drop-down menu: Lock, OneShot, and OneShot/Lock.
Note:

Keep in mind that checking the taskbar lets you know whether or not
these keys are locked on. For example, if the [ORANGE] key is locked
‘on’, the taskbar at the bottom of the screen displays it in uppercase characters – ORANGE KEY. If this key is displayed in lowercase characters in the
taskbar, you’ll know that the orange key is not locked. It will become inactive following a key press.

Important:

Once you’ve assigned a One Shot mode to a modifier key, you
need to tap on the OK button at the top of the tab to activate
your selection.

Lock
If you choose Lock from the drop-down menu, pressing a modifier key once locks it
‘on’ until you press the modifier key a second time to unlock or turn it off.

OneShot
If you choose OneShot, the modifier key remains active only until the next key is pressed.

OneShot/Lock
OneShot/Lock allows you to combine these functions. When you choose this
option and you press the modifier key once, it remains active only until the next key
is pressed.
If you press the modifier key twice, it is locked ‘on’, remaining active until the
modifier key is pressed a third time to turn it ‘off’.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Keyboard Properties

5.5.2.4
•

Keyboard Macro Keys
In the Keyboard Properties dialog box, open the Macros tab.

A macro has 200 programmable characters (or “positions”). The macro keys can be
programmed to replace frequently used keystrokes, along with the function of
executable keys including [ENTER], [BKSP] and [DEL] ([BLUE]-[BKSP]),
function keys and arrow keys.

Recording And Saving A Macro
You can program up to 12 macro keys.
• In the Macro menu, highlight a macro key number – for example, macro 1
to assign a macro to macro key [M1]. Tap on the Record button.
A message screen is displayed instructing you to ‘Enter Key Strokes to Record’.

•

Type the macro sequence you want to assign to the Macro key. You can
type text and numbers, and you can program the function of special keys
into a macro.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Keyboard Properties
Note:

Tap on the ‘Stop Recording’ button at any time to suspend the process.

•

When you’ve finished recording your macro sequence, press the Stop
Recording button, or type the key sequence – [CTRL] [ALT] [ENTER].
A new screen – Verify Macro – displays the macro sequence you created. The Save
button is highlighted.
• Tap on the Save button.
Note:

If you want to discard the macro you’ve just created, tap on the
‘Discard’ button.

Executing A Macro
To execute a macro:
• Press the macro key to which you’ve assigned the macro. For example, if
you created a macro for macro key ‘1’, press [M1] to execute the macro.

Deleting A Macro
To delete a macro:
• In the Macros tab, tap on the macro number you want to delete.
• Tap on the Delete button.

5.5.2.5
•

Unicode Mapping
In the Keyboard Properties dialog box, open the Unicode Mapping tab.

The Unicode Mapping tab is used to map combinations of virtual key values and
[CTRL] and [SHIFT] states to Unicode™ values. This tab shows the configured
Unicode character along with the Unicode value. Keep in mind that Unicode
configurations are represented as hexadecimal rather than decimal values.
92

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Keyboard Properties
All user-defined Unicode mappings are listed in the Unicode Mapping tab in order
of virtual key value, and then by order of the shift state. If a Unicode mapping is not
listed, the Unicode mapping is mapped to the default Unicode value.

Adding And Changing Unicode Values
Important:

Changes to Unicode mappings are not saved until you exit the
Keyboard Properties dialog box.

•

Tap on the Add/Change button.

•

Tap on a value in the Unicode mapping list – in the sample screen above, a
value will be assigned to virtual key 0 (VK 0).
Tap the stylus in the Unicode Mapping field, and type a Unicode value for
the highlighted key.

•
Note:

To add a shifted state – [SHIFT] and/or [CTRL], tap the checkbox next to
‘SHIFT Pressed’ and/or ‘CTRL Pressed’. to select the shift state you want
to assign.

Removing Unicode Values
•

5.5.2.6

In the Unicode Mapping tab, highlight the item you want to delete, and tap
the stylus on the Remove button.

Scancode Remapping

A scancode is a number that is associated with a physical key on a keyboard. Every
key has a unique scancode that is mapped to a virtual key, a function or a macro.
Scancode Remapping allows you to change the functionality of any key on the

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Keyboard Properties
keyboard. A key can be remapped to send a virtual key (e.g. VK_F represents the
‘F’ key; VK_RETURN represents the [ENTER/ON] key, etc.), perform a function
(e.g. turn the scanner on, change volume/contrast, etc.) or run a macro.
There are three different tables of scancode mappings: the Normal table, the Blue
table and the Orange table. The Normal table defines unmodified key presses; the
Blue table defines key presses that occur when the [BLUE] modifier is on; the
Orange table defines key presses that occur when the [ORANGE] modifier is on.
The default mappings of these scancodes can be overwritten for each of these three
tables using the Scancode Remapping tab accessed from the Keyboard Properties
dialog box.

The first column in the Scancode Remapping tab displays the Scancodes in
hexidecimal. If the scancode is remapped to a virtual key, that virtual key is
displayed in the next column labelled ‘V-Key’. A virtual key that is ‘Shifted’ or
‘Unshifted’ is displayed in the third column labelled ‘Function’.
If the scancode is remapped to a function or a macro, the first and second columns
remain blank while the third column contains the function name or macro key
number (e.g., Macro 2).

Adding A Remap
To add a new remapping:
• Tap the stylus on the Add button at the bottom of the dialog box.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Keyboard Properties
The Remap Scancode dialog box is displayed.

•
Note:

Type the scan code in hexidecimal in the field labelled Scancode:
The Label: field displays the default function of the scancode you
are remapping.

Virtual Key, Function And Macro
The radio buttons along the side of the dialog box allow you to define to what the
scan code will be remapped: Virtual Key, Function or Macro.
When Virtual Key is selected, you can choose to force [SHIFT] to be on or off
when the virtual key is sent. If No Force is selected, the shift state is dependent on
whether the shift state is on or off at the time the virtual key is sent.
When Function is selected, a list of valid functions appears in the dialog box.
When Macro is selected, the macro keys available on your unit are listed in the
dialog box.
• Choose Virtual Key, Function or Macro.
• Choose a function from the Function list in the dialog box, and tap
on OK.

Editing A Scancode Remap
To edit a scancode:
• In the Scancode Remapping tab, tap on the remap you want to edit.
• Tap on the Edit button, and make the appropriate changes.
• Tap on OK to save your changes.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Volume And Sound Properties

Removing A Remap
To delete a remap:
• In the Scancode Remapping tab, highlight the scancode you want to delete,
and tap on the Remove button.
• Tap on OK.

5.5.3 Volume And Sound Properties
Note:

•

Sounds (wave files) cannot be reproduced on 8525 G2/8530 G2 units. The
conditions under which 8525 G2/8530 G2s emit sounds are tailored from
within the application installed on your unit.
In the Control Panel, choose the Volume & Sounds icon.

Figure 5.4 Volume Icon

5.5.3.1

•

Volume Adjustments

Slide the volume button upward to increase the beeper volume or down-

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Power Properties

•

ward to decrease the beeper volume.
Under the heading Enable sounds for, enable the conditions under which
you want the 8525 G2/8530 G2 to emit a beep.

5.5.4 Power Properties
This icon allows you to define the Suspend state of your unit. It also allows you to
define which Card Slots are active and to turn power for the card slots (PCMCIA
and SD/MMC) on and off. Power Properties also allows you to enable and disable
the built-in Bluetooth radio.
• In the Control Panel, choose the Power icon.

Figure 5.5 Power Icon

5.5.4.1

Battery Capacity

The Battery tab displays status of the internal battery in your unit.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Power Properties

5.5.4.2
•

Suspend
In the Power Properties dialog box, open the Suspend tab.

Suspend
When the 8525 G2/8530 G2 is idle – not receiving any user input (a key touch, a
scan, and so on) or system activity (serial data, an activity initiated by an
application, and so on), the value chosen in the Suspend Timeout dropdown menu
determines when the unit will go to suspend state (appear to be off).
When the time in the Suspend Timeout field elapses without any activity, the unit
enters Suspend state. In Suspend state, the 8525 G2/8530 G2 CPU enters a sleep
state, and the radio is shut off. The state of the device (RAM contents) is preserved.
Pressing [ENTER] wakes the system from suspend state. When the 8525 G2/8530
G2 is in suspend state, the network connection is broken immediately; you must
re-establish the network connection.

5.5.4.3

Advanced Power Properties

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Power Properties

Allow Suspend With
This tab allows you to specify whether or not your unit will enter suspend state
while is operating with an active PPP connection, network interface or active
TCP/IP connection.

Low Power Warning
The sliding scale under this section of the tab allows you to specify the remaining
battery capacity at which a warning message is displayed on the vehicle-mount
screen – 0% to 20%.

5.5.4.4

Devices

Slot Power Status
This tab allows you to enable or disable power to the individual CF, PC Card and
SDIO slots in your unit.

Built-In Devices Power Status
A checkmark next to Enable Bluetooth indicates that the unit’s built-in, Bluetooth
radio is enabled.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Stylus Properties

5.5.5 Stylus Properties
Note:
•

Touchscreen calibration may not be enabled on your unit. If your screen
appears to require recalibration, contact your supervisor.
In the Control Panel, choose the Stylus icon.

Figure 5.6 Stylus Icon

5.5.5.1
•

100

Setting Double-Tap Sensitivity
In the Double-Tap tab, follow the directions to tailor the sensitivity of the
stylus when you tap on the touchscreen.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Stylus Properties

5.5.5.2

Touchscreen Calibration

Touchscreens rarely require recalibration. However, if your touchscreen has never
been calibrated or if you find that the stylus pointer is not accurate when you tap on
an item, you can use the Calibration tab to recalibrate the touchscreen.
• Choose the Calibration tab and then tap on the Recalibrate button.

•

5.5.5.3

•

Follow the directions in the Calibration tab to recalibrate the screen.

Touch – Disabling The Touchscreen

Tap on the checkbox next to Disable the touch panel. The touchscreen will
not accept screen taps.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

101

Chapter 5: Configuration
Manage Triggers

5.5.6 Manage Triggers
This applet allows you to configure how barcode scanners are triggered. You can
configure the trigger ID for each trigger button for both single- and double-click,
and the double-click time.
•

In the Control Panel, choose the Manage Triggers icon.

Figure 5.7 Manage Triggers Icon
The Manage Triggers screen lists any trigger mappings.

5.5.6.1

Trigger Mappings

A trigger mapping is an association between a particular key on the keyboard and
a driver or application, the “owner(s)” of the trigger source. When the specified
key is pressed, the owner (for example, a decoded scanner) is sent a message.
Important:

102

It is not possible to have two or more identical mappings—for
example [F1] cannot be mapped to the Non-Decoded Scanner
twice—even if the trigger type is different.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Manage Triggers
A keyboard key that is used as a trigger source will no longer generate key data, or perform its normal function. For example, if the
space button is used as a trigger source, it will not be able to send
space characters to applications.

Double-Click
When a key is pressed and released, then pressed again within the configured time
(between 0 to 1000 milliseconds), a double-click occurs. See also “Trigger Type” on
page 104.

Show All
By default, the trigger mapping list only shows active mappings. Mappings for
drivers or applications that are not currently active are not normally displayed. By
checking this checkbox, all mappings, both active and inactive, are displayed.

Add
Tapping this button brings up the Add Mapping dialog box, so that you can add new
trigger mappings.

Edit
Tapping this button brings up the Edit mapping dialog box, so that you can edit
existing trigger mappings.

Remove
Tapping this button removes an existing mapping.

OK
The OK button in the top right of the Manage Triggers screen saves all changes
made. If the cancel button X is tapped instead, or the [ESC] key is pressed, all
changes made will be discarded.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

103

Chapter 5: Configuration
Manage Triggers

5.5.6.2

Add And Edit Trigger Mapping

This dialog box is used to add trigger mappings.

Source
This dropdown list allows you to specify the source of the trigger events, such as a
keyboard key [F1], for the Trigger Owner selected.
Notes: It is possible to map the same source to different owners—for example,
[F1] can be mapped to both the Imager and Non-Decoded Scanner. If so,
both devices/operations will occur simultaneously. This is not recommended in most cases, especially with devices that draw a great deal of
current, such as Imagers.
It is also possible to map different sources to the same owner.

Add Source
Only existing trigger sources are shown in the Source combo-box. To add a new
source to this list, tap on the Add Source button. A dialog box pops up, allowing
you to select the keyboard key to use as a trigger source.

Trigger Type
You can enable either an Up/Down or Double Click response to a trigger press.
Normally, when a trigger (keyboard key, etc.) is pressed and released, a “trigger
down” event is sent to the “owner”–that is, the application receiving the trigger
press information followed by a “trigger up”. If Double Click is chosen in this menu,
when the trigger is pressed, released, and then pressed again, a “double-click” event
will have occurred. If a mapping with the type Up/down has also been configured
for the same source, it will only receive the first set of trigger events.

104

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Certificate Assignment

Trigger Owner
This identifies the driver or application receiving the trigger presses.

Show All
By default, inactive owners are not shown. By checking this checkbox, all owners,
both active and inactive, are displayed.

5.5.7 Certificate Assignment
•

In the Control Panel, choose the Certificate icon.

Figure 5.8 Certificates Icon
This dialog box is used in conjunction with 802.1x authentication to enhance
8525 G2/8530 G2 security.

For a detailed description about Certificate setup for both the server and client-side
devices (8525 G2/8530 G2s), refer to the following website:

www.microsoft.com/windows2000/techinfo/planning/walkthroughs/default.asp - "Security Services"
Note:

When importing certificates, the 8525 G2/8530 G2 only recognizes
.cer files.
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

105

Chapter 5: Configuration
Narrow Band Radio Setup

5.5.8 Narrow Band Radio Setup
Note:
•

Keep in mind that the Narrow Band icon is only visible in the Control
Panel when a Narrow Band radio is installed in the unit.
In the Control Panel, choose the Narrow Band Radio icon.

Figure 5.9 Narrow Band Icon

5.5.8.1

Info Tab

In the Narrow Band Radio dialog box, the Info tab displays information about the
radio – it cannot be edited.

The Power information in this screen indicates the power of the radio installed in the
unit – 0.5 or 1.0 W. The Serial Number is the identifier for the radio and is used by
the protocol when the “Auto Radio Address” parameter is enabled. The CIS Data
(Card Information Structure) is manufacturer information describing the PC Card
installed in the 8525 G2/8530 G2. DSP x.x / FPGA 0xNN indicates the firmware
revision of the radio’s DSP (x.x) and FPGA (0xNN) where x.x and NN represent
actual revision numbers.
106

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Narrow Band Radio Setup

Statistics Screen

• Tap on Statistics to display the Protocol Statistics screen.
These statistics are updated every second while the dialog box is displayed.

The following table provides a brief description of these statistics:

Statistic

Description

Channel quality. See the description of the “Channel Switch Speed” parameter in the channel tab for more information on how “cq” affects channel
switching (see “Channel Switch Speed” on page 110).

Current channel

Monitor state of RF Link: LOCKED=0, LOCKPENDING=1, LOWCQWAIT=2, SCANNING=3, STARTUP=4, ABANDON=5

Number of received messages, complete application messages

Number of transmitted messages, complete application messages

Number of received polls with attached message

Number of transmitted frames

Number of received radio link aborts

Number of transmitted radio link initialization messages

Number of received polls

Number of transmitted retries

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

107

Chapter 5: Configuration
Narrow Band Radio Setup
pt

Number of poll timeouts

Number of transmitted errors

rssi

Received Signal Strength Indicator

Table 5.1 Protocol Statistics Descriptions

Low Level Screen
•

Tap on the Low Level tab to display the Low Level statistics screen.

Table 5.2 defines the elements of the Low Level statistics screen.

Statistic

108

Description

RxOk

Message buffers discarded due to lack of available receive buffers

RxHd

Message headers successfully received

RxBd

Message bodies successfully received

RxEr

Message buffers received with detected errors

RxOv

Number of transmitted messages, complete application messages

TxOk

Message buffers successfully transmitted

TxEr

Message buffers which failed to transmit

Number of carrier detect changes detected

Coll

Number of collisions detected

Tx D

Actual difference in time (in RTC ticks) between when the most recent transmit (with timestamp) was scheduled to start and when it actually started.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Narrow Band Radio Setup
TxMD

Maximum "Tx D" value

Rx X

Number of extra characters received for last received message (due to delay
in host reporting back actual body size)

RxMx

Maximum "Rx X" value

MChg

Number of completed mode changes

Table 5.2 Low Level Statistics Descriptions

Default All Parameters
•

Tap on the Default all Parameters button to return all registry parameters
to default values.
When this button is pressed, a screen appears asking if you’re sure you want to
return all parameters to their default values.
• Tap on Yes to return values to their default settings.
Note:

5.5.8.2

This button does not default the radio parameters set under the Radio tab.

Channel Tab

Channel Number
This parameter determines the operating radio channel of the 8525 G2/8530 G2.
The allowable range for this parameter is 1 to 20. The default value is 1.
Note:

The Channel Number dropdown menu displays only the channels that
have been enabled in the Channel Enable List.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

109

Chapter 5: Configuration
Narrow Band Radio Setup

Power Up Channel
When this parameter is enabled, the 8525 G2/8530 G2 begins communicating on
the channel specified in the Channel Number parameter when the unit is powered
up. This setting may prevent the migration of 8525 G2/8530 G2s to the same
channel due to uneven coverage in some sites.
If this parameter is disabled (unchecked), the unit will continue communicating on
the same channel that it was on before it was powered off.

Channel Enable List
•

Tap on the Channel Enable List button to display a dialog box listing
available channels.

This dialog box is completed by default with all channels that have frequencies
configured. A checkmark indicates that a channel is enabled. An unchecked check
box indicates that the channel is disabled. The maximum number of channels
supported by the RA1001 Narrow Band radio is 20.
Enabling a channel allows the channel to be set to an operating channel (Channel
Number) and makes it available for channel searching. For example, if Channel 1 is
the operating channel and all other channels are enabled, the 8525 G2/8530 G2 can
roam through all 20 channels.

Channel Switch Speed
This parameter changes the threshold the 8525 G2/8530 G2 uses to determine when
communication quality with a base station is unacceptable. When this threshold is
exceeded, the unit starts channel searching for a new base station.
Setting this parameter to Slow means a higher threshold – the 8525 G2/8530 G2 is
more tolerant of poor communication quality. When the channel quality of the
vehicle-mount radio drops below 46%, the unit monitors the channel quality for 15

110

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Narrow Band Radio Setup
timeout periods before searching for a new channel. If Channel Switch Speed is set
to Fast, the current channel is only monitored for up to 2 time-out periods before
channel switching begins.
Important:

“Fast” switch speed is most effective where coverage areas are
largely overlapping. If the coverage areas barely overlap, have
dead spots, or if the 8525 G2/8530 G2 frequently operates on the
fringe of coverage, this parameter should be set to “Slow”.

Channel Selection
Enabling Manual Select allows you to set the channel search order the
8525 G2/8530 G2 will use if communication quality drops and channel
switching is required. If this parameter is enabled, the 8525 G2/8530 G2 uses
the channel switching lists specified in the Manual Switch Table. If this parameter is
disabled (unchecked), the vehicle-mount uses a standard algorithm to decide which
channel it should switch to in the event of poor channel quality.
Warning:

It is not recommended that the “Manual Select” parameter be used
without a clear understanding of how to order the channel
sequences for optimum performance.

Manual Switch Table
•

Tap on Set Switch Table to display the Manual Switch Table dialog box.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

111

Chapter 5: Configuration
Narrow Band Radio Setup
This feature is used rarely. It is used when the order of channel switching needs to be
tightly controlled. The values in the Channel column are completed for you with the
enabled channels when this dialog box is opened. For each corresponding enabled
channel, the “List” column contains “0,0,0,0,0,0,0,0” values by default.
If communication quality falls below 46%, only the channels entered in the Manual
Switch Table are considered for channel switching. The channel search is carried out
in the order in which the channels were entered in the table.
To configure channel switching order for a particular channel:
• Highlight the channel you want to edit, and tap on Edit Channel List.

Editing The Channel List

Only those channels that are enabled are displayed in the dropdown menus in the
Edit Channel List dialog box. The allowable values range from 0 to 20.
• Tap on the arrow next to dropdown menu to scroll through the available
channels. Highlight the value you want to assign.
• Once you’ve assigned the switching order, tap on OK to close the
dialog box.
The channel list is added to the selected channel in the Manual Switch Table dialog box.

112

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Narrow Band Radio Setup

5.5.8.3

Protocol Tab

Enable Cellular Protocol
The value assigned to this parameter must be identical to the value assigned to the
corresponding parameter in the Psion Teklogix Network Controller, Wireless
Gateway or Base Station. A warm reset of the 8525 G2/8530 G2 is required before
this parameter can take effect.
If Enable Cellular Protocol is disabled (unchecked), the options in the Cellular Radio
Address frame are displayed in grey text indicating that they cannot be accessed.

Cellular Radio Address
Auto Radio Address
If Auto radio address is enabled, the 8525 G2/8530 G2 requests an automatically
assigned radio address. Manual radio address is displayed in grey text indicating that
it cannot be accessed.

Manual Radio Address
The value entered in the Manual Radio Address parameter is used to identify the
8525 G2/8530 G2 over the radio link. A unique value from 1 to 3840 must be
assigned for each unit.
Note:

This parameter is set to ‘0’ (an out-of-range value) by default to block
radio communication when the unit is initially powered up. This prevents
several new terminals from attempting to communicate with the same
default terminal number at initial power up. Once the default value is
changed, it cannot be set back to ‘0’.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

113

Chapter 5: Configuration
Narrow Band Radio Setup

Polling
The default values for the Polling parameters are dependent on the value assigned to
the Modulation / Baud Rate parameter in the Radio tab.

Modulation / Baud Rate

Sync Delay

Window Delay Poll Timeout

4 Level / 19200

4 Level / 9600

2 Level / 9600

2 Level / 4800

Table 5.3 Polling Parameters
Sync Delay
Warning:

This parameter should not be changed from its factory setting
without a clear understanding of radio protocol timing.
The Sync Delay parameter specifies the delay between the base station transmission
and the first response window, measured in milliseconds. The value assigned to this
parameter must be compatible with other terminals and base stations in the system.
The allowable range for this parameter is between 1 and 40.

Window Delay
Important:

The value assigned to this parameter should not be changed from
the factory setting without a clear understanding of the timing of
the radio protocol.
This parameter specifies the amount of time (in milliseconds) the 8525 G2/8530 G2
should add to each response window in order to accommodate the receive/transmit
switching characteristics of the radio. The value assigned must be compatible with
other units and base stations in the system. The default setting of 19 is based on the
requirements of a 2 level modulation narrow band radio, operating at 9600 baud.

Poll Timeout
This parameter (in units of 16.6 ms) sets the time-out value used for automatic
channel switching. “Poll Timeout” is the time during which the 8525 G2/8530 G2
should detect at least one poll from a base station. As each “Poll Timeout” passes
without a successful poll from the base station, the 8525 G2/8530 G2 channel
quality decreases. If the channel quality falls to below 46%, the terminal begins
searching for a new channel.
A value from 1 to 200 can be assigned to this parameter.
114

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Narrow Band Radio Setup

Late TX Limit
The value entered for this parameter (measured in milliseconds) sets the maximum
allowable deviation time from the start of a response window during which an 8525
G2/8530 G2 can make a transmission. After this threshold, the transmission will not
be attempted and the 8525 G2/8530 G2 will try again at the next opportunity. For
example, suppose this parameter is set to 5. From the beginning of the response
window, the 8525 G2/8530 G2 can be up to 5 milliseconds late sending a
transmission. Beyond this threshold, the transmission is not attempted. The
vehicle-mount waits for the next opportunity.
The allowable range for this parameter is from 1 and 10 – the default value is 2.

Test Polling Values
•

Tap on the Test Polling Values button to test the polling values indicated in
this dialog box without committing them to memory.
To commit the new polling values to memory:
• Tap on the OK button – the dialog box is closed and the new values
are saved.
To discard the new values, and retain the existing values:
• Tap on the X button at the top of the dialog box.

5.5.8.4

Power Tab

Enable Power Saving
When this parameter is checked, power saving is enabled.
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

115

Chapter 5: Configuration
Narrow Band Radio Setup

Idle Poll Limit
Note:

The “Idle Poll Limit” parameter is only used when “Enable Power
Saving” is enabled.

This parameter determines how many transmit opportunities – base station polls
with available response windows – must be consecutively skipped before the 8525
G2/8530 G2 places the radio into power-down mode for power saving. The
allowable range for this parameter is from 1 to 200. The default value is 10.
Lower values cause the vehicle-mount to enter power saving mode quickly,
extending battery life but reducing 8525 G2/8530 G2 responsiveness. Higher values
increase responsiveness but decrease battery life.

Power Off Time
This parameter determines the amount of time (in seconds) the 8525 G2/8530 G2
radio stays in power-down mode when a power down period has been initiated.
“Power Off Time” is only used when the “Enable Power Saving” parameter is
enabled.
The allowable range for this parameter is 1 to 60.

5.5.8.5

Radio Tab

Modulation/Baud Rate
The options in the Modulation / Baud Rate dropdown menu are: 2 Level/4800,
2 Level/9600, 4 Level/9600 and 4 Level/19200. The value assigned to this
parameter must be identical to the corresponding parameter in the Psion Teklogix
Base Station. This parameter is stored in the radio’s non-volatile memory. The
default value for Modulation/Baud Rate is 2 Level/9600
116

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Narrow Band Radio Setup

Data Squelch
Data Squelch controls the radio receiver, cutting it off when the signal is too weak
for reception of anything but noise. Receive Signal Strength Indicator values below
the Data Squelch threshold prevent further processing of the receive signal while
higher values allow further processing. The allowable range is 0 to 100 with a
default value of 0.
In noisy environments, this value can be increased to reject noise. In environments
with less noise, this value can be decreased to allow the received signal and increase
range. This parameter is stored in the radio’s non-volatile memory.

Test Squelch
•

Tap on the Test Squelch button to prompt the radio to use the Data Squelch
value without committing it to the radio’s non-volatile memory – in other
words, to ‘test’ the value assigned to the Data Squelch parameter.
To commit the new Data Squelch value to the radio’s non-volatile memory:
• Tap on the OK button – the dialog box is closed and the new value
is saved.
To discard the new value, and keep the old Data Squelch value:
• Tap on the X button at the top of the dialog box. The old value is sent to the
protocol driver.

Frequency Table
•

Tap on the Frequency button to display the Frequency Table dialog box.

•

Tap on the Copy “Receive” to “Transmit” button to copy the contents of
the Receive fields into the corresponding Transmit fields.
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

117

Chapter 5: Configuration
Bluetooth Setup
When you tap on this button, a warning box is displayed asking “Copy all the Rx
frequencies to the Tx frequencies?”
• Tap on Yes to go ahead or No to stop the copy process.

Statistics

• Tap this button to display communication statistics.
Refer to “Statistics Screen” beginning on page 107 for details about this screen.

Advanced
This button launches the Radio Test Application.

5.5.9 Bluetooth Setup
Bluetooth is a global standard for wireless connectivity for digital devices and is
intended for Personal Area Networks (PAN). The technology is based on a
short-range radio link that operates in the ISM band at 2.4 GHz. When two
Bluetooth-equipped devices come within a 2 meter range of each other, they can
establish a connection. Because Bluetooth utilizes a radio-based link, it does not
require a line-of-sight connection in order to communicate.
Note:
•

The Bluetooth radio uses an internal antenna.
In the Control Panel, choose the Bluetooth Device Properties icon to
display the Bluetooth Manager screen.

Figure 5.10 Bluetooth Icon
The Bluetooth Manager dialog box is used to display the other Bluetooth devices
with which you can communicate.

118

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Bluetooth Setup

5.5.9.1
Note:

Scan

•

The Devices Tab
If you intend to configure Bluetooth communication with specific devices
(e.g., a scanner or printer), turn on the devices and bring them within 5
metres of the vehicle-mount before proceeding with the discovery process
described below.

Tap on the Scan button to list available devices.

Wait for the 8525 G2/8530 G2 to complete its scan (approximately 20 seconds).
When scanning starts, the Scan button will change to Stop – if necessary, you can
tap on this button to stop the process. Once scanning is complete, all discovered
devices will be displayed in the list box, with Name, Address, Active status, and
PIN information.
Note:

During the scanning process, addresses are located first, followed by
names. Only the names of devices that are within the Bluetooth radio coverage range will be retrieved.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

119

Chapter 5: Configuration
Bluetooth Setup
The Active column indicates whether any service is activated for that device. When
a service is activated, the device is displayed in the list even when it is not detected
during the scan.
The PIN column indicates whether you have a PIN (password) set for the device.
At this point you can either query for services or set the PIN for each device. Once
you highlight a device in the list box, both the Services and Set PIN buttons become
available.

Services
A discovered device may display several service profiles that it can use to
communicate, and you will want to activate the type you need. Supported profiles
that can be activated include: DUN (Dial-Up Networking service), Printer (serial
service), and LANPPP (LANAccessUsingPPP service). ASync (ActiveSync) is
another available profile.
•

To start the service scan, highlight a device in the Devices tab list, and then
click on the Services button or double-click on the device entry.

Note:

If the remote device is out of reach or turned off, it can take a considerable amount of time for the Services dialog box to appear – it may appear
to be frozen.

Once the device’s service profiles are displayed in the Services list box:
•

Highlight the service to be activated.

• Press [SPACE] or right-click to display the Activation menu.
The Activation menu contains four options – Activate, Authenticate, Outgoing and
Encrypt.
Once the service is successfully activated, the assigned port (if applicable) will
appear in the Port column of the Services list box. You can choose to use BSP or
COM as the port name. BSP is the latest Microsoft Bluetooth stack standard, but
older applications assume serial ports are COM. When using COM as the port name,
the Bluetooth manager will try to find and use a free port between COM7 and
COM9. When using BSP as the port name, BSP2 to BSP9 are available for use. The
port is available as soon as it is activated.
Note:

120

The CH column shows the RFCOMM channel of the service if the
service is RFCOMM-based. This information is not generally needed
except for debugging purposes.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Bluetooth Setup
To add a service to the Outgoing port, an active service must first be deactivated.
Then you can choose the ‘Outgoing’ option from the Activation menu (highlight a
service, right-click or press the [SPACE] bar to display the Activation menu).
The Authentication and Encryption options can be changed only before activation.
To change these after activation, deactivate the service first, then change the options.
Once a service is activated, all the information regarding the service, including the
RFCOMM channel number, is saved in the registry. (Some remote devices may
change their RFCOMM channel numbers when they reboot, so your saved setting
may not work when the remote device is rebooted. In that case, you must deactivate
the service and reactivate it to detect the current RFCOMM channel.)

Set PIN
PINs can be set for each device by pressing the Set PIN button in the Devices tab, or
you can skip this step and try to connect to the device first.
Important:

The remote device must have authentication enabled, otherwise
the PIN authentication will fail.

• Highlight a device, tap on the Set Pin button, and type the PIN.
You will receive a message, either that the PIN has been successfully validated or
that it has been rejected.
If the PIN has been validated, an asterisk (*) appears in the PIN column in the
Devices list box, indicating that this device has a PIN set. Once a PIN is entered, it is
saved in the registry.
To remove the PIN:
• Choose Set PIN, and press [ENTER].
If the 8525 G2/8530 G2 attempts to connect to a remote device that has
Authentication enabled and does not have a required PIN set, an Authentication
Request dialog box is displayed.
•

Enter the PIN, and tap on OK to connect the devices.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

121

Chapter 5: Configuration
Bluetooth Setup

5.5.9.2

The Server Tab

The Bluetooth connection is initiated from your 8525 G2/8530 G2 to the remote
device – therefore the 8525 G2/8530 G2 is called the ‘client’ and the remote is
called the ‘server’. The Servers tab displays the server profiles that can be activated
in your 8525 G2/8530 G2. There is currently one server profile available: Serial.
• Tap on the checkbox to activate the server, and it will display the
associated port name beside the server name.
Once you activate a server profile, it is recommended that the 8525 G2/8530 G2 be
rebooted before you try to bond from a server.
Note:

5.5.9.3

You do not need to reboot if you are deactivating a server.

Outgoing Tab

Outgoing Port acts as a serial port that can be used to connect to a list of Bluetooth
devices (one at a time), but you have the freedom to switch on-the-fly.
The Outgoing Port checkbox allows you to create the Outgoing port. When the port is
created, the Outgoing tab lists the port name.

122

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Bluetooth Setup
The Outgoing list dialog box displays a list of services marked as ‘Outgoing’. The *
column indicates the currently selected service. You can tap on Unselect to reset the
current selection, or you can tap on Select to make a selection. The Remove button
deletes the service from the outgoing list.
The Prompt menu determines the behaviour of the pop-up Selection menu.
Choosing Everytime causes the Selection menu to be displayed each time an
outgoing port is created. If you choose Once, the menu is displayed only when a
partner service is not selected.
To display the Selection menu at any time:
• Press [CTRL] [ALT] [F1], and switch the partner Bluetooth device.
If a connection to a partner device already exists, the connection is dropped and
another connection to the newly selected device is created instantly without
disrupting the application that has opened the outgoing port.
Note:

5.5.9.4

To add a service to the Outgoing port, an active service must first be
deactivated. Then you can choose the ‘Outgoing’ option from the Activation menu (highlight a service, right-click or press the [SPACE] bar to
display the Activation menu).

Active Conn. Tab

The Active Conn. tab lists the Name, Address, and Type of the currently active
connections. The table is periodically updated while on display, but it can take a few
seconds before it reflects the actual list of connections. The Type column of the table
shows ‘ACL’ or ‘SCO’. The Connection list table shows the connections for
scanning as well as the service connections.
Note:

You can change the device-name and description of your radio by clicking
on the System icon in Control Panel, which will open the System ProperPsion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

123

Chapter 5: Configuration
Bluetooth Setup
ties dialog box. Click on the Device Name tab to access the menu and
change your settings. Then click on OK.
Although the name will have changed in the Properties menu in Bluetooth
Controls, the radio only reads it on boot-up. For the changes to take
effect, you must reset the 8525 G2/8530 G2.

5.5.9.5

Properties Tab

The Properties tab displays information about your 8525 G2/8530 G2, and provides
some port options.
The Device Name field shows the device name of your 8525 G2/8530 G2. This
name can be changed (see the Note in this section for details).
Device Class shows the Class of Device (e.g. desktop), which is always set to
vehicle-mount.
Local Bluetooth Address shows the address of your 8525 G2/8530 G2 radio.
Port Prefix is used to set the port name to either BSP or COM. When the name is set
to BSP, BSP2 to BSP9 are available for activated services (including the server).
When COM is chosen, COM7 to COM9 are available.
Name Query Retry governs the number of times the vehicle-mount will attempt to
query the names of other Bluetooth devices if the first attempt fails. (When the
unit scans for other devices, it sometimes fails to scan names.)

124

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Bluetooth Setup

5.5.9.6

Bluetooth GPRS Connection

1. To connect to the internet using a GPRS phone equipped with a
Bluetooth radio, begin by setting up the Bluetooth radio. The setup
information is outlined beginning on page 118. Remember to choose
the modem with which you want your 8525 G2/8530 G2 to communicate from the Scan Device list.
2. To set up the internet parameters, tap on the Network And Dial-up
Connections icon in the Control Panel.

Figure 5.11 Network And Dial-up Connection Icon
3. Tap on the Make New Connection icon.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

125

Chapter 5: Configuration
Bluetooth Setup
4. In the Make New Connection dialog box, choose Dial-Up Connection.
Enter a name for your GPRS network connection.ˆ

5. Tap on Next to display the Modem dialog box.

6. In the dropdown menu labelled Select a modem:, choose the name of
the modem with which you want to connect, and then tap on Configure
to display the Device Properties dialog box.

126

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Bluetooth Setup
The 8525 G2/8530 G2 communicates with your phone and retrieves the
parameters for the Device Properties dialog box. The 8525 G2/8530 G2
then disconnects.

7. Under the Call Options tab, turn off Cancel the call if not connected
within, and press [ENTER] to save your changes.

8. In the Modem dialog box, choose Next to display the Phone Number
dialog box.

The phone number you enter is network carrier dependent. Once you’ve
specified all the necessary information, tap on Finish.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

127

Chapter 5: Configuration
Bluetooth Setup
9. In the Control Panel, tap on the Dialing icon.

Figure 5.12 Dialing Icon
10. The values in the Dialing Properties dialog box need to be edited
according to your network carrier specifications.

Once you’ve edited this dialog box to reflect your network carrier requirements, press [ENTER] to save your changes.
11. At this point, you’ll need to return to the Control Panel and choose the
Network and Dial-up Connections icon.

128

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Total Recall
12. In the network connection window, the new network configuration – in
this case – GPRS Network – is displayed. Tap on the new icon.

Figure 5.13 GPRS Network Connection
•

An onscreen message indicates the status of your connection – opening,
connected, disconnected, error messages, and so on.
Once the onscreen message reads Connected, click on Hide and access the
internet.

5.5.10 Total Recall
Total Recall is a Psion Teklogix utility developed to maintain applications and
setting over cold boots. This utility is based on a backup and restore concept.
• In the Control Panel, choose the Total Recall icon.

Figure 5.14 Total Recall Icon

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

129

Chapter 5: Configuration
Total Recall

5.5.10.1 Creating A Backup Profile

In the dropdown menu, you can choose from four options: Create Backup Profile,
View Selected Profile, Restore Selected Profile and Delete Selected Profile. Keep
in mind however that until a profile is created, the only available option is Create
Backup Profile.

Profile Information

This dialog box lists the possible storage destinations for the profile file.
• To begin, type a name for the profile in the field labelled Profile Name.

130

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Total Recall
The image type – OS Version and Registry Type – for the 8525 G2/8530 G2 is
displayed at the top of the dialog box.
• Tap on the
icon to expand the settings for Profile Type and
Profile Location.

•

For this device only – creates a backup that is manually restored
by the operator.
AutoRestore for this device only – creates a profile that automatically restores itself following a cold boot.
AutoRestore for this and other devices – creates a profile that
automatically restores after resuming from a cold boot, but it
will not contain the touchscreen calibration coordinates or the
Wireless radio settings.
Profile Location – allows the operator to specify where the
profile is to be saved. The location for the profile is either \Flash
Disk or \SD-MMC Card.

Tap on Next to display the next dialog box – Add Files.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

131

Chapter 5: Configuration
Total Recall

Add Files

By default, All Files: is selected so that all installed or copied files, database entries,
and the Registry will be saved. You can, however, limit the backup to database,
and/or the registry only.
The Select Files option allows choose to limit the backup By Individual File, or you
can choose to define which files will be backed up By File Type.

•

132

Tap on Next to view your selections

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Total Recall

View Selections
Depending on what you have selected for inclusion in your profile, you can view a
list of the selected files, databases and/or registry.

•

Tap on Next to perform the operation.

Performing The Backup

•

Tap on Backup to start the process and create a profile.

5.5.10.2 Restoring A Profile
To manually restore a profile:
• Tap on the Total Recall icon.
• Choose Restore Selected Profile from the dropdown menu.
• Choose the Profile Name you want to restore from the Profile Name
dropdown menu.
Note:

You can also manually restore an auto restore profile located in flash or a
storage device.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

133

Chapter 5: Configuration
Input Panel

5.5.11 Input Panel
The 8530 G2 is equipped with at Soft Input Panel (SIP).

Figure 5.15 Input Panel Icon
On the 8530 G2 only, when a keyboard is not connected to the unit, tapping on the
Input Panel button displays a soft input panel (soft keyboard) that can be
customized using the Input Panel dialog box.

Input Panel
Button Icon

Important:

134

If the Input Panel Button icon is not visible in the taskbar,
from the ‘Start’ menu, tap on Settings>Taskbar and Start Menu.
Tap the checkbox next to ‘Show Input Panel Button’. To remove
this icon from the taskbar, tap in the checkbox to erase the
check mark.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Input Panel
•

Tap on the Input Panel Button icon in the taskbar to display the soft input
panel on the 8530 G2 screen. Keep in mind that the soft keyboard is not displayed when a physical keyboard is attached to the vehicle-mount.

Soft Keyboard

API And Rx/Tx LEDs

Input Icon

The soft keyboard operates just like a standard keyboard except that rather than
pressing a key, you tap on letters, numbers, modifier keys, etc. on the 8530 G2 screen.
Note: Two LEDs – API and Rx/Tx – are available in the taskbar below the soft
keyboard. For information about these LEDs, refer to page 47.
To customize the appearance and behaviour of the soft keyboard:
• Tap on the Input Panel icon in the Control Panel.

•

Tap on the Options button to change the appearance of your soft keyboard.
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

135

Chapter 5: Configuration
IPv6 Support

Note:

You can also display this dialog box by double-tapping on the Input icon
in the far-right corner of the taskbar.

Keyboard Size and Type
The options under Keyboard Size and Keyboard Type allow you to alter the size of
the keyboard keys and to choose the keyboard layout of the soft keyboard.

Keyboard Position
Tapping in the checkbox next to Docked locks the soft keyboard in place on the
screen. Leaving this option unchecked allows you to use your stylus to drag the
keyboard around the 8530 G2 screen.

5.5.12 IPv6 Support
The IPv6 Support icon in the Control Panel allows you to activate IPv6 network
support on your unit. This internet protocol specification (version 6) supports
128-bit IP addresses, replacing version 4.

Figure 5.16 IPv6 Support Icon
•
136

Tap on the icon to display the IPv6 Support dialog box.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Scanner Properties Setup

•

Tap on the checkbox next to Enable IPv6 Network Support to enable this
internet protocol.

5.5.13 Scanner Properties Setup
The Teklogix Scanners icon in the Control Panel provides dialog boxes in which you
can tailor bar code options and choose the bar codes your scanner will recognize.

Figure 5.17 Teklogix Scanners Icon

5.5.13.1 Scanner Barcodes

Important:

To improve the decode speed and performance, enable only those
codes that are required by the application.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

137

Chapter 5: Configuration
Scanner Properties Setup
The symbologies listed in the Barcodes tab change to reflect the scanner you choose and
the bar codes it supports. Keep in mind that the items listed in the Barcodes tab are used
to configure external, non-decoded scanners only. Decoded scanners cannot be
configured using the symbologies listed under this tab. See “Decoded Scanners” below
for information about these scanners.

5.5.13.2 Decoded Scanners
While non-decoded scanners are configured through the Scanner Properties dialog
box (refer to “Non-Decoded Scanners” on page 138 for details), decoded scanners
must be configured by scanning special configuration bar codes. In these cases, the
scanner manufacturer provides programming manuals for configuration purposes.
• For Symbol decoded scanners, refer to the LS3408 programming guide.
•
Note:

For PowerScan (PSC) decoded scanners, refer to the Powerscan Programing
Guide (PSC).
For port setup information, refer to “Ports Tab” on page 154.

5.5.13.3 Non-Decoded Scanners

All the available bar code symbologies for this type of scanner can be selected in
this tab.
A ‘plus’ sign (+) to the left of the menu item indicates that a sub-menu of parameters
is attached.

138

•

Tap the stylus on the + sign to display the sub-menu.

•

To change a parameter value, double-tap on the parameter. If you need to
type a value, a dialog box is displayed in which you can type a new value.
If you need to change a yes or no value, double-tapping on the parameter
toggles between yes and no.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Scanner Properties Setup
If you’re using the keyboard:
•

Highlight the bar code you want to work with, and press the [RIGHT]
arrow key to display the sub-menu.

•

Use the [UP] and [DOWN] arrow keys to highlight a parameter.

•

To change a parameter value, press [SPACE] or the [RIGHT] arrow key. If
a field requires text entry, a text box is displayed in which you can enter the
appropriate value.

5.5.13.4 Non-Decoded Options
Dot Time (msec)
The value selected for Dot Time determines (in milliseconds) how long the targeting
dot remains on before the scanner switches to a normal scan sweep. Choosing this
option displays a window in which you can enter a value.

A value of 0 (zero) disables the target dot.

Short Code
When enabled (set to on), this parameter allows scanning of short I 2 of 5 bar codes
(2 characters). When disabled, these short bar codes are rejected.
Enabling Short Code may reduce the robustness of the decoding since the
8525 G2/8530 G2 must decode more potential bar codes; it is therefore not
recommended for general-purpose bar codes with 4 or more characters.

Verify
The value entered for this parameter determines the number of correct additional
decodes required after the initial decode before a bar code is accepted. Higher values
significantly increase the time it takes to decode a bar code but also improve the
reliability of the decoded bar code.
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

139

Chapter 5: Configuration
Scanner Properties Setup

Security
This parameter controls the tolerance for decoding edge-to-edge bar codes
(Code 93, Code 128, UPC/EAN). Lower values have a lower tolerance for
misreads, but they also increase the time it takes to decode the bar code. The default
value of 30 is generally a good compromise setting.

5.5.13.5 Code 39 Settings
Enabled
Set this parameter to on to enable Code 39 or ‘off’ to disable it.

Full Ascii
If this parameter is enabled (set to on), the characters +, %, and / are used as escape
characters. The combination of an escape character and the next character
is converted to an equivalent ASCII character.

Include Check
If this parameter is enabled (set to on), the check digit is included with the decoded
bar code data.

AIAG Strip
If this parameter is enabled (set to on), the AIAG data identifier is removed from
each decoded Code 39 label. The data identifier occurs in the first position next to
the Code 39 start character. It can be a single alphabetic character or a series of
numeric digits followed by an alphabetic character. This identifier defines the
general category or specific use of the data contained in the rest of the bar code.
Note: If your unit is operating with the Psion Teklogix TESS application, this
parameter should not be used in conjunction with the TESS AIAG feature.
This is because the 8525 G2/8530 G2 vehicle-mount performs the strip
function before it processes the data through the AIAG feature; if the prefix is stripped, the data is not identified as AIAG.

Error Accept
If the Err Accept and AIAG Strip parameters are enabled (set to on), all label data
without an AIAG identifier character is accepted. If the Err Accept parameter is
disabled and the “AIAG Strip” parameter is enabled (set to on), the label data
is not accepted.

140

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Scanner Properties Setup

Mod Checks
Tapping on this option displays a list of options.

None
If you choose None, a check is not executed.

Mod 43 Check
If this parameter is enabled (set to on), the Mod 43 check digit is calculated.

Mod 10 Check
If this parameter is enabled (set to on), the Mod 10 check digit is calculated.

Field Size/Chars
Field Size
The field size is the length of the field after the first character is stripped and
the prefix and suffix characters are added. If the field size is non-zero, only
bar codes of that length are passed through.

Prefix Char
This character, if non-zero, is added before a successfully decoded bar code. Press
the key you want to insert in the dialog box attached to this parameter. The
ASCII/Unicode key value of the keypress is displayed.
Pressing the [ESC] key in this dialog box resets the data to zero.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

141

Chapter 5: Configuration
Scanner Properties Setup

Suffix Char
Note:

The appended character is treated as any other keyboard character.
For example, if [BKSP] is pressed, the usual action for that key is
performed. If your unit is operating with the Psion Teklogix ANSI
emulation application, the 8525 G2/8530 G2 transmits the escape
sequence associated with the function immediately after the bar
code data.

This character, if non-zero, is added after a successfully decoded bar code. Press the
key you want to insert in the dialog box attached to this parameter. The
ASCII/Unicode key value of the keypress is displayed.
Pressing the [ESC] key in this dialog box resets the data to zero.

Strip Leading
This parameter determines the number of characters that will be removed from the
beginning of the bar code before the prefix character is added.
Note:

For Code 39 bar codes, the “AIAG Strip” is performed before the
“Strip Leading”.

Strip Trailing
The value entered in this parameter determines the number of characters that will be
removed from the end of the bar code before the suffix character is added.

5.5.13.6 Code 128 Settings
Enabled
Set this parameter to on to enable Code 128 or off to disable it.

Include Sym
Setting Include Sym to on causes the group separator(s) and start code contained in
this type of bar code to be displayed on the screen.
Note:

142

This option is available only when ‘EAN/UCC 128’ is selected.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Scanner Properties Setup

Variations
When using Code 128, you can choose the variation or type of bar code variation the
scanner will recognize. The options available are: Standard, UCC and EAN/UCC.
These options are described below. Choosing Variations displays a window from
which you can choose one of these options.

Standard
Choose Standard if Code 128 is desired.

UCC 128
UCC 128 is a variation of Code 128.

EAN/UCC 128
To successfully scan this type of bar code, EAN/UCC must be enabled.
EAN/UCC 128 bar codes include group separators and start codes.

Field Size/Chars
Refer to the description beginning on page 141 for details.

5.5.13.7 EAN 13 Settings
Enabled
Set this parameter to on to enable EAN 13 or off to disable it.

Enable Bookland EAN
Setting this parameter to on allows your scanner to recognize Bookland EAN
bar codes.

Include Country
If this parameter is enabled (set to on), the country code is included with the
decoded bar code data.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

143

Chapter 5: Configuration
Scanner Properties Setup

Include Check
If this parameter is enabled (set to on), the check digit is included with the decoded
bar code data.

Addendum
Important:

Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 139) must be enabled (set to ‘on).

An addendum is a separate bar code, supplementary to the main bar code. Choosing
this option displays a window from which you can select one of three options.

When Addendum is set to Disabled, the scanner does not recognize an addendum. If
this parameter is set to Optional, the scanner searches for an addendum and if one
exists, appends it to the main bar code. When the parameter is set to Required, the
scanner does not accept the main bar code without an addendum.

Prefix/Suffix Chars
Prefix Char
This character, if non-zero, is added before a successfully decoded bar code.
Choosing this option displays a window in which you can assign a character.

When this window is displayed, press the key you want to insert. The
ASCII/Unicode key value of the keypress is displayed.
Pressing the [ESC] key in this dialog box resets the data to zero.

144

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Scanner Properties Setup

Suffix Char
This character, if non-zero, is added after a successfully decoded bar code. Choosing
this option displays a window in which you can assign a character. When this
window is displayed, press the key you want to insert. The ASCII/Unicode key
value of the keypress is displayed.
Pressing the [ESC] key in this dialog box resets the data to zero.

Strip Leading
This parameter determines the number of characters that will be removed from the
beginning of the bar code before the prefix character is added. Choosing this option
displays a window in which you can assign a value.

Note:

The appended character is treated as any other keyboard character. For
example, if [BKSP] is pressed, the usual action for that key is performed.
If your 8525 G2/8530 G2 is operating with the Psion Teklogix ANSI emulation application, the vehicle-mount transmits the escape sequence associated with the function immediately after the bar code data.

Strip Trailing
The value entered in this parameter determines the number of characters that will be
removed from the end of the bar code before the suffix character is added.

5.5.13.8 EAN 8
Enabled
Set this parameter to on to enable EAN 8 or off to disable it.

Include Check
If this parameter is enabled (set to on), the check digit is included with the decoded
bar code data.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

145

Chapter 5: Configuration
Scanner Properties Setup

Addendum
Important:

Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 139) must be enabled (set to ‘ON’).

Refer to “Addendum” on page 144.

Prefix/Suffix Chars
See “Prefix/Suffix Chars” on page 144.

5.5.13.9 UPC A Settings
Enabled
Set this parameter to on to enable UPC A or off to disable it.

Include Number Sys
If this parameter is enabled (set to on), the number system digit is included with the
decoded bar code data.

Include Check
If this parameter is enabled (set to on), the check digit will be included with the
decoded bar code data.

Addendum
Important:

Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 139) must be enabled (set to ‘ON’).

Refer to “Addendum” on page 144.

Prefix/Suffix Chars
See “Prefix/Suffix Chars” on page 144.

5.5.13.10 UPC E Settings
Enabled
Set this parameter to on to enable UPC E or off to disable it.

146

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Scanner Properties Setup

Convert to UPC-A
Setting this parameter to on results in a non-standard decoding that returns 12 digits
from the 6 digit UPC E bar code.

Include Number Sys
If this parameter is enabled (set to on), the number system digit is included with the
decoded bar code data.

Include Check
When enabled (set to on), the check digit is included with the decoded bar code data.

Addendum
Important:

Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 139) must be enabled (set to ‘ON’).

Refer to “Addendum” on page 144.

Prefix/Suffix Chars
See “Prefix/Suffix Chars” on page 144.

5.5.13.11 Codabar
Enabled
Set this parameter to on to enable Codabar or off to disable it.

Strip Start/Stop Chars
Codabar uses the characters A, B, C, and D as start and stop characters. The first and
last digits of a Codabar message must be A, B, C, or D, and the body of the message
should not contain these characters. Setting this parameter to on strips the start and
stop characters from this bar code.

Field Size/Chars
Refer to the description beginning on page 141 for details.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

147

Chapter 5: Configuration
Scanner Properties Setup

5.5.13.12 Code 93
Enabled
Set this parameter to on to enable Code 93 or off to disable it.

Field Size/Chars
Refer to the description beginning on page 141 for details.

5.5.13.13 Code 11
Enabled
Set this parameter to on to enable Code 11 or off to disable it.

Include Check
If Include Check is enabled (set to on), the check digit is included with the decoded
bar code data.

Check Digits
Choosing this option displays a window in which you can select one of three
options: None, One Check Digit or Two Check Digits.

If this parameter set to One Check Digit, it is assumed that the last digit is a
check digit.
If this parameter is set to Two Check Digits, it is assumed that the last two digits are
check digits.

Field Size/Chars
Refer to the description beginning on page 141 for details.

148

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Scanner Properties Setup

5.5.13.14 Interleaved 2 of 5
Enabled
Set this parameter to on to enable Interleaved 2 of 5 or off to disable it.

Mod 10 Check
If this parameter is enabled (set to on), the Mod 10 check digit is calculated. This
calculation is the same as the Code 39 Mod 10 check digit.

ITF Check
If this parameter is enabled (set to on), the ITF-14/16 Mod10 check digit
is calculated.

Include Check
If this parameter is enabled (set to on), the check digit is included with the decoded
bar code data.

Field Size/Chars
Refer to the description beginning on page 141 for details.

5.5.13.15 MSI Plessey
Enabled
Set this parameter to on to enable MSI Plessey or off to disable it.

One Check Digit
If this parameter is enabled (set to on), it is assumed that the last digit is a
check digit.

Include Check
If this parameter is enabled (set to on), the check digit is included with the decoded
bar code data.

Field Size/Chars
Refer to the description beginning on page 141 for details.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

149

Chapter 5: Configuration
Scanner Properties Setup

5.5.13.16 Discrete 2 of 5
Enabled
Set this parameter to on to enable Discrete 2 of 5 or off to disable it.

Mod 10 Check
If this parameter is enabled (set to on), the Mod 10 check digit is calculated. This
calculation is the same as the Code 39 Mod 10 check digit.

ITF Check
If this parameter is enabled (set to on), the ITF-14/16 Mod10 check digit
is calculated.

Include Check
If this parameter is enabled (set to on), the check digit is included with the decoded
bar code data.

Field Size/Chars
Refer to the description beginning on page 141 for details.

5.5.13.17 IATA 2 of 5
Enabled
Set this parameter to on to enable IATA 2 of 5 or off to disable it.

Mod 10 Check
If this parameter is enabled (set to on), the Mod 10 check digit is calculated.

ITF Check
If this parameter is enabled (set to on), the ITF-14/16 Mod10 check digit
is calculated.

Include Check
If this parameter is enabled (set to on), the check digit is included with the decoded
bar code data.

150

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Scanner Properties Setup

Field Size/Chars
Refer to the description beginning on page 141 for details.

5.5.13.18 Bar Code Options Tab
This tab allows you to tailor the double-click parameters and the display options
associated with your scanner.

Double Click
Click Time (msec)
This parameter controls the maximum gap time (in milliseconds) for a
double-click.
If the time between the first and second clicks of the scanner trigger is within this
time, it is considered a double-click. The allowable range is 0 to 1000. A value of
zero disables this feature.
A double-click produces different results depending on whether or not a value is
assigned in the ‘Click Data’ parameter. When a value is not assigned for the ‘Click
Data’, double-clicking the scanner trigger overrides the target dot delay set in the
‘Dot Time’ parameter and initiates a normal scan sweep. If a value is assigned for
the ‘Click Data’ parameter, double-clicking the scanner trigger inserts the ‘Click
Data’ value rather than initiating a scan.

Click Data
This parameter determines which character is sent to the application installed in
your 8525 G2/8530 G2 following a double-click. A dialog box appears, asking that
you press the key you want to insert. The ASCII/Unicode key value of the keypress
is displayed.
Pressing the [ESC] key in this dialog box resets the data to zero.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

151

Chapter 5: Configuration
Scanner Properties Setup

Display
Scan Result
When this parameter is enabled, the type of bar code and the result of the scan
appear on the screen. Note that this information is only displayed after a successful
decode and is visible only while the scanner trigger is pressed. When the trigger is
released, this information is cleared from the screen.

Scan Indicator
When this parameter is enabled, the laser warning logo appears on the display
whenever the scanner is activated.

Scan Result Time (sec)
The value assigned to the ‘Scan Result Time (sec)’ parameter determines how long
the scan results of a successful scan are displayed on the screen. Time is measured in
seconds, and a value of ‘0’ (zero) disables the parameter. When you choose this
option, a dialog box appears where you can enter a value.
Note:

To remove the scan result from the screen before the “Result Time”
has expired, point the scanner away from the bar code and press
the trigger.

Good Scan Beep And Bad Scan Beep
These parameters determine whether or not the vehicle-mount emits an audible
scanner ‘beep’ when a good (successful) scan or a bad (unsuccessful) scan is
performed. Set these parameters to either on to enable the beeper or off to disable it.

Soft Scan Timeout
This parameter is used by the SDK ‘Scan’ function (soft-scan: starting a scan
session via the SDK function rather than through a physical trigger press). The value
assigned to this parameter determines the soft-scan timeout from 1 to 10 sec.
(default is 3 sec.).

Scan Log File
If this parameter is enabled, the input barcode and the modified/translated output bar
code are logged in the file \Flash Disk\ScanLog.txt. Keep in mind that if this
parameter is enabled, there is a slight performance effect when performing multiple
scans because the log file is written to persistent storage.

152

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Scanner Properties Setup

5.5.13.19 Translations Tab

•

In the Translation tab, choose the Add button.

Input
This value is compared with the decoded bar code reading. If there is a match, the
Output string is translated into the decoded bar code.

Output
If there is a match between the decoded bar code and the corresponding Input string,
the decoded bar code will be translated into the Output string. This string entry
parameter can be null, or it may contain any combination of standard and special
characters (e.g., function keys, [ENTER], etc.).

Type
The value chosen from this dropdown menu determines what is compared with
the decoded bar code reading – the beginning of decoded bar code, the end of
decoded bar code, the entire decoded bar code or anywhere within the decoded
bar code (default).
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

153

Chapter 5: Configuration
Scanner Properties Setup

5.5.13.20 Ports Tab
While you cannot configure external decoded scanners, you can configure
communications with a serial decoded scanner using the options in this tab

5.5.13.21 Tether Port (COM 1)

Baud
Double-tapping on this parameter displays a pop-up window in which you can
choose an appropriate baud rate.

Data Bits
This parameter determines the number of bits for the data going through this port.
Double-tapping on this option displays a pop-up window in which you can choose
either 7 or 8 data bits.

154

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
Scanner Properties Setup

Parity
This parameter determines the type of parity checking used on the data going
through the tether port. Double-tapping on this option displays a pop-up window in
which you can choose the appropriate Parity.

Stop Bits
This parameter specifies the number of stop bits – 1, 1.5 or 2 – used for
asynchronous communication.

5.5.13.22 Serial Port (COM 2)

Enabled
This parameter must be set to on in order for the 8525 G2/8530 G2 to recognize the
device connected to the serial port.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

155

Chapter 5: Configuration
Scanner Properties Setup

Power
Double-tapping on this parameter displays and dialog box in which you can choose
from a number options – you can disable (turn off) this port, or you can assign 5V or
12V power to the port.

Baud
Double-tapping on this parameter displays a pop-up window in which you can
choose an appropriate baud rate.

Data Bits
This parameter determines the number of bits for the data going through this port.
Double-tapping on this option displays a pop-up window in which you can choose
either 7 or 8 data bits.

156

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
SNMP (Simple Network Management Protocol) Setup

Stop Bits
This parameter specifies the number of stop bits – 1, 1.5 or 2 – used for
asynchronous communication.

5.5.14 SNMP (Simple Network Management Protocol) Setup
Simple Network Management Protocol (SNMP) is the protocol used to monitor and
manage devices attached to a TCP/IP network (providing they support SNMP).
SNMP uses Management Information Bases (MIBs) that define the variables an
SNMP Network Management Station can access. Each product has a defined set of
MIBs that determine how SNMP operates, the type of access allowed and so on.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

157

Chapter 5: Configuration
SNMP (Simple Network Management Protocol) Setup
All Psion Teklogix products support the TEKLOGIX-GENERIC-MIB – a MIB that
defines some common features across Teklogix products. All devices also support
MIB-II, a management information base that defines the common features of
TCP/IP networks. The SNMP Agent software embedded in the 8525 G2/8530 G2
product supports SNMPv1 (RFC 1157).
• In the Control Panel, choose the SNMP icon.

Figure 5.18 SNMP Icon
The SNMP dialog box is displayed.

5.5.14.1 Contacts Tab

Contact
This field identifies the contact person for this managed node along with
information about how to get in touch with this person. The content of this
parameter is accessible through MIB-II’s sysContact object.

Location
This parameter is used to identify the physical location of this node (e.g., Warehouse
A: Pillar 32B). The content of this parameter is accessible through MIB-II’s
sysLocation object.
158

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
SNMP (Simple Network Management Protocol) Setup

5.5.14.2 Communities Tab

The Communities tab provides a means of limiting access to SNMP managed
devices to those SNMP Managers with matching “community names”, as specified
by RFC 1157.

Enable SNMP
Enabling Enable SNMP allows the device to respond to SNMP queries and to send
Traps. After enabling this option and rebooting the device, the SNMP Agent will
automatically start up. To disable this feature, remove the check mark from the
check box.

Adding A Community
•

Tap on Add to add a new ‘community’.

Name
The value assigned here is the name assigned by the network administrator to the set
of devices to which this managed node belongs.

Rights
This menu allows you to specify access – that is, ‘Read-Only’ or Read-Write’

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

159

Chapter 5: Configuration
SNMP (Simple Network Management Protocol) Setup

Modifying A Community Setting
To modify an existing community:
•

Highlight the community you want to alter.

•

Tap on Change.

A Modify Community dialog box is displayed, listing the community
you highlighted.
•

Edit the Name and/or Rights, and press [ENTER] to save your changes.

Removing An Existing Community
•

Highlight the community you want to remove in the Communities tab and
then tap on the Remove button.
A Delete Confirmation screen is displayed.
• To remove a community, tap on Yes, or
If you decide not to remove the community, tap on No.

5.5.14.3 Trap Destination Tab
A trap is an unsolicited report sent to SNMP Managers by the SNMP Agent running
on the managed node. This option allows you to define where the report will be sent.

160

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
SNMP (Simple Network Management Protocol) Setup

Enabling Authentication TRAPS
Enabling Enable Authentication TRAPS allows authorization traps to be sent when
a failure is detected (e.g., an SNMP message received with a bad community name).

Adding A Destination
To add a new destination:
• Tap on the Add button.

•

Type a destination in the text box provided, and press [ENTER].

Changing A Destination
To change an existing trap destination:
• Highlight the destination you want to alter in the Trap Destination tab, and
then tap on the Change button.
A dialog box like the one displayed when you add a destination is displayed.

•

Make the changes to the destination, and tap on OK to save the changes.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

161

Chapter 5: Configuration
SNMP (Simple Network Management Protocol) Setup

Removing A Trap Destination
To remove a trap destination:
• In the Trap Destination tab, highlight the destination you want to delete.
• Tap on the Remove button.
A Delete Confirmation screen is displayed.
• To remove a destination, tap on Yes, or
If you decide not to remove the destination, tap on No.

5.5.14.4 Permitted Hosts Tab
For security reasons, the Network Administrator may want to restrict SNMP-node
access to a known sub-set of SNMP Managers. This tab lists the IP addresses of all
the SNMP Managers which are allowed to monitor and manage this device. If no
entries are listed, the device will accept SNMP queries from any host.

Adding A Host
To add a new host:
• Tap on the Add button.

•

162

Type a new host IP address in the text box provided, and press [ENTER].

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 5: Configuration
SNMP (Simple Network Management Protocol) Setup

Changing A Host
To change an existing host IP address:
•

Highlight the IP address you want to alter in the Permitted Hosts tab, and
then tap on the Change button.
A dialog box like the one displayed when you add a host is displayed.
•

Make the necessary changes, and press [ENTER].

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

163

PERIPHERAL DEVICES & ACCESSORIES
6.1 External Bar Code Readers . . . . . . . . . . . . . . . . . . . .
6.1.1 PowerScan™ Standard, LR and XLR Bar Code Scanners .
6.1.2 Entering Data With The Bar Code Reader . . . . . . . . .
6.2 Bluetooth Peripherals . . . . . . . . . . . . . . . . . . . . . . .
6.3 8525 G2/8530 G2 Mounting Accessories. . . . . . . . . . . . .
6.3.1 8525 G2/8530 G2 Mounting Recommendations . . . . . .
6.3.2 Installing The Cradle And Cradle Mounting Plate . . . . .
6.3.3 Installing The MT34XX RAM Mounting Kit . . . . . . .
6.3.3.1 Preparation . . . . . . . . . . . . . . . . . . . . .
6.3.3.2 Installation . . . . . . . . . . . . . . . . . . . . .
6.3.3.3 Positioning The Vehicle-Mount . . . . . . . . . .
6.3.3.4 Component Part Numbers . . . . . . . . . . . . .
6.3.4 8530 G2 Keyboard Mounting Options . . . . . . . . . . .
6.3.4.1 Keyboard Mounting Cradle . . . . . . . . . . . .
6.3.4.2 Keyboard RAM Mount . . . . . . . . . . . . . .
6.3.5 Wiring Guidelines . . . . . . . . . . . . . . . . . . . . .
6.3.6 8525 G2/8530 G2 Installation In High Voltage Vehicles . .
6.3.7 8525 G2/8530 G2 Installation In Vehicles . . . . . . . . .
6.3.8 Wiring Vehicle Power To The 8525 G2/8530 G2 . . . . .

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

6
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.167
.167
.167
.167
.168
.168
.169
.171
.171
.172
.176
.176
.177
.177
.178
.178
.179
.179
.180

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

165

Chapter 6: Peripheral Devices & Accessories
External Bar Code Readers

6.1 External Bar Code Readers
6.1.1 PowerScan™ Standard, LR and XLR Bar Code Scanners
The 8525 G2/8530 G2 supports Psion Teklogix’ PowerScan™ industrial bar code
scanner with standard, long range and extra long range options.
To connect this scanner to the 8525 G2/8530 G2, attach the device to the tether port.
Review your “PowerScan Programing Guide (PSC)” before you begin.

6.1.2 Entering Data With The Bar Code Reader
Note:

For helpful scanning tips, refer to “Scanning Techniques” on page 52.

When a label is scanned successfully, the 8525 G2/8530 G2 will beep if configured
appropriately and the scan LED will flash. Occasionally, the bar code labels are
poorly printed or damaged and cannot be read properly. In this case, use the
keyboard to enter data from the label.

6.2 Bluetooth Peripherals

All 8525 G2/8530 G2 are equipped with Bluetooth radios, making it is possible to
communicate with a variety of Bluetooth peripherals, including GSM/GPRS
handsets, scanners, printers, and so on. The range of the Bluetooth radio in the
8525 G2/8530 G2 is limited to between 2 and 5 meters.
Psion Teklogix provides built-in support for the Bluetooth peripherals listed below.
• GSM/GPRS tri-band universal handset
• Bluetooth printer
Keep in mind that Bluetooth and IEEE 802.11g radios both operate in the 2.4GHz
band. Although the 8525 G2/8530 G2 includes features to minimize interference,
performance of the system will not be optimal if you use both radios simultaneously.
Typically, when both radios operate in the 8525 G2/8530 G2 at the same time, they
cannot transmit simultaneously – this has a negative impact on overall system
throughput. To minimize the impact on the backbone 802.11g network, Psion
Teklogix recommends using Bluetooth peripherals that have low transaction rates
(such as printers and scanners).
Bluetooth peripherals are configured using the Bluetooth control panel applet. Refer
to “Bluetooth Setup” on page 118 for information about setting up your Bluetooth
devices for communication. In addition, review the manual shipped with your
Bluetooth device to determine the method used to associate with the 8525 G2/
8530 G2 host.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

167

Chapter 6: Peripheral Devices & Accessories
8525 G2/8530 G2 Mounting Accessories

6.3 8525 G2/8530 G2 Mounting Accessories
Note:

Because the 8530 G2 has a detachable keyboard, keyboard mounting
equipment is available for this model.

The 8525 G2 and the 8530 G2 are secured using the same mounting equipment.
There are two mounting options:
• Quick-Release Mount, includes two adaptor plates, quick release and cradle
mount (along with necessary hardware) – Kit PN 1008424
• RAM Mount

6.3.1 8525 G2/8530 G2 Mounting Recommendations
Warnings:

Before mounting an 8525 G2/8530 G2 in a vehicle, there are a
number of operator safety issues that require careful attention. An
improperly mounted 8525 G2/8530 G2 may result in one or more of
the following: operator injury, operator visibility obstruction, operator distraction and/or poor ease of egress for the operator. Psion
Teklogix strongly recommends that you seek professional mounting
advice from the vehicle manufacturer.
Cable routing within a vehicle cab also requires careful consideration, especially for separately tethered scanners and other devices
with loose cables. If you are unable to obtain suitable advice,
contact Psion Teklogix for assistance (see "Appendix A: Support
Services and Worldwide Offices" at the end of this document). Note
also that for better protection, the equipment should be mounted
inside the vehicle roll cage.
Use of the Powered Fork Lift Cradle while charging the fork truck
battery is prohibited.

Important Safeguards
•
•
•
•

168

To avoid possible injury, this device must be properly secured when in a
moving vehicle.
Keep this device away from magnetic fields.
Do not place the computer near a television or radio receiver.
Do not disassemble your 8525 G2/8530 G2 computer—there are no userserviceable parts inside.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 6: Peripheral Devices & Accessories
Installing The Cradle And Cradle Mounting Plate

6.3.2 Installing The Cradle And Cradle Mounting Plate
Mounting Kit PN 1008424

Adaptor Plate PN 1008444

Adaptor Plate

Cradle Mounting Plate and Quick Release
PN 1080363 and PN 17529

Figure 6.1 Quick Release Mount Installed
First, the 8525 G2/8530 G2 must be attached to the cradle (Figure 6.2 on page 169).
To do this:
• Place the terminal in the cradle so that the ports face away from the quick
release fasteners.
• Match the side screw holes on the 8525 G2/8530 G2 with the appropriate
pairs of holes on the cradle and screw them together. The choice of holes
determines the angle at which the terminal tilts.
Screw Holes

29.8 c.4m5 in.
11
Fron Tabs
t

Quick Release
Fasteners

5.25 cm
2 in.

Bac

cm
.75 n.
10 .25 i
4

Figure 6.2 Mounting Cradle And Quick Release
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

169

Chapter 6: Peripheral Devices & Accessories
Installing The Cradle And Cradle Mounting Plate

Installing The Cradle Mounting Plate
Next, the cradle mounting plate must be attached to the vehicle. The cradle
mounting plate shown in Figure 6.3 holds the 8525 G2/8530 G2 and cradle in place.
• Screw the cradle mounting plate onto the vehicle using the four 1/4" holes.
Note:

The bolts used for all installations are SAE 1/4-20.
Post

Fro

25.4 cm10.0 in.

Tab
Guides

cm
13 in.
5
Figure 6.3 The Cradle Mounting Plate

Attaching The Cradle To The Cradle Mounting Plate
Next, the 8525 G2/8530 G2 and cradle must be attached to the cradle
mounting plate.
• Align the tabs on the front of the cradle to the tab guides on the mounting
plate and push the cradle back and down.
• Slide the fasteners on the back of the cradle until they snap to the posts on
the mounting plate.
Warning:

170

Never operate the vehicle if the quick release fasteners are
not locked.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 6: Peripheral Devices & Accessories
Installing The MT34XX RAM Mounting Kit

6.3.3 Installing The MT34XX RAM Mounting Kit
Warning:

Failure to install the mount correctly or any attempt to modify the
mount may result in serious injury or damage to property. Contact
Psion Teklogix Technical Support or your Psion Teklogix representative if you have problems installing this mount.
To ensure operator safety, you must use a calibrated torque wrench
and the supplied mounting hardware when fastening the cradle
and mount. Use of this mount in vehicles driven on public roads or
highways is prohibited. Contact Psion Teklogix for further details.

6.3.3.1

Preparation

This articulating mount can be installed in a wide variety of orientations (see
Figure 6.9 on page 176).
1. Select the best orientation for your specific application. Preferred orientations maintain the centre of mass of the vehicle-mount assembly,
directly over the centre of the base (see Figure 6.4).

Figure 6.4
The tilt and rotation of the cradle can be adjusted by the operator. Keep in
mind that if the handscrew is loosened, the cradle can slip causing harm to
the operator or damage to equipment. Also note that under extreme vibraPsion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

171

Chapter 6: Peripheral Devices & Accessories
Installation
tion, the mount may slowly ‘settle’. Occasional readjustment and tightening
of the handscrew may be required. Psion Teklogix offers a tightening tool
(PN 9000594) which can be used to minimize settling (see Figure 6.5).

Figure 6.5
The platform on which you secure the vehicle-mount must be strong
enough to support 25 kg. Never attach the mount to a plastic dash or a
wooden platform without the appropriate backing plate and bracing. In
addition, you must provide operator access at the top, bottom and sides
of the unit.

6.3.3.2

Installation

Figure 6.6 on page 173provides a diagram and a legend to help you attach the
mounting bracket to the vehicle-mount and attach the RAM Vesa base.
1. Attaching the mounting bracket to the vehicle-mount: The kit provides four screws and washers that are used to secure the mounting
bracket to the vehicle-mount. Place screw (D) through washer (C) and
mounting bracket (B) and affix to the vehicle-mount (A). Torque to
23 in-lbs.
2. Attaching the RAM base to the mounting bracket: Apply Loctite
243 to screw (G) threads. (Note that Loctite is not supplied by Psion
Teklogix). Place screw (G) through washer (F), RAM Vesa base (E)
and affix to mounting bracket (B), securing screws and washers in all
four drilled holes. Torque to 26 in-lbs.

172

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 6: Peripheral Devices & Accessories
Installation

Figure 6.6
3. Securing the RAM Base to the local platform and attach RAM
Standard Arm: Use the supplied bolt hole pattern to drill the required
holes in the local platform. Hole diameters must not exceed 10mm
[13/32 inches]. Hardware (F, L, M and N) for securing RAM Bases (E
or J) to the local platform are recommended sizes. If replacement hardware is required, it should be consistent with these diameters. All fasteners must use a suitable locking mechanism to ensure that they do not
loosen under shock and vibration.
•
•

If you are assembling with RAM Vesa Base, see Figure 6.7 on
page 174.
If you are assembling with RAM Circular Base, see Figure 6.8 on
page 175.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

173

Chapter 6: Peripheral Devices & Accessories
Installation
4. For the RAM Vesa Base, in four places, insert screw (M) through the
RAM Vesa Base (E), the local platform and the washer (F). Affix with
nut (N). Torque to 26 in-lbs. Secure RAM Standard Arm (H) by inserting RAM Balls in to both ends of arm sockets.

Figure 6.7 RAM Vesa Base

174

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 6: Peripheral Devices & Accessories
Installation
5. For the RAM Circular Base, in four places, insert screw (L) through
the RAM Circular Base (J), the local platform and the washer (F). Affix
with nut (N). Torque to 26 in-lbs. Secure RAM Standard Arm (H) by
inserting RAM Balls in to both ends of sockets.

Figure 6.8 RAM Circular Base

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

175

Chapter 6: Peripheral Devices & Accessories
Positioning The Vehicle-Mount

6.3.3.3

Positioning The Vehicle-Mount

Position the vehicle-mount into an angle that best corresponds to RAM hardware
used (see Figure 6.9) and tighten by hand until secure. Mount orientations shown in
Figure 6.9 are considered the preferred configurations for the Circular Base to
platform and Vesa Base to platform.

Figure 6.9 Circular Base and Vesa Base Mount Orientations

6.3.3.4

Component Part Numbers

The table below lists the mounting component part numbers.

Legend
Item
B

176

Psion Teklogix
Part Number

Description
Mounting Bracket

1008442

Washer M6 Internal Tooth

9004501

Screw M6 x 12 Hex Head

9008799

RAM Vesa Base

9001934

Washer M8 Internal Tooth

9008800

Screw M8 x 12 Pan Head

9004517

RAM Standard Arm

9001805

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 6: Peripheral Devices & Accessories
8530 G2 Keyboard Mounting Options

Legend
Item

Psion Teklogix
Part Number

Description

RAM Circular Base

9001804

Screw M8 x 25 Flat Head

9004522

Screw M8 x 25 Pan Head

9004518

Nut M8 x 1.25

9008801

6.3.4 8530 G2 Keyboard Mounting Options
Because the 8530 G2 vehicle-mount is equipped with an external keyboard, a
number of keyboard mounting options are available.

6.3.4.1
•
•

Keyboard Mounting Cradle
Use the four screws provided to secure the keyboard to the mounting plate
(PN 1008446).
Insert the screws into the side of the mounting cradle to secure the mounting plate to the cradle (PN 1080363).
Mounting Plate PN 1008446

Mounting Cradle PN 1080363

Cradle Mounting Plate
PN 17529

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

177

Chapter 6: Peripheral Devices & Accessories
Keyboard RAM Mount

6.3.4.2

Keyboard RAM Mount
RAM Mount Kit PN 1008447
Vesa Plate
PN 9001934

4 inch RAM Mount
PN 9001932
RAM Ball End
PN 9001804

You can install two vesa plates or one each of a vesa plate and a RAM ball end to the
RAM mount.
With the keyboard RAM ball end or vesa plate(s) installed on the RAM mount:
• Attach the RAM mount to a standard cradle (PN 1008442) using the hardware included with your kit.
• Attach the other end of the mount to almost any surface. The ball
design allows both ends of the RAM mount to be angled to suit the
operator's needs.

6.3.5 Wiring Guidelines
Before installing the cables between the computer and other devices, consider
the following:
• Ensure the vehicle body and underlying wiring is not damaged while drilling mounting holes.
• Protect cable runs from pinching, overheating and physical damage.
• Use grommets to protect cables that pass through metal.
• Use plastic straps and tie-downs to secure cables and connectors in their
desired location, away from areas where they may get snagged or pulled.
• Keep the cables away from heat sources, grease, battery acid, and other
potential hazards.

178

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 6: Peripheral Devices & Accessories
8525 G2/8530 G2 Installation In High Voltage Vehicles
•
•
Note:

Keep the cables away from control pedals and other moving parts that
may pull on the cables or interfere with the operation of the vehicle.
Leave enough slack on the cables so that the computer can be removed
easily for maintenance.
Make sure the cables run inside the roll cage of the vehicle.

6.3.6 8525 G2/8530 G2 Installation In High Voltage Vehicles
Warning:

Voltages exceeding 60VDC are considered hazardous. For
8525 G2/8530 G2 installations on vehicles with batteries above
this voltage, ensure the 8525 G2/8530 G2 power connector is
mounted in a secure location out of the vehicle operator’s reach.
Due to the hazardous voltages present on these vehicles, it is necessary to ensure
that the unit’s power supply cable connector is not accessible to the vehicle operator,
and is not exposed to water or other liquids. To accomplish this:
• Ensure the power connector is installed in a dry location on the vehicle,
away from the vehicle operator’s reach (perhaps under a vehicle dash or in a
sealed housing).
• Cover the power connector with waterproof heat shrink material.
• Wrap the connector securely with waterproof electrical tape in an area out
of the vehicle operators reach.
All other installation requirements outlined in this document should also be
followed for High Voltage vehicles to insure safe installation and operation of the
8525 G2/8530 G2 vehicle-mount.

6.3.7 8525 G2/8530 G2 Installation In Vehicles
Note:

The metal chassis of the 8525 G2/8530 G2 is equipped with a ground lug
(located on the underside of the 8525 G2/8530 G2, beside the cable management bar) to provide an additional ground to the vehicle, if desired.
The grounding strap must connect from the ground stud on the vehiclemount to a solid, reliable contact point on the main portion of the vehicle
chassis. It must not be connected to battery negative or a terminal block.

As with other vehicle cables, the routing of the ground strap should be carefully
considered to ensure it does not pose a hazard to the operator or the safe operation of
the vehicle. If necessary, secure the ground strap with cable ties or some other
mechanical means to prevent loops or loose lengths of wire from catching on
stationary items when the vehicle is in motion.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

179

Chapter 6: Peripheral Devices & Accessories
Wiring Vehicle Power To The 8525 G2/8530 G2

6.3.8 Wiring Vehicle Power To The 8525 G2/8530 G2
Warning:

The 8525 G2/8530 G2 accepts DC power sources between 10V
and 90VDC nominal.
Applying a voltage above 90VDC or reversing polarity may
result in permanent damage to the 8525 G2/8530 G2 and will void
the product warranty.

A 1.8 meter (6 ft.) extension power cable (PN 13985-302 std or –301 display off) is
supplied with your 8525 G2/8530 G2. This cable should be wired to a filtered, fused
(maximum 10A) accessory supply on the vehicle. The 8525 G2/8530 G2 draws no
more than 8A (less if the accessory supply is greater than 12V). Any additional
wiring (minimum 18 gauge), connectors or disconnects used should be rated for at
least 90 VDC, 10A.
When connecting PN 13985-301 (display-off version), ensure that the screen
blanking wires (clearly labelled) and the power wires (red/black leads) are reliably
secured away from each other, or are separated with reliably secured certified
insulation. Minimum 2.8mm distance, or 0.4mm distance through insulation is
required for the separation.
The red lead of the power cable attaches to the positive vehicle supply. The black
lead connects to the negative supply – this should be connected to a proper terminal
block and not to the vehicle body. The 8525 G2/8530 G2 is fully isolated and can be
used with both negative and positive chassis vehicles.
You may have the option of connecting power before or after the ‘key’ switch.
It is preferable to wire the 8525 G2/8530 G2 after the key switch – that is, the
8525 G2/8530 G2 cannot be switched on without turning the vehicle key on.
However, if the operator switches the key off repeatedly for long periods during a
shift, it may make more sense to wire the 8525 G2/8530 G2 before the switch.
Keep in mind that the 8525 G2/8530 G2 will continue to operate with or without
vehicle power as long as its back up battery has sufficient charge.
If an unfused power source must be used, a fuse assembly (PN 19440) must be
added to the extension power cable (the fuse and instructions are supplied with the
cable). Use only a 10A slow blow UL approved fuse in the fuse assembly. The fuse
assembly must be located as close as practical to the DC supply, and shall connect to
the positive side of the DC supply.

180

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

SPECIFICATIONS
7.1
7.2
7.3
7.4
7.5

8525 G2/8530 G2 Vehicle-Mount Specifications .
Radio Specifications . . . . . . . . . . . . . . .
Bar Code Scanning . . . . . . . . . . . . . . . .
External Scanners . . . . . . . . . . . . . . . . .
Internal Lithium-Ion Battery . . . . . . . . . . .

.
.
.
.
.

.183
.184
.185
.186
.186

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

181

Chapter 7: Specifications
8525 G2/8530 G2 Vehicle-Mount Specifications

Note:

Performance specifications are nominal and subject to change
without notice.

7.1 8525 G2/8530 G2 Vehicle-Mount Specifications
Size

•
•

8525 G2:298mm W x 117mm D x 294mm L (11 3/4" x 4 5/8" x 11 1/2")
8530 G2:Terminal – 298mm W x 117mm D x 294mm L
(11 3/4" x 4 5/8" x 11 1/2")
Keyboard – 292mm W x 38mm D x 127mm L (11 1/2" x 1 1/2" x 5")

Weight

Approximately 4.3 kg (9.5 lbs)
8530 G2 keyboard: approximately 0.91 kg (2 lbs)

Environmental
Standard Temperature Unit
Operating Temperature
Storage Temperature
Rain And Dust Resistance
Humidity
3 axis Vibration
3 axis Shock
Freezer Unit
Temperature Range
Storage Temperature
Rain And Dust Resistance
Humidity
3 axis Vibration
3 axis Shock

-20° C to 60° C (-4° F to 140° F)
-35° C to 70° C (-31° F to 158° F)
IEC 529, classification IP66.
5% - 95% RH non-condensing
1.5g RMS PSD (4 - 500 Hz)
30g 11ms saw tooth.
-30° C to 60° C (-22° F to 140° F)
-35° C to 70° C (-31° F to 158° F)
IEC 529, classification IP66.
5% - 95% RH condensing
1.5g RMS PSD (4 - 500 Hz)
30g 11ms saw tooth.

Approvals

Safety

UL 60950-1, CAN/CSA-C22.2 NO. 60950-1 LVD
EN 60950-1
EMC
FCC Part 15 Class B
- Complies with European R & TTE Directive.
* Note this product will carry the CE Mark.
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

183

Chapter 7: Specifications
Radio Specifications

7.2 Radio Specifications
Marvell 802.11g Direct Sequence Spread Spectrum (Model Number RA2040)
Form Factor
Antenna Port
Transmit Power
Frequency Range
Channels
RX Sensitivity

Data Rates

Compact Flash
Single U.FL jack, no diversity
20mW
2.400 - 2.4835GHz
1 to 11 for USA, Canada
1-13 for EU countries
(8% FER, 1024 bytes packet) =
-89dBm @ 1Mbps, -87dBm @ 11Mbps,
-83dBm @ 6Mbps, -72dBm @ 54Mbps
6, 9, 12, 18, 24, 36, 48 & 54Mbps

Summit 802.11g Direct Sequence Spread Spectrum (Model Number RA2041)
Form Factor
Antenna Port
Transmit Power
Frequency Range
Channels
RX Sensitivity

Data Rates

184

Compact Flash

Two Hirose U.FL connectors for antenna
diversity
30mW
2.400 - 2.4897GHz
FCC: 11
ETSI: 13
TELEC: 13
-96 dBm @ 1Mbps, -95 dBm @ 2Mbps, -94 dBm
@ 5.5Mbps, -94 dBm@ 6Mbps, -91 dBm @
9Mbps, -90 dBm @ 11Mbps, -88 dBm @ 12Mbps,
-86 dBm @ 18Mbps, -83 dBm @ 24Mbps, -78
dBm @ 36Mbps, -76 dBm @ 48Mbps, -75 dBm
@ 54Mbps
6, 9, 12, 18, 24, 36, 48 & 54Mbps

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Chapter 7: Specifications
Bar Code Scanning

RA1001A - Narrow Band Radio
Psion Teklogix Proprietary Narrowband Modulation (2/4 level FSK)
Type III PC Card Form Factor
Transmit Power
1W or 0.5W
Frequency Range
403-422MHz, 419-435MHz, 435-451MHz,
450-470MHz, 464-480MHz,
480-496MHz, 496-512MHz
Rx Sensitivity
< -110dBm @ 19.2kbps (4 level FSK)
Data Rates
4800bps, 9600bps, 19.2kbps

Bluetooth Radio

Embedded (USB interface)
Bluetooth Version
1.2 compliant (features Adaptive Frequency
Hopping for better co-existence with 802.11 radio)
Chip Antenna
2dBi peak
Transmit Power
-3dBm (0.5mW) minimum, +4dBm (2.5mW) max
Frequency Range
2.400 - 2.4835GHz
RX Sensitivity
-80dBm max
(BER<=0.1%)
Data Rate
732.2kbps and 57.6kbps asymmetric,
433.9kbps symmetric

7.3 Bar Code Scanning
Scanner Types
Decoded and non-decoded.
Non-Decoded Codes Supported Code 39, code 128, EAN 13, EAN 8,
EAN 128, UPC-A, UPC-E, Codabar,
Code 93, Code 11, Interleaved 2-of-5,
MSI/PLESSY, Discrete 2-of-5.
Decoded Codes Supported
Dependent on external scanner choice.
Code Discrimination
Automatic for all selected codes,
Non-Decoded input. Decoded input is external
scanner dependent.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

185

Chapter 7: Specifications
External Scanners

7.4 External Scanners
Supported Types
Interface

Decoded and Non-Decoded 5V or 12V. (Refer to
“Power” on page 156 for details.)
Via tether port.

7.5 Internal Lithium-Ion Battery
Not user accessible.
Technology

186

12.6V Lithium-Ion (Li-Ion) backup battery

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

APPENDIX

SUPPORT SERVICES AND WORLDWIDE OFFICES
Psion Teklogix provides a complete range of product support services to its
customers worldwide. These services include technical support and product repairs.

A.1 Technical Support
For technical support in North America:
Call Toll free: +1 800 387 8898 Option 3 or
Direct Dial:
+1 905 813 9900 Ext. 1999 Option 3
For technical support in EMEA (Europe, Middle East and Africa), please contact
the local office listed in the website below:
http://www.psionteklogix.com/EMEASupport
For technical support in Asia, contact the local office listed in the website below:
http://www.psionteklogix.com
Technical Support for Mobile Computing Products is provided via email through
the Psion Teklogix customer and partner extranets. To reach the website, go to
www.psionteklogix.com, and click on the appropriate Teknet link on the home page.
Then click on the “Login” button or the “Register” button, depending on whether
you have previously registered for Teknet. Once you have logged in, search for the
“Support Request Form”.

A.2 Product Repairs
For repair service in North America:
Call Toll free: +1 800 387 8898 Option 2 or
Direct Dial:
+1 905 813 9900 Ext. 1999 Option 2
For repair service in EMEA (Europe, Middle East and Africa), please contact the
local office listed in the website below:
http://www.psionteklogix.com/EMEASupport
For repair service in Asia, contact the local office listed in the website below:
http://www.psionteklogix.com
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

A-1

Appendix A: Support Services And Worldwide Offices
Worldwide Offices

A.3 Worldwide Offices
COMPANY HEADQUARTERS
Psion Teklogix Inc.

2100 Meadowvale Boulevard
Mississauga
Ontario
Canada L5N 7J9
Tel:
Fax:
Email:

+1 905 813 9900
+1 905 812 6300
salescdn@psion.com

CANADIAN SERVICE CENTRE
Psion Teklogix Inc.

7170 West Credit Ave., Unit #1
Mississauga, Ontario
Canada L5N 7J9
Tel:
+1 800 387 8898 Option 2 - or Direct: + 1 905 813 9900 Ext. 1999 Option 2
Fax:
+ 1 905 812 6304
Web: www.psionteklogix.com
NORTH AMERICAN HEADQUARTERS AND U.S. SERVICE CENTRE
Psion Teklogix Corp.

1810 Airport Exchange Boulevard
Suite 500
Erlanger, Kentucky
USA 41018
Tel:
Fax:
Email:

A-2

+1 859 371 6006
+1 859 371 6422
salesusa@psion.com

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Appendix A: Support Services And Worldwide Offices
Worldwide Offices
INTERNATIONAL SUBSIDIARIES (see also www.psionteklogix.com)
Psion Teklogix S.A.

La Duranne
135 Rue Rene Descartes
BP 421000
13591 Aix-En-Provence
Cedex 3; France
Tel:
Fax:
E-mail:

+33 4 42 90 88 09
+33 4 42 90 88 88
tekeuro@psion.com

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

A-3

APPENDIX

PORT PINOUTS
B.1 Tether Port Pinout

The tether port connector incorporates multiplexed undecoded scanner, decoded
scanner, RS232 serial, and USB interfaces. In order for it to operate, a special wiring
scheme is needed. If you need to create cables for the tether port, contact Psion
Teklogix and request an instruction sheet for tether port termination.
Important: Do not attempt to interface with the tether connector without
direction from a qualified Psion Teklogix technician. Doing
so may cause damage to the 8525 G2/8530 G2 and/or the
tethered device.

B.2 RS232 Port Pinout
Pin
No.

Description

DCD (Data Carrier Detect)

RXD (Receive Data)

TXD (Transmit Data)

DTR (Data Terminal Ready)

GND (Signal Ground)

DSR (Data Set Ready)

RTS (Ready To Send)

CTS (Clear to Send)

5V POWER *

* CAUTION: If enabled (software configurable), 5V or 12V power will appear on this line,
which may be the Ring Indicator line on some devices such as modems.
1/2 Amp Max.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

B-1

Appendix B: Port Pinouts
DB-26 Auxiliary Port Pinout

B.3 DB-26 Auxiliary Port Pinout
Pin
Number

B-2

Signal Name

Signal Type

Notes

EXT_5V_SW

Power

5 VDC @ 0.5 A maximum.

EXT_5V_SW

Power

5 VDC (Tied to pin 1).

N/C

Not used.

N/C

Not used.

N/C

Not used.

N/C

GND

Power

P1_USB_HOST+

5V diff

P1_USB_HOST-

5V diff

GND

Power

USB_DEVICE+

5V diff

USB_DEVICE-

5V diff

GND

Power

P2_USB_HOST+

5V diff

P2_USB_HOST-

5V diff

GND

Power

CONSOLE_RXD

RS232D

Console / diagnostic port.

CONSOLE_TXD

RS232D

Console / diagnostic port.

GND

Power

Not used.
12 Mbps serial data interface; connects as a USB host to a USB
client device.
12 Mbps serial data interface; connects as a USB client to a USB
host device.
12 Mbps serial data interface; connects as a USB host to a USB
client device.

CONSOLE_TXD_SEL

3V3

Grounding this pin selects the
PCON as the console data source;
disconnecting it selects the main
processor.

MOTION DETECT

3V3

Grounding this pin indicates that
the terminal is in motion.

AUXILARY_PORT_ID

Analog

Connect this pin to ground through
an external resistor to identify the
connected device.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Appendix B: Port Pinouts
External Keyboard–High Density DB-26 (8530 G2 Only)

Pin
Number
23

Signal Name

Signal Type

Notes

N/C

Not used.

PCON PROGRAM

Grounding this pin, together with
removing & re-asserting power to
the terminal puts the PCON in programming mode.

N/C

5V POWER

3V3

Not Used.
Power

B.4 External Keyboard–High Density DB-26 (8530 G2 Only)
Signal
#

Function

Signal

Type

32 Khz Clock +

5V diff

32 Khz Clock -

5V diff

Keyboard Interrupt +

5V diff

Keyboard Interrupt -

5V diff

Ground

Power

I2C Serial Clock

Ground

I2C Serial Data

Power

5V Switched

Power

3V3 Standby

Power

3V3 Switched

Power

EL Command

Ground

Power

Ground

Power

Ground

Power

Ground

Power

Notes

I2C serial data interface
Power
I2C serial data interface

Serial data to EL
backlight controller

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

B-3

Appendix B: Port Pinouts
External Keyboard–High Density DB-26 (8530 G2 Only)

Signal
#

B-4

Function

Signal

Type

Notes

No connect

Not used

System Power

15V

Heater Power

System Power

15V

Heater Power

No connect

Ground

Power

Ground

Power

No Connect

Keyboard Detect IN

3V3

Loop-back signal to
detect keyboard
installed

Keyboard Detect Out

3V3

Loop-back signal to
detect keyboard
installed

Not used

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

APPENDIX

USB SETUP APPLICATION
C.1 USB Setup
The USB Setup application is used to update a Windows PC so that it can connect to
a Psion Teklogix 8525 G2/8530 G2. To download the USB Setup application, go to:
www.psionteklogix.com/downloads
This will take you to the Teknet home page.
• Login with your Teknet Username and Password. (If you’re not already a
member of Teknet, you can register for free at this home page so that you
can access the USB Setup application.)
Once you’ve entered your name and password, the Download page is displayed.
• Scroll down to the Utilities heading, and then under USB Setup, tap on
Download. If you need further assistance, please contact Psion Teklogix
support (1-800-387-8898).

System Requirements
• Windows 2000 or XP
• ActiveSync 3.5 or later
The install program:
• updates copies of the device installation scripts usbstor.inf and
wceusbsh.inf with Psion Teklogix-specific information, and
• sets up a USB connection between the PC and the 8525 G2/8530 G2.

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

C-1

Appendix C: USB Setup Application
Launching The Application

C.1.1 Launching The Application
Before running the USB Setup application:
1. Unplug the 8525 G2/8530 G2 from your PC, and exit all running
applications.
2. Double-click on the USB Setup executable in the directory you copied
it to.

Welcome Dialog Box

If you check the “Install as a generic device” checkbox, the Hardware
Manager on your PC will not prompt you to install every new device you
connect to your PC. A generic configuration will be used for the Psion Teklogix devices.
3. Tap on the Install button to configure your PC or the Cancel button to
exit the USB Setup program.
The program checks that ActiveSync is installed and that it is a supported
version – 3.5 or later. If the version installed on your PC is not supported,
you’ll need to exit the USB Setup application, and install a later version of
ActiveSync. ActiveSync can be downloaded from Microsoft at:
http://www.microsoft.com/downloads.

C-2

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Appendix C: USB Setup Application
Installation Complete Dialog Box
In some cases, you may see an additional dialog:

Usually, this dialog is shown when more than one version of ActiveSync is
installed. You can either select the correct inf file for the USB Setup
program to work with, or you can cancel the installation, and uninstall the
extra copies of ActiveSync.

C.1.2 Installation Complete Dialog Box

This dialog box indicates the success or failure of the installation.
4. Tap on Exit to exit the application.
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

C-3

Appendix C: USB Setup Application
Installation Complete Dialog Box
If you need to view the log file, tap on View Log.
Once the USB Setup program is exited, you can connect the vehicle-mount
to your PC using a USB cable, and turn the unit on. If the USB Setup
process was successful, the “Found new hardware” wizard may start. If this
occurs, choose the recommended defaults. ActiveSync will detect your
8525 G2/ 8530 G2.

C-4

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

INDEX
A

accessories
bar code readers, connecting 167
Active Conn Tab 123
ActiveSync
ASync profile 120
Addendum 144, 146, 147
Ad Hoc network 18
Advanced (wireless connection) 23
Advanced button (Radio tab) 118
AIAG
AIAG Strip 140
AIAG Strip 140
aiming dot, duration of 139
ALT Key 43
ANSI
transmitting data 142, 145
appearance (display colour scheme) 86
appending to bar codes
characters 142, 145
approvals
8525 G2 183
8530 G2 183
arrow keys
moving the cursor 43
ASCII
Full Ascii 140
audio indicators
description of beep conditions 51
Authentication, Bluetooth Controls 121
authentication, network 19
Auto Radio Address (Cellular Radio) 113
Auto Radio Address (Cellular Radio
Address) 113

backlight
display 86
keyboard 45
backup profile, creating (Total Recall) 130
backup profile, restoring (Total Recall)
133

Bad Scan Beep 152
bar code
appending to 142, 145
connecting bar code reader 167
decodes required 139
decoding edge-to-edge 140
parameters 137–153
prefix character 141, 144
Security 140
stripping characters 142, 145
suffix character 142, 145
symbologies
Codabar 147
Code 11 148
Code 128 142
Code 39 140
Code 93 148
Discrete 2 of 5 150
EAN 13 143
EAN 8 145
IATA 2 of 5 150
Interleaved 2 of 5 149
MSI Plessey 149
UPC A 146
UPC E 146
bar code reader
external (specs) 186
external scanner, operation of 167
batteries
backup battery in use indicator 50
charging 50
installing 41
power card slots, enabling 99
power suspend 98
removing 41
specifications 186
very low icon 50
Baud 154, 156
Baud Rate/Modulation 116
beeper
description of beep conditions 51
BKSP 43

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Index
BKSP Key 43
BLUE Key 42
Bluetooth, enabling 99
Bluetooth radio
changing device name 124
device service profiles 120
ISM band 118
PINs for devices 121
radio configuration 118–124
Bluetooth setup 118
GPRS setup 125
peripherals 167
Bootloader (Shutdown menu) 72
Bright For (backlight) 87
BSP, Bluetooth Controls 124

cable diagrams B-1
cables
installing in vehicle 178
calibrating (touchscreen) 45, 101
card slot power 99
card slots (Devices), enabling power to 99
Cellular Radio Address 113
CH, Bluetooth Controls 120
changing password (Start Menu security)
67
Channel Enable List 110
Channel List, editing 112
Channel Number 109
Channel Selection 111
Channel Switch Speed 110
Channel Tab (Narrow Band radio) 109
characters
appending to bar codes 142, 145
prefix 141, 144
stripping 142, 145
suffix 142, 145
Check Digit 148
check digit 144, 147, 148, 149, 150
Check Digit, One 149
Click Data 151
Click Time 151
Codabar 147
Code 11 148
Code 128 142
Code 39 140
Code 93 148
cold reset 36
Cold Reset (Shutdown menu) 73
II

COM, Bluetooth Controls 124
Command Prompt 68
Communities 159
connection list table, Bluetooth Controls
123
Contact 158
Contacts 158
control panel
accessing 79
basic setup 85
Display Properties 85
icons 80
keyboard properties 87
power management properties 97
stylus properties 100
Convert to UPC-A 147
country code 143
CTRL Key 43
cycle tasks 70

data
entering
with a bar code reader 167
Data Bits 154, 156
Data Squelch 117
DC external power icon 50
decoded (external) parameters 154, 155
decoded scanners 138
decoding bar codes
decodes required 139
Security 140
Default All Parameters 109
DEL Key 43
desktop connection, remote 79
Device Name, changing 124
dialogue box, using 73
digit
check digit 144, 147, 148, 149, 150
number system 146, 147
Dim For (backlight) 87
Discrete 2 of 5 150
display
appearance (colour scheme) 86
background (control panel) 85
backlight 86
Display Properties 85
Display (scanning) 152
Display Properties 85
Dot Time 139

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Index
Double Click 151
Double-Click, Manage Triggers menu
103
Double-Tap (stylus settings) 100
DSSS, 802.11g radio 184
DUN service, Bluetooth 120

EAN/UCC 128 143
EAN 13 143
EAN 8 145
EAP (Extensible Authentication Protocol)
21
Enable Cellular Protocol 113
Enable Power Saving 115
Enable SNMP 159
encryption
TKIP (Temporal Key Integrity
Protocol) 19
WEP (Wired-Equivalent Privacy) 19
Encryption, Bluetooth Controls 121
END 43
END Key 43
Error Accept 140
ESC Key 43
Extensible Authentication Protocol (EAP)
21

features, of 8525/30G2 4
fields
Field Size 141
size 141
Frequency Table (Radio tab) 117
Full Ascii 140
Function Keys 44

Good Scan Beep 152
GPRS (bluetooth) 125

helpdesk iv
HOME 43, 44
HOME Key 43, 44

IATA 2 of 5 150
Idle Poll Limit 116

IEEE 802.11 radio, configuring 15
Include Check 144, 145, 147, 149, 150
Include Check (Discrete 2 of 5
symbology) 150
Include Check (Interleaved 2 of 5
symbology) 149
Include Chk 140, 146, 148
Include Country 143
Include Number Sys 146, 147
Include Sym (Code 128) 142
indicators
backup battery in use 50
battery charging icon 50
battery very low icon 50
LED functions 47
modifier keys 49
onscreen 48
power, DC 50
radio signal quality 49
scanner message 53, 54
security level 50
task bar 64
tethered device 51
tooltips 64, 69
Info Tab (Narrow Band radio) 106
Infrastructure network 18
Input 153
input
bar code reader 167
Input Panel 134
Input Panel (control panel) 81
INS Key 43
installation
8570 cables to devices 178
Intensity (7035 backlighting) 87, 89
Interleaved 2 of 5 149
Internet Explorer 68
IP address, assigning 21
ISM band, Bluetooth radio 118
ITF Check (Discrete 2 of 5 symbology)
150
ITF Check (IATA 2 of 5 symbology) 150
ITF Check (I 2 of 5 symbology) 149
I 2 of 5
Short Code 139

keyboard
key repeat 87, 89
one shot mode 89
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

III

Index
keyboard backlight 45
keyboard keys 41
ALT 43
arrow keys 43
BKSP 43
BLUE key 42
CTRL 43
DEL 43
END 43
ESC 43
Function keys 44
HOME 43, 44
INS 43
macro keys 44, 91
modifiers 41
navigating using the keyboard 61
one shot mode 89
ORANGE key 42
SHIFT 42
SPACE 43
TAB 43
Keyboard Properties 87, 89
backlight 89
one shot mode 89
Key Index, assigning 20
Key Repeat tab 88

LANAccessUsingPPP service, Bluetooth
120
Late TX Limit (Polling) 115
LED
charge 47
functions 47
receive 48
scan 48
transmit 48
Location 158
Low Level screen (Narrow Nand radio)
108

Macro keys
accessing 44
executing a macro 92
Macros menu, accessing 91
recording and saving 91
maintenance 56
Manage Triggers 102
Manual Radio Address (Cellular Radio
Address) 113
IV

Manual Switch Table 111
Marvell-88W8300_802.11g_PC_Card
(Model #RA2040) 5, 15
Marvell-88W8300_802.11g_PC_Card
(Model #RA2040)radio
Marvell-88W8300_802.11g_PC_Card
(Model #RA2040), configuring 15
modifier keys 41
locking 42
One Shot Mode 89
unlocking 42
Modulation/Baud Rate 116
Mod 10 Check 141, 150
Mod 10 Check (Discrete 2 of 5
symbology) 150
Mod 10 Check (I 2 of 5 symbology) 149
Mod 43 Check 141
MSI Plessey 149

Name 159
name servers, assigning 22
Narrow Band radio 106
Channel tab 109
Info tab 106
Low Level screen 108
Power tab 115
Protocol tab 113
Radio tab 116
statistics screen 107
network
Ad Hoc 18
connection, monitoring 55
infrastructure 18
network authentication 19
Network Key, assigning 20
non-decoded scanners 138
number system digit 146, 147

OFDM, 802.11g radio 184
offices list iv
One Check Digit 149
one dimensional internal scanner 53
One Shot Mode 89
ON For 89
Open (network authentication) 19
Options (scanning) 151
ORANGE Key 42
Outgoing, Bluetooth Controls 122

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Index
Output 153

Parity 155, 157
PDF scanner, operating 54
PIN, Bluetooth Controls 120
pinouts B-1
PINs, Bluetooth devices 121
pocket PC compatibility 79
Polling 114
polling values, testing 115
Poll Timeout (Polling) 114
port pinouts B-1
Port Prefix, Bluetooth Controls 124
Power (Serial Port) 156
power icon, external DC 50
Power Management Properties 97
devices (card slots) 99
suspend, power saving 98
Power Off Time 116
Power Tab (Narrow Band radio) 115
Power Up Channel 110
power up 8525 G2 14
power up 8530 G2 14
preferred networks 23
Prefix Char 141, 144
Printer (serial service), Bluetooth 120
profile, creating backup 130
profile, restoring backup 133
Programs
Command Prompt 68
Internet Explorer 68
Remote Desktop Connection 68
Windows Explorer 68
Protocol Tab (Narrow Band radio) 113
punctuation marks, accessing (SHIFT
Key) 42

radio
adding new network connection 18
advanced settings of 23
Bluetooth 118–124
configuring
adding a new network connection
18
Ad Hoc 18
authentication, network 19
Connect button 17

EAP (Extensible Authentication
Protocol) 21
Infrastructure 18
Key Index 20
Key Index, assigning 20
network authentication 19
Network Key 20
Network Key, assigning 20
wireless information 17
wireless properties 18
802.1X authentication 20
Connect button 17
IP address, assigning 21
name servers 22
Narrow Band 106
preferred networks, arranging 23
RA2040 (Marvell), configuring 15
RA2041 (Summit), configuring 24
SCU 24
signal quality 49
Summit DC-802.11_SC_CF (Model
#RA2041) 24
wireless connection, setting up 15
802.11, configuring 15
802.11g Direct Sequence SS 184
radio specifications 184
Radio Tab (Narrow Band radio) 116
RA2040 (Marvell) radio 15
RA2041 (Summit radio) 24
recalibrating (touchscreen) 45, 101
receive LED 48
Remote Desktop Connection 68
remote desktop connection 79
Repeat Delay (between key repeats) 88
Repeat Rate (of key repeats) 88
Repeat tab (key repeat settings) 88
resetting the vehicle-mount 36
cold reset 36
warm reset 36
Rights 159
Run (Start Menu) 72

safeguards 168
safety instructions
general VII
Scan Indicator 152
Scan Log File 152
scanning
aiming (target) dot duration 139

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Index
appending characters 142, 145
Bad Scan Beep 152
check digit 144, 147, 148, 149, 150
Click Data 151
Click Time 151
country code 143
decoded 138
decoded (external)
Serial Port 155
Display 152
Dot Time 139
Double Click 151
Good Scan Beep 152
Input (translate) 153
LED Indicators 52
non-decoded 138
number system digit 146, 147
Options Tab 151
Output (translate) 153
PDF scanner, operating 54
Ports
Tether Port 154
prefix character 141, 144
removing characters 142, 145
Scan Indicator 152
Scan Log File 152
Scan Result 152
Scan Result Time 152
Security 140
Short Code 139
Soft Scan Timeout 152
suffix character 142, 145
target (aiming) dot duration 139
techniques 51, 52
troubleshooting 53
Type (translate) 153
Verify 139
1D Laser, operating 53
Scan Result 152
Scan Result Time (sec) 152
screen
stylus, using to navigate 61
touch pen, using 61
Windows CE, navigating 61
SCU (Summit Client Utility) 24
Config Tab 28
configuring 24
Diags (Diagnostics) Tab 35
EAP Credentials 32
EAP Types 30, 31
Global Settings Tab 33
IP, assigning 24
VI

Main Tab 24, 27
security 30
Status Tab 35
ThirdPartyConfig 32
Windows Zero Config (WZC) 32
WLAN, connecting to 24
Security 140
security level icon 50
Security Settings 66
changing password 67
configuring taskbar 67
level 66
Supervisor 66
Teklogix 66
User 66
Serial Port settings 155
Baud 156
Data Bits 156
Parity 157
Power 156
Stop Bits 157
Servers, Bluetooth Controls 122
service information iv
Services, Bluetooth Controls 120
Set PIN, Bluetooth Controls 121
Settings
Control Panel 71
Network and Dial-up connections 71
Run 71
Taskbar and Start Menu 71
Shared Mode (network authentication) 19
SHIFT Key 42
Short Code 139
Shutdown
Bootloader 72
Cold Reset 73
Suspend 72
Warm Reset 73
Shutdown (Start Menu) 72
signal quality,radio 49
Simple Network Management (SNMP)
See SNMP 157
SIP 134
SIP (Soft Input Panel 81
size
of fields 141
Size/Chars (bar code scanning) 141
slot power status, built-in device, enabling
99
SNMP (Simple Network Management
Protocol) 157

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Index
Communities 159
Contact 158
Contacts 158
Enable SNMP 159
Location 158
Name 159
Rights 159
Soft Input Panel (SIP) 81
soft keyboard 134
Soft Scan Timeout 152
SPACE Key 43
specifications
battery 186
8525 G2 183
8530 G2 183
Standard (Code 128) 143
Start Menu 65
cycle tasks 70
desktop 66
programs 68
Run 72
Security 66
Settings 71
Shutdown 72
system tray 69
task manager 70
Statistics button (Radio tab) 118
Statistics screen (Narrow Band radio) 107
Stop Bits 155, 157
Strip Leading 142, 145
Strip Start/Stop Chars 147
Strip Trailing 142, 145
stylus (touch pen), using 61
Stylus Properties 100
Double-tap (stylus sensitivity) 100
Suffix Char 142, 145
Summit Client Utility (SCU) 24
Summit DC-802.11_SC_CF (Model
#RA2041) 5, 24
Supervisor security level 66
support services iv
Suspend (Shutdown menu) 72
suspending power 98
Suspend Timeout 98
symbologies
IATA 2 of 5 150
Sync Delay (Polling) 114
system tray 69

TAB Key 43
target dot, duration of 139
taskbar
onscreen indicators
backup battery in use 50
battery charging 50
battery very low icon 50
modifier keys 49
power, external DC 50
radio signal quality 49
security level 50
tethered device 51
tooltips 64, 69
using 64
task manager 70
Teklogix security level 66
Test Polling Values 115
Test Squelch (Radio tab) 117
tethered device
connecting and disconnecting 54
taskbar icons 51
Tether Port settings 154
Baud 154
Data Bits 154
Parity 155
Stop Bits 155
TKIP (Temporal Key Integrity Protocol)
encryption 19
tooltips (taskbar) 64, 69
Total Recall 129
backup profile, creating 130
backup profile, restoring 133
touch pen, using 61
touchscreen
recalibration 45, 101
stylus, using 61
touch pen, using 61
touchscreen, disabling 101
transmit LED 48
trigger mappings 102
triggers, configuring 102
Trigger Type, Manage Triggers menu 104
turning 8525 G2 on and off 14
turning 8530 G2 on and off 14
Type (translate) 153

UCC 128(Code 128) 143
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

VII

Index
UPC A 146
UPC E 146
USB Setup Application C-1
launching C-2
User security level 66

Variations (Code 128) 143
vehicle installation
cables 178
Verify 139

warm reset 36
Warm Reset (Shutdown menu) 73
warranty iv
WEP (Wired-Equivalent Privacy)
encryption 19
Wi-Fi Protected Access Pre-Shared Key
(network authentication) 19
Wi-Fi Protected Access-WPA (network
authentication) 19
Window Delay (Polling) 114
Windows® Start Menu See Start Menu 65
Windows CE
dialogue box 73
files, folders, & programs, working
with 62
Windows CE, navigating in 61
Windows Explorer 68
Windows Zero Config (WZC) 32
wireless connection setup 15
Wireless Information Tab 17
Wireless Properties tab 18
worldwide offices iv
WPA (network authentication) 19
WPA-PSK (network authentication) 19
WZC (Windows Zero Config) 32
1D internal scanner 53
802.1X authentication, enabling 20
802.11b radio, configuring 15
8525 G2
approvals 183
specifications 183
8530 G2
approvals 183
specifications 183
VIII

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : FrameMaker 7.2
Modify Date                     : 2007:02:19 15:55:17-05:00
Create Date                     : 2007:01:22 16:24:13Z
Metadata Date                   : 2007:02:19 15:55:17-05:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:6d04f4e0-9b5e-4e4c-83e5-988241f80b2a
Instance ID                     : uuid:7fccdbc8-8113-4aba-959d-e1588060c504
Page Count                      : 230
Creator                         : FrameMaker 7.2

EXIF Metadata provided by EXIF.tools

Psion Teklogix Vehicle Mount Computer 8525 G2 Users Manual

8525 G2 to the manual 1261812c-4b81-1d74-a563-6dab49d3c7ec

Navigation menu

Versions of this User Manual:

Views

Navigation