131683 1 Bjm Sk Series Brochure User Manual
136208 1 Bjm Skx Series Brochure 136208_1_BJM SKX Series Brochure
User Manual: Pump 131683 1 Bjm Sk Series Brochure
Open the PDF directly: View PDF 
.
Page Count: 4
The BJM Shredder Pump is more
than a chopper or cutter pump that
cuts solids between the edge of an
impeller and a cutter bar like an ax.
BJM's Tungsten carbide tip Fang™
impeller CONTINUOUSLY rips solids
apart with 360 degree shredding
action for easier passage.
This makes the BJM Shredder Pump
capable of shredding and passing
almost any solid.
3
3
3
3
Plastics
beverage containers
children’s toys
tampon applicators
eating utensils
condoms
Metals
beer cans
soda cans
bottle caps
wire
Food Wastes
fish, meats, poultry
whole fruits
vegetables
Fibrous Solids
diapers
sanitary pads
gloves
underwear
towels
Shredder pumps can handle most unintended items that occasionally enter the
waste stream.
(For optimal performance, the pump must be sized correctly for the application)
BJM Shredder Pumps are designed and built to “SHRED”,
destroying solids by tearing, breaking and ripping them to
pieces.
CHOICE of CONSTRUCTION
The unique construction and solids handling of the BJM Shredder pump makes
it the choice for wastewater and industrial applications.
• Aquariums
• Aquatic Parks
• Research centers
• Hospitals
• Food packaging
• Meat processors
• Spill containment
• Wash down
• Schools
• Sports centers
• Shopping malls
• Airports
• Bus stations
• Trailer parks
• Amusement parks
• Dairies
• Feed lots
• Bottling plants
• Camp grounds
• Industrial Parks
SK SHREDDER PUMPS: CAST IRON and 304 Stainless Steel for NON-CORROSIVE APPLICATIONS.
SKX SHREDDER PUMPS: ALL 316 Stainless Steel and FKM for corrosive liquids or applications where
cast iron oxidation contaminates the pumped liquid.
High Temperature Shredder and Explosion Proof (Class 1, Div. 1 Group C & D) pumps also available.
See BJM's Fahrenheit™ and XP-SK Series.
Features & Benets
33 FT POWER AND SEAL MINDER CABLE
(UL/CSA/MSHA approved - Custom lengths available)
CABLE ENTRY SEALING SYSTEM
(FKM compression tting with SS gland nut to hold and seal cable.
Individually isolated and potted power leads to prevent wicking)
HEAVY DUTY LIFTING RINGS
(Or handle on smaller models)
MOTOR OVERLOAD DEVICE
(Protects motor from thermal and amperage overloads)
SUPERIOR MOTOR INSULATION AND SS MOTOR
HOUSING
(Class F insulation on 1HP- 5HP and Class H on 7.5 HP - 20 HP.
SS motor housing for superior corrosion resistance and longer life)
Seal Minder® MOISTURE DETECTION SYSTEM
(Provides early warning to protect motor)
ANSI FLANGE OR NPT DISCHARGE
(Flange adapts easily to slide rail installations and NPT discharge with
elbow for hose connection)
DOUBLE MECHANICAL SEALS
(Oil lubricated double seal design with (SiC X 2) lower and carbon/ceramic
upper seal faces)
WEAR-RESISTANT SHREDDING SYSTEM – TUNGSTEN
CARBIDE FITTED NON-CLOG FANG™ IMPELLER AND
HI-CHROME 360˚ TOOTHED SUCTION PLATE
(Provides long life in tough services)
INTEGRAL PUMP STAND
(Positions suction inlet off the bottom. Can be removed (cast iron version) to
accept slide rail installation)
Distributor:
123 Spencer Plain Road
P.O. Box 1138
Old Saybrook, CT 06475
Tel: (860)-399-5937
Toll Free: (877)-BJM-PUMP
Fax: (860)-399-7784
Web: www.bjmpumps.com
SPECIFICATION SUBJECT TO CHANGE WITH OUT NOTICE WARNING: NOT FOR USE IN ANY FLAMMABLE LIQUIDS
Cat.Id. SK/SKX13
Fang is a trademark of BJM Pumps, LLC. Seal Minder is a registered trademark of BJM Pumps, LLC. ©2004-2013 BJM Pumps, LLC. All rights reserved.
*Note: Some pumps will need an adapter to fit rails larger than their rated discharge size. Slide rail adapters for other
manufacturers available.
MODEL DISCH.
SIZE H.P. VOLT PHASE RPM RATED
AMPS
MAX
SOLIDS
MAX
HEAD
MAX
GPM HEIGHT WIDTH
PUMP-
WEIGHT
LBS
EST. SHIP
WEIGHT
LBS
SKX750C 2" 1 115/230 1 3450 14/7 2" 48' 95 21.25" 13.5" 66 75
SK1500C/SKX1500C 3" 2 230 1 3450 14 2.5" 46' 185 21.5" 14.75" 93 104
SK08C/SKX08C 2" 1 230/460 3 3450 3.2/1.6 2" 48' 95 21.25" 13.5" 60 69
SK15C/SKX15C 3" 2 230/460 3 3450 6/3 2.5" 46' 185 20.5" 14.75" 84 95
SK22C/SKX22C 3" 3 230/460 3 3450 9/4.5 2.5" 59' 240 21.8" 15.3" 113 125
SK37C/SKX37C 3" or 4" 5 230/460 3 3450 14/7 3" 69' 330 22.5" 15.3" 121 136
SK55C/SKX55C 4" 7.5 230/460 3 1750 21/10.5 3.5" 59' 570 30" 29.5" 321 398
SK75C/SKX75C 4" 10 460 3 1750 15 3.5" 73' 700 31.2" 29.5" 337 414
SK110C/SKX110C 6" 15 460 3 1750 19.8 3.5" 94' 845 35.6" 35.2" 515 610
SK150C/SKX150C 6" 20 460 3 1750 25.7 3.5" 101' 911 37.6" 35.2" 534 630
Note: When selecting a pump; shredding capability increases with higher motor torque. Size the pump to apply as much motor HP as possible.
For optimal performance, the pump must be sized correctly for the application
40
50
60
70
80
90
100
110
TOTAL DYNAMIC HEAD
SK/SKX SERIES
FEET
METERS
60 Hz
1
15
18
21
24
27
30
33
© 2004 - 2006 BJM Pumps, LLC. All rights reserved.
0
10
20
30
0 100 200 300 400 500 600 700 800 900 1000
FLOW RATE PER MINUTE
U.S. GALLONS
LITERS
0
3
6
9
0400 800 1200 1600 2000 2400 2800 3200 3600
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
2/17/2006 supersedes priors
SHREDDER PUMP SLIDE RAIL ASSEMBLIES
CAST IRON STAINLESS STEEL SIZE PUMP SIZES
SR50-1 SRX50SS-1 2" 08C
SR80-ANSI SRX80SS-ANSI 3" 1500C, 15C, 22C, 37C
SR100-ANSI SRX100SS-ANSI 4" *1500C, *15C, *22C, *37C, 55C, 75C
SR150-ANSI SRX150SS-ANSI 6" *55C, *75C, 110C, 150C
