139059 1 Hydromatic Osp50 Brochure 61604 Hydro W 02 6220 User Manual

139038 1 Hydromatic Osp50 Brochure 139038_1_ Hydromatic OSP50 Brochure

139053 1 Hydromatic Osp50 Brochure 139053_1_ Hydromatic OSP50 Brochure

139060 1 Hydromatic Osp50 Brochure 139060_1_ Hydromatic OSP50 Brochure

139055 1 Hydromatic Osp50 Brochure 139055_1_ Hydromatic OSP50 Brochure

139056 1 Hydromatic Osp50 Brochure 139056_1_ Hydromatic OSP50 Brochure

User Manual: Pump 139059 1 Hydromatic Osp50 Brochure

Open the PDF directly: View PDF PDF.
Page Count: 4

Page
1
Submersible Effluent Pump
• Continuous Duty Rated
• Septic Tank Effluent
• Flood Control Units
• Industrial Circulators
• Elevator Pits
• Basement Sumps
OSP50
The Hydromatic OSP50 submersible pump is specifically designed to meet the demands
of residential sump, elevator pit, septic tank effluent, industrial circulator and transfer
tank applications.
The 1-1/2 inch NPT discharge pump is available with a powerful 1/2 horsepower motor, in both
automatic and manual configurations, and can handle capacities up to 60 gallons per minute and
heads to 25 feet.
The OSP50 features a heavy-duty cast iron construction that provides durability in rugged
applications, as well as assisting in dissipating heat from the motor, for cooler operation. The
pump’s nonclogging bronze impeller, which is threaded to a stainless steel shaft, provides long life
even in demanding applications, and is capable of handling up to 5/8 inch spherical solids and lint.
The OSP50’s oil-filled motor provides superior cooling characteristics, allowing the motor to run
cool and quiet for years. This oil-filled design also provides permanent lubrication of the shaft
bearings, minimizing maintenance and extending the service life of the pump. In addition, to protect
against overheating, the motor windings contain an automatic reset thermal overload.
Automatic models feature the exclusive Hydromatic diaphragm pressure switch, which provides
proven reliability in installations where a float might hang up. It also incorporates a unique
“piggyback” plug arrangement, which allows for simple
conversion to manual operation by simply removing the
switch plug and inserting the motor plug directly into the
electrical outlet. This feature provides an easy way
of periodically cycling the pump to ensure it is
operating properly.
The Hydromatic wide-angle float switch features a
unique piggyback plug arrangement. The pump
power cord plugs into the back of the switch plug, to
provide automatic operation. To operate the pump
manually, simply plug the pump power cord directly
into the electrical outlet, bypassing the switch plug.
The piggyback plug provides ease of service and
allows the pump to be cycled manually on a
periodic basis to ensure proper operation.
OSP50 - Submersible Effluent Pump
FEATURES
Page
2
Page
3
OSP50 - Submersible Effluent Pump
A. Water-resistant power cord with molded plug is
available in 10 or 20 foot lengths, and is easily
field serviceable.
B. Upper and lower ball bearings support motor
shaft, minimizing the effects of impeller thrust
loads. This design results in minimum friction and
perfect alignment of rotor, for longer service
from pump.
C. Oil-filled motor provides superior cooling and
permanent lubrication of bearings, minimizing
maintenance and extending service life.
D. Powerful 1/2 HP motor runs cool and quiet for
long life. Motor windings contain automatic-reset,
thermal overload protection.
E. Mechanical shaft seal is carbon- and ceramic-faced
for long, leakproof life.
F. Heavy-duty, cast iron construction provides long
life in rugged applications.
G. Discharge is 1-1/2 inch NPT.
H. The nonclogging bronze impeller, which is thread-
ed to a stainless steel shaft, provides long life in
corrosive applications, and is capable of
handling up to 5/8 inch spherical solids and lint.
I. Bottom-suction design alleviates buildup of
debris, providing optimum pump performance and
reduced maintenance.
J. Multiple strainer inlets prevent foreign objects
from clogging pump, providing optimum operation
and reduced maintenance.
A
B
C
D
E
F
G
H
I
BENEFITS
The OSP50 is a completely submersible pump
for use in basement sump, elevator pit, septic
tank effluent, industrial circulator, and transfer
tank applications.
Automatic models feature the exclusive
Hydromatic diaphragm pressure switch with
“piggyback” plug-in arrangement, which provides
proven reliability in installations where a float
might hang up. Switch is easily serviced and may
be easily disconnected to operate pump manually.
J
B
OSP50 - Submersible Effluent Pump
DETAILS
Performance Data
(95.25)
(107.95)
(127)
(38.1)
(98.42)
(130.18)
(171.45)
(298.45)
(307.98)
(234.95)
PUMP 
ON
(76.2)
(69.85)
DISCHARGE
Dimensional Data
All dimensions in inches. Metric for international use. Component dimensions may vary ± 1/8 inch.
Dimensional data not for construction purpose unless certified. Dimensions and weights are approximate.
On/Off level adjustable. We reserve the right to make revisions to our product and their specifications
without notice.
Pump Characteristics
Materials of Construction
Pump/Motor Unit Submersible
Manual Models OSP50MI OSP50M2
Automatic Models OSP50AI OSP50A2
Horsepower 1/2
Full Load Amps 9.5 5.5
Motor Type Split Phase
R.P.M. 1750
Phase Ø 1
Voltage 115 230
Hertz 60
Operation Continuous Duty Rated
Temperature 140°F Ambient
NEMA Design B
Insulation Class F
Discharge Size 1-1/2" NPT
Solids Handling 5/8"
Unit Weight 50 lbs.
Power Cord 18/3, SJTW, 18/3, SJTW
10' std. (20 opt.) 20' std.
Handle Steel
Lubricating Oil Dielectric Oil
Motor Housing Cast Iron
Pump Casing Cast Iron
Shaft Steel
Mechanical Seal Faces: Carbon/Ceramic
Shaft Seal Seal Body: Brass
Spring: Stainless Steel
Bellows: Buna-N
Impeller Composite Impeller (Bronze - Optional)
Upper Bearing Single Row Ball Bearing
Lower Bearing Single Row Ball Bearing
Base Cast Iron
Fasteners Stainless Steel
Item #: W-02-6220 12/05
© 2005 Hydromatic®Ashland, Ohio. All Rights Reserved.
– Your Authorized Local Distributor –
USA
740 East 9th Street Ashland, Ohio 44805
Tel: 419-289-3042 Fax: 419-281-4087 www.hydromatic.com
CANADA
269 Trillium Drive Kitchener, Ontario, Canada N2G 4W5
Tel: 519-896-2163 Fax: 519-896-6337

Navigation menu