1987 1 Zoeller 31 0091 Brochure Fm0487 Sump/Sewage Basin Catalog Sheet User Manual
5728 1 Zoeller Basin Brochure 5728_1_Zoeller Basin Brochure
User Manual: Pump 1987 1 Zoeller 31-0091 Brochure
Open the PDF directly: View PDF .
Page Count: 4
SUMP/SEWAGE BASINS
CONSULT FACTORY FOR LARGER SIZE BASINS OR SPECIAL APPLICATIONS.
Products may not be exactly as pictured
NOTE: Polyethylene basins should be used for indoor installations only.
SECTION: 3.10.030
FM0487
0307
Supersedes
0705
• Available in high density polyethylene structural foam, polyethylene or
fi ber glass.
• Ideal for residential, commercial and industrial applications.
• Complete with necessary sealing hardware and fl anges.
• Available with 2" or 3" vent and 2" or 3" discharge.
• Lid with gasket and 4" C. I. inlet hub with anticorrosion coating are included
with the sewage basins.
• Centerline of hub is located 10½" from top of basin (std.). Custom locations
available.
• Polyethylene sewage pump basins are IAPMO approved. For 10' stack test
models, refer to charts on pages 2 and 3.
• Sealed (Radon) basins for sump pumps in 18" x 22" and 18" x 30" sizes.
•
Polyethylene sump basin available with plastic non-sealed covers in
18" x 22".
• Sewage basins are watertight and gas-tight when properly in stalled.
• Durable steel cover with gasket standard on simplex and duplex sewage
basins.
• One-piece, seam-free construction on all basins.
• Duplex covers include two pump plates and in spec tion plate.
• Ready to install for economical and simple installation.
• Dimensional Engineering data available.
• Temperature rated 130°F.
• Fiberglass models available that will pass the 10' water stack test (Refer to
charts on pages 2 and 3). (L. A. - RR-5311)
• Various custom diameters & lengths available in fi ber glass, consult factory. Also
with 10' water stack test.
COMPARE THESE FEATURES
© Copyright 2007 Zoeller Co. All rights reserved.
One Piece, Polyethylene Molded
with 3" x 13" Open ing
18" SUMP BASIN COVERS ONLY
P/N 17-0131
One Piece, Steel with 3" Vent, 1½"
Dis charge, and Cord
Grommet (Ra don Lid)
P/N 17-0135 P/N 17-0294
18" Cover - One Piece,
Polyethylene with 1 ½" Dis-
charge and Cord Grommet.
SIMPLEX SEWAGE BASIN
Product information presented
here re fl ects con di tions at time
of publication. Consult factory
re gard ing dis crep an cies or
in con sis ten cies. MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961
(502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624
visit our web site:
www.zoeller.com
SUMP AND RADON BASINS SEWAGE BASINS
P/N 31-1606
18" x 30" Premium Basin with Split Cover, AFD, Torque Stops, Black.
18" x 22" Heavy Duty Polyethylene,no inlet hole and hub (P/N 31-0444).
18" x 22" Radon basin with inlet and hub (P/N 31-0251).
18" x 30" Poly, 4" inlet-grommet (loose), no inlet hole. Includes one-piece
blank poly cover w/cord seal (P/N 31-1855).
18" & 24" DIAMETER BASIN AND COVERS
POLYETHYLENE/POLYETHYLENE STRUCTURAL FOAM/FIBERGLASS
SIMPLEX BASINS & COVERS
2" Vent 3" Vent BASIN COVERS
Size 2" 2" 3" STYLE IAPMO STYLE IAPMO 4" Inlet
Discharge Discharge Discharge LISTED CAPABLE
18" X 30" 31-0081 N/A N/A Poly N Steel - Split N Cast Iron Hub
18" X 30" 31-0091 31-0084 31-0082 Poly Y Steel - Solid N Cast Iron Hub
18" X 30" 31-0154 31-0157 31-0155 Fiberglass N Steel - Split N Cast Iron Hub
18" X 30" 31-0159 31-0162 31-0161 Poly Y Steel - Solid - 10' Stack Y Pipe Seal
18" X 30" 31-0214 31-0217 31-0215 Fiberglass N Steel - Solid - 10' Stack Y Cast Iron Hub
18" X 30" 31-1649 31-1650 31-1651 Poly Structural Foam, AFD N PSF - Solid - 10' Stack Y Snap-In Hub
18" X 30" 31-1652 31-1653 31-1654 Poly Structural Foam N PSF - Solid - 10' Stack Y Combo Hub
18" X 30" 31-1655 31-1656 31-1657 Poly Structural Foam N PSF - Solid - 10' Stack Y Snap-In Hub
18" X 30" 31-0608 31-0611 31-0609 Poly (In te gral Side Vent) N Poly - Solid N Pipe Seal
18" X 30" 31-0615 N/A N/A Poly Y Steel - Solid N Pipe Seal
18" X 30" 31-1098 N/A N/A Poly Structural Foam N Poly - Solid N Combo Hub
18" X 30" 31-1099 31-1101 31-1100 Poly Structural Foam N Poly - Split N Combo Hub
18" X 30" 31-1338 31-1338 N/A Poly Structural Foam N Poly - Solid N Snap-In Hub
24" X 30" 31-0004 31-0027 31-0006 Fiberglass N Steel - Solid N Cast Iron Hub
24" X 30" 31-0039 31-0042 31-0040 Poly N Steel - Solid N Cast Iron Hub
24" X 30" 31-0218 31-0221 31-0219 Fiberglass N Steel - Solid -10' Stack Y Cast Iron Hub
24" X 36" 31-1102 31-1104 31-1103 Poly Structural Foam N Poly - Split N Combo Hub
© Copyright 2007 Zoeller Co. All rights reserved.
COMBO HUB
(Poly Structural Foam Only)
THREE BOLT HUB
FOR DWV PIPE
PIPE SEAL
HUB
DUPLEX BASIN AND COVER INCLUDES:
Discharge and Vent Flange
Cord Seals
4" Inlet Hub
Inspection Plate
Gaskets and hardware
SIMPLEX BASIN and COVER IN CLUDES:
Discharge and Vent Flange
Cord Seal
4" Inlet Hub - Cast Iron Shown
Gaskets and hardware
SIMPLEX SEWAGE BASINS DUPLEX SEWAGE BASINS
2
SNAP-IN HUB
(Poly Structural Foam Only)
18" x 30" Polyethylene Structural Foam, Polyethylene or Fiberglass
24" x 30" Polyethylene or Fiberglass
30" x 36" Polyethylene or Fiberglass
36" x 36" Polyethylene or Fiberglass
48" x 48" Fiberglass
Item No. Description
17-0135 18" Cover - One Piece, Polyethlene Molded with 3" x 13" Opening
17-0131 18" Cover - One Piece, Steel with 3" Vent, 1½" Discharge, and Cord Grommet (Radon Lid)
17-0294 18" Cover - One Piece, Polyethylene with 1 ½" Discharge and Cord Grommet.
SUMP BASIN COVERS
Item No. Description
31-0444 Polyethylene Basin without Hub & Hole - 18" x 22"
31-0251 Polyethylene Basin with Inlet Hole, without Hub - 18" x 22"
SUMP BASINS
© Copyright 2007 Zoeller Co. All rights reserved.
Hub Size All Basin Hole Size
(Pipe Seal Grommets) Sizes Required in Basin
1¼" 008813 2"
1¼" 009838 3"
1½" 005882 2-1/2"
1½" 009170 3"
2" 005588 3"
3" 005587 4"
4" 005196 5"
6" 009850 7"
NOTE: Basins are not designed to be installed where saturated
soil hydrostatic pressure extends above the top of the pit unless
the pressure is relieved by an independent drainage system.
Basin cover vent and discharge seals may be rubber insert or
bolted on fl ange design.
CONSULT FACTORY FOR LARGER SIZE BASINS
OR SPECIAL AP PLI CA TIONS
3
Size Steel Split Steel Solid Poly Solid Poly Split Fiberglass
18" 0.075 0.115 0.345 0.312 N/A
24" N/A 0.115 N/A 0.343 N/A
30" N/A 0.125 N/A N/A 0.250
36" N/A 0.125 N/A N/A 0.375
48" N/A 0.250 N/A N/A 0.500
THICKNESS OF COVERS
Available in:
Str. Fiber Gallon
Foam Poly Glass Size Capacity A B C D E
x x x 18” x 30” 30 30" 16½" 18" 22" 10½"
NA x x 24” x 30” 60 30" 24" 26" 30" 10½"
x NA NA 24” x 36” 72 36" 22½" 25½" 30" 10½"
NA x x 30” x 36” 108 36" 30” 32" 36" 10½"
NA x x 36” x 36” 159 36" 36" 38" 42" 10½"
NA NA x 48” x 48” 376 48" 48" 48½" 55½" 10½"
BASIN DIMENSIONS
Size Structural Foam Poly Fiberglass
18" x 30" 0.200 0.200 0.188
24" x 30" N/A 0.200 0.188
24" x 36" 0.250 N/A N/A
30" x 36" 0.312 0.230 0.188
36" x 36" N/A 0.230 0.188
48" x 48" N/A N/A 0.250
THICKNESS OF BASINS
Hub Size
Basin Size
(Flat Mount - Cast Iron) 18" 24" 30" 36" 42" 48"
4" 005198 (Fits all basins with a fl at on side)
Curved mount requires mounting on curved side of basin.
Hub Size Basin Size
(Curved Mount - Cast Iron) 18" 24" 30" 36" 42" 48"
2" 010749 010749 010749 010749 010749 010749
3" 010124 010124 010124 010124 010124 010124
4" NA 004997 004997 004997 004997 004997
5" NA 010125 010125 010125 010125 010125
6" NA 007818 007818 007818 007818 007818
8" NA 010057 010057 010057 010057 010057
Hub Size Basin Size (Poly structural foam only)
(Combo Hub) 18" 24" 30"
3" 013505 013505 013505
4" 012094 012094 012094
30", 36" & 48" DIAMETER BASIN AND COVERS - POLYETHYLENE/FIBERGLASS
DUPLEX BASINS & COVERS
2" Vent 3" Vent BASIN COVERS
Size 2" 2" 3" STYLE IAPMO STYLE IAPMO 4" Inlet
Discharge Discharge Discharge LISTED CAPABLE
30" X 36" 31-1105 31-1107 31-1106 Structural Foam N Solid - FG*- Duplex N Combo Hub
30" X 36" 31-0043 31-0046 31-0044 Poly N Steel - Solid - Duplex N Cast Iron Hub
30" X 36" 31-0071 31-0074 31-0072 Fiberglass N Steel - Solid - Duplex N Cast Iron Hub
30" X 36" 31-0222 31-0225 31-0223 Fiberglass N Steel - Solid - Duplex - 10' Stack Y Cast Iron Hub
36" X 36" 31-0047 31-0050 31-0048 Poly N Steel - Solid - Duplex N Cast Iron Hub
36" X 36" 31-0010 31-0057 31-0011 Fiberglass N Steel - Solid - Duplex - 10' Stack Y Cast Iron Hub
48" X 48" 31-0124 31-0127 31-0125 Fiberglass N Steel - Solid - Duplex - 10' Stack Y Cast Iron Hub
CAST IRON HUB (4")
OR
PIPE SEAL (4")
BASIN
OR
SNAP IN HUB (4")
E
A
D (DIA. I.D.)
C
B
SK1866D
© Copyright 2007 Zoeller Co. All rights reserved.
MAIL TO: P.O. BOX 16347
Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road
Louisville, KY 40211-1961
(502) 778-2731 • 1 (800) 928-PUMP
FAX (502) 774-3624
Manufacturers of . .
www.zoeller.com
OUTDOOR BASINS AND ACCESSORIES
SIMPLEX OUTDOOR BASINS - FIBERGLASS ONLY - NO HOLES DRILLED
Size Item No. Description
24" X 48" 31-0866 Solid Fiberglass Basin with Solid Fiberglass Cover and Anti-Flotation Ring
24" X 60" 31-0946 Solid Fiberglass Basin with Solid Fiberglass Cover and Anti-Flotation Ring
24" X 72" 31-0594 Solid Fiberglass Basin with Solid Fiberglass Cover and Anti-Flotation Ring
30" X 48" 31-1830 Solid Fiberglass Basin with Solid Fiberglass Cover and Anti-Flotation Ring
30" X 60" 31-1831 Solid Fiberglass Basin with Solid Fiberglass Cover and Anti-Flotation Ring
30" X 72" 31-1586 Solid Fiberglass Basin with Solid Fiberglass Cover and Anti-Flotation Ring
All basins include 5 fi eld installed adapta-fl ex seals - (1) 1¼", (1) 1½", (2) 2" and (1) 4" grommets.
Item No. Color Material Size Dimension (W x H) Pipe Area Screen Area
10-1753 Black Plastic 2" Male NPT 4.625" X 3.125" 3.1 sq. in. 6.9 sq. in.
10-1461 Green Metal 2" Male NPT 4.625" X 3.125" 3.1 sq. in. 6.9 sq. in.
10-1462 Green Metal 3" Male NPT 6.875" X 4.500" 7.1 sq. in. 19.6 sq. in.
10-1463 Green Metal 4" Male NPT 9.250" X 5.000" 12.6 sq. in. 35.8 sq. in.
10-1464 Green Metal 6" Male NPT 11.125" X 6.625" 28.3 sq. in. 42.5 sq. in.
DUPLEX OUTDOOR BASINS - FIBERGLASS ONLY - NO HOLES DRILLED
Size Item No. Description
36" X 48" 31-1450 Solid Fiberglass Basin with Solid Fiberglass Cover and Anti-Flotation Ring
36" X 60" 31-1451 Solid Fiberglass Basin with Solid Fiberglass Cover and Anti-Flotation Ring
36" X 72" 31-1452 Solid Fiberglass Basin with Solid Fiberglass Cover and Anti-Flotation Ring
All basins include 5 fi eld installed adapta-fl ex seals - (1) 1¼", (1) 1½", (2) 2" and (1) 4" grommets.
ADDITIONAL BASIN SIZES WITH OPTIONS (ie Rail Studs) ARE AVAILABLE. CONSULT FACTORY.
OUTDOOR TANK VENTS
Solid Fiberglass Cover
SK2278
Fiberglass Basin
with Anti-Flotation
Ring
DUPLEX COVER
ACCESS PLATE
INSPECTION PLATE
SIMPLEX COVER
SK1866B
"OUTDOOR" "INDOOR"