536585 1 Suntec Single Stage Oil Pump Specifications Word Pro Installation And Service Manual Section I.lwp User

536577 1 Suntec Two-Stage Oil Pump Specifications 536577_1_Suntec Two-Stage Oil Pump Specifications

536603 1 Suntec Single Stage Oil Pump Specifications 536603_1_Suntec Single Stage Oil Pump Specifications

536603 1 Suntec Two-Stage Oil Pump Specifications 536603_1_Suntec Two-Stage Oil Pump Specifications

536601 1 Suntec Two-Stage Oil Pump Specifications 536601_1_Suntec Two-Stage Oil Pump Specifications

536569 1 Suntec Two-Stage Oil Pump Specifications 536569_1_Suntec Two-Stage Oil Pump Specifications

User Manual: Pump 536585 1 Suntec Single Stage Oil Pump Specifications

Open the PDF directly: View PDF PDF.
Page Count: 12

Download536585 1 Suntec Single Stage Oil Pump Specifications Word Pro - Installation And Service Manual Section I.lwp User
Open PDF In BrowserView PDF
SUNTEC
PERFORMANCE-PROVEN FUEL UNITS
AND VALVES
...for residential and commercial applications
SUNTEC, THE INDUSTRY LEADERS z
BUILT ON OUR COMMITMENT
Knowing the industry’s need and responding to them with the right products and services is one of the
responsibilities of leadership. Over the years, Suntec has been committed to being involved, asking
questions, listening and providing answers. Today, as the industry leaders, our involvement is as
strong as ever. We still work hard to earn your trust in us as the experts in our field. You shouldn’t
have to settle for less.

MODEL A-7000 z SINGLE-STAGE FUEL UNITS
y Single-pipe installations to 6” hg. vacuum
y Two-pipe installations to 12” hg. vacuum
y Lift or gravity feed applications with 10 psi maximum
inlet/return pressure
y Choice of 1725, 2850, 3450 rpm
y Suitable for no. 2, no. 1 fuel oil, or kerosene
y Mounting in any position
y Factory-set at 100 psi
y Adjustable range 100-150 psi at 3450 rpm, 100-135 psi
at 1725 rpm. Models available to 200 and 300 psi.

I-1

SPECIFICATIONS* /ORDERING INFORMATION

Model
Number

RPM

Rotation1

Nozzle
Port
Location1

Strainer &
Nozzle Rating
at 100 psi

Special
Features
---3-bolt mtg. hub
--

A1VA-7112
A1VB-7113
A1VC-7114
A1VD-7741
A1YA-7912
A2VA-3006
A2VA-7142
A2VA-7116
A2VB-7117
A2VC-7118
A2VA-7416
A2YA-7743
A2YA-7916
A2YA-7430

1725
1725
1725
1725
1725

R.H.
R.H.
L.H.
L.H.
R.H.

R.H.
L.H.
L.H.
R.H.
R.H.

3 gph
3 gph
3 gph
3 gph
7 gph

2850
3450
3450
3450
3450
3450/2850
3450
3450

R.H.
R.H.
R.H.
L.H.
R.H.
R.H.
R.H.
R.H.

R.H.
R.H.
L.H.
L.H.
R.H.
R.H.
R.H.
R.H.

2.25 gph
3 gph
3 gph
3 gph
3 gph
7 gph
7 gph
3 gph

A2VD-7519

3450

L.H.

R.H.

3 gph

A2RA-7710
A2RA-7736
A2RA-7737
A1RA-7738
A2RA-7739

3450/100
3450/1725
3450/1725
1725
3450/1725

R.H.
R.H.
R.H.
R.H.
R.H.

R.H.
R.H.
R.H.
R.H.
R.H.

2.5/.4 gph
2.5/2.5**gph
2.5/2.5**gph
2.5
2.5/1.5 gph

----Solenoid dumping fuel unit
3 gph at 200 psi
Solenoid dumping fuel unit
Solenoid dumping fuel
unit .32mm hub
Waste oil application
Waste oil application
10-20 psi waste oil application
Waste oil application
30-50 psi waste oil

*Also apply to “-6” model numbers (shown on fuel unit).
For example: “7916-6,” etc. 1Viewed from shaft end.
**Use gage port for rated flow @ 1725 rpm, no cut off.
Note: All ports shown in diagram are reversed for left-hand nozzle fuel units.
I-2

Typical Model Number Nomenclature
(Model A & Model B):*

*The model number appears on the fuel unit label.

MODEL B-8000 • TWO-STAGE FUEL UNITS
y
y
y
y
y
y
y
y

Two-pipe installations up to 17” hg. vacuum
Lift or gravity feed applications with 10 psi
maximum inlet/return pressure
Capacities to 7 gph, except boost pumps
Factory-set at 100 psi
Pressure adjustable from 100 to 150 psi at 3450
rpm, 100 to 135 psi at 1725 rpm. Models
available to 200 and 300 psi
Choice of 1725, 2850, 3450 rpm
Suitable for no.2, no.1 fuel oil, or kerosene
Mounting in any position except upside down.

I-3

SPECIFICATION*/ORDERING INFORMATION

Model
Number

RPM

Rotation1

Nozzle
Port
Location1

B1VA-8212
B2VA-8216
B2YA-8916
B2VA-8416

1725
3450
3450
3450

R.H.
R.H.
R.H.
R.H.

R.H.
R.H.
R.H.
R.H.

Strainer
& Nozzle
Rating at
100 psi
3 gph
3 gph
7 gph
3 gph

B2VA-8241

3450

R.H.

R.H.

--

B2VA-8242

2850

R.H.

R.H.

2.25 gph

Special
Features
--3 gph at 200 psi
Solenoid
dumping fuel unit
Boost pump, 20
gph at 10-20 psi
--

*Also apply to “-8” model numbers (shown on fuel unit). For example: “8212-6,” etc.
1
Viewed from shaft end.

I-4

MODEL B-8200 • TWO-STAGE HIGH CAPACITY
HIGH PRESSURE (NOT PICTURED) AND
MODEL B-8800 • TWO-STEP TWO-STAGE
y
y
y
y
y
y
y
y

Two-pipe installations up to 17” hg. Vacuum
Lift or gravity feed applications with 10 psi maximum
inlet/return pressure
Adjustable manual or automatic high/low firing
High efficiency burner applications
Capacities to 23 gph
Pressure adjustable (100 to 200 psi low fire, 200-300
psi high fire)
For no. 2 fuel oil. For other fuels, consult factory
Two-bolt flange mounting in any position except
upside down.

SPECIFICATIONS*/ORDERING INFORMATION

I-5

Model
Number

RPM

B2VA-8243
B2TA-8245
B2TA-8248

3450
3450
3450

B2TA-8850
B2TA-8851
B2GA-8852

3450
3450
3450

Rotation1
High-Capacity Units
R.H.
R.H.
R.H.
Two-Step Units
R.H.
R.H.
R.H.

Nozzle
Port
Location1

Strainer
& Nozzle
Rating at
300 psi

R.H.
R.H.
R.H.

3 gph2
16 gph
8 gph3

R.H.
R.H.
R.H.

10 gph
16 gph
23 gph

*Also apply to “-8” model numbers (shown on fuel unit). For example:
“8850-8,” etc.
1
2
3
Viewed from shaft end.
At 130 psi.
At 150 psi.

MODEL J • SINGLE-STAGE FUEL UNITS
y
y
y
y
y
y
y

Single-pipe gravity feed installations
Two-pipe lift installations to 12” hg. vacuum
Lift or gravity feed applications with 10 psi maximum
inlet/return pressure
Capacities to 60 gph
Six pressure options, 10 to 300 psi*
For no. 4 and lighter fuel oils (gasoline and JP fuels,
special)
Hub and flange mounting in any position.

I-6

SPECIFICATION* /ORDERING INFORMATION

Maximum Firing Rate* (gph)
1725 rpm
3450 rpm
100 psi
300 psi2
100 psi
300 psi3
JJ2
Std.
--3
-JA2
Std.
--7
-JB2
Std.
--10
-J2
Std.
3
-16
-J3
Std.
7
-20
-G
8
-24
10
N
9
-26
14
J4
Std.
11
-30
17
N
13
-33
23
J5
Std.
17
-40
28
N
19
5
46
32
J6
Std.
24
7
55
40
N
26
10
60
45
*Special Pressure Spring Choices:
A = 20-40 psi
C = 150-300 psi
E = 10-20 psi
B = 75-200 psi
D = 40-80 psi
1
Do not adjust J2 and 3450 rpm-only models (JA, JB, JJ) to higher than 100 psi.
2
Requires C spring (100-300 psi range).
3
Requires C spring and hardened gear.
Model
Number1

Piston
Type

I-7

Typical Model Number Nomenclature
(Model J & Model H):*

* The model number appears on the top of the fuel unit.

MODEL H TWO-STAGE FUEL UNITS
y
y
y
y
y
y

Two-pipe high lift installations to 17” hg. vacuum
Capacities to 83 gph
Lift or gravity feed applications with 10 psi
maximum inlet/return pressure
Six pressure options, 10 to 300 psi*
For no. 4 and lighter fuel oils (gasoline and JP
fuels, special)
Three hub and flange mounting options: Model H
may be mounted with the valve horizontal at either
the top or bottom. Valve may be mounted vertical
provided the adjusting screw is at the top of CW
rotation-left nozzle and CCW rotation-right nozzle
models, or adjusting screw at bottom on CW
rotation-right nozzle and CCW rotation-left nozzle
models.

I-8

SPECIFICATIONS* /ORDERING INFORMATION

Model
Number1

Piston
Type

HA2
H2
H3

Std.
Std.
Std.
G
N
Std.
N
Std.
N
Std.
N
Std.
N
Std.
N

H4
H5
H6
H7
H8

Maximum Firing Rate* (gph)
1725 rpm
3450 rpm
100 psi
300 psi2
100 psi
300 psi3
-3
7
8
9
11
13
17
19
24
26
40
42
80
83

--------5
7
10
17
20
47
55

*Special Pressure Spring Choices:
A = 20-40 psi
C = 150-300 psi
B = 75-200 psi
D = 40-80 psi

7
16
20
24
26
30
33
40
46
55
60
-----

---10
14
17
23
28
32
40
45
-----

E = 10-20 psi

Do not adjust H2 and 3450 rpm-only models (HA, HB, HH) to higher than 110 psi.
Requires C spring (100-300 psi range).
3
Requires C spring and hardened gear.
1
2

I-9

MODEL R & C • SHUT-OFF VALVES
y
y
y
y
y
y

y
y
y
y

For instantaneous, redundant
cutoff of fuel supply
Provides back-up protection
Closes when current to solenoid
coil is interrupted
Blocks oil flow to nozzle
Delay or non-delay opening
Two model choices: Model R
mounts to fuel unit; Model C
mounts to burner or other remote
locations
Easy installation
Use with any fuel unit rated up to
16 gph
Suitable for no. 2, no. 1 fuel oil or
kerosene
Mount in any position

I-10

SPECIFICATIONS/ ORDERING INFORMATION

Valve Model No.
Opening
Pump Burner
Response
Mount Mount
R642N C642N Non-Delay
R641D C641D
Delay
R753N C753N Non-Delay
R261N

C261N

Non-Delay

Color Code

115
115
220

Maximum
Operating
Pressure
300 psi
150 psi
300 psi

Black
Grey
Black

24

300 psi

Green

Voltage
(50/60 Hz.)

I-11

Coil

Lead Wires
Orange/White
Orange/White
Red/White
Blue/Brown/
Yellow & Green

Typical Model Number Nomenclature
(Model R & Model C):*

*The model number appears on the valve label.

I-12



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Create Date                     : 2003:12:15 21:43:57Z
Modify Date                     : 2007:12:20 13:42:05-04:00
Metadata Date                   : 2007:12:20 13:42:05-04:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Creator                         : dleonard
Title                           : Word Pro - Installation and Service Manual - Section I.lwp
Document ID                     : uuid:0b33b899-b2e7-4cb2-af0f-5eefc56daeb1
Instance ID                     : uuid:2c7e05e1-fff6-4785-85e2-c8a0af5a5437
Page Count                      : 12
Author                          : dleonard
EXIF Metadata provided by EXIF.tools

Navigation menu