537456 1 Zoeller Full Flow Unicheck Valve Brochure User Manual
537458 1 Zoeller Full Flow Unicheck Valve Brochure 537458_1_Zoeller Full Flow Unicheck Valve Brochure
537457 1 Zoeller Full Flow Unicheck Valve Brochure 537457_1_Zoeller Full Flow Unicheck Valve Brochure 537457_1_Zoeller Full Flow Unicheck Valve Brochure pdf pumpproducts
User Manual: Pump 537456 1 Zoeller Full Flow Unicheck Valve Brochure
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
SECTION: 4.10.100 Your Peace of Mind is Our Top Priority ® FM0217 0414 Supersedes 0114 ® Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347 SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961 (502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624 visit our web site: www.zoeller.com THE “FULL-FLOW” UNICHECKS 30-0163 30-0164 1¼" CAST IRON NPT 1½" CAST IRON NPT • • • • • • • • • • 30-0163 Pictured 30-0021 30-0151 Outside dimensions 5 1/16" W x 4" W x 6 ¼" H • 30-0152 Vertical or horizontal installation Full-flow design, no restrictions 30-0160 Stops backflow of water Standard, 1¼", 1½", 2", 3" female NPT pipe Neoprene polyester reinforced flapper, smooth edge design with cast iron and noncorrosive metal backing plates & stainless steel fastener Corrosion-resistant powder coated epoxy finish Rated at 50 PSI (115 feet of head) at 130°F Stainless steel bolts 1 per carton Weight: 30-0163, 7.5 lbs.; 30-0164, 7.5 lbs.; 30-0152, 10 lbs.; 30-0160, 18 lbs. 30-0160 Pictured Suitable for installation below basin cover Outside dimensions 6 5/8" W x 6 5/8" W x 8" H 2" PLASTIC SLIP X SLIP UNIONS 2" CAST IRON SLIP X SLIP UNIONS • Full 2" flow design - meets BOCA (P.604.2) 2" full flow pump code • Checks backflow of water and sewer gas • Simple to install (no threading of pipe required). Save time & material costs • Neoprene gasket and flapper, weighted with heavy stainless steel metal backing plates and rivet • Can be installed on vertical or horizontal line • Slips over PVC, steel pipe or copper piping • Reduces motor and pump noise from plumbing system • 6 per carton • Flexible neoprene slip x slip union includes stainless steel clamps for low pressure systems. Avoid more than 10 ft. static head above the check valve. 4.3 PSI at 130°F • Extra wide hinge to reduce hinge stress • Plastic check has PVC body and can be installed with solvent welded couplings for pressure systems to 25 PSI, 57 ft. of head (P/N 30-0023) • Model 30-0151 has corrosion-resistant powder coated epoxy finish. • Plastic check individual rack pack Model 30-0022 Consult Factory or local representative for state approvals 30-0181 30-0200 2" CAST IRON NPT 3" CAST IRON NPT 30-0151 Cast Iron 30-0021 Pvc Plastic 30-0181 Pictured 30-0200 Pictured 1¼" - 1½" SLIP X SLIP UNION 1¼" - 1½" SLIP X SLIP UNION W/ SS SCREW & CLAMPS • Flapper bends over a radius, no sharp 90° edges — lengthens life of flapper hinge • PVC plastic check body, ultrasonically welded and can be solvent welded for rigid pressure rated piping systems to 25 PSI, 57 ft. of head at 130°F (30-0182) • Slip x slip for 4.3 PSI, 10 ft. of head at 130°F. Avoid more than 10 ft. static head above the check valve. • Vertical or horizontal installation • Available in individual packages for pegboard display (30-0181) • All stainless steel screws, nuts and clamps on model 30-0200 only • Stainless steel clamps with zinc screws on model 30-0181 only • Designed to reduce water hammer • 10 per carton © Copyright 2014 Zoeller Co. All rights reserved. HIGH-TEMPERATURE “FULL-FLOW” UNICHECKS • • • • • • 30-0214 1¼" CAST IRON NPT 30-0215 1½" CAST IRON NPT 30-0216 2" CAST IRON NPT • • • • • 30-0214 Pictured Use with 2000 & 3000 series high-temperature pumps Vertical or horizontal installation Full-flow design, no restrictions Stops backflow of water Standard, 1¼", 1½", 2" female NPT pipe EPDM strand-reinforced flapper, smooth-edge design, with cast iron and noncorrosive metal backing plates & stainless steel fastener. Corrosion-resistant powder coated epoxy finish Rated at 50 PSI (115 feet of head) at 200°F Stainless steel bolts 1 per carton Weight: 30-0214, 7.5 lbs.; 30-0215, 7.5 lbs.; 30-0216, 10 lbs. The “Combo” ® 30-0100 30-0102 30-0101 30-0103 1½" PVC CHECK VALVE / BALL VALVE UNION COMBINATION 2" PVC CHECK VALVE / BALL VALVE UNION COMBINATION 1½" PVC CHECK VALVE UNION COMBINATION 30-0101 Pictured • Full-flow check valve design • Threaded union allows pump to be removed without disrupting discharge piping. • Saves time and money - easy to install • Neoprene gasket and flapper, weighted with stainless steel backing plates and rivet • Can be installed on vertical or horizontal pipe • Meets plumbing codes requiring a ball valve installed in conjunction with a check valve.* 30-0100 Pictured 2" PVC CHECK VALVE UNION COMBINATION • • • • • • 30-0103 Pictured All stainless steel screws Replaceable flapper in the check valve Extra wide hinge to reduce stress Rated for 25 psi, 58 ft. of head 6 Per carton (30-0100 & 30-0101) 9 Per carton (30-0102 & 30-0103) 30-0102 Pictured *Consult Factory or local representative for state approvals INLINE CHECK VALVE 30-0238 1½" INLINE CHECK VALVE • Rubber coupling with stainless steel clamps • Threads into pump discharge • Pre-drilled weephole • 4.3 PSI, 10 ft. of Head • Vertical installation only 30-0238 Pictured ® MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347 SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961 (502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624 Your Peace of Mind is Our Top Priority ® © Copyright 2014 Zoeller Co. All rights reserved. visit our web site: www.zoeller.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2014:04:21 10:41:28-04:00 Creator : Adobe InDesign CS6 (Windows) Modify Date : 2014:10:09 09:39:36-04:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2014:10:09 09:39:36-04:00 Creator Tool : Adobe InDesign CS6 (Windows) Version ID : 1 Instance ID : uuid:0eceac8b-b6dc-46db-95cb-3c3d1dfdf5b2 Original Document ID : adobe:docid:indd:1ddbcc7b-fcbd-11db-9f12-b2865723fa56 Document ID : xmp.id:11D74EA261C9E311979DB926E09A8049 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:34C56F7BA1C1E311A9A3FC6964C4CDE0 Derived From Document ID : xmp.did:FC946204ADABE311811CC20B46EF3DE1 Derived From Original Document ID: adobe:docid:indd:1ddbcc7b-fcbd-11db-9f12-b2865723fa56 Derived From Version ID : 1 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2014:04:21 10:41:28-04:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 2EXIF Metadata provided by EXIF.tools