538132 1 Goulds WS BHF Series Submersible Sewage Pump Brochure

: Pump 538132 1 Goulds Ws-Bhf Series Submersible Sewage Pump Brochure 538132_1_Goulds WS-BHF Series Submersible Sewage Pump Brochure pdf

Open the PDF directly: View PDF PDF.
Page Count: 4

FEATURES
Impeller: Cast iron, enclosed, non-clog, dynamically balanced with pump
out vanes for mechanical seal protection.
Casing: Cast iron anged volute type for maximum efciency. Designed
for easy installation on A10-20 slide rail or base elbow rail systems.
Mechanical Seal: SILICON CARBIDE VS. SILICON CARBIDE sealing faces
for superior abrasive resistance, stainless steel metal parts, BUNA-N
elastomers.
Shaft: Corrosion-resistant, 300 series stainless steel. Threaded design.
Locknut on all models to guard against component damage on
accidental reverse rotation.
Fasteners: 300 series stainless steel.
Capable of running dry without damage to components.
Designed for continuous operation when fully submerged.
EXTENDED WARRANTY AVAILABLE FOR RESIDENTIAL APPLICATIONS.
WS_BHF Series
Model 3887BHF
SUBMERSIBLE SEWAGE PUMP
TECHNICAL BROCHURE
B3887BHF R2
PAGE 2
Wastewater
Goulds Water Technology
020406080240 U.S. GPM
0
10
20
30
40
FEET
TOTAL DYNAMIC HEAD
0
5
10
15
METERS
FLOW RATE
SERIES: WS_BHF
DISCHARGE: 2”
SOLIDS: 2"
RPM: 3500
100 120 140
50
03010 20 m3/h
50
100
60
70
80
90
20
25
30
160 180 200 220
40
WS20BHF
WS15BHF
WS10BHF
WS07BHF
WS05BHF
WS03BHF
5 FT
10 GPM
APPLICATIONS
Specically designed for the following uses:
• Homes • Water transfer
• Sewage systems • Light industrial
• Dewatering/Efuent • Commercial applications
Anywhere waste or drainage must be disposed of
quickly, quietly and efciently.
SPECIFICATIONS
Pump
• Solids handling capabilities: 2" maximum
• Capacities: up to 220 GPM
• Total heads: up to 81 feet TDH
• Discharge size: 2" NPT threaded companion ange
as standard. 3" option available but must be ordered
separately. (Order no. A1-3)
• Temperature: 104°F (40°C) continuous
140°F (60°C) intermittent.
MOTORS
• Fully submerged in high grade turbine oil for lubrica-
tion and efcient heat transfer. All ratings are within the
working limits of the motor.
Class B insulation on 1⁄3-11⁄2 HP models.
Class F insulation on 2 HP models.
Single phase (60 Hz):
• Capacitor start motors for maximum starting torque.
• Built-in overload with automatic reset.
• SJTOW or STOW severe duty oil and water resistant
power cords.
• 1⁄3 – 1 HP models have NEMA three prong ground-
ing plugs.
• 1½ HP and larger units have bare lead cord ends.
Three phase (60 Hz):
• Class 10 overload protection must be provided in
separately ordered starter unit.
• STOW power cords all have bare lead cord ends.
• Bearings: Upper and lower heavy duty ball bearing
construction.
• Designed for Continuous Operation: Pump ratings
are within the motor manufacturer's recommended
working limits, can be operated continuously without
damage when fully submerged.
• Power Cable: Severe duty rated, oil and water resistant.
Epoxy seal on motor end provides secondary moisture
barrier in case of outer jacket damage and to prevent
oil wicking. Standard cord is 20'. Optional lengths are
available.
• Motor Cover O-ring: Assures positive sealing against
contaminants and oil leakage.
AGENCY LISTINGS
CU
S
®
Tested to UL 778 and CSA 22.2 108 Standards
By Canadian Standards Association
File #LR38549
PAGE 3
Wastewater
Goulds Water Technology
MOTOR AND MODEL INFORMATION
DIMENSIONS
(All dimensions are in inches. Do not use for construction purposes.)
61⁄4"
121⁄2"
81⁄4"
KICK-BACK
19"
ROTATION
61⁄8"71⁄8"
Discharge Flange
Discharge Flange:
① 2" NPT standard
② 3" NPT optional (order an A1-3)
① ②
Order
Number HP Phase Volts RPM
Impeller
Diameter
(in.)
Maximum
Amps
Locked
Rotor
Amps
KVA
Code
Full Load
Motor
Efciency %
Resistance
Start Line-Line
WS0311BHF
0.33
1
115
3500
2.94
12.4 46.0 M 54 7.5 1.0
WS0318BHF 208 6.8 31.0 K 68 9.7 2.4
WS0312BHF 230 6.2 34.5 M 53 9.6 4.0
WS0511BHF
0.5
115
3.19
14.5 46.0 M 54 7.5 1.0
WS0518BHF 208 8.4 31.0 K 68 9.7 2.4
WS0512BHF 230 7.6 34.5 M 53 9.6 4.0
WS0538BHF
3
200 4.9 22.6 R68 – 3.8
WS0532BHF 230 3.6 18.8 R 70 – 5.8
WS0534BHF 460 1.8 9.4 R 70 – 23.2
WS0537BHF 575 1.5 7.5 R 62 – 35.3
WS0718BHF
0.75
1208
3.44
11.0 31.0 K 68 9.7 2.4
WS0712BHF 230 10.0 27.5 J 65 12.2 2.7
WS0738BHF
3
200 6.2 20.6 L64 – 5.7
WS0732BHF 230 5.4 15.7 K 68 –8.6
WS0734BHF 460 2.7 7.9 K68 – 11
WS0737BHF 575 2.2 9.9 L 78 – 26.5
WS1018BHF
1
1
1
208
3.75
14.5 59.0 K68 9.3 1.1
WS1012BHF 230 13.0 36.2 J69 10.3 2.1
WS1038BHF
3
200 8.6 27.6 M 77 – 2.7
WS1032BHF 230 7.5 24.1 L79 –4.1
WS1034BHF 460 3.8 12.1 L 79 –16.2
WS1037BHF 575 3.1 9.9 L 78 – 26.5
WS1512BHF
1.5
1 230
4.00
18.0 52.0 J 67 2.76 0.53
WS1538BHF
3
200 10.0 42.4 K 78 – 1.7
WS1532BHF 230 9.6 42.4 K 78 – 1.7
WS1534BHF 460 4.8 21.2 K 78 – 6.6
WS1537BHF 575 3.9 16.3 L 78 – 10.5
WS2012BHF
2
1 230
4.44
18.0 49.6 F 78 3.2 1.1
WS2038BHF
3
200 12.0 42.4 K 78 – 1.7
WS2032BHF 230 11.6 42.4 K 78 – 1.7
WS2034BHF 460 5.8 21.2 K 78 – 6.6
WS2037BHF 575 4.7 16.3 L 78 – 10.5
* For repair parts, reference
repair parts book.
7
5
8
1
6
3
4
2
PERFORMANCE RATINGS (gallons per minute) COMPONENTS (for reference only)
Item No. Description
1 Impeller
2 Casing
3 Mechanical Seal
4 Motor Shaft
5 Motor
6 Ball Bearings
7 Power Cable
8 Casing O-Ring
Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license.
© 2012 Xylem Inc. B3887BHF R2 July 2014
Xylem Inc.
2881 East Bayard Street Ext., Suite A
Seneca Falls, NY 13148
Phone: (866) 325-4210
Fax: (888) 322-5877
www.gouldswatertechnology.com
Order
No.
WS03-
BHF
WS05-
BHF
WS07-
BHF
WS10-
BHF
WS15-
BHF
WS20-
BHF
Total Head Feet of Water
HP 1⁄31⁄23⁄41 11⁄22
RPM 3500 3500 3500 3500 3500 3500
10 86 110 140 –––
15 48 88 120 158 – –
20 – 62 98 139 186 217
25 – 32 74 120 170 204
30 – – 49 101 150 190
35 – – 21 82 130 175
40 –––60 110 159
45 – – – 38 88 140
50 – – – – 67 120
55 – – – – 47 100
60 ––––29 80
65 –––––62
70–––––43
75 – – – – – 23

Navigation menu