538721 1 Goulds WE Series Submersible Effluent Pump Brochure

545028 4 Goulds We Series Technical Brochure 545028_4_Goulds WE Series Technical Brochure

: Pump 538721 1 Goulds We Series Submersible Effluent Pump Brochure 538721_1_Goulds WE Series Submersible Effluent Pump Brochure pdf

Open the PDF directly: View PDF PDF.
Page Count: 4

WE Series
Model 3885
SUBMERSIBLE EFFLUENT PUMPS
TECHNICAL BROCHURE
B3885 R1
FEATURES
Impeller: Cast iron, semi-open, non-clog with pump-out vanes for
mechanical seal protection. Balanced for smooth operation. Silicon
bronze impeller available as an option.
Casing: Cast iron volute type for maximum efciency. 2" NPT
discharge.
Mechanical Seal: Silicon Carbide vs. Silicon Carbide sealing faces.
Stainless steel metal parts, BUNA-N elastomers.
Shaft: Corrosion-resistant, stainless steel. Threaded design.
Locknut on all models to guard against component damage on
accidental reverse rotation.
Fasteners: 300 series stainless steel.
Capable of running dry without damage to components.
Designed for continuous operation when fully submerged.
EXTENDED WARRANTY AVAILABLE FOR RESIDENTIAL
APPLICATIONS.
PAGE 2
Wastewater
Goulds Water Technology
APPLICATIONS
Specically designed for the following uses:
• Homes, Farms, Trailer Courts, Motels, Schools,
Hospitals, Industry, Efuent Systems
SPECIFICATIONS
Pump
• Solids handling capabilities: 3⁄4" maximum
• Discharge size: 2" NPT
• Capacities: up to 140 GPM
• Total heads: up to 128 feet TDH
• Temperature:
104°F (40°C) continuous, 140°F (60°C) intermittent.
• See order numbers on reverse side for specic HP,
voltage, phase and RPM’s available.
MOTORS
• Fully submerged in high-grade turbine oil for lubri-
cation and efcient heat transfer.
• Class B insulation on 1⁄3 – 1½ HP models.
• Class F insulation on 2 HP models.
Single phase (60 Hz):
• Capacitor start motors for maximum starting torque.
• Built-in overload with automatic reset.
• SJTOW or STOW severe duty oil and water resistant
power cords.
• 1⁄3 – 1 HP models have NEMA three prong grounding
plugs.
• 1½ HP and larger units have bare lead cord ends.
Three phase (60 Hz):
• Class 10 overload protection must be provided in
separately ordered starter unit.
• STOW power cords all have bare lead cord ends.
• Designed for Continuous Operation: Pump ratings
are within the motor manufacturer's recommended
working limits, can be operated continuously with-
out damage when fully submerged.
• Bearings: Upper and lower heavy duty ball bearing
construction.
• Power Cable: Severe duty rated, oil and water resis-
tant. Epoxy seal on motor end provides secondary
moisture barrier in case of outer jacket damage and
to prevent oil wicking. Standard cord is 20'. Option-
al lengths are available.
• O-ring: Assures positive sealing against contami-
nants and oil leakage.
AGENCY LISTINGS
CUS
®
Tested to UL 778 and CSA 22.2 108 Standards
By Canadian Standards Association File #LR38549
130
0102030405060708090 100 110 120 GPM
0
0
10
10
0
20
30
20 m3/hr
5
40
20
15
10
80
70
60
50
40
METERS FEET
TOTAL DYNAMIC HEAD
CAPACITY
160
SERIES: WE
SIZE: 3/4" SOLIDS
RPM: 3500 &
1750
90
100
110
120
35
30
25
130 140 150
35302515
5
WE03L
WE03M
WE05H
WE07H
WE10H
WE15H
WE20H
WE15HH
5 FT
5 GPM
WE05HH
(M) (L)
PAGE 3
Wastewater
Goulds Water Technology
MODELS
Order
Number HP Phase Volts RPM
Impeller
Diameter
(in.)
Maximum
Amps
Locked
Rotor
Amps
KVA
Code
Full Load
Efciency %
Resistance Power
Cable Size
Weight
(lbs.)
Start Line-Line
WE0311L
0.33
1
115
1750 5.38
10.7 30.0 M54 11.9 1.7
16/3 56
WE0318L 208 6.8 19.5 K 51 9.1 4.2
WE0312L 230 4.9 14.1 L 53 14.5 8.0
WE0311M 115 10.7 30.0 M54 11.9 1.7
WE0318M 208 6.8 19.5 K 51 9.1 4.2
WE0312M 230 4.9 14.1 L 53 14.5 8.0
WE0511H
0.5
115
3450
3.56
14.5 46.0 M54 7.5 1.0 14/3
60
WE0518H 208 8.1 31.0 K 68 9.7 2.4 16/3
WE0512H 230 7.3 34.5 M53 9.6 4.0
WE0538H
3
200 4.9 22.6 R 68 NA 3.8
14/4
WE0532H 230 3.3 18.8 R 70 NA 5.8
WE0534H 460 1.7 9.4 R 70 NA 23.2
WE0537H 575 1.4 7.5 R 62 NA 35.3
WE0511HH
1
115
3.88
14.5 46.0 M54 7.5 1.0 14/3
WE0518HH 208 8.1 31.0 K 68 9.7 2.4 16/3
WE0512HH 230 7.3 34.5 M53 9.6 4.0
WE0538HH
3
200 4.9 22.6 R 68 NA 3.8
14/4
WE0532HH 230 3.6 18.8 R 70 NA 5.8
WE0534HH 460 1.8 9.4 R 70 NA 23.2
WE0537HH 575 1.5 7.5 R 62 NA 35.3
WE0718H
0.75
1208
4.06
11.0 31.0 K 68 9.7 2.4 14/3
70
WE0712H 230 10.0 27.5 J 65 12.2 2.7
WE0738H
3
200 6.2 20.6 L 64 NA 5.7
14/4
WE0732H 230 5.4 15.7 K 68 NA 8.6
WE0734H 460 2.7 7.9 K 68 NA 34.2
WE0737H 575 2.2 9.9 L 78 NA 26.5
WE1018H
1
1208
4.44
14.0 59.0 K 68 9.3 1.1 14/3
WE1012H 230 12.5 36.2 J 69 10.3 2.1
WE1038H
3
200 8.1 37.6 M77 NA 2.7
14/4
WE1032H 230 7.0 24.1 L 79 NA 4.1
WE1034H 460 3.5 12.1 L 79 NA 16.2
WE1037H 575 2.8 9.9 L 78 NA 26.5
WE1518H
1.5
1208
4.56
17.5 59.0 K 68 9.3 1.1 14/3
80
WE1512H 230 15.7 50.0 H 68 11.3 1.6
WE1538H
3
200 10.6 40.6 K 79 NA 1.9
14/4
WE1532H 230 9.2 31.7 K 78 NA 2.9
WE1534H 460 4.6 15.9 K 78 NA 11.4
WE1537H 575 3.7 13.1 K 75 NA 16.9
WE1518HH 1208
5.50
17.5 59.0 K 68 9.3 1.1 14/3
WE1512HH 230 15.7 50.0 H 68 11.3 1.6
WE1538HH
3
200 10.6 40.6 K 79 NA 1.9
14/4
WE1532HH 230 9.2 31.7 K 78 NA 2.9
WE1534HH 460 4.6 15.9 K 78 NA 11.4
WE1537HH 575 3.7 13.1 K 75 NA 16.9
WE2012H
2
1230
5.38
18.0 49.6 F 78 3.2 1.2 14/3
83
WE2038H
3
200 12.0 42.4 K 78 NA 1.7
14/4
WE2032H 230 11.6 42.4 K 78 NA 1.7
WE2034H 460 5.8 21.2 K 78 NA 6.6
WE2037H 575 4.7 16.3 L 78 NA 10.5
PERFORMANCE RATINGS (gallons per minute)
7
5
8
1
2
6
4
3
COMPONENTS
Item No. Description
1 Impeller
2 Casing
3 Mechanical Seal
4 Motor Shaft
5 Motor
6 Ball Bearings
7 Power Cable
8 Casing O-Ring
DIMENSIONS
(All dimensions are in inches. Do not use for construction purposes.)
Order
No.
WE-
03L
WE-
03M
WE-
05H
WE-
07H
WE-
10H
WE-
15H
WE-
05HH
WE-
15HH
WE-
20H
Total Head Feet of Water
HP 1⁄31⁄31⁄23⁄41 11⁄21⁄211⁄22
RPM
1750 1750 3500 3500 3500 3500 3500 3500 3500
5 86 – – – – – – – –
10 70 63 78 94 – – 58 95 –
15 52 52 70 90 103 128 53 93 138
20 27 35 60 83 98 123 49 90 136
25 5 15 48 76 94 117 45 87 133
30 – – 35 67 88 110 40 83 130
35 – – 22 57 82 103 35 80 126
40 – – – 45 74 95 30 77 121
45 – – – 35 64 86 25 74 116
50 – – – 25 53 77 – 70 110
55 – – – – 40 67 – 66 103
60 – – – – 30 56 – 63 96
65 – – – – 20 45 – 58 89
70 – – – – – 35 – 55 81
75 – – – – – 25 – 51 74
80 – – – – – – – 47 66
90 – – – – – – – 37 49
100 – – – – – – – 28 30
16" 2" NPT
31⁄4"
7⁄8"
111⁄2"
ROTATION
81⁄2"
KICK-BACK
53⁄4"
Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license.
© 2012 Xylem Inc. B3885 R1 April 2012
Xylem, Inc.
2881 East Bayard Street Ext., Suite A
Seneca Falls, NY 13148
Phone: (866) 325-4210
Fax: (888) 322-5877
www.gouldswatertechnology.com

Navigation menu