538800 1 Goulds Accesories And Fittings Brochure

: Pump 538800 1 Goulds Accesories And Fittings Brochure 538800_1_Goulds Accesories and Fittings Brochure pdf

Open the PDF directly: View PDF PDF.
Page Count: 4

FEATURES
Gauges
Boxes of Fittings
Turned Coupling
Pressure Control Valves
Well Seals
Air Volume Controls
Valves and Fittings
4" x 6" Motor Adapter
6K210 Gauge Guard
ACCESSORIES –
FITTINGS
TECHNICAL BROCHURE
BFITTING
PAGE 2
Goulds Water Technology
Residential Water Systems
GAUGES
AG5 Pressure Gauge:
Quality 100 lb. pressure
gauge for pneumatic
tank service. Threaded ¼”
male pipe.
AG2 Pressure Gauge:
Quality 200 lb. pressure
gauge for pneumatic
tank service. Threaded ¼”
male pipe.
TURNED COUPLING
64655 Turned Coupling:
1¼” for use with Packer
System P-2 Packages,
where well diameter does
not permit use of stan-
dard coupling.
BOXES OF FITTINGS
For Submersible Water Systems
Fittings for 5GS (all), 7GS (all), and
10GS (1⁄3-¾ HP)
Box No. FU10-1: For
use with pressure tanks.
Includes:
• AV19-10 – Check Valve
Control Center (1”)
• AG5 – Pressure Gauge
• AS4 – Pressure Switch
(set at 30-50)
• Schrader Valve
PRESSURE CONTROL
VALVES
AV1: For use with Goulds
Water Technology Series
GH Deep Well Water
System.
AV21: For use with Series
SJ, VJ and VS.
AV22KIT: For use with
Series JRD, J+, HSJ Deep
Well Jet Systems.
AV15: For use with Series
J Deep Well basic units
(not tank mounted).
WELL SEALS
AW5 Well Seals for Twin
Pipe Installations: The
sanitary well seals prevent
foreign matter from get-
ting in the well. Opening
for vent pipe.
Cat. No. Dia. of Press. Suction
Casing Pipe Pipe
AW54112 4” 1” 1¼”
AW558112 55⁄8” 1” 1¼”
AW56112 6” 1” 1¼”
AW56125 6” 1¼” 1½”
AW6 Well Seals for Sub-
mersible Installations:
Same basic construction
as AW5 except there is
only one pipe opening.
The second opening is
used for submersible
cable coming up out of
the well. Opening for vent
pipe.
Cat. No. Diameter Discharge
of Casing Pipe
AW641 4” 1”
AW6412 4” 1¼”
AW642 4” 2”
AW651 5” 1”
AW6581 55⁄8” 1”
AW661 6” 1”
AW6612 6” 1¼”
AW662 6” 2”
AG5
Part No. ADAPT46 is available for installations
where a 6" motor is desired. The kit contains a 4" x
6" adapter, a 4" to 6" splined shaft extension and re-
quired bolts. Connects a 4" water end to a 6" motor.
PAGE 3
Goulds Water Technology
Residential Water Systems
AIR VOLUME CONTROLS
6K210 GAUGE GUARD
AA1I Air Volume Control
for Series BF Pumps: The
AA1 air volume control
admits air when needed
and automatically main-
tains the proper volume.
Control body threaded
1¼” pipe size. Weight 1
lb. Tubing not included.
AA2 Air Volume Control:
This control is the same as
AA1 with the exception of
a ¼” pipe tapping on the
top side of the body for
gauge or pressure switch
installation. Includes
tubing, two sleeves and
two nuts. Control body
threaded 1¼” pipe size.
Features:
• Protects transducers and pressure switches from dirt, corrosion and vacuum
conditions.
• Low unit cost - makes it feasible to protect even moderate priced instruments.
• Compact size makes these isolators ideal for limited-space installations.
• + 4% accuracy. Will handle most applications.
• Hermetically-sealed, molded uni-body construction - avoids possibility of leaks.
• Glass-lled Polypro bodies for chemical compatibility and maximum temperatures to
100° F.
• Housing is glass lled Polypropylene.
• Each Gauge Guard features a durable and exible Buna-N diaphragm which serves
as a protective barrier between the process uid and instrument.
• Simple to ll and install. Completely ll the internal space on the instrument side
of the diaphragm with mineral or vegetable oil in order to transmit the process
pressure to the instrument.
MAXIMUM PRESSURE RATINGS:
Liquids Gases Maximum Temperature
200 PSI (13.8 bars) 100 PSI (6.9 bars) 100° F (38° C)
AA4 Air Escape Control
for Submersible Pumps:
Excess air is vented from
the tank through the body
of the air volume control.
Control body threaded
1¼” pipe size for mount-
ing in hole on side of the
tank. Has ¼” pipe tapping
on the top side of the
body for gauge or pres-
sure switch installation.
Control good for 150 lbs.
maximum working pres-
sure. Weight 1¼ lbs.
AA8-7 Air Volume Con-
trol for Jet Pumps: Dia-
phragm type air volume
control for mounting on
side of tank. Plastic spring
insert protects against
scratching. Threaded 3⁄8”
male for tank connection.
1⁄8” x ¼” connector for ¼”
copper tubing. No tubing
or ttings included.
AA8-8 Air Volume Con-
trol Complete: Includes
AA8-7 control with 1¼”
x 3⁄8” bushing. 42” of ¼”
copper tubing with two
straight ttings 1⁄8” x ¼”
with nuts and ferules.
AA7 Air Valve: For use
in connection with air vol-
ume control AA1 or AA2.
Also used with oating
disc style tanks.
4K170 Snifter Valve:
Installed in check valve
AV9 used on submersible
installations with drain
and “Y” tting.
Note: replaces AA10.
VALVES AND FITTINGS
AV5 Foot Valves: Lead-
free silicon bronze body
with stainless steel strainer.
Order No. Pipe Outside
Size Diameter
AV5-07 ¾” 111⁄16”
AV5-10 1” 115⁄16”
AV5-12 1¼” 2¼”
AV5-15 1½” 27⁄8”
AV5-20 2” 3½”
AV6 Check Valves: Lead-
free silicon bronze con-
struction.
Order No. Pipe Size
AV6-10 1”
AV6-12 1¼”
AV6-15 1½”
AV6-20 2”
AV6-30I (iron) 3”
AV6-40I 4”
(ductile iron body)
AV9 Line Check Valve:
Lead-free silicon bronze
construction line check
valve includes a 4K170
snifter valve.
Order No. Pipe Size
AV9-20 2”
AV11 Drain and “Y” Fit-
tings: The drain tting set
at a 45º angle in the “Y”
tting to insure positive
action in the air charging
cycle. Its simple construc-
tion is designed to provide
trouble-free service. In-
cludes AV11-21 ball valve.
Order No. Pipe Size
AV11-10 1”
AV11-12 1¼”
AV11-20 2”
AV11-21 Ball Valve As-
sembly: For all AV-11 drain
and “Y” ttings.
AV12 Relief Valves: It
is desirable to use this
lead-free silicon bronze
relief valve with any pump
capable of producing more
than 75 psi at the tank. Re-
lief valve must be sized for
pump capacity in GPH.
Order Size Pressure Capacity
No. Setting GPM
AV12-05 ½” 75±10 PSI up to
12
AV12-07 ¾” 75±10 PSI 13-17
AV12-14 ¾” 95±10 PSI 13-17
AV12-10 1” 75±10 PSI 17-28
AV12-12 1¼” 65±10 PSI 28-38
AV19 Check Valve Con-
trol Center: Has two ¼”
pipe tappings and two 1⁄8”
pipe tappings. Lead-free
silicon bronze construction.
Order No. Pipe Size
AV19-10 1”
AV19-12 1¼”
Tank Cross Tees
Order No. Description
AV20-10 1” x 10” with (2) ¼”
and (1) ½” holes
AV20-11 1” x 10” with (2) ¼”
and (2) ½” holes
AV20-12 1¼” x 13” with (2) ¼”
and (1) ¾” holes
AV20-13 1¼” x 16” with (2) ¼”
and (2) ¾” holes
Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license.
© 2012 Xylem Inc. BFITTING R1 April 2012
Xylem, Inc.
2881 East Bayard Street Ext., Suite A
Seneca Falls, NY 13148
Phone: (866) 325-4210
Fax: (888) 322-5877
www.xyleminc.com/brands/gouldswatertechnology

Navigation menu