539631 1 Sta Rite D Series Centrifugal Pump Brochure

539623 1 Sta-Rite D Series Centrifugal Pump Brochure 539623_1_Sta-Rite D Series Centrifugal Pump Brochure 539623_1_Sta-Rite D Series Centrifugal Pump Brochure pdf pumpproducts

543729 1 Sta-Rite D Series Centrifugal Pump Brochure 543729_1_Sta-Rite D Series Centrifugal Pump Brochure 543729_1_Sta-Rite D Series Centrifugal Pump Brochure pdf pumpproducts 3:

: Pump 539631 1 Sta-Rite D Series Centrifugal Pump Brochure 539631_1_Sta-Rite D Series Centrifugal Pump Brochure pdf

Open the PDF directly: View PDF PDF.
Page Count: 4

STA-RITE® D Series
Self-priming centrifugal pumps
Some of the fastest priming pumps on
the market. Available in high head or
medium head series. Features
mechanical seals, easy service design,
heavy-duty motors, rugged construc-
tion. Available in 1 through 5 HP.
Optional 6" and 8" Trap Packages
are available.
APPLICATIONS
Lawn Sprinkling…
operate from
1 to 30 or more heads. Can be safely
operated by timer or other
automatic device.
Contractors…
for dewatering
exca va tion, jetting, water transfer and
supply operations.
Agriculture…
seed bed and plot irrigation,
stock watering, fire protection.
Industrial…
sump drainage, fire protection,
marine pumping, liquid transfer and
supply operations.
Order suction
flange with flapper
check separately.
Noryl® is a registered trade mark of General Electric Co.
All other brand or product names are trademarks or registered trademarks of Pentair Ltd.
3 and 5 HP
1, 1-1/2,
2, 2-1/2 HP
UL778/CSA108
SPECIFICATIONS
Body and Base:
Close-grained
cast iron
Impeller:
Noryl
®
on 1 through
2-1/2 HP, bronze on 3 and 5 HP
Diffuser:
Cast iron
Shaft:
1 through 2-1/2 HP: 416 stainless
steel; 3 and 5 HP: Carbon steel inside
removable shaft sleeve of stainless steel.
FEATURES
1 through 5 HP:
Both high
head and medium head models
offer heavy-duty motors, easy service
design, and air volume control tapping.
Drain Port:
Provided for easy winterizing.
Medium Head Models:
Deliver up to 115'
of head with capacities to 159 GPM.
High Head Models:
Deliver up
to 138' of head with capacities to
162 GPM.
Easy Serviceability:
Normal wearing
parts are easily accessible for service and
replacement, without disturbing piping
or mounting.
Heavy-Duty Motors:
Designed for
continuous operation. Capacitor start, will
not cause electrical interference with TV or
other appliances. Nationally known motors
have ball bearing, stainless steel shaft. For
single- and three-phase operation,
3450 RPM.
1s4517ws
STA-RITE® D Series
Self-priming centrifugal pumps
6 INCH TRAP
8 INCH TRAP
11 INCH TRAP
7.88
3.28
3.28
SUCTION
2" NPT
11.25
4.75 3.44
5.93
SUCTION
3" NPT
14.25
5.94
3.69
5.44
.62
10.38
SUCTION
3" NPT
1/4" NPT
10.31
6.73
6 INCH TRAP
8 INCH TRAP
11 INCH TRAP
7.88
3.28
3.28
SUCTION
2" NPT
11.25
4.75 3.44
5.93
SUCTION
3" NPT
14.25
5.94
3.69
5.44
.62
10.38
SUCTION
3" NPT
1/4" NPT
10.31
6.73
PKG 51
6-INCH TRAP
PRESSURE DROP (PSI)
CAPACITY GALLONS PER MINUTE
0
2
4
6
1
3
5
40 80 120 160 18020 60 100 140
PKG. 51
6" TRAP PKG. 98
8" TRAP
PKG 76
PKG 52 PKG 53
1-1/2" 2" NPT
PKG 72 PKG 73
2-1/2" 3" NPT
ORDERING INFORMATION
HIGH HEAD
Catalog
Number HP Pipe Tapping Sizes Motor Voltage Phase Approx. Wt. Lbs.
Suction Flanges* Pump Discharge
DHE 1 PKG 52 1-1/2" 115/230 1 65
DHE3 1 PKG 52 1-1/2" 208-230/460 3 65
DHF 1-1/2 PKG 52 1-1/2" 115/230 1 72
DHF3 1-1/2 PKG 52 1-1/2" 208-230/460 3 72
DHG 2 PKG 53 2" 115/230 1 113
DHG3 2 PKG 53 2" 208-230/460 3 113
DHHG 2-1/2 PKG 53 2" 115/230 1 120
DHHG3 2-1/2 PKG 53 2" 208-230/460 3 120
DHH 3 PKG 53 2" 230 1 144
DHH3 3 PKG 53 2" 208-230/460 3 144
DHJ 5 PKG 72 2" 230 1 184
DHJ3 5 PKG 72 2" 208-230/460 3 184
MEDIUM HEAD
DMG 2 PKG 52 1-1/2" 115/230 1 86
DMG3 2 PKG 52 1-1/2" 208-230/460 3 86
DMMG 2-1/2 PKG 53 2" 115/230 1 93
DMMG3 2-1/2 PKG 53 2" 208-230/460 3 93
DMH 3 PKG 72 2-1/2" 230 1 137
DMH3 3 PKG 72 2-1/2" 208-230/460 3 137
DMJ 5 PKG 73 3" 230 1 184
DMJ3 5 PKG 73 3" 230/460 3 184
*Suction flanges must be ordered separately. See chart below.
SUCTION FLANGES (Order separately – required for suction tap sizes)
Package 52 - Package 53 - Package 72 - Package 73 -
1-1/2" 2" 2-1/2" 3"
6" AND 8" TRAP PACKAGES
Catalog
Number Description Suction
Port Size
Approx.
Wt. Lbs.
PKG 51 6" Cast Iron Trap with Basket
(For C, CC, and D Series Pumps) 2" NPT 20
PKG 76 Cast Iron Flange for Remote Installation 3" NPT 4
PKG 98 8" Cast Iron Trap with Basket
(For C, CC, and D Series Pumps) 3" NPT 40
PKG 98
8-INCH TRAP
2s4517ws
STA-RITE® D Series
Self-priming centrifugal pumps
PUMP PERFORMANCE: HIGH HEAD
CAPACITY GALLONS PER MINUTE
CAPACITY LITERS PER MINUTE
TOTAL HEAD IN FEET
TOTAL HEAD IN METERS
0 200 400 600 800 1000
04080 120 160 200 240 280 320
180
160
140
120
100
80
60
40
20
50
40
30
20
10
0
DMJ
RECOMMENDED OPERATING RANGE
DMH
DMMG
1200
DMG
CAPACITY GALLONS PER MINUTE
CAPACITY LITERS PER MINUTE
TOTAL HEAD IN FEET
TOTAL HEAD IN METERS
0 20 40 60 80 100 120 140 160 180
0 100 200 300 400 500 600
180
160
140
120
100
80
60
40
20
DHH
DHHG
DHJ
DHG
DHF
DHE
50
40
30
20
10
0
RECOMMENDED OPERATING RANGE
PUMP PERFORMANCE: MEDIUM HEAD
PUMP PERFORMANCE (CapaCity in Gallons per Minute)
HIGH HEAD
Cat. No. HP Discharge Suction Lift in Feet
PSI Feet Head 5'10'15'20'25'
DHE 1
20 46.2 46 43 41 40 38
30 69.3 35 32 29 25 21
40 92.4 19 15 – – –
50 115.5 – – – – –
60 138.6 – – – – –
DHF 1-1/2
20 46.2 55 53 51 49 48
30 69.3 45 42 39 36 32
40 92.4 31 27 22 15 –
50 115.5 – – – – –
60 138.6 – – – – –
DHG 2
20 46.2 77 74 71 68 65
30 69.3 63 60 56 53 49
40 92.4 48 44 40 36 30
50 115.5 30 20 13 – –
60 138.6 – – – – –
DHHG 2-1/2
20 46.2 89 85 82 80 76
30 69.3 75 72 68 64 60
40 92.4 60 57 51 49 42
50 115.5 42 37 31 25 20
60 138.6 14 – – – –
DHH 3
20 46.2 – – – 112 109
30 69.3 109 103 98 92 89
40 92.4 90 75 74 69 62
50 115.5 62 51 42 32 20
DHJ 5
20 46.2 – – – – –
30 69.3 – – – – –
40 92.4 146 141 136 130 122
50 115.5 122 114 105 99 85
60 138.6 81 70 50 30 –
MEDIUM HEAD
DMG 2
20 46.2 84 79 74 69 63
30 69.3 60 53 46 35 20
40 92.4 22 – – – –
50 115.5 – – – – –
DMMG 2-1/2
20 46.2 103 96 90 80 70
30 69.3 70 60 50 46 30
40 92.4 30 18 5 – –
50 115.5 – – – – –
DMH 3
20 46.2 149 140 136 124 119
30 69.3 116 108 99 85 76
40 92.4 75 65 51 26 –
DMJ 5
20 46.2 214 209 202 194 182
30 69.3 185 179 172 165 158
40 92.4 153 146 139 130 120
50 115.5 119 107 95 80 50
3s4517ws
STA-RITE® D Series
Self-priming centrifugal pumps
293 WRIGHT STREET, DELAVAN, WI 53115 WWW.STARITE.COM PH: 8887827483 ORDERS FAX: 8004269446
Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.
3 and 5 HP
A
J NPT
DISCHARGE C
H
6D
1/2 SPT
K
3-1/2
1-1/2 or 2 NPT
B
LL1/2
E
F
G
3/8 DIA.
(4) HOLES
Ordered
Separately
1 through 2-1/2 HP
Dimensions (in inches) are for estimating purposes only.
OUTLINE DIMENSIONS
*Overall length (C) is shown for single-phase motors. Three-phase motors are slightly smaller. Dimensions are for estimating purposes only.
DIMENSIONS IN INCHES: 1 THROUGH 21/2 HP
Catalog Number HP A B C D E F G H J K L
DHE 1 14-13/16 7-1/16 3-1/2 4 11-7/8 7-7/8 3-15/16 5-13/16 1-1/2 7-1/2 3-3/8
DHF 1-1/2 15-11/16 7-1/16 3-1/2 4 11-7/8 7-7/8 3-15/16 5-13/16 1-1/2 7-1/2 3-3/8
DHG 2 17-11/16 7-13/16 3-15/16 3-13/16 14-3/8 9-1/2 4-3/4 6-9/16 2 7-1/2 3-3/8
DHHG 2-1/2 18-11/16 7-13/16 3-15/16 3-13/16 14-3/8 9-1/2 4-3/4 6-9/16 2 7-1/2 3-3/8
DMG 2 16-15/16 7-1/16 3-1/2 4 11-7/8 7-7/8 3-15/16 5-13/16 1-1/2 7-1/2 3-3/8
DMMG 2-1/2 17-15/16 7-1/16 3-1/2 4 11-7/8 7-7/8 3-15/16 5-13/16 2 7-1/2 3-3/8
DIMENSIONS IN INCHES: 3 AND 5 HP
Catalog Number HP A B C* D E F G H L P AB AC
DHH 3 9 6 20-3/4 4-1/2 3-3/4 2-1/4 1/2 15 12-3/4 9-3/4 8-1/8 6-1/2
DHJ 5 9 7 21-3/4 4-1/2 3-3/4 2-3/4 1/2 15-1/2 12-3/4 9-3/4 9 7
DMH 3 9 6 20-3/4 4-1/2 3-3/4 2-1/4 1/2 15 12-3/4 9-3/4 8-1/8 6-1/2
DMJ 5 9 7 21-3/4 4-1/2 3-3/4 2-3/4 1/2 15-1/2 12-3/4 9-3/4 9 7
s4517ws (05/20/13)

Navigation menu