539789 2 Barnes SGV Grinder Pump Specifications
: Pump 539789 2 Barnes Sgv Grinder Pump Specifications 539789_2_Barnes SGV Grinder Pump Specifications pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Series SGVF & SGVH Recessed Vortex www.cranepumps.com Submersible Grinder Pumps I&O Manual Specifications: DISCHARGE ................................... 1¼” NPT, Vertical, Bolt-on Flange LIQUID TEMPERATURE 160°F (71°C)Intermittent VOLUTE ............................................ Cast Iron ASTM A-48, Class 30. MOTOR HOUSING ............................ Cast Iron ASTM A-48, Class 30. SEAL PLATE .................................... Cast Iron ASTM A-48, Class 30. IMPELLER: Design ...................... 12 Vane,Vortex, With Pump Out Vanes On Back Side. Dynamically Balanced, ISO G6.3. Material ..................... Cast Iron SHREDDING RING ........................... Hardened 440C Stainless Steel Rockwell® C-55. CUTTER ............................................ Hardened 440CStainless Steel, Rockwell® C-55. SHAFT .............................................. 416 Stainless Steel SQUARE RINGS ............................... Buna-N HARDWARE ...................................... 300 Series Stainless Steel PAINT ................................................ Air Dry Enamel. SEAL: Design ....................... Tandem Mechanical, Oil Filled Reservoir. Material ...................... Rotating Faces - Carbon Stationary Faces - Ceramic Elastomer - Buna-N Hardware -300 Series Stainless CORD ENTRY ................................... 30 ft. (9.1 m) Std. Cord. Custom Molded Quick Connect, for Sealing and Strain Relief CORD ................................................. CSA/UL Approved 12/4 Type SOW. UPPER BEARING: Design ....................... Single Row, Ball, Oil Lubricated Load .......................... Radial INTERMEDIATE BEARING: Design ....................... Single Row, Ball, Oil Lubricated Load .......................... Radial & Thrust LOWER BEARING: Design ....................... Sleeve, Oil Lubrication: Load ........................... Radial MOTOR: Design ....................... NEMA L-Single Phase, (SGVF2022L, SGVH2022L, SGVF2002L or SGVH2002L, includes overload protection in the motor). NEMA B-Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction Insulation ................ Class B. SINGLE PHASE ................................. Capacitor Start/Capacitor Run. Includes overload protection in the motor. Requires Barnes® Starter or Control Panel which Includes Capacitors, or Capacitor pack. THREE PHASE .................................. Dual Voltage 240/480; Requires Overload Protection to be Included in control panel. OPTIONAL EQUIPMENT................... Seal Material, Impeller Trims, Cord Length. Moisture Sensors, Moveable Fitting, Leg Kit P/N: 108339. RECOMMENDED: Accessories..................Break Away Fitting (BAF) Check Valve Control Panel Seal Kit PN ..................113299 Service Kit PN ..............115946 Series: SGVF & SGVH 2HP, 3450RPM, 60Hz High-Flow and High Head CSA 108 - File No. LR16567 UL 778 NRTL\C Models SGVF2002L and SGFH2002L are NOT UL or CSA listed Section 3 Page 8. Sample Specifications: Sample Specification DESCRIPTION: THE GRINDER PUMP IS DESIGNED TO REDUCE DOMESTIC, COMMERCIAL, INSTITUTIONAL AND LIGHT INDUSTRIAL SEWAGE TO A FINELY GROUND SLURRY. SECTION 3B 1 PAGE 3/11 DATE A Crane Co. Company USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598 Series SGVF & SGVH Recessed Vortex www.cranepumps.com Submersible Grinder Pumps I&O Manual inches (mm) MODEL NO PART NO HP VOLT PH/Hz RPM (Nom) NEMA START CODE SGVF2002L* 110614 2 200 1 / 60 3450 F 17.0 53.0 SGVF2022L 110609 2 240 1 / 60 3450 H 15.0 53.8 SGVF2062L 110610 2 200 3 / 60 3450 J 11.0 42.0 SGVF2032L 110611 2 240 3 / 60 3450 J 9.0 SGVF2042L 110612 2 480 3 / 60 3450 J 4.0 SGVF2052L 110613 2 600 3 / 60 3450 J SGVH2002L* 110620 2 200 1 / 60 3450 SGVH2022L 110615 2 240 1 / 60 SGVH2062L 110616 2 200 3 / 60 SGVH2032L 110617 2 240 SGVH2042L 110618 2 SGVH2052L 110619 2 FULL LOAD AMPS LOCKED ROTOR AMPS CORD SIZE CORD TYPE CORD O.D. ± .02 (.5) in (mm) 12/4 SOW .67 (17) 12/4 SOW. .67 (17) 12/4 SOW .67 (17) 36.0 12/4 SOW .67 (17) 18.0 12/4 SOW .67 (17) 3.2 14.4 12/4 SOW .67 (17) F 17.0 53.0 12/4 SOW .67 (17) 3450 H 15.0 53.8 12/4 SOW .67 (17) 3450 J 11.0 42.0 12/4 SOW .67 (17) 3 / 60 3450 J 9.0 36.0 12/4 SOW .67 (17) 480 3 / 60 3450 J 4.0 18.0 12/4 SOW .67 (17) 600 3 / 60 3450 J 3.2 14.4 12/4 SOW .67 (17) HIGH-FLOW HIGH-HEAD Optional - Temperature sensor cord for all models is 14/3 SOW, 0.55 (14mm) ± .02 (.51mm) O.D. (Not used on SGVF2022L, SGVH2022L, SGVF2002L or SGVH2002L). Optional - Moisture and Temperature sensor cord for all models is 18/5 SOW, 0.49 (12.4mm) ± .02 (.51mm) O.D., replaces Temperature sensor cord. (*) This pump is NOT UL or CSA listed IMPORTANT ! 1.) PUMP MAY BE OPERATED “DRY” FOR EXTENDED PERIODS WITHOUT DAMAGE TO MOTOR AND/OR SEALS. 2.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. SECTION 3B 2 PAGE 3/14 DATE A Crane Co. Company USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598 Series SGVF www.cranepumps.com I&O Manual Performance Curve 2HP, 3450RPM, 60Hz, High-Flow Submersible Grinder Pumps inches (mm) Testing is performed with water, specific gravity 1.0 @ 68º F @ (20ºC), other fluids may vary performance SECTION 3B 3 PAGE 7/09 DATE A Crane Co. Company USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598 Series SGVH Performance Curve 2HP, 3450RPM, 60Hz, High-Head Submersible Grinder Pumps www.cranepumps.com I&O Manual inches (mm) Testing is performed with water, specific gravity 1.0 @ 68º F @ (20ºC), other fluids may vary performance SECTION 3B 4 PAGE 11/03 DATE A Crane Co. Company USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2010:06:28 12:53:51-04:00 Modify Date : 2014:03:24 11:43:31-04:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 7.0.5 (Windows) Metadata Date : 2014:03:24 11:43:31-04:00 Format : application/pdf Title : untitled Document ID : uuid:47c676e9-458b-4aac-b187-e68e73751f93 Instance ID : uuid:be101ba6-322d-4684-985f-db61fc5037a7 Page Count : 4EXIF Metadata provided by EXIF.tools