542505 1 Barnes Fiberglass Lift Stations Brochure
542501 1 Barnes Fiberglass Lift Stations Brochure 542501_1_Barnes Fiberglass Lift Stations Brochure
: Pump 542505 1 Barnes Fiberglass Lift Stations Brochure 542505_1_Barnes Fiberglass Lift Stations Brochure pdf
Open the PDF directly: View PDF 
.
Page Count: 6
brands you trust.
FIBERGLASS
LIFT STATIONS
Pipe Rail Simplex/Duplex
Hard Piped Simplex
Robust pre-assembled
package with congurations
for every project’s needs.
FIBERGLASS LIFT STATIONS
Pipe Rail
Simplex
Station
Pipe Rail
Duplex
Station
(Hard Piped
Simplex Station
not shown)
Applications range from residential and commercial construction to replacing aged lift stations to housing
development. The CP&S online configurator tool and technical sales staff makes the configuration process
easy to select the right pump, control panel, basin and cover for each unique application.
Hard Piped and Pipe Rail configurations are available.
Fiberglass Lift Stations
Available in a variety of depths and diameters in
both simplex and duplex configurations.
Hard Piped
System
An economical
solution equipped
with a true union
ball valve for
shallow stations
where rail systems
are not required.
Pipe Rail Simplex/
Duplex System
Provides ease of
pump installation
and maintenance
using the quick
disconnect breakaway
fitting and stainless
steel guide rails.
BARNES Fiberglass Lift Stations
2
2016 Crane Pumps & Systems, Inc.
A Crane Co. Company
Printed in U.S.A.
FLSBRO - Rev. A (2/16)
Crane Pumps & Systems Canada
83 West Drive
Brampton, Ont. Canada L6T 2J6
(905) 457-6223
Fax (905) 457-2650
Crane Pumps & Systems
420 Third Street
Piqua, Ohio 45356
(937) 778-8947
Fax (937) 773-7157
www.cranepumps.com
A Crane Co. Company
brands you trust.
About Crane Pumps & Systems
Since 1946, Crane Pumps & Systems has been designing and manufacturing pumps,
accessories and systems to provide solutions for municipal water and wastewater,
residential, commercial, industrial and military pump market segments. Our trusted
brands include Barnes®, Burks®, Crown®, Deming®, Prosser® and Weinman®.
For more information visit:
Cranepumps.com
About Crane Co.
Crane Pumps & Systems is one of four strong business units that make up Crane Co.’s
Fluid Handling segment. Crane Co. is a diversied global manufacturer of engineered
industrial products traded on the New York Stock Exchange (NYSE: CR). One of its
segments, Crane Fluid Handling, provides highly engineered products for uid handling
applications worldwide.
For more information visit:
Craneco.com
Pump Options:
Barnes offers a wide variety of sewage ejectors, effluent and grinder pumps in a variety of sizes to ensure that an
optimal pump is selected for the specific application. Barnes pumps offer industrial materials of construction and
120 years of reliability from a brand you can trust.
Grinders: PGPH, SGV Series
Grinder pump series have a 1.25” or 2”
discharge and are best for domestic,
commercial, institutional and light
industrial sewage applications.
Sewage Ejectors: SE, SEV Series
Sewage Ejector pump series have a 2”
discharge and are best for raw sewage,
residential, wastewater and storm water
applications.
Effluent: STEP, EH, EHV Series
Effluent pump series have a 2” discharge
and are used for pumping effluent
spherical solids up to ¾” inch.
Sump: SE, EH, SEV, EHV Series
Sump pumps have a 2” discharge and
are typically used in elevator dewatering
and building dewatering sump
applications.
PGPH, PGPP Series
(single seal)
SGV Series
(double seal)
3, 5 & 7.5 hp
2 hp
STEP Series
SEV412 SeriesSE 511 and 521 Series EHV412EH Series
EHV412EH Series
2SEV SeriesSE Series
3
Cover Options
Solid Fiberglass
Reinforced Fiberglass Covers are grass green in col-
or. Covers for 24” and 30” diameters are 3/8” thick, 36”
diameters are 1/2” thick.
Steel
Steel cover available for pre-assembled
basin, 48” diameter is 3/8” thick with black
powder coating.
Aluminum Hatch
Available for basin diameters 36”
or 48” diameters and are 1/4” thick.
Control Panel Options
Control Panels are available in the simplex and duplex pre-assembled pipe rail designs
for SE/EH Series pumps up to 5HP and SGV pumps up to 7.5HP.
Standard
Single Phase (120V, 240V, 240V SGV w/Capacitors)
Three Phase (200/240V, 480V, 600V)
Double Seal with Moisture Detection (optional)
Single Phase (120V, 240V, 240V SGV w/Capacitors)
Three Phase (200/240V, 480V, 600V)
Listed by Underwriters Laboratories, simplex and
duplex pump control panels provide reliable pump
station operation and potential malfunction warning.
Standard Features:
• Simplex and Duplex Wall Mounted Series
• Non-metallic corrosian resistant NEMA 4x Enclosure
• Padlockable Latch
• Pump and Alarm Circuit Breakers
• IEC Rated Motor Contactor
• Pump Start Push Button
• Terminal Strip and Ground Lug for Incoming Connections
• Alarm Light and Audible Alarm with Silence
Online Configurator Tool:
CP&S Online Configurator Tool and technical sales staff make the
configuration process easy to select the right pump, control panel,
basin, and cover for each unique application.
Fiberglass
Steel Aluminum
4
Hard Piped Simplex System comes
pre-assembled with the following:
• Female NPT Bulkhead
Fitting
• True Union Isolation Valve
• Check Valve
Hard Piped Simplex Station
Pipe Rail Simplex/Duplex Station
Hard Piped Simplex System Specications
Pump Discharge x
Basin Discharge 1¼”x1¼” 2”x2” 3”x3”
Basin Diameters: 24”,30”,36” 30”,36” 36”
Basin Depths: 48”, 60” 48”, 60” 48”, 60”
Cover Options:
Solid
Fiberglass,
*Aluminum
Solid
Fiberglass,
*Aluminum
Solid
Fiberglass,
*Aluminum
**Pump Series
Options: PGPP, PGPH
SEV412, SE,
2SEV, EHV,
EH, STEP
3SE, 3SEV
** Only select models within each pump series are available in the
Hard Piped System. Consult CP&S Connect online configurator
or factory for exact listing of models.
Pipe Rail Simplex/Duplex Systems
come pre-assembled with the following:
• Schedule 80 PVC
• Isolation Valve
• Check Valve
• BAF (3” – CV Moveable
not available)
PIPE RAILS
& MOUNTING
HARDWARE
PIPING
BASIN
Stainless steel
Heavy duty
schedule 80 PVC
Filament wound
berglass basin for
extra strength
CHECK VALVE
Standard removable
check valve oers
ease of maintenance
WEIGHTS
PUMP
FLOATS
BRACKET
Stainless
steel oat
bracket
User adjustable
oat weights to
set levels
Industry trusted
Barnes Sewage
Ejectors, Grinders
and Euent
pumps available
with system
Environmentally
friendly mercury
free mechanical
oats
Pipe Rail Simplex System Specications
Pump Discharge x
Basin Discharge 1¼”x1¼” 2”x2” 3”x3”
Basin Diameters: 24”,30”,36” 30”,36” 36”
Basin Depths: 48”, 60”, 72”,
84”, 96”
48”, 60”, 72”,
84”, 96”
48”, 60”, 72”,
84”, 96”
Cover Options:
Solid
Fiberglass,
*Aluminum
Solid
Fiberglass,
*Aluminum
Solid
Fiberglass,
*Aluminum
Pump Series
Options:
PGPP, PGPH,
SGV
SEV412, SE,
2SEV, EHV,
EH, STEP
3SE, 3SEV
BASIN
Filament wound
berglass basin for
extra strength
CHECK VALVE
Standard removable
check valve oers
ease of maintenance
PUMP
FLOATS
Industry trusted
Barnes Sewage
Ejectors, Grinders
and Euent pumps
available with system
Environmentally
friendly mercury
free mechanical
oats
LIFTING ROPE
Heavy duty
polypropylene
rope with knots
for easy lifting
PIPING
Heavy duty
schedule 80 PVC
(PIPE RAIL DUPLEX SYSTEM NOT SHOWN)
• 3(Simplex) or 4(Duplex)
Control Floats Suspended
from Rack
• Corrosion Resistant
Pipe Rails
Pipe Rail Duplex System Specications
Pump Discharge x
Basin Discharge 1¼”x2” 2”x2” 3”x3”
Basin Diameters: 36” 48” 36” 48” 48”
Basin Depths: 48”, 60”, 72”, 84”, 96” 48”, 60”, 72”, 84”, 96” 60”, 72”,
84”, 96”
Cover Options:
Solid
Fiberglass,
Aluminum
Hatch
Aluminum,
or Steel
Hatch
Solid
Fiberglass,
Aluminum
Hatch
Aluminum,
or Steel
Hatch
Aluminum,
or Steel
Hatch
Pump Series
Options: PGPP, PGPH, SGV SEV412, SE, 2SEV,
EHV, EH, STEP 3SE, 3SEV
*Aluminum option only in 36” basin
• Piggyback / Direct
Control Floats Clamped
to Discharged Pipe
• Alarm Box
*Aluminum option only in 36” basin
LIFTING CHAIN
Stainless steel
5
