Zoeller Pump Company 548008 1 4292 Brochure
: Pump 548008 1 Zoeller 4292 Brochure 548008_1_Zoeller 4292 Brochure pdf
Open the PDF directly: View PDF 
.
Page Count: 3
290 Series
Features
The High Head Waste-Mate series of submersible pumps is designed for use in
residential or light commercial dewatering and wastewater applications and can
be used to transfer groundwater and effluent or raw sewage. The innovative
vortex impeller design reduces the risk of clogging and allows each pump to
pass 2" (50 mm) spherical solids. These durable cast iron pumps include a
powder coated epoxy finish to prevent corrosion and are designed to provide
great heat dissipation from the motor, ensuring a long service life. As with every
Zoeller® pump, each one is 100% pressure-tested, submerged and run to
ensure quality and reliability for years of trouble-free performance!
Automatic pumps include a float-operated, 2-pole mechanical switch, a
stainless steel float guard and switch arm, and a solid, buoyant polystyrene
float.
For nonautomatic pumps, variable level control systems and containers of
various sizes are available for longer cycles.
Double seal models are available to improve bearing lubrication and prevent
leaks and damage to seals or bearings during dry run conditions.
All models are hermetically sealed to be watertight, dust-tight, and completely
submersible.
Reserve Powered Design: For unusual conditions, a reserve safety factor is
engineered into the design of every pump.
Specifications
Motor Characteristics
Motor 1/2 - 2 HP
Voltage 115 - 575 V
Phase 1 or 3 Ph
Hertz 60 Hz
RPM 3450 RPM
Type Permanent split capacitor or 3 phase
Insulation Class B
Amps 2.4 - 20.5 Amps
Pump Characteristics
Operation Automatic or nonautomatic
Auto On/ Off Points 15-3/4" / 5" (40.0 cm / 12.7 cm)
Discharge Size 2" or 3" NPT
Solids Handling 2" (50 mm) spherical solids
Cord Length 20' (6 m) standard
Cord Type UL listed, 3-wire neoprene cord and plug
Max Head 75' (22.9 m)
Max Flow Rate 214 GPM (810 LPM)
Max Operating Temp 130 °F (54 °C)
Cooling Oil filled
Motor Protection Auto reset thermal overload (1 Ph)
Materials Characteristics
Cap Cast iron
Motor Housing Cast iron
Pump Housing Cast iron
Base Cast iron
Upper Bearing Ball bearing
Lower Bearing Ball bearing
Mechanical Seals Carbon and ceramic
Impeller Type Non-clogging vortex
Impeller Cast iron, optional bronze
Hardware Stainless steel
Motor Shaft 1117 carbon steel or 416 stainless steel*
Gasket Neoprene square ring and gasket
FM0450_Ea
Updated 0616
Model
Model Number Seal Mode Volts Phase Amps HP Hz Lbs Kg
M292 Single Auto 115 1 15.0 1/2 60 86 39
N292/N4292 Single / Dbl Non 115 1 15.0 1/2 60 85/93 38/42
BN292 Single Auto 115 1 15.0 1/2 60 87 39
D292 Single Auto 230 1 7.5 1/2 60 88 39
E292/E4292 Single/Dbl Non 230 1 7.5 1/2 60 88/95 39/43
F292/F4292 Single/Double Non 230 3 5.2 1/2 60 88/95 39/43
J292/J4292 Single/Double Non 200 3 6.4 1/2 60 88/95 39/43
G292/G4292 Single/Double Non 460 3 2.9 1/2 60 88/95 39/43
BA292/BA4292 Single / Dbl Non 575 3 2.4 1/2 60 88/95 39/43
D293 Single Auto 230 1 10.2 1 60 86 39
E293/E4293 Single / Dbl Non 230 1 10.2 1 60 86/94 39/42
H293 Single Auto 200 1 12.0 1 60 90 40
I293/I4293 Single / Dbl Non 200 1 12.0 1 60 89/96 40/43
F293/F4293 Single / Dbl Non 230 3 7.6 1 60 89/96 40/43
J293/J4293 Single / Dbl Non 200 3 8.2 1 60 89/96 40/43
G293/G4293 Single / Dbl Non 460 3 4.0 1 60 89/96 40/43
BA293/BA4293 Single Non 575 3 3.3 1 60 89 40
BE293 Single Auto 230 1 10.2 1 60 88 40
D294 Single Auto 230 1 13.7 1-1/2 60 87 39
E294/E4294 Single / Dbl Non 230 1 13.7 1-1/2 60 86/94 39/42
H294 Single Auto 200 1 17.8 1-1/2 60 90 40
I294/I4294 Single / Dbl Non 200 1 17.8 1-1/2 60 89/96 40/43
F294/F4294 Single / Dbl Non 230 3 9.5 1-1/2 60 89/96 40/43
J294/J4294 Single / Dbl Non 200 3 10.8 1-1/2 60 89/96 40/43
G294/G4294 Single / Dbl Non 460 3 4.8 1-1/2 60 89/96 40/43
BA294/BA4294 Single/Double Non 575 3 3.8 1-1/2 60 89/96 40/44
BE294 Single Auto 230 1 13.7 1 1/2 60 88 40
D295 Single Auto 230 1 17.1 2 60 89 40
E295/E4295 Single / Dbl Non 230 1 17.1 2 60 88/97 39/43
WD295 Single Auto 230 1 17.1 2 60 88 39
H295 Single Auto 200 1 20.5 2 60 92 41
I295/I4295 Single / Dbl Non 200 1 20.5 2 60 91/99 41/44
290 Series
Your Peace of Mind is Our Top Priority®
3649 Cane Run Rd | Louisville, KY 40211 USA
+1 502-778-2731 | 1-800-928-7867 | Fax: +1 502-774-3624
www.zoeller.com
Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. Copyright Zoeller Company. All rights reserved.
Model Number Seal Mode Volts Phase Amps HP Hz Lbs Kg
F295/F4295 Single / Dbl Non 230 3 12.2 2 60 91/99 41/44
J295/J4295 Single / Dbl Non 200 3 14.3 2 60 91/99 41/44
G295/G4295 Single / Dbl Non 460 3 6.1 2 60 91/99 41/44
BA295/BA4295 Single Non 575 3 4.9 2 60 91 41
*Single seal models are built with a carbon steel motor shaft, and double seal models are built with a stainless steel motor shaft.
290 Series
Your Peace of Mind is Our Top Priority®
3649 Cane Run Rd | Louisville, KY 40211 USA
+1 502-778-2731 | 1-800-928-7867 | Fax: +1 502-774-3624
www.zoeller.com
Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. Copyright Zoeller Company. All rights reserved.
