548313 2 Berkeley Submersible Motor Controls Brochure

: Pump 548313 2 Berkeley Submersible Motor Controls Brochure 548313_2_Berkeley Submersible Motor Controls Brochure pdf

Open the PDF directly: View PDF .
Page Count: 48

Download
Open PDF In Browser	View PDF

PENTEK

®

ELECTRONICS CATALOG
Motors, Controls and Drives

w w w.PUMPS.com

Tested. Tough. Proven.
From the dawn of civilization, providing and

Pentek will continue to bring you new innovations

managing a dependable source of water has been

in motors and controls, because of our rich

essential to mankind's survival. Serving this most

heritage of expertise in water management

basic human need has driven the development of

systems. Pentek is the leading electronics brand

countless new technologies. In the 21st century,

of Pentair, North America's largest water pump

Pentek is at the forefront of developing new and

manufacturer. Pentair sets demanding standards

®

better electronic technology for water management. for pumps, motors and controls that are labWe start with the fact that our motors, controls
and other products have to be exceptionally

tested and field-tested, to prove they're tough
enough, before they ever ship to our customers.

tough. Submersible pumps live deep inside a

Pentek offers the exceptional technical support you

difficult environment, and only a tough motor with

expect from Pentair, and a level of advanced “tough

a hard-working, precision-engineered control

technology” unmatched in the industry. So, demand

system can meet the constant demand for water.

more, and put us to the test. Our vision is to prove,

Where technology must be tough, Pentek has

time and time again, we are your best choice.

been tested and trusted by our customers.

Table of Contents
4" submersible XE motors	

1/2 – 10 HP	

4

Materials of Construction, Dimensional Data		

5	

Features & Benefits		

6

Technical Data		

8,9

Coal Bed Methane		

10

4" Submersible Motor Adapter		

11

4" SINGLE-PHASE MOTOR ControlS	

12

1/2 – 5 HP	

Single-Phase Controls, CSIR, CSCR, VIP Pro		

12-15

pump protection		

16

Single-Phase Protectors		

16

SPP-111P & 231P	

1/3 – 1 HP	

17

SPP-111P-3RL, SPP-233P & 235P	

1/2 – 15 HP	

18

The Informer 		

19

6" submersible motors	

20

5 - 50 HP	

Features & Benefits		

20

Materials of Construction, Dimensional Data		

21

Hitachi Submersible Motors		

22

Hitachi Control Boxes		

23

Technical Data		

23

8"- 14" submersible motors	

24

®

7-1/2 – 300 HP	

Features & Benefits		

24

Materials of Construction, Dimensional Data, Technical Data		

25

THREE-PHASE STARTERS		

26

PPX NEMA Pump Panels		

26,27

DRIVE PRODUCTS		

28

Pentek Intellidrive 	

28-31

™

1/2 – 3 HP	

Pentek Intellidrive Accessories		

32-35

PPC3 & PPC5	

36,37

1/2 – 200 HP	

PPC Selection Guide		

38,39

ACCESSORIES		 40
Reactors & Filters		

40-42

Transducers, Leads & Repair Parts		

43

NOMENCLATURE APPENDIX		

40

4" submersible motors

4" Submersible Motors XE-SERIES
For high-thrust water well applications

1/2 − 5 HP, Single Phase, 2 & 3 Wire, 115V and 230V, 60 Hz
1/2 – 10 HP, Three Phase, 3 Wire, 200V, 230V, 460V and 575V, 60 Hz
Pentek offers a complete line of XE Series 4" Submersible
High-Thrust Motors. Built with the latest design,
manufacturing, and testing technology, they feature
laser-welded 304L stainless steel construction,
higher-thrust capacities and higher efficiencies.
®

4

4" submersible motors

XE-SERIES
Engineered EPOXY STATOR Design

Mounting Configuration

The Pentek XE Series submersible motors utilize
a 304L stainless steel “encapsulated, epoxy stator
design,” and professional-grade Class F insulation
providing longer life in harsh environments. Each
motor is 100% factory pressure and run tested to
support our high quality standards.
®

3.00”
(76.2)mm)

1.50”
(38.1mm)

14 Teeth 24/48 Pitch
30º Pressure Angle
Min. 0.50 Full Spline
ANSI B92.1 Compliant
0.6255”
0.6245”

Features

Sand
Boot

Pentek submersible motors are unique in providing the
industry with innovative and robust design features that
will extend the life of your installation:
	

0.91”

“L”

3.75”
(92.25mm)

 versized Kingsbury-type Thrust Bearing Design–
O
Large high-performance bearings are standard on
all HPs allowing for higher thrust loads, providing
many years of trouble-free service under
severe-duty operation

1.5”max

(4) 5/16-24
UNF-2A Threaded
Studs on 3” Dia. Circle

	2-Wire Permanent Split Capacitor Design insures
quiet operation and improved operating efficiency
	3-Wire Motors operate with Pentek SMC-CR,
VIP Pro and Pentek Intellidrive products
™

	

All Stainless Steel Exterior

	Professional-Grade Class F-Compliant Motor
Insulation – Allows for longer service life
	 100% Factory Pressure and Run Tested
	Automatic Thermal Protection on 2-wire designs
to 1-1/2 HP models and 3-wire designs to
1 HP single-phase
	All 115V and 230V motors are equipped with surge
arrestors to provide maximum protection against
lightning, transient and voltage surge conditions
Technical data can be found on page 8

Materials of Construction
PARTS	MATERIALS
End Bell	
304L cast stainless steel, rounded bottom
Shell	
304L stainless steel, laser-welded to end bells
Motor Shaft	
17-4 precipitation hardened SS
Insulation	
Class F, 311°F (155°C)
Max. Water Temp.	
86°F (30°C)
Fasteners	
304-grade stainless steel
Lip Seal	
Nitrile
Sand Boot	
Nitrile
Cable	
Field-serviceable, controlled compression design
	
UL, CSA, NSF approved
Cable Length	
48" - 1/2 HP to 1-1/2 HP; 100" - 2 HP and above
Diaphragm	EPDM
Thrust Bearings	
Kingsbury-type, pivot shoe, carbon graphite
	
mating ring
Thrust Load Capacity	
Varies by rating. See table on page 8
Consult Pentek Electronics Manual for high-temperature applications

PENTEK Customer Hotline: 1-866-9PENTEK

P 8111 WS

5

4" submersible motors

4" Submersible Motors XE-SERIES
Innovations focused on dependable performance

Capacitor
	Patented encapsulated toroidal capacitor on
2-wire motor design provides smoother, noise-free
operation without the need for a control box
	Lower starting current with both main and start 	
windings engaged at all times

Motor End Bells & Shell

	Upper & lower 304L stainless steel (SS) end bells
are designed for 100% corrosion-resistance and
durability
	Rounded bottom on lower end bell reduces well
casing interference
	Upper 304L SS end bell is designed with internal
cord entry feature
	Motor shell is constructed of 304L SS tubing, with a
laser-etched nameplate and warning label

Motor Leads
	Replaceable lead is held in place by 2 screws
for controlled compression
	Each lead is tested twice to 250 PSI
	UL, CSA, NSF approved

Kingsbury-type Thrust Bearings
	Large high-performance bearings are standard
on all HPs, allowing higher thrust loads, for many
years of trouble-free service under severe-duty
operation
	Stainless steel pivot shoe is securely positioned
over the carbon graphite disk for even load
disbursement

6

PENTEK Customer Hotline: 1-866-9PENTEK

4" submersible motors

XE-SERIES
Class F Insulation
	Professional-grade Class F-compliant motor
insulation allows for longer service life and
more reliable motor operation

Surge Arrestors
	Surge arrestors are mounted
within the upper end bell
	Design provides each conductor
circuit with its own surge arrestor
	Designed to optimize clamping voltage,
energy absorption/dissipation and
response time

Drive Shaft
	17-4 precipitation hardened
stainless steel shaft with precision
finished bearing surfaces
	NEMA standard mounting and shaft height

Sand Slinger
	Provides ultimate protection
against sand and grit intrusion
	Stamped stainless steel
upper cover is designed to
prevent sand entry

PENTEK Customer Hotline: 1-866-9PENTEK

7

4" submersible motors

4" Submersible Motors

For high-thrust water well applications — 1/2 - 10 HP, single- and three-phase
XE SERIES PERFORMANCE
RATING

Winding

MOTOR
TYPE

CataLog
Number

HP

KW

Volts

HZ

Service
Factor

PSC
2-Wire

P42B0005A1
P42B0005A2
P42B0007A2
P42B0010A2
P42B0015A2
P42B0005A1-01
P42B0005A2-01
P42B0007A2-01
P42B0010A2-01
P42B0015A2-01

1/2
1/2
3/4
1
1 1/2
1/2
1/2
3/4
1
1 1/2

0.37
0.37
0.55
0.75
1.1
0.37
0.37
0.55
0.75
1.1

115
230
230
230
230
115
230
230
230
230

60
60
60
60
60
60
60
60
60
60

1.6
1.6
1.5
1.4
1.3
1.6
1.6
1.5
1.4
1.3

CSIR
3-Wire

CSCR
3-Wire

Full Load Max. Load (SF
Main
AMPS
Load) AMPS Resistance
7.4
3.7
5.0
7.9
9.2
7.9
4.0
5.0
6.7
9.0

9.5
4.7
6.4
9.1
11.0
9.8
4.7
6.2
8.1
10.4

Y/B/R

Y/B/R

Start
Resistance

Locked
Rotor
Amps

LENGTH

WEIGHT

IN

MM

LB

KG

36.4
19.5
24.8
21.7
42.0
28
16
18
24
44

11.0
11.0
12.4
13.3
14.9
10.5
10.5
11.9
12.5
14.2

279
279
314
337
378
267
267
302
318
361

19.2
19.2
22.7
24.5
28.9
18.1
18.1
21.4
23.2
27.3

8.7
8.7
10.3
11.1
13.1
8.2
8.2
9.7
10.5
12.4

1.3-1.8
4.5-5.2
3.0-4.8
4.2-5.2
1.9-2.3
1.4-2.0
6.1-7.2
5.9-6.9
4.2-5.2
1.8-2.4

P43B0005A1

1/2

0.37

115

60

1.6

11.0/11.0/0

12.6/12.6/0

0.9-1.6

5.7-7.0

49.6

10.0

253

18.9

8.6

P43B0005A2

1/2

0.37

230

60

1.6

5.5/5.5/0

6.3/6.3/0

4.2-4.9

17.4-18.7

22.3

9.7

246

18.1

8.2

P43B0007A2

3/4

0.55

230

60

1.5

7.2/7.2/0

8.3/8.3/0

2.6-3.6

11.8-13.0

32.0

10.8

275

21.4

9.7

P43B0010A2

1

0.75

230

60

1.4

8.4/8.4/0

9.7/9.7/0

2.2-3.2

11.3-12.3

41.2

11.7

297

23.1

10.5

P43B0005A1-01

1/2

0.37

115

60

1.6

8.8/8.8/0

10.9/10.9/0

1.0-1.4

2.5-3.1

44

9.6

244

17.9

8.1

P43B0005A2-01

1/2

0.37

230

60

1.6

5.3/5.3/0

6.1/6.1/0

5.1-6.1

12.4-13.7

21

9.2

234

16.7

7.6

P43B0007A2-01

3/4

0.55

230

60

1.5

6.6/6.6/0

7.8/7.8/0

2.6-3.3

10.4-11.7

32

10.3

262

19.8

9.0

P43B0010A2-01

1

0.75

230

60

1.4

8.1/8.1/0

9.4/9.4/0

2.0-2.6

9.3-10.4

41

11.2

284

22.0

10.0

P43B0005A2

1/2

0.37

230

60

1.6

4.1/4.1/2.2

4.9/4.4/2.1

4.2-4.9

17.4-18.7

22.3

9.7

246

18.1

8.2

P43B0007A2

3/4

0.55

230

60

1.5

5.1/5.0/3.2

6.3/5.6/3.1

2.6-3.6

11.8-13.0

32.0

10.8

275

21.4

9.7

P43B0010A2

1

0.75

230

60

1.4

6.1/5.7/3.3

7.2/6.3/3.3

2.2-3.2

11.3-12.3

41.2

11.7

297

23.1

10.5

P43B0015A2

1 1/2

1.1

230

60

1.3

9.7/9.5/1.4

11.1/11.0/1.3

1.6-2.3

7.9-8.7

47.8

13.6

345

27.4

12.4

P43B0020A2

2

1.5

230

60

1.25

9.9/9.1/2.6

12.2/11.7/2.6

1.6-2.2

10.8-12.0

49.4

15.1

383

31.0

14.1

P43B0030A2

3

2.2

230

60

1.15

14.3/12.0/5.7

16.5/13.9/5.6

1.1-1.4

2.0-2.5

76.4

18.3

466

40.0

18.1

P43B0050A2

5

3.7

230

60

1.15

24/19.1/10.2

27.0/22.0/10.0

0.62-0.76

1.36-1.66

101.0

27.7

703

70.0

31.8

P43B0005A2-01

1/2

0.37

230

60

1.6

4.2/4.1/1.8

4.8/4.3/1.8

5.1-6.1

12.4-13.7

21

9.2

234

16.7

7.6

P43B0007A2-01

3/4

0.55

230

60

1.5

4.8/4.4/2.5

6.0/4.9/2.3

2.6-3.3

10.4-11.7

32

10.3

262

19.8

9.0

P43B0010A2-01

1

0.75

230

60

1.4

6.1/5.2/2.7

7.3/5.8/2.6

2.0-2.6

9.3-10.4

41

11.2

284

22.0

10.0

P43B0015A2-01

1 1/2

1.1

230

60

1.3

9.1/8.2/1.2

10.9/9.4/1.1

2.1-2.5

10.0-10.8

49

12.8

325

26.0

11.8

THRUST
RATING

700

900
1500

COALBED methane - XE SERIES PERFORMANCE
Rating

8

Motor
Type

Catalog
Number

HP

kW

Volts

Hz

Service
Factor

CSCR
3-Wire

P43S0020A2
P43S0030A2
P43S0050A2

2
3
5

1.5
2.2
3.7

230
230
230

60
60
60

1.25
1.15
1.15

Full
Load
Amps
(y/B/R)

Max. Load
(SF Load)
Amps
(y/B/R)

9.9/2.6/9.1 12.2/2.6/11.7
14.3/5.7/12.0 16.5/5.6/13.9
24/10.2/19.1 27/10.0/22.0

Winding
Main
Resistance

Start
Resistance

Locked
Rotor
Amps

IN.

MM

LB

KG

1.6-2.2
1.1-1.4
0.62-0.76

10.8-12.0
2.0-2.5
1.36-1.66

49.4
76.4
101.0

19.3
22.3
28.6

491
567
726

47.0
53.0
74.0

21.3
24.0
33.6

LENGTH

WEIGHT

Thrust
Rating
900
1500

PENTEK Customer Hotline: 1-866-9PENTEK

4" submersible motors

XE-SERIES
XE SERIES PERFORMANCE
Rating
Motor
Type

Catalog
Number

HP

KW

Volts

HZ

3-Phase

P43B0005A8
P43B0005A3
P43B0005A4
P43B0007A8
P43B0007A3
P43B0007A4
P43B0010A8
P43B0010A3
P43B0010A4
P43B0015A8
P43B0015A3
P43B0015A4
P43B0015A5
P43B0020A8
P43B0020A3
P43B0020A4
P43B0020A5
P43B0030A8
P43B0030A3
P43B0030A4
P43B0030A5
P43B0050A8
P43B0050A3
P43B0050A4
P43B0050A5
P43B0075A8
P43B0075A3
P43B0075A4
P43B0075A5
P43B0100A4

1/2
1/2
1/2
3/4
3/4
3/4
1
1
1
1 1/2
1 1/2
1 1/2
1 1/2
2
2
2
2
3
3
3
3
5
5
5
5
7 1/2
7 1/2
7 1/2
7 1/2
10

0.37
0.37
0.37
0.55
0.55
0.55
0.75
0.75
0.75
1.1
1.1
1.1
1.1
1.5
1.5
1.5
1.5
2.2
2.2
2.2
2.2
3.7
3.7
3.7
3.7
5.6
5.6
5.6
5.6
7.5

200
230
460
200
230
460
200
230
460
200
230
460
575
200
230
460
575
200
230
460
575
200
230
460
575
200
230
460
575
460

60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60

Max. Load
Line to
Service Full Load (SF Load) Line Resistance
Factor
Amps
Amps
Ohms
1.6
1.6
1.6
1.5
1.5
1.5
1.4
1.4
1.4
1.3
1.3
1.3
1.3
1.25
1.25
1.25
1.25
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15

2.9
2.4
1.3
3.8
3.3
1.7
4.6
4.0
2.2
6.3
5.2
2.8
2
7.5
6.5
3.3
2.7
10.9
9.2
4.8
3.7
18.3
15.7
7.6
7.0
27.0
24.0
12.2
9.1
15.6

3.4
2.9
1.5
4.5
3.9
2.0
5.5
4.7
2.5
7.2
6.1
3.2
2.4
8.8
7.6
3.8
3.3
12.0
10.1
5.3
4.1
20.2
17.5
8.5
7.6
30.0
26.4
13.5
10.0
17.2

4.1-5.2
5.72-7.2
23.6-26.1
2.6-3.0
3.3-4.3
14.4-16.2
3.4-3.9
4.1-5.1
17.8-18.8
1.9-2.5
2.8-3.4
12.3-13.1
19.8-20.6
1.4-2.0
1.8-2.4
8.00-8.67
9.4-9.7
0.9-1.3
1.3-1.7
5.9-6.5
9.4-9.7
0.4-0.8
0.85-1.25
3.58-4.00
3.6-4.2
0.5-0.6
0.55-0.85
1.9-2.3
3.6-4.2
1.8-2.2

Locked
Rotor
Amps

In

MM

LB

KG

22
17.3
9
32.0
27
14
29.0
26.1
13.0
40.0
32.4
16.3
11.5
51.0
44.0
23.0
21.4
71.0
58.9
30.0
21.4
113.0
93.0
48.0
55.0
165.0
140.0
87.0
55.0
110.0

10
10
10
10.8
10.8
10.8
11.7
11.7
11.7
11.7
11.7
11.7
11.7
13.8
13.8
13.8
15.3
15.3
15.3
15.3
15.3
21.7
21.7
21.7
27.7
27.7
27.7
27.7
27.7
30.7

254
254
254
274
274
274
297
297
297
297
297
297
297
351
351
351
389
389
389
389
389
551
551
551
703
703
703
703
703
780

18.9
18.9
18.9
21.4
21.4
21.4
23.1
23.1
23.1
23.1
23.1
23.1
23.1
27.4
27.4
27.4
32
32
32
32
32
55
55
55
70
70
70
70
70
78

8.6
8.6
8.6
9.7
9.7
9.7
10.5
10.5
10.5
10.5
10.5
10.5
10.5
12.4
12.4
12.4
14.5
14.5
14.5
14.5
14.5
24.9
24.9
24.9
31.8
31.8
31.8
31.8
31.8
35.4

Length

Weight

Thrust
Rating

700

900

1500

COALBED methane - XE SERIES PERFORMANCE
Rating
Motor Type

3-Phase

Line to
Full Load Max. Load (SF Line Resistance
Amps
Load) Amps
Ohms

Locked
Rotor
Amps

In

MM

LB

KG Thrust Rating

1.3-1.7

58.9

19.3

491

47

21.3

5.9-6.5

30.0

19.3

491

47

21.3

17.5

.85-1.25

93.0

22.6

573

59

26.8

8.5

3.58-4.00

48.0

22.6

573

59

26.8

24.0

26.4

0.55-0.85

140.0

28.6

726

74

33.6

1.15

12.2

13.5

1.9-2.3

87

28.6

726

74

33.6

1.15

15.6

17.2

1.8-2.2

110

31.6

802

80

36.3

Catalog
Number

HP

KW

Volts

HZ

Service
Factor

P43S0030A3

3

2.2

230

60

1.15

9.2

10.1

P43S0030A4

3

2.2

460

60

1.15

4.8

5.3

P43S0050A3

5

3.7

230

60

1.15

15.7

P43S0050A4

5

3.7

460

60

1.15

7.6

P43S0075A3

7 1/2

5.6

230

60

1.15

P43S0075A4

7 1/2

5.6

460

60

P43S0100A4

10

7.5

460

60º

PENTEK Customer Hotline: 1-866-9PENTEK

Length

Weight

900

1500

P 8148 WS

9

4" submersible motors

4" Submersible Motors
Innovations focused on dependable performance

PENTEK XE-SERIES
®

4” Submersible Motors
The quality of the water-filled Pentek XE Series 4” submersible
motors has been proven through years of operation in the field.
The new Series features water-filled motors
which are built for reliability in potentially contaminated
(sand or coal fines) well installations.
®

The Pentek XE Series gives you 40 different choices,
including the new coal Bed lineup:
	 230-Volt Single-Phase 2 to 5 HP
	 230-Volt Three-Phase 3 to 7.5 HP
	 460-Volt Three-Phase 3 to 10 HP
Pentek Severe Duty Series Motors are rated for
continuous duty in 86˚ F water, and feature a silicon carbide
mechanical seal and diaphragm filter to help prevent sand/debris entry.

Motor Dimensions

1.51
1.508
1.498

14 teeth 24/48 pitch
30˚ pressure angle
Min .50” full spline
Class A sliding fit
ANSI B92.1 compliant

DESCRIPTION
HP
2
3
3
3
5
5
5
7.5
7.5
10

PHASE VoltAGE
1
3
1
3

230
230
230
460
230
230
460
230
460
460

“LM”
In. (mm)

WEIGHT
(LBS.)

19.32 (490,7)
22.32 (566,9)
19.32 (490,7)
19.32 (490,7)
28.57 (725,7)
22.57 (573,3)
22.57 (573,3)
28.57 (725,7)
28.57 (725,7)
31.57 (801,9)

47
53
47
47
74
59
59
74
74
80

(4) .97
.79

3.76

LM

Materials of Construction
PARTS

MATERIALS

Upper bearing housing

304L SS

Lower bearing housing

Cast iron

Shell

304L SS

Stator ends

304L SS

Shaft

17-4SS

Seal cover

Sintered bronze

Seal

SiC/SiC mech seal

Diaphragm

Nitrile rubber

Slinger

Nitrile butadyne rubber

Lead wire (or cable)

XLPE

Lead potting

Epoxy

Lead screws/clamp

316 SS

Filter

Polyethylene

Specifications subject to change without notice.

10

PENTEK Customer Hotline: 1-866-9PENTEK

4" submersible motors

4" Submersible Motor Adapter
For high-thrust water well applications

The PKG 4 x 6, Pump/Motor Adapter
allows you to use a 6" motor to power
your 4" submersible pump.

Applications
Water Systems... For residential, industrial,
commercial, multiple housing and farm use.

Specifications
	All Stainless Steel Construction – adapter
casting, coupling, intake screen, beveled
wire forms, socket head cap-screws, studs,
and fasteners

Features
	Extends Single-Phase Power Availability
to 4" submersible pumps through 10 HP
using 6" single-phase motors
	Easy Assembly – Easy jobsite assembly
	Double-Suction Screens – Reduces inlet
suction velocity, reducing the amount of
suspended solids ingested by pump

Patent #6, 398,521 B1

PENTEK Customer Hotline: 1-866-9PENTEK

CATALOG
NUMBER

PUMP
END

MOTOR

MAXIMUM
HP

WEIGHT
LBS.

PKG 4X6

4" NEMA

6" NEMA

10

5

* The PKG 4 x 6, Pump/Motor Adapter Is Sold Separately

11

4" single-phase control boxes

Submersible Motor Controls
Standard controls for single-phase 3-wire submersible motors
1/2 - 5 HP, Single-Phase Controls, 50/60 Hz
For Hitachi Submersible Motors see pages 22-25.
®

Pentek offers a full range of 1/2 - 5 HP models
that are interchangeable with existing motor
controls for Capacitor Start/Induction Run
(CSIR) and Capacitor Start/Capacitor Run
(CSCR) applications. Pentek is the professional
choice in harsh and high temperature
installations.
®

C

Applications
Water systems…for residential, multiple housing, farm
and commercial installations, where a submersible
3-wire motor is used.

Design Features
Enclosure
	Rugged NEMA 3R Enclosure – suitable for indoor/
outdoor use
	 Multiple-Size Electrical Knockouts
	 Rated for 50°C (122°F)

Internals
	 High-Load Voltage Relay
	 Heavy-Duty Contacts
	 External Access to Overload Reset – 1.5HP - 5HP
	Heavy-Duty Terminal Connectors –
suitable for up to #4 AWG wire
	

	 Industry Standard Wiring Connections –
easy-to-read wiring diagrams
	 Overload Protection Built-in (50 Hz models)

Agency Approvals
	 CSA CUS Certified

A
C

B

Pentek Submersible Motor Controls can be used with
Pentek XE Series and other 4" single-phase motors.

US

Hitachi is a registered trademark of Hitachi Industrial Equipment Systems Co., Ltd.
®

12

PENTEK Customer Hotline: 1-866-9PENTEK

4" single-phase control boxes

SIZE A

SIZE B

4.9

2.8

SIZE C

3.0

5.50

2.00

7.75

1.88

14.50

8.5

16.25

6.35

8.50

10.25

5.50

1.0

1.50

6.25
7.75

5.50

1.20

2.70

5.50

1.0

1.13

1.13

1.18

CSIR – Capacitor Start/Induction Run
ENCLOSURE
SIZE

60 HZ
CATALOG NO.

50 HZ
CATALOG NO.

1.8

A

SMC-IR0511 (-6pk)*

-

4

1.8

A

SMC-IR0521 (-6pk)*

-

4

1.8

A

SMC-IR0721 (-6pk)*

-

4

1.8

A

SMC-IR1021 (-6pk)*

-

WEIGHT
LBS.
KG

HP

KW

PHASE

VOLTS

1/2

0.37

1

115

4

1/2

0.37

1

230

3/4

0.55

1

230

1

0.75

1

230

CSCR – Capacitor Start/Capacitor Run
ENCLOSURE
SIZE

60 HZ
CATALOG NO.

50 HZ
CATALOG NO.

2.3

A

SMC-CR0521 (-6pk)*

-

5

2.3

A

SMC-CR0721 (-6pk)*

SMC5-CR0721

5

2.3

A

SMC-CR1021 (-6pk)*

SMC5-CR1021

230

7

3.2

B

SMC-CR1521

SMC5-CR1521

230

7

3.2

B

SMC-CR2021

SMC5-CR2021

1

230

7

3.2

B

SMC-CR3021

SMC5-CR3021

1

230

8

3.6

B

SMC-CR5021

SMC5-CR5021

ENCLOSURE
SIZE

60 HZ
CATALOG NO.

50 HZ
CATALOG NO.

WEIGHT
LBS.
KG

HP

KW

PHASE

VOLTS

1/2

0.37

1

230

5

3/4

0.55

1

230

1

0.75

1

230

1-1/2

1.1

1

2

1.5

1

3

2.2

5

3.7

CSCR PLUS – Capacitor Start/Capacitor Run PLUS Magnetic Contactor
WEIGHT
LBS.
KG

HP

KW

PHASE

VOLTS

2

1.5

1

230

7

3.2

B

SMC-CRP2021

SMC5-CRP2021

3

2.2

1

230

8

3.6

B

SMC-CRP3021

SMC5-CRP3021

5

3.7

1

230

12

5.4

C

SMC-CRP5021

-

* Submersible Motor Controls are available in single and six packs. Include the suffix ‘-6pk’ after the PN if 6 packs are required.

PENTEK Customer Hotline: 1-866-9PENTEK

P 8114 WS

13

4" SINGLE-phase control boxes

VIP Pro Controls
Capacitor start, capacitor run —
designed for the full range of single-phase

8
4
1

1/2, 3/4, 1, 1-1/2, 2, 3 and 5 HP, 3-wire submersible motors

Applications
Water systems…for residential, multiple housing,
farm and commercial installations, where a 4"
submersible 3-wire motor is used.

Design Features
Enclosure

11 	Weather resistant construction –
22 	
	

2
5
6

NEMA 3R/IP24 rated enclosure for
indoor/outdoor use
Control box rated for 50°C (122°F)
ambient temperature

33 	One screw removal for easy panel
access with motor running

44 	Pentek

proprietary dielectric control
panel board, UL and CSA Certified
®

7

Internals

55	

Universal controls­‑designed to
work on most manufacturers
3-wire submersible motors

66 	
	
	

Large wiring area offers generous
space to make your wiring connections.
Incorporates 1/2”, 3/4” and 1” conduit knock-outs

	

Control box is functional with the cover removed,
offering easier in-the-field troubleshooting

	
	

77 	
88 	

3

Made in USA, 330 Volt Start Capacitor

Agency Approvals
CSA CUS Certified

14

PENTEK Customer Hotline: 1-866-9PENTEK

LINE 1

LINE 2

YELLOW

RED

4" SINGLE-phase control boxes

PANEL BOARD ASSEMBL

SIZE A

THE COMPONENT, PART, OR ASSEMBLY DESCRIBED IN THIS DOCUMENT MUST COMPLY WITH THE FOLLOWING EU (EUROPEAN UNION) DIRECTIVE, INCLUDING
.25% MAXIMUM LEAD LEVEL FOR ALL COPPER ALLOYS. ROHS DIRECTIVE 2002.95 EC RESTRICTS THE USE OF LEAD, CADMIUM, MERCURY, CHROMIUM, TBT’S
AND OTHER HAZARDOUS MATERIALS. SEE THE TERMS AND CONDITIONS OF THE CONTRACT (PURCHASE ORDER) FOR MORE INFORMATION.

PANEL BOARD ASSEMBLY, BOD

8.31

4.00

(RUN)

LINE 1

LINE 2

YELLO

BOTTOM VIEW
LINE 1
NOTES:

LINE 2

YELLOW

RED

PANEL BOARD

BLACK

PANEL BOARD ASSEMBLY

1. ASSEMBLED 230 VOLT UNITS TO BE HI-POT TESTED AT 1750 VOLTS
FOR 1 SECOND. UNIT LEAD CURRENT NOT TO EXCEED 5mA.
ASSEMBLED 115 VOLT UNITS TO BE HI-POT TESTED AT 1500 VOLTS
FOR 1 SECOND. UNIT LEAD CURRENT NOT TO EXCEED 5mA.
2. TOLERANCE FOR ALL LABELS:
ANGULAR ±3º
LINEAR ± .05 [1.3]

6.81

INSIDE COVER
FRONT VIEW

BOX ASSEMBLY WITH COVER REMOVED

SIZE B

PANEL BOARD ASSEMBLY, BOTTOM VIEW

PANEL BOARD ASSEM

THE COMPONENT, PART, OR ASSEMBLY DESCRIBED IN THIS DOCUMENT MUST COMPLY WITH THE FOLLOWING EU (EUROPEAN U
.25% MAXIMUM LEAD LEVEL FOR ALL COPPER ALLOYS. ROHS DIRECTIVE 2002.95 EC RESTRICTS THE USE OF LEAD, CADMIUM, M
AND OTHER HAZARDOUS MATERIALS. SEE THE TERMS AND CONDITIONS OF THE CONTRACT (PURCHASE ORDER) FOR MORE INF

(START)

4.25

(RUN)

BOTTOM VIEW

11.19

(
NOTES:

1. ASSEMBLED 230 VOLT UNITS TO BE HI-POT TESTED AT 1750 VOLTS
FOR 1 SECOND. UNIT LEAD CURRENT NOT TO EXCEED 5mA.
ASSEMBLED 115 VOLT UNITS TO BE HI-POT TESTED AT 1500 VOLTS
FOR 1 SECOND. UNIT LEAD CURRENT NOT TO EXCEED 5mA.

ADDED "0" TO ALL BALLONS)

B

All drawings and specifications as well
as processes, materials, compounds
and other similar criteria are to be strictly
adhered to. No modifications allowed
without prior written approval.

BOTTOM VIEW

CRITICAL FEATURES ARE CIRCLED

2. TOLERANCE FOR ALL LABELS:
ANGULAR ±3º
LINEAR ± .05 [1.3]

LINE 1

NOTES:

LINE 2

YELLOW

RED

BLACK

1. ASSEMBLED UNIT TO BE HI-POT TESTED AT 1750 VOLTS FOR 1 SECOND.
UNIT LEAK CURRENT NOT TO EXCEED
5mA.
PANEL
FRONT
VIEW BOARD ASSEMBLY

B

500000048365

A

500000045918

REV.
LETTER

CHANGE
ORDER
No.

RCC
9/20/2013
RC
4/15/2013

DESIGNED IN INCHES
[XXX] DIMENSIONS IN mm

CONFIDENTIAL contains trade secrets and
other proprietary information of Pentair
Water. Duplication, disclosure or use are
forbidden without the written consent of
Pentair Water.

DO NOT SCALE DRAWING
TOLERANCE EXCEPT AS NOTED

[X.]
.X
[.X]
.XX
[.XX]
.XXX

.030

[.76]

.015

[.38]

.005

[.13]

125
ANGULAR

DR.

C

RC

CH.

HERRING
HENNIG

[3.2]

DATE:

½

4/15/2013

THIRD ANGLE PROJECTION

SCALE:

DATE

DL P

1:1

2. TOLERANCE FOR ALL LABELS:
ANGULAR ±3º
LINEAR ±.05 [1.3]

8.19

W

AP.

FRONT V

10/1/2013 1:28:38 PM -

INSIDE COV

BOX ASSEMBLY WITH COVER REMOVED
PANEL BOARD ASSEMBLY, BOTTOME VIEW

VIP Control Box Specification
Weight

Catalog
Number

Enclosure
Phase Volts Hertz Type lbs kg
Size

HP

kW

VIP4C02

0.50

0.37

1

230

60

CSCR

4.6

2.1

VIP4D02

0.75

0.55

1

230

60

CSCR

4.4

VIP4E02

1.00

0.75

1

230

60

CSCR

4.4

VIP4F02

1.50

1.1

1

230

60

CSCR

4.6

1.5

1

BOTTOM VIEW

230

60

CSCR

Start Capacitor

Run Capacitor

PN

Rating

PN

Rating

Voltage
Relay

Protector

A

U17-1422

43MFD-270V-15kΩ

U17-1419

15MFD-370V

U17-1592

None

2.0

A

U17-1423

59MFD-270V-15kΩ

U17-1292

15MFD-370V

U17-1592

None

2.0

A

U17-1424

86MFD-270V-15kΩ

U17-1292

23MFD-370V

U17-1592

None

2.1

A

U17-1430

105MFD-330V-15kΩ

U17-1438

10MFD-370V

= RENUMBERED
ALL BALLONS.
U17-1592
CGP69JB-7
B

All drawings and specifications as well
as processes, materials, compounds
and other similar criteria are to be strictly
adhered to. No modifications allowed
without prior written approval.

DESIGNED IN INCHES
[XXX] DIMENSIONS IN mm

VIP4G02

2.00

4.6

2.1

A

U17-1430

105MFD-330V-15kΩ

U17-1440

10MFD-370V

U17-1592

CET38EB-7

VIP4H02

3.00
2.2 UNIT TO BE
1 HI-POT TESTED
230 AT 175060VOLTS FOR
CSCR
5.4
1. ASSEMBLED
1 SECOND.

2.4

A

U17-1428

208MFD-330V-15kΩ

U17-1443

45MFD-370V

U17-1592

CGT66DD-07

.030

[.76]

.015

[.38]

VIP4J02

5.00
3.7 FOR ALL 1LABELS: 230
2. TOLERANCE

3.7

B

U17-1437

270MFD-330V-15kΩ

U17-1442

2 pcs-40MFD-370V

U17-1592

BET00EE-21

.005

[.13]

NOTES:

UNIT LEAK CURRENT NOT TO EXCEED 5mA.
ANGULAR ±3º
LINEAR ±.05 [1.3]

60

CSCR

8.2

CRITICAL FEATURES ARE CIRCLED

B

500000048374

RCC
9/23/2013
RCC
4/16/2013

Control boxes are designed to be used on Pentair motors with the same HP and Voltage ratings.
DoVIEW
not use on motors with different ratings.
FRONT
A

500000045918

REV.
LETTER

CHANGE
ORDER
No.

DO NOT SCALE DRAWING

TOLERANCE EXCEPT AS NOTED

[X.]
.X
[.X]
.XX
[.XX]
.XXX

ANGULAR

125

[3.2]
½

THIRD ANGLE PROJECTION

DR.

CH.

AP.

DATE:

4

SCALE:

DATE

10/1/2013 1:28:38 PM -

PENTEK Customer Hotline: 1-866-9PENTEK

CONF
other
Water
forbid
Penta

15

pump protection

Single-Phase Protectors
Engineered protection for single-phase motors
1/3 - 15 HP, Single Phase, 50/60 Hz applications
Pentek offers a full range of 1/3 - 15 HP
Protectors for Residential, Commercial,
Multiple Housing and Farm Water System
applications where a 4" submersible, 2 and
3-wire motor is used and for above-ground
pressure-boost applications.
®

Applications
Pentek offers 5 models for your application
needs based on HP and Motor Type: SPP-111P, 
SPP-111P-3RL, SPP-231P, SPP-233P and SPP-235P.

Protects Pumps From
Dry Well	

Overvoltage	

Overcurrent (Jammed Impeller)

Rapid Cycling	 Undervoltage	

Flow Restriction (Dead Head)

Specifications
			115 VOLT MODELS		
Model #	
Enclosure Type	

230 VOLT MODELS

SPP-111P	

SPP-111P-3RL	

SPP-231P	

SPP-233P	

SPP-235P

Insider	

NEMA 3R	

Insider	

NEMA 3R	

NEMA 3R

1-Phase
Line Voltage	

115VAC	

115VAC	

230VAC	

230VAC	

230VAC

Load Range	

1/3 - 1/2 HP	

1/3 - 1 HP	

1/2 - 1 HP	

1/2 - 3 HP	

5 - 15 HP

Frequency	

50 - 60 Hz	

50 - 60 Hz	

50 - 60 Hz	

50 - 60 Hz	

50 - 60 Hz

125%	

125%	

125%	

125%

132VAC	

265VAC	

265VAC	

265VAC

95VAC	

190VAC	

190VAC	

190VAC

10 sec.	
2 sec.	
4 sec.	

10 sec.	
2 sec.	
4 sec.	

5 sec.	
2 sec.	
4 sec.	

5 sec.
2 sec.
4 sec.

Operating Points
	Overload
	 (% of Cal. Point)	
125%	
	Overvoltage
	 Reset Point	
132VAC	
	Undervoltage
	 Reset Point	
95VAC	
	 Trip Delay
	 (Overload)	
10 sec.	
	 Trip Delay (Dry Well)	 2 sec.	
	 Optional Trip Delay	 4 sec.	

Restart Delay Time
	Over/Under
	 Voltage Delay	
5 sec.	
5 sec.	
5 sec.	
5 sec.	
5 sec.
	 All Other Faults	
2-225 min.	 2-225 min. 	 2-225 min.	 2-225 min.	 2-225 min.
	 (Dry Well REC. Timer)
Output Contact	
1 HP	
1 HP	
1 HP 	
3 HP 	
480VA @
Rating (SPST)			
(17 amps max.)	 (17 amps max.)	240VAC
Power Consumption
(max.)	

5 amps	

Weight w/o Enclosure	
Weight w/Enclosure	
Enclosure Size	

16

5 amps	

5 amps	

5 amps	

5 amps

10 oz.	

-	

10 oz.	

14 oz.	

14 oz.

-	

1.6 lbs.	

-	

1.6 lbs.	

1.6 lbs.

2.2" x 2.8"	

6"x 6"x 4"	

2.2"x 2.8"	

6"x 6"x 4"	

6"x 6"x 4"

PENTEK Customer Hotline: 1-866-9PENTEK

pump protection

“The Insider ” SPP-111P & SPP-231P
For 1/3–1 HP applications

Applications
Water systems…for residential, multiple housing, farm and
commercial installations, where a 4" submersible 3-wire motor
is used.
SPP-111P & SPP-231P Insiders are “current monitors” designed
to protect Single-Phase pumps, which fit inside 1/3 - 1 HP 115V and
230V CSIR control boxes. A simple adjustment allows the Insider to
be calibrated to your specific pumping applications, reducing the
possibility of false or nuisance tripping. Its unique microprocessor
constantly monitors the incoming power for fluctuations in voltage
and current. If loss of suction or other abnormality is detected, the
Insider deactivates its output relay and directly disconnects the
pump motor. Then it begins its user-selectable “Restart Delay/
Dry Well Recovery” timer. When the timer counts zero or power is
removed and reapplied, the Insider reactivates its output relay and
turns the pump back on.
The Pentek Informer Remote Handheld Diagnostic Tool (sold separately) communicates directly
with all Pentek Pump Protectors and instantly displays 16 parameters including calibration
points, running points and last fault (see page 15).
®

Protects pumps from
Dry Well	

Overvoltage	

Flow Restriction (Dead Head)

Undervoltage	

Overcurrent (Jammed Impeller)

Features
	Restart delay can be set up to 225 minutes or placed in
manual reset mode
	Can be calibrated to specific pump/motor combinations
and various conditions
	Infrared communication with the Pentek Informer makes
diagnostics simple
	 Fits in existing 3-wire motor control boxes

SPP-231P installed

Weight

HP

Phase

VOLTS

FREQUENCY

Catalog
Number

1/3–1/2

1

115

50-60 Hz

SPP-111P

1

0.45

1/3–1

1

230

50-60 Hz

SPP-231P

1

0.45

PENTEK Customer Hotline: 1-866-9PENTEK

LBS.

KG

P 8115 WS

17

pump protection

SPP-111P-3RL, SPP-233P & SPP-235P
For 1/2–15 HP applications

Applications
Water systems…for residential, multiple housing, farm
and commercial installations, where a 4" 2 or 3-wire
submersible motor or above-ground motor is used.

Protects Pumps From
Dry Well	

Overvoltage

Flow Restriction (Dead Head)	

Undervoltage

Overcurrent (Jammed Impeller)

Features
The SPP-111P-3RL, SPP-233P & SPP-235P single-phase
protectors include a unique microcontroller-based voltage and current-sensing circuit that constantly monitors
the incoming power for fluctuations including overcurrent
and undercurrent. When an abnormality, such as loss
of suction, is detected, the control deactivates its output
relay and directly disconnects the pump motor. The SPP
then begins its user-selectable restart delay (dry-well
recovery) timer. When the timer counts to zero or power
is removed and reapplied, the SPP reactivates its output
relay and turns the pump back on. An infrared LED communicates directly with a handheld diagnostic tool called
the Informer (sold separately). The Informer displays 16
parameters including calibration point, trip point, running points, and last fault. The SPPs are all mounted in a
NEMA 3R enclosure.

Weight

HP

Phase

VOLTS

FREQUENCY

Catalog
Number

LBS.

KG

1/2 – 1

1

115

50-60 Hz

SPP-111P-3RL

1.6

0.7

1/2 – 1-1/2

1

230

50-60 Hz

SPP-233P-1.5

1.6

0.7

1/2 – 3

1

230

50-60 Hz

SPP-233P

1.6

0.7

5 & 7-1/2

1

230

50-60 Hz

SPP-235P-75*

2

0.9

10

1

230

50-60 Hz

SPP-235P-100*

2

0.9

15

1

230

50-60 Hz

SPP-235P-150*

2

0.9

* Current transformer included.

18

PENTEK Customer Hotline: 1-866-9PENTEK

pump protection

The Informer

Remote handheld diagnostic tool

Applications
The Pentek Informer is a handheld diagnostic tool
designed for use with Pentek Single-Phase Pump
Protectors equipped with infrared LED transmitters
(SPP-111P, 231P, 233P & 235P models).
®

Features
The Pentek Informer uses an infrared receiver to access
data sent from the SPP, allowing remote troubleshooting
of the system.
Each Pentek SPP is equipped with an infrared LED that
transmits information from the device. The Informer
must be aimed at the SPP as shown in the figure below.
As soon as power is applied, the Informer begins
receiving both past and present information and
displays it on the LCD.
The green COMM STATUS light indicates when the
Informer is receiving data from the SPP. If communication
is lost, the Informer will hold the last values it received.

Displayed Parameters
Diagnostic information received
and displayed in real-time:
	Voltage, Current, Power, Dry Well
	Overload Trip Points
	Calibration Voltage
	Last Fault
	Highest/Lowest Voltage Since Last Calibration

PENTEK Customer Hotline: 1-866-9PENTEK

Weight

Catalog
Number

LBS.

KG

SPP-Informer

1

0.45
P 8116 WS

19

6" submersible motors

6˝ Submersible Motors
For high-thrust water well applications

5-30hp, 230V, 60hz, 3 phase, 5-50hp, 460/380V, 60/50hz, 3 phase
Pentair's line of Pentek motors are
designed for long service life and years
of dependable operation. Innovative
design and robust characteristics
make this the perfect motor for
your pumping applications.
®

ENCAPSULATED,
WATER-FILLED DESIGN
The Pentek submersible motor combines
internal lubrication (a cooling blend of
water, glycol, and propylene), along with
superior materials, to provide the industry
with innovative and advanced design
features that will extend the serviceable
life of your installation. The encapsulated
design provides superior insulation, heat
transfer properties, and stability to the
motor’s windings (protecting the windings
from “flexing” or “vibration”).

ADDITIONAL FEATURES
Exceptional insulation rating (Class F) and
temperature rating (95°F / 35°C)
Vertical or horizontal mounting orientation
VFD-compatible
IP 68 protection rating

Motor lead – 157” / 4m – potted
connection, including ground wire.
Non-jacketed wire assembly for
easier handling and connections.
Fully replaceable.
Shaft – standard NEMA-splined,
431 stainless steel; excellent
tensile and torque strength, and
corrosion resistance
External sand slinger – added
protection against sand and other
abrasives
Upper bracket – “dual-flange”style; easier and faster assembly
to the pump
Upper bracket – epoxy-coated
cast iron; applied via
electrodesposition – provides
better adhesion of the coating
and more consistent coverage,
delivering a longer lasting, more
durable coating

Thrust Bearing

Water lubricated, KingsburyType – industry-accepted
standard for thrust bearing
construction.

Mechanical Seal

Silicone Carbide – excellent
abrasion, wear, and corrosion
resistance; resists deflection in
high-pressure, high heat, and highspeed conditions; high thermal
conductivity (heat dissipation).
Provides superior protection against
sand intrusion.

Pressure Equalizing Diaphragm
Minimizes expansion pressure
inside the motor due to changes
in temperature and pressure.

20

Motor casing – 304 stainless
steel; excellent forming and
welding characteristics, and
corrosion resistance

Lower bracket – epoxy-coated
cast iron; applied via
electrodesposition – provides
better adhesion of the coating
and more consistent coverage,
delivering a longer lasting, more
durable coating

PENTEK Customer Hotline: 1-866-9PENTEK

6" submersible motors

Materials of Consturction

Motor Dimensions

PARTS

MATERIALS

Motor sleeve, fasteners

304 stainless steel

Castings

cast iron - epoxy coated (applied via
electrodesposition)

Shaft

NEMA splined, 431 stainless steel

Thrust bearings

Kingsbury-type disc - carbon (resin
impregnated) pad - 420 stainless
steel

Mechanical seal

silicon carbide

Diaphragm, sand slinger

nitrile rubber

L

PENTEK 6" encapsulated - motor data sheet	
Nominal diameter	
6"/152.4 mm	
Effective diameter	
5.43"/138 mm	
Shaft extension length	
2.87" / 73 mm		
MOTOR
TYPE PHASE

NOTE

PENTEK
MODEL #

Rated
Service Factor 1.15 Locked
Thrust
Winding
Eff.
Eff.
Rotor KVA Load INSULATION Resistance
HP KW HZ VOLTS AMPS % P.F. % AMPS % P.F. % Amps Code (lbs)
CLASS
(ohm)
RPM

6PM2-5-2

5

mm* in** mm** lbs

kg

22.7

577

21.1

535

90

41

0.54

3450

24.9

632

22.7

577

102

46

J

0.79

3445

22.7

577

21.1

535

90

41

147.9

J

0.54

3450

24.9

632

22.7

577

102

46

83

187.6

J

0.40

3440

29.2

741.5

24.9

632

116

53

0.28

3450

31.8

807.5

27.5

698

121

55

77

78

17.4

77

81

97.5

J

7-1/2 5.5

22.0

79

82

24.4

79

84

147.9

J

3.7

15.8

77

78

17.4

77

81

97.5

6PM2-7-2-01 7-1/2 5.5

22.0

79

82

24.4

79

84

30.8

77

81

33.0

78

5

1763

Motors
are 60 Hz 6PM2-10-2
only
6PM2-15-2

10

7.5

15

11.0

43.2

78

84

47.0

78

86

281.8

J

6MP2-20-2

20

15.0

57.4

79

85

63.0

79

87

394.5

J

0.21

3450

35.1

892.5

35.1

892.5

147

67

6PM2-25-2

25

18.5

69.0

81

86

76.0

80

88

480.2

J

0.16

3450

38.0

964.5

38.0

964.5

165

75

6PM2-30-2

30

22.0

76.6

84

88

85.0

84

89

614.2

K

0.14

3500

41.8 1,060.5 41.1 1,044.5 190

86

45.5

G

48.8

J

22.7

577

21.1

535

90

41

67.9

G

74.0

J

24.9

632

22.7

577

102

46

45.5

G

48.8

J

22.7

577

21.1

535

90

41

67.9

G

74.0

J

24.9

632

22.7

577

102

46

85.6

G

93.8

J

29.2

741.5

24.9

632

116

53

127.0

F

140.9

J

31.8

807.5

27.5

698

131

55

170.2

G

197.3

J

35.1

892.5

35.1

892.5

147

67

219

G

240.1

J

38.0

964.5

38.0

964.5

165

75

276.8

G

307.1

J

41.8 1060.5 41.1 1044.5

190

86

393.1

H

439.7

K

47.1

1197

44.7 1134.5

209

95

49.9

1267

47.4 1204.5

292

132

6PM2-5-4
6PM2-7-4
6PM2-5-4-01
6”

in*

3445

15.8

6PM2-5-2-01

Weight

0.79

3.7

6PM2-7-2

Length

Three

5

3.7

7-1/2 5.5
5

3.7

6PM2-7-4-01 7-1/2 5.5

Motors
are dual
rated
50 Hz &
60 Hz

6PM2-10-4

10

7.5

6PM2-15-4

15

11.0

6PM2-20-4

20

15.0

6MP2-25-4

25

18.5

6PM2-30-4

30

22.0

6PM2-40-4

40

30

60

230

50

380

9.1

76

84

60

460

7.9

77

78

50

380

12.8

78

86

60

460

11.0

79

82

50

380

9.1

76

84

60

460

7.9

77

78

50

380

12.8

78

86

60

460

11.0

79

82

50

380

17.8

78

85

60

460

15.4

77

81

50

380

25.6

77

87

60

460

21.6

78

84

50

380

34.0

78

89

60

460

28.5

79

85

50

380

41.0

79

89

60

460

34.5

81

86

50

380

46.0

83

90

60

460

38.0

84

88

50

380

62.5

83

90

60

460

52.7

84

88

77

81

12.2

79

84

8.7

77

81

12.2

79

84

16.5

78

83

23.5

78

86

31.5

79

87

38.0

80

88

42.5

84

89

58.0

84

89

2.97
1763
1.98
2.97
F

1.98
1.46

3485

0.99
0.72
0.56
0.50
0.40

6182

380 77.6 83
90
449.8
G
0.33
60 460 64.3 85
87 70.8 85
89
500.5
J
* = Motors with serial numbers beginning with 200, and serial numbers between 20105213xxxx and 20109113xxxx, are equipped with a 4-stud, “single-flange”-style mounting bracket.
** = Motors with serial numbers beginning with 20109213xxxx are equipped with a “dual-flange”-style mounting bracket.
50 Hz performance numbers are at a service factor of 1.0.
6PM2-50-4

50

37

50

8.7

3485

PENTEK Customer Hotline: 1-866-9PENTEK

2800
3445
2810
3450
2800
3445
2810
3450
2800
3440
2810
3450
2810
3450
2820
3450
2880
3500
2860
3490
2840
3480

21

6" submersible motors

6" Hitachi Submersible Motors
®

For high-thrust water well applications

5-50 HP, Single and Three Phase, 200V, 230V and 460V, 60 Hz, 3,600 RPM
Hitachi Motors are designed for long service life
and years of dependable operation. Innovative
design and robust characteristics make this the
perfect motor for your pumping applications.
®

Encapsulated, Water-Filled Design
Combined with exceptional insulation and a patented
epoxy fill resin, these motors exceed NEMA requirements
for high water temperature by 18°F (-7.7°C). Designed with
internal lubrication and cooling blend of water, antifreeze, and
an antirust mixture, Hitachi submersible motors are unique
in providing the industry with innovative and robust design
features that will extend the serviceable life of your installation.

Features
	

	 Higher Efficiencies and Lower Current Consumption –
For reduced energy costs
	 Corrosion-Resistant Design – For long life

	

	 High-Capacity Kingsbury-type Bearings – 
For dependable performance
	 Low-Profile NEMA Design – For ease of installation
	 Replaceable Plug-in Motor Lead – For ease of maintenance

	

	 Dual Voltage Type – For application versatility
(5 HP – 30 HP 3-Phase Motors)
	VFD-Compatible

Hitachi is a registered trademark
of Hitachi Industrial Equipment
Systems Co., Ltd.
®

22

PENTEK Customer Hotline: 1-866-9PENTEK

6" submersible motors

Motor Dimensions

Materials Of Construction

PARTS	MATERIALS
Motor Sleeve	
Stainless steel construction
Castings 	
Baked epoxy-coated gray iron
Fasteners 	
Stainless steel
Shaft 	
NEMA splined stainless steel
Flange 	
NEMA standard type
Rotor 	
Double epoxy-coated
Thrust Bearings	
Kingsbury-type 420 stainless steel
Mechanical Seal 	
Nitrile rubber (NBR), grease packed
Diaphragm 	
Nitrile rubber
Sand Cap	
Polyurethane
Sand Slinger	
Stainless steel
Lead Wire (or Cable)	
Double-insulated, heat and water-resistant,
			
167°F/75°C, 600V

Diameter HP

kW Volts PH Hz

Catalog
Number

SERVICE
FACTOR

6

5

3.7

200

3

60

6HIT2-5-8

1.15

6

5

3.7

230

1

60

6HIT2-5-1

1.15

6
6
6

5
5
7.5

3.7
3.7
5.5

230
460
200

3
3
3

60
60
60

6HIT2-5-2
6HIT2-5-4
6HIT2-7-8

1.15
1.15
1.15

6

7.5

5.5

230

1

60

6HIT2-7-1

1.15

6
6
6

7.5
7.5
10

5.5
5.5
7.5

230
460
200

3
3
3

60
60
60

6HIT2-7-2
6HIT2-7-4
6HIT2-10-8

1.15
1.15
1.15

6

10

7.5

230

1

60

6HIT2-10-1

1.15

6
6
6

10
10
15

7.5
7.5
11

230
460
200

3
3
3

60
60
60

6HIT2-10-2
6HIT2-10-4
6HIT2-15-8

1.15
1.15
1.15

6

15

11

230

1

60

6HIT2-15-1

1.15

6
6
6
6
6
6
6
6
6
6
6
6
8
8

15
15
20
20
20
25
25
25
30
30
30
40
50
60

11
11
15
15
15
18.5
18.5
18.5
22
22
22
30
37
45

230
460
200
230
460
200
230
460
200
230
460
460
460
460

3
3
3
3
3
3
3
3
3
3
3
3
3
3

60
60
60
60
60
60
60
60
60
60
60
60
60
60

6HIT2-15-2
6HIT2-15-4
6HIT2-20-8
6HIT2-20-2
6HIT2-20-4
6HIT2-25-8
6HIT2-25-2
6HIT2-25-4
6HIT2-30-8
6HIT2-30-2
6HIT2-30-4
6HIT2-40-4
86HIT2-50-4*
86HIT2-60-4*

1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15

*Models are 8" motors with 6" pump connection.

WINDING
RESISTANCE
(OHMS)
0.618
R-Y, B-Y, R-B, 2.172,
0.512, 2.627
0.806
3.05
0.504
R-Y, B-Y, R-B, 1.401,
0.400, 1.774
0.651
2.43
0.315
R-Y, B-Y, R-B, 1.052,
0.316, 1.310
0.448
1.619
0.213
R-Y, B-Y, R-B, 0.678,
0.230, 0.850
0.312
1.074
0.189
0.258
0.861
0.146
0.21
0.666
0.119
0.166
0.554
0.358
0.331
0.278

RATED
SERVICE
INPUT
FACTOR
AMPS INPUT AMPS

PENTEK Customer Hotline: 1-866-9PENTEK

Locked
rotor
amps

Shaft
Extension
(L1)

LENGTH
(L2)

DIAMETER Thrust
(D)
Capacity

Weight

124

2.87"

22.95"

5.5"

3,500

95

24

27.5

124

2.87"

26.97"

5.5"

3,500

110

15
7.5
25.4

17
8.5
28.5

110
55
158

2.87"
2.87"
2.87"

22.95"
22.95"
24.80"

5.5"
5.5"
5.5"

3,500
3,500
3,500

95
95
99

36

41

167

2.87"

29.92"

5.5"

3,500

128

22
11
33.3

26
13
37.2

144
72
236

2.87"
2.87"
2.87"

24.80"
24.80"
26.97"

5.5"
5.5"
5.5"

3,500
3,500
3,500

99
99
110

50

58

202

2.87"

29.92"

5.5"

3,500

128

29
14.5
47.4

33
16.5
53.5

208
104
347

2.87"
2.87"
2.87"

26.97"
26.97"
29.92"

5.5"
5.5"
5.5"

3,500
3,500
3,500

110
110
128

72

85

275

2.87"

33.46"

5.5"

3,500

148

42
21
61.2
54
27
77.3
68
34
91.8
82
41
56
65
80

46
23
69.5
60
30
87.5
76
38
104
94
47
61
73
90

320
160
431
392
196
578
530
265
674
610
305
420
435
556

2.87"
2.87"
2.87"
2.87"
2.87"
2.87"
2.87"
2.87"
2.87"
2.87"
2.87"
2.87"
2.87"
2.87"

29.92"
29.92"
31.5"
31.5"
31.5"
36.22"
36.22"
36.22"
38.19"
39.19"
38.19"
40.55"
45.28"
48.03"

5.5"
5.5"
5.5"
5.5"
5.5"
5.5"
5.5"
5.5"
5.5"
5.5"
5.5"
5.5"
7.52"
7.52"

3,500
3,500
3,500
3,500
3,500
3,500
3,500
3,500
3,500
3,500
3,500
5,000
5,000
5,000

128
128
137
137
137
161
161
161
176
176
176
187
353
408

Type 1 NEMA Enclosure
In-Panel Circuit Breaker
Magnetic Contactor
Terminal Blocks for External Controls
UL Recognized

®

D

19.5

®

Hitachi is a registered trademark of Hitachi Industrial Equipment Systems Co., Ltd.

L

17.5

Hitachi Control Boxes:
	
	
	
	
	

L1

HP

kW

pH

Volts

CAtalog Number

5

3.7

1

230

HIT-5CBD

7.5

5.5

1

230

HIT-7.5CBD

10

7.5

1

230

HIT-10CBD

15

11

1

230

HIT-15CBD
P 8174 WS

23

8-14" submersible motors

8"-14" Hitachi Submersible Motors
®

For high-thrust water well applications

7.5-300 HP, Three Phase, 460V, 60 Hz, 2-Pole, 3,600 RPM. 4-Pole, 1800 RPM
Hitachi Motors are designed for long service
life and years of dependable operation.
Innovative design and robust
characteristics make this
the perfect motor for your
pumping applications.
®

Rewindable, water-tight Design
Specially developed leak-resistant denatured
polypropylene completely protects the copper coil
conductors from internal cooling fluids for long service
life in severe operating condidtions. Hitachi submersible
motors are unique in providing the industry with innovative
and robust design features that will extend the serviceable
life of your installation.

Features
	

	 Higher Efficiencies and Lower Current Consumption –
For reduced energy costs
	 Corrosion-Resistant Design – For long life

	

	 High-Capacity Kingsbury-type Bearings – 
For dependable performance
	 Low-Profile NEMA Design – For ease of installation
	VFD-Compatible

Hitachi is a registered trademark
of Hitachi Industrial Equipment
Systems Co., Ltd.
®

24

PENTEK Customer Hotline: 1-866-9PENTEK

8-14" submersible motors

8"-14" Hitachi Submersible Motors
®

For high-thrust water well applications

Motor Dimensions

Materials Of Construction

L1

PARTS	MATERIALS
Housing	
Baked epoxy-coated gray iron
Fasteners 	
Stainless steel
Shaft 	
Splined or keyed stainless steel
Rotor 	
Double epoxy-coated
Thrust Bearings	
Kingsbury -type 420 stainless steel
Mechanical Seal 	
Nitrile rubber (NBR), grease packed
Diaphragm 	
Nitrile rubber
Sand Slinger	
Baked epoxy-coated gray iron
Lead Wire (or Cable)	
Double-insulated, heat and water-	
			
resistant, 167°F/75°C, 600V

L

®

D

Diameter
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
12
12
12
14
14

HP
7.5
10
15
20
25
30
40
50
60
75
100
125
150
40
50
60
75
100
125
200
250
150
200
300
250
300

kW Volts PH Hz
5.5
460 3 60
7.5
460 3 60
11
460 3 60
15
460 3 60
18.5 460 3 60
22
460 3 60
30
460 3 60
37
460 3 60
45
460 3 60
55
460 3 60
75
460 3 60
90
460 3 60
110 460 3 60
30
460 3 60
37
460 3 60
45
460 3 60
55
460 3 60
75
460 3 60
90
460 3 60
150 460 3 60
185 460 3 60
110 460 3 60
150 460 3 60
225 460 3 60
185 460 3 60
225 460 3 60

Catalog
Number
8HIT4-7-4
8HIT4-10-4
8HIT4-15-4
8HIT4-20-4
8HIT4-25-4
8HIT4-30-4
8HIT2-40-4
8HIT2-50-4
8HIT2-60-4
8HIT2-75-4
8HIT2-100-4
8HIT2-125-4
8HIT2-150-4
10HIT4-40-4
10HIT4-50-4
10HIT4-60-4
10HIT4-75-4
10HIT4-100-4
10HIT4-125-4
10HIT2-200-4
10HIT2-250-4
12HIT4-150-4
12HIT4-200-4
12HIT2-300-4
14HIT4-250-4
14HIT4-330-4

SERVICE
FACTOR
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15

WINDING
RESISTANCE
(OHMS)
2.178
2.178
1.519
1.519
0.888
0.888
0.372
0.331
0.278
0.218
0.164
0.132
0.115
0.408
0.408
0.288
0.257
0.171
0.171
0.0929
0.0776
0.138
0.119
0.0386
0.0552
0.0517

RATED
INPUT
AMPS
13
16
23
29
38
44
56
65
80
96
127
161
197
62
73
91
106
145
175
235
295
190
220
350
305
370

SERVICE
FACTOR
INPUT AMPS
14
18
26
33
43
50
63
73
90
109
145
180
220
71
83
104
121
166
200
270
340
218
250
396
350
425

Locked
Shaft
rotor Extension LENGTH
amps
(L1)
(L2)
98
4.000
37.40
98
4.000
37.40
151
4.000
41.34
151
4.000
41.34
207
4.000
44.09
207
4.000
44.09
380
4.000
44.09
435
4.000
46.44
556
4.000
49.19
675
4.000
53.15
855
4.000
58.27
1122
4.000
66.14
1331
4.000
70.08
286
4.000
49.21
286
4.000
49.21
474
4.000
59.84
485
4.000
59.84
670
5.000
69.68
693
5.000
69.68
1260
5.000
69.68
1500
5.000
79.53
1021
5.000
56.3
1195
5.000
68.11
2700
5.000
78.75
1870
5.000
68.31
2300
5.000
76.18

DIAMETER Thrust
(D)
Capacity
7.52
10000
7.52
10000
7.52
10000
7.52
10000
7.52
10000
7.52
10000
7.52
10000
7.52
10000
7.52
10000
7.52
10000
7.52
10000
7.52
10000
7.52
10000
8.52
10000
8.52
10000
8.52
10000
8.52
10000
8.52
10000
8.52
10000
8.52
10000
8.52
10000
10.53
10000
10.53
10000
10.53
10000
12.60
10000
12.60
10000

Weight
298
298
320
320
342
342
320
353
408
463
518
595
661
507
507
639
639
794
794
948
1455
959
1235
1455
1698
1940

*Motor is 8" diameter, but constructed to operate with a 6" liquid end.
**	8" motors with 6" flange when using stainless steel bolts have a thrust rating of 5,000 lbs.
A thrust value of 10,000 lbs. can be obtained using grade-8 heat-treated stainless steel bolts.
Hitachi is a registered trademark of Hitachi Industrial Equipment Systems Co., Ltd.
®

PENTEK Customer Hotline: 1-866-9PENTEK

P 8174 WS

25

three-phase starters

PPX NEMA Pump Panels

NEMA Certified, heavy-duty design for outdoor applications
NEMA Pump Panels, Size 1 – 5, 208V, 230 – 240V, 460 – 480V, 575 – 600V
Pentek PPX Pump Panels are designed for agricultural
and commercial above-ground pumping applications
and provide full-voltage control of AC motors up to
200 HP. PPX panels are offered in NEMA 3R (outdoor
rated) enclosures with a door gasket to protect
electrical components from harsh environments.
®

Features
	NEMA 3R (Outdoor Rated) Enclosure
	Class R Fusible Disconnect (fuses not included)
	NEMA rated components
	Electronic overloads with user-selectable
current ranges, trip characteristic and manual/
automatic restart
	External Overload Reset
	Split mounting plate design enables easy mounting of
devices without disconnecting the main motor circuit

Mounting Configuration
ON

50°
OFF

26

PENTEK Customer Hotline: 1-866-9PENTEK

three-phase starters

PPX Selection Guide
208 VAC
NEMA SIZE

MAX HP OF
CONTACTOR

DISCONNECT A

1

7.5

30

2

10

60

3

25

100

4

40

200

MAX TOTAL A
OF PPX PANEL

OIL CURRENT
RANGE

CATALOG
NUMBER

DIMENSIONS
HxWxD

WEIGHT
(LBS.)

13.5

6.5 – 13.5

PPX-1A-13-30R

34 x 21 x 7

85

27

13 – 27

PPX-1A-27-30R

34 x 21 x 7

85

50

25 – 50

PPX-2A-50-60R

34 x 21 x 7

90

70

35 – 70

PPX-3A-70-100R

47.5 x 25 x 9

195

100

65 – 135

PPX-3A-135-100R

47.5 x 25 x 9

195

65 – 135

PPX-4A-135-200R

47.5 x 25 x 9

195

135

Note: For HPs with multiple part numbers, use motor amperage to select a panel.

230-240 VAC
NEMA SIZE

MAX HP OF
CONTACTOR

DISCONNECT A

1

7.5

30

2

15

60

3

30

100

MAX TOTAL A
OF PPX PANEL

OIL CURRENT
RANGE

CATALOG
NUMBER

DIMENSIONS
HxWxD

WEIGHT
(LBS.)

13.5

6.5 – 13.5

PPX-1B-13-30R

34 x 21 x 7

85
85

27

13 – 27

PPX-1B-27-30R

34 x 21 x 7

50

25 – 50

PPX-2B-50-60R

34 x 21 x 7

90

70

35 – 70

PPX-3B-70-100R

47.5 x 25 x 9

195

100

65 – 135

PPX-3B-135-100R

47.5 x 25 x 9

195

Note: For HPs with multiple part numbers, use motor amperage to select a panel.

460-480 VAC
MAX TOTAL A
OF PPX PANEL

OIL CURRENT
RANGE

CATALOG
NUMBER

DIMENSIONS
HxWxD

WEIGHT
(LBS.)

13.5

6.5 – 13.5

PPX-1C-13-30R

34 x 21 x 7

85

27

13 – 27

PPX-1C-27-30R

34 x 21 x 7

85

50

25 – 50

PPX-2C-50-60R

34 x 21 x 7

90

70

35 – 70

PPX-3C-70-100R

47.5 x 25 x 9

195

100

65 – 135

PPX-3C-135-200R

47.5 x 25 x 9

195

135

65 – 135

PPX-4C-135-200R

47.5 x 25 x 9

195

130 – 270

PPX-5C-270-400R

52 x 22 x 10

285

NEMA SIZE

MAX HP OF
CONTACTOR

DISCONNECT A

1

10

30

2

25

60

3

50

100

4

100

200

5

200

400

270

Note: For HPs with multiple part numbers, use motor amperage to select a panel.

575-600 VAC
NEMA SIZE

MAX HP OF
CONTACTOR

DISCONNECT A

1

10

30

2

25

60

3

50

100

4

100

200

5

200

400

MAX TOTAL A
OF PPX PANEL

OIL CURRENT
RANGE

CATALOG
NUMBER

DIMENSIONS
HxWxD

WEIGHT
(LBS.)

13.5

6.5 – 13.5

PPX-1D-13-30R

34 x 21 x 7

85

27

13 – 27

PPX-1D-27-30R

34 x 21 x 7

85

50

25 – 50

PPX-2D-50-60R

34 x 21 x 7

90

70

35 – 70

PPX-3D-70-100R

47.5 x 25 x 9

195

100

65 – 135

PPX-3D-135-100R

47.5 x 25 x 9

195

135

65 – 135

PPX-4D-135-200R

47.5 x 25 x 9

195

270

130 – 270

PPX-5D-270-400R

52 x 22 x 10

285

Note: For HPs with multiple part numbers, use motor amperage to select a panel.

PENTEK Customer Hotline: 1-866-9PENTEK

P 8175 WS

27

drive products

PENTEK INTELLIDRIVE
WATER PRESSURE CONTROL CENTER
™

CONSTANT PRESSURE
FOR WELL PUMP SYSTEMS
For use with both Submersible and Above Ground
Well Pumps to Control Changes in Water Demand
Most homeowners with well systems know what happens
when demand for water changes. If they’re taking a shower,
water pressure drops when someone starts the dishwasher
or turns on a faucet. Weak showers, unclean dishes and
other water pressure problems become frustrating daily
experiences.
A “Variable Frequency Drive” for Submersible
or Above Ground Well Pumps.
The Pentek Intellidrive Water Pressure Control
Center directs changes in pump motor speed,
responding to fluctuations in demand. If water
pressure starts dropping, an electronic pressure
transducer signals the drive to accelerate the pump
motor to increase water volume going into the home.
™

The Benefit? Strong, equal pressure, everywhere.
Homeowners will recognize the difference right away.
Water flows smoothly and evenly throughout the home.
Regardless of changes in demand, water pressure stays
the same: in the shower, the dishwasher, and from every
other faucet and fixture.
And when homeowners are outside, they’ll enjoy a lush,
green lawn and landscaping. Sprinkler systems will
perform at their best, with consistent spray patterns,
constantly pressurized to achieve complete coverage.
The pump and motor will last longer.
Pentek Intellidrive features “Soft Start/Coast to Stop”
design, which minimizes mechanical stress. And during
long-running applications like lawn irrigation, pressurecycling is eliminated…another system stress reducer.
Pentek Intellidrive Leading-edge technology for a
premium residential water system that makes life better!
™

28

Drive products

ADVANCED TECHNOLOGY. SUPERIOR PERFORMANCE.
KEYHOLE MOUNT
For fast and easy installation
LCD INFORMATION
CENTER
Displays installation,
status and fault
information in easy-tounderstand language
instead of codes
GROUND DETECTION
Message Center shows
if t here is a grounding
problem
MULTIPLE 
ACCESSORY INPUTS
Additional inputs allow use
of multiple drive accessories
at the same time
BEST-IN-CLASS
EMI/RFI FILTER
Superior noise and
interference protection,
including AM radio signals

SPACIOUS
WIRING AREA
For fast and easy
installation

ELECTRONIC
PRESSURE TRANSDUCER
More accurate and reliable
than mechanical pressure
switch, with piezo resistive
technology designed to
resist water hammer
TEMPERATURESENSITIVE
INTELLIGENT FAN
Operates when needed 
for quiet operation
SD CARD SLOT
For easy software 
updates when provided
by manufacturer

SPRING TERMINALS
For secure connections
and easy installation
without special tools

PROGRAMMABLE
INPUT/OUTPUT RELAYS
Provide application
flexibility

EASY-ACCESS 
CONDUIT OPENINGS
Align with appropriate
terminals for straight-in
accessibility. Fits 1/2", 3/4"
or 1-1/4"

REMOVABLE
TERMINAL BLOCKS
For easy wiring of motor
and power supply – field
replaceable

29

drive products

AN INTELLIGENT CONTROL... 
SIMPLE TO OPERATE, 
EASY TO UNDERSTAND.

No other variable frequency drive provides such an
effective operator interface with easy touchpad operation
and a spectrum of features that allows easy configuration
for most residential water control applications. And the
LCD Information Center communicates clearly in words,
instead of confusing light codes.

START-UP IS SIMPLE…
ENTER MOTOR PHASE

ENTER MOTOR TYPE

ENTER SERVICE FACTOR AMPS

ENTER CURRENT TIME

ENTER CURRENT DATE

1

2

3

4

5
6

BACKLIT LCD DISPLAY

PUMP-OUT BUTTON
For cleaning of new
wells and fixed frequency
operation
PSI PRESET
Sets pressure to
any value desired

LED STATUS
INDICATION

CHOOSE “PUMP OUT”
OR “AUTO START”

DIAGNOSTICS INDICATOR
Self diagnostic messaging
for ease of service

FAULT LOG
Stores 15 faults
with timestamps
KEYPAD LOCKOUT
For security against tampering
and unintended adjustments
MULTI-LINGUAL OPTIONS
English, French or Spanish
AUTO-START
With automatic line-fill
functionality, providing
constant pressure operation

30

PENTEK Customer Hotline: 1-866-9PENTEK

drive products

Product Line Overview
MODEL NUMBER

PID10

PID20

PID50

MOTOR TYPE

MAXIMUM HP

INPUT VOLTAGE

OUTPUT AMPS

ENCLOSURE
RATING

1-PHASE
2-WIRE*

1.0

190-265

9.5

3R

1-PHASE
3-WIRE

1.0

190-265

7.5

3R

3-PHASE

1.0

190-265

5.0

3R

1-PHASE
2-WIRE*

1.5

190-265

11.0

3R

1-PHASE
3-WIRE

2.0

190-265

13.5

3R

3-PHASE

2.0

190-265

8.5

3R

1-PHASE
2-WIRE*

1.5

190-265

11.0

3R

1-PHASE
3-WIRE

2.0

190-265

13.5

3R

3-PHASE

5.0

190-265

18.0

3R

*Pentek (PSC) 2-wire motors only
®

y Customer
p pumpHotline:
motor.
PENTEK
1-866-9PENTEK

31

PENTEK Intellidrive accessories
™

VFD-ALT

Alternating Control Panel for the PENTEK INTELLIDRIVE

™

The Alternating Panel is designed to equalize wear on the
pumps by alternating two Pentek Intellidrive VFD’s every
24 hours. This panel alternates which pump is the lead and
lag in a duplex system. It can also be used independently
of the lead/lag function.
™

Applications
Alternate Pentek Intellidrive VFD's on pressure boosting
systems. Equalize wear on pumps.
	 Power On Indicator
	 Pump 1 Enabled Indicator
	 Pump 2 Enabled Indicator
	 Alternate/Off Switch

The Alternating Pentek Intellidrive
Control Panel will alternate pumps that
are connected to the Pentek Intellidrive.

Specifications
	 120 VAC
	 6 ft. Power Cord
	 NEMA 1 Enclosure
	 4 Terminal Blocks To Connect VFD's - Use 18 AWG Wire

* Additional programming is necessary
in the Pentek Intellidrive.

System Overview
After the panel is mounted, wire the panel, plug it into
a 120 VAC outlet, and turn the switch to Alternate.
“Pump 1” will turn on and the “pump 1 enable” LED
will illuminate. After 24 hours “Pump 2” will turn on
and the “pump 2 enable” LED will illuminate.

32

Dimensions (in.)

model
Number

rated volts

HZ

Height

Width

Depth

weight lbs.

VFD-ALT

120 VAC

50/60

5.375

3.25

1.625

1.0

PENTEK Customer Hotline: 1-866-9PENTEK

PENTEK Intellidrive accessories
™

Surge Protection Kits
120/240 VAC Protection for PENTEK INTELLIDRIVE

™

Surge protection device for use with any 230V Pentek Intellidrive . Line side arrester
easily installed in the circuit breaker. Load side installed on the drive output. LED
Diagnostic lights help provide positive indication of power and surge protection.*
™

Features
	 Compact size to fit most applications
	 Diagnostic LEDs to indicate system power & surge protection
	 Weatherproof design allows for use in most environments
	 Service Voltage: 240 VAC (line side); 240VAC (Load side)
	 Parallel connection for easy installation
	 Auto reset to handle multiple surges

Line Side:
Service Wiring

Peak Surge
Current

Two Power Cords
+ Ground

72,000A/Phase
36,000A/Mode

PENTEK Customer Hotline: 1-866-9PENTEK

VFD-SGA: Surge Protection Kit (includes line & load side)
VFD-SGA-LN: Line Side Surge Protection
VFD-SGA-LD: Load Side Surge Protection

Load Side:
Service Wiring

Peak Surge
Current

MCOV

Two Power Cords +
Ground

75,000A

320V

MCOV

UL 1449, 3rd Ed,
V.P.R.

Short Circuit
Rating

UL 1449, 3rd Ed. In
V.P.R.

130/260V

500V L-G, 900V L-L

10,000A

10,000A

33

PENTEK Intellidrive accessories
™

VFD-WS
Moisture Sensor

The Moisture Sensor is designed to shut off your
Pentek Intellidrive if water is detected. When water
touches the two detection points on the bottom of the
Moisture Sensor, it sends a signal to the VFD to shut it off.
™

Applications
Prevent flooding from broken pipes or leaks! The
VFD-WS is designed to connect to, and shut off, the
Pentek Intellidrive when water from broken pipes is
detected. The entire property you are providing water
to is protected from flooding.
	 Detects water At 1/16"
	 Waterproof epoxy encapsulated enclosure
	 Indicators for alarm condition and ready condition
	 Auto reset

Specifications
	 24 VDC
	 Detects water at 1/16"
	 Auto reset
	 Red alarm indicator for a water alarm
	Green ready indicator to indicate the
systems is ready for operation

Pentek Moisture Sensors detect water
and shut down your Pentek Intellidrive
in the event of a water leak.
®

	 4 Conductor 18 gauge cable
	 15 Foot cord length

34

PENTEK Customer Hotline: 1-866-9PENTEK

PENTEK Intellidrive accessories
™

Model Number & System Overview
Dimensions (in.)

model
NUMBER

rated volts

HZ

Height

Width

Depth

weight lbs.

VFD-WS

24VDC

N/A

1.075

3.0

1.5

1.0

System Overview
(Fig. 1 - When the sensor is dry and the system has power, the green “Ready”
indicator will be illuminated.) (Fig. 2 - The red “Alarm” indicator light will
illuminate if water is touching both detection points on the bottom of the
Moisture Sensor.) The Moisture Sensor can be automatically reset by wiping of
the sensors on the bottom of the unit. (Fig. 3 - When the Moisture Sensor is dry,
the green “Ready” indicator will illuminate.) The Pentek Intellidrive must be
"Reset" to return to normal operation.
™

Fig. 1
Green "Ready"
Indicator
Illuminated

Fig. 2
Red “Alarm” Indicator is illuminated if
water is touching the two detection points
on the bottom of the Moisture Sensor.

PENTEK Customer Hotline: 1-866-9PENTEK

Fig. 3
Green "Ready"
Indicator Illuminated

35

drive products

PPC3 & PPC5

State-of-the-art pump protection and controllers
Pentek Pump Controllers provide innovative pumping
solutions for maximizing pump functionality, optimizing pump
system design and reducing operating energy costs.
®

Pentek PPCs can be used on all centrifugal motor-driven
pumps including close-coupled motor drive, frame mount,
submersible and line shaft turbine pumps, in a wide range of
applications.

PPC3 NEMA 1
PPC5 NEMA 1
36

*NEMA 1 Enclosure meant for Indoor Use

PPC5 NEMA 1
PENTEK Customer Hotline: 1-866-9PENTEK

drive products

PPC Features
The Pentek PPC3 and PPC5 Pump Controllers are programmed with the Pentek Assistant and pre-jumpered, providing
ease of setup for constant pressure applications. The Pentek Assistant defaults to pre-defined parameters and prompts
the user for application-specific information. The ‘Help’ key activates parameter descriptions, providing easy reference
to the programming guide.
®

Pentek Assistant
	Guides the user through the setup
process for constant pressure
applications, taking less than 2
minutes to program; allows for
local or remote operation
	Includes macros for both
submersible and above-ground
pump applications
	 System harmonics evaluation process

Additional Application Functions
	Auto-Restart Functionality – re-starts pump
after power loss
	Easily configured for constant flow applications
by adjusting 2 additional menu parameters
	Multiple System Setpoints or Operating Condition –
includes 2 independent process control setpoints to
allow operation under a second process
	 Time Function supports 4 Daily and Weekly
	 START/STOP/BOOST times

Process Benefits
Variable Speed Control
	Meets requirements of process control with constant
pressure at variable flow conditions or constant flow
at variable pressure conditions

Reduced Energy Costs
	Calculate energy savings online using BEC2
software at www.bec2.net

Pump Protection
	 From loss of prime, dead head and blocked suction

Motor Protection
	From ground fault, short circuit, phase loss and
imbalance, overload, undervoltage and overvoltage

System Protection (PPC5 only)
	From harmonics, featuring an input choke that exceeds
the performance of a fixed 5% impedance line reactor

Phase Conversion
	The PPC5 will convert 1-phase power into 3-phase
power, allowing the use of a 3-phase motor
	 The PPC3 is available in both 1 & 3 phase models

PENTEK Customer Hotline: 1-866-9PENTEK

P 8118 WS

37

drive products

PPC Selection Guide
PPC3, PPC5

PPC3 / PPC5 Comparison
Features

PPC3

PPC5

HP Ratings

1 – 30

1/2 – 200

Voltages

230, 460

230, 460, 575

Frequency

50/60 Hz

50/60 Hz

Floating Choke

No

Yes

Harmonic Signature

Good

Best

No. of Relays

1

3 (ext. to 6 available)

Digital Inputs

5

6

Multiple Pump Capable

No

Yes

Mod. Bus

No

Yes

Enclosure Type

NEMA 1

NEMA 1, 12

The output current (or amps) of the PPC must be greater than or equal to the maximum rated motor current.

PPC3 Selection
200-240 Volt – 1-Phase IN, 3-Phase OUT

200-240 Volt – 3-Phase IN, 3-Phase OUT

OUTPUT
AMPS

Enclosure
Size

Mounting

Model
Number
NEMA 1

OUTPUT
AMPS

Enclosure
Size

Mounting

Model
Number
NEMA 1

4.7

R1

WALL

PPC3-1-4A7-1

4.7

R1

WALL

PPC3-2-4A7-1

6.7

R1

WALL

PPC3-1-6A7-1

6.7

R1

WALL

PPC3-2-6A7-1

7.5

R2

WALL

PPC3-1-7A5-1

7.5

R1

WALL

PPC3-2-7A5-1

9.8

R2

WALL

PPC3-1-9A8-1

9.8

R2

WALL

PPC3-2-9A8-1

17.6

R2

WALL

PPC3-2-17A6-1

24.4

R3

WALL

PPC3-2-24A4-1

31.0

R4

WALL

PPC3-2-31A0-1

46.2

R4

WALL

PPC3-2-46A2-1

380-480 Volt – 3-Phase IN, 3-Phase OUT

38

OUTPUT AMPS

Enclosure Size

Mounting

Model Number NEMA 1

2.4

R1

WALL

PPC3-4-2A4-1

3.3

R1

WALL

PPC3-4-3A3-1

4.1

R1

WALL

PPC3-4-4A1-1

5.6

R1

WALL

PPC3-4-5A6-1

8.8

R1

WALL

PPC3-4-8A8-1

12.5

R3

WALL

PPC3-4-12A5-1

15.6

R3

WALL

PPC3-4-15A6-1

23.1

R3

WALL

PPC3-4-23A1-1

31.0

R4

WALL

PPC3-4-31A0-1

38.0

R4

WALL

PPC3-4-38A0-1

44.0

R4

WALL

PPC3-4-44A0-1

PENTEK Customer Hotline: 1-866-9PENTEK

drive products

PPC5 Selection
208-240 Volt – 3-Phase IN, 3-Phase OUT
Model
Number
NEMA 1

OUTPUT Enclosure
Mounting
AMPS
Size

400-480 Volt – 3-Phase IN, 3-Phase OUT
Model
Number
NEMA 12

Model
Number
NEMA 1

Model Number
NEMA 12

Wall

PPC5-4-3A3-1

PPC5-4-3A3-12

OUTPUT Enclosure
Mounting
AMPS
Size

4.6

R1

Wall

PPC5-2-4A6-1 PPC5-2-4A6-12

3.3

R1

6.6

R1

Wall

PPC5-2-6A6-1 PPC5-2-6A6-12

4.1

R1

Wall

PPC5-4-4A1-1

PPC5-4-4A1-12

7.5

R1

Wall

PPC5-2-7A5-1 PPC5-2-7A5-12

6.9

R1

Wall

PPC5-4-6A9-1

PPC5-4-6A9-12

11.8

R1

Wall

PPC5-2-11A-1 PPC5-2-11A-12

8.8

R1

Wall

PPC5-4-8A8-1

PPC5-4-8A8-12

16.7

R1

Wall

PPC5-2-16A-1 PPC5-2-16A-12

11.9

R1

Wall

PPC5-4-11A-1

PPC5-4-11A-12

24.2

R2

Wall

PPC5-2-24A-1 PPC5-2-24A-12

15.4

R2

Wall

PPC5-4-15A-1

PPC5-4-15A-12

30.8

R2

Wall

PPC5-2-30A-1 PPC5-2-30A-12

23

R2

Wall

PPC5-4-23A-1

PPC5-4-23A-12

46.2

R3

Wall

PPC5-2-46A-1 PPC5-2-46A-12

31

R3

Wall

PPC5-4-31A-1

PPC5-4-31A-12

59.4

R3

Wall

PPC5-2-59A-1 PPC5-2-59A-12

38

R3

Wall

PPC5-4-38A-1

PPC5-4-38A-12

74.8

R4

Wall

PPC5-2-74A-1 PPC5-2-74A-12

44

R4

Wall

PPC5-4-44A-1

PPC5-4-44A-12

88

R4

Wall

PPC5-2-88A-1 PPC5-2-88A-12

59

R4

Wall

PPC5-4-59A-1

PPC5-4-59A-12

114

R4

Wall

PPC5-2-114A-1 PPC5-2-114A-12

72

R4

Wall

PPC5-4-72A-1

PPC5-4-72A-12

143

R6

Wall

PPC5-2-143A-1

-

77

R5

Wall

PPC5-4-77A-1

PPC5-4-77A-12

178

R6

Wall

PPC5-2-178A-1

-

96

R5

Wall

PPC5-4-96A-1

PPC5-4-96A-12

221

R6

Wall

PPC5-2-221A-1

-

124

R6

Wall

PPC5-4-124A-1

-

248

R6

Wall

PPC5-2-248A-1

-

157

R6

Wall

PPC5-4-157A-1

-

180

R6

Wall

PPC5-4-180A-1

-

196

R7

Floor

PPC5-4-196A-1

-

245

R7

Floor

PPC5-4-245A-1

-

Specifications are based on a 3-phase supply voltage, 208 volt or 230
volt. For operation on 1-phase input power, de-rate the drive output
current by 50%. Drive output is always 3-phase voltage.

The output current (or amps) of the PPC must be greater than or equal
to the maximum rated motor current.

500-600 Volt – 3-Phase IN, 3-Phase OUT
OUTPUT AMPS

Enclosure Size

Mounting

Model Number NEMA 1

Model Number NEMA 12

2.7

R1

Wall

PPC5-5-2A7-1

PPC5-5-2A7-12

3.9

R1

Wall

PPC5-5-3A9-1

PPC5-5-3A9-12

6.1

R1

Wall

PPC5-5-6A1-1

PPC5-5-6A1-12

9

R1

Wall

PPC5-5-9A0-1

PPC5-5-9A0-12

11

R1

Wall

PPC5-5-11A-1

PPC5-5-11A-12

17

R2

Wall

PPC5-5-17A-1

PPC5-5-17A-12

22

R2

Wall

PPC5-5-22A-1

PPC5-5-22A-12

27

R3

Wall

PPC5-5-27A-1

PPC5-5-27A-12

32

R3

Wall

PPC5-5-32A-1

PPC5-5-32A-12

41

R4

Wall

PPC5-5-41A-1

PPC5-5-41A-12

52

R4

Wall

PPC5-5-52A-1

PPC5-5-52A-12

62

R4

Wall

PPC5-5-62A-1

PPC5-5-62A-12

77

R5

Wall

PPC5-5-77A-1

PPC5-5-77A-12

99

R6

Wall

PPC5-5-99A-1

PPC5-5-99A-12

PENTEK Customer Hotline: 1-866-9PENTEK

39

accessories

Reactors & Filters
Increase motor life expectancy

Application

Installing an output reactor or filter can
increase motor life and performance in
many applications.

Variable frequency drives produce voltage spikes that are a
function of voltage rise time and length of motor cable. In
extreme cases, peak voltages may exceed three times nominal
operating voltage. Ideal for use with Pentek PPC3 and PPC5
Pump Controllers.
®

Reactors and Filters
A reactor is a resistance and inductance device that reduces
the voltage spikes. This is accomplished both by increasing the
voltage rise time as well as by improving the impedance match
of the motor and cable.
A filter combines a reactor with a capacitor network. The
capacitor network absorbs a portion of the voltage spike,
further reducing the peak voltage seen by the motor.

Reactor Enclosed

When to use a Reactor and Filter
The chart below will provide some guidelines as to when
to use a reactor or filter. Careful considerations should be
given when:
	 Long motor lead lengths are used
	Using NEMA standard, premium efficiency,
submersible motors
	 Quality and age of the motor are unknown
	 Using a submersible motor over 230V
	 The cost of replacing the motor is prohibitive
	 Consistency of environment and/or power quality is unknown

LEAD LENGTH

Filter Enclosed

MOTOR TYPE

50’-150’

230V

460V

NEMA ABOVE-GROUND
STANDARD EFFICIENCY

–

–

NEMA ABOVE-GROUND
STANDARD EFFICIENCY

–

–

SUBMERSIBLE

–

REACTOR

40

UP TO 50’

230V

460V

150’-1000’
230V

460V

–

FILTER

PENTEK Customer Hotline: 1-866-9PENTEK

accessories

Reactors

Increase motor life by eliminating voltage spikes

Reactor open

Reactor enclosed

W

W

D

H

H

D

Perfo rm an ce a nd Pro tec t io n fo r Drives.
C

US

Open Design (Low-Z) – CSA Listed, 230V or 460V Input, 50/60 Hz
Model #

Rated Amps

Height

Dimensions (in.)
Width

Depth

Weight LBS.

Minimum Cab Size

KDRA3P
KDRA4P
KDRB1P
KDRD1P
KDRD2P
KDRD3P
KDRD4P
KDRC1P
KDRF1P
KDRF2P
KDRF3P
KDRH1P
KDRI1P
KDRI2P
KDRG1P

7.6
11
14
21
27
34
40
52
65
77
96
124
156
180
240

4
4
5
6
6
6
6
6
7
7
7
9
9
9
9

4.18
4.18
6
7.2
7.2
7.2
7.2
7.2
9
9
9
11
11
11
11

4
4
4
4
4
4
4
5
6
6
6
7
7
7
7

4
5
7
10
10
12
12
15
25
25
30
40
50
45
60

–
–
–
–
–
–
–
–
–
–
–
–
–
–
–

Enclosed NEMA 1 Design – CSA Listed, 230V or 460V Input
Model #

Rated
Amps

Height

KDRA1PC1
KDRA2PC1
KDRA3PC1
KDRA4PC1
KDRB1PC1
KDRD1PC2
KDRD2PC2
KDRD3PC2
KDRD4PC2
KDRC1PC2
KDRF1PC3
KDRF2PC3
KDRF3PC4
KDRH1PC4
KDRI1PC4
KDRI2PC4
KDRG1PC4

3.4
4.8
7.6
11
14
21
27
34
40
52
65
77
96
124
156
180
240

6.5
6.5
6.5
6.5
6.5
7.5
7.5
7.5
7.5
7.5
9
9
15.5
15.5
15.5
15.5
15.5

Dimensions (in.)
Width
Depth
8
8
8
8
8
10
10
10
10
10
12
12
15
15
15
15
15

6
6
6
6
6
7
7
7
7
7
8
8
13
13
13
13
13

PENTEK Customer Hotline: 1-866-9PENTEK

Weight
LBS.

Minimum
Cab Size

8
8
8
9
11
16
16
18
18
21
37
37
65
75
75
80
95

C1
C1
C1
C1
C1
C2
C2
C2
C2
C2
C3
C3
C4
C4
C4
C4
C4

Enclosed NEMA 1 Design – CSA Listed, 575V Input
Model #

Rated
Amps

KDRA31PC1
KDRA35PC1
KDRA33PC1
KDRA34PC1
KDRA36PC1
KDRD31PC2
KDRD32PC2
KDRD35PC2
KDRD33PC2
KDRD34PC2
KDRC31PC2
KDRF31PC3
KDRF32PC3
KDRF33PC4
KDRH31PC4
KDRI31PC4
KDRI32PC4
KDRG31PC4

2.7
3.9
6.1
9
11
17
22
27
32
41
52
62
77
99
125
144
192
242

Dimensions (in.)
Height Width
Depth
6.5
6.5
6.5
6.5
6.5
7.5
7.5
7.5
7.5
7.5
7.5
9
9
15.5
15.5
15.5
15.5
15.5

8
8
8
8
8
10
10
10
10
10
10
12
12
15
15
15
15
15

6
6
6
6
6
7
7
7
7
7
7
8
8
13
13
13
13
13

Weight
LBS.

Minimum
Cab Size

8
8
8
9
11
16
16
18
18
21
21
37
37
65
75
75
80
95

C1
C1
C1
C1
C1
C2
C2
C2
C2
C2
C2
C3
C3
C4
C4
C4
C4
C4

41

accessories

Filters

Eliminate and dampen voltage spikes for long motor life

W

D

Filters Enclosed

H

Enclosed NEMA 1 Design, 230V, 460V or 575V Input
Dimensions (in.)
MODEL #

Rated AMPS

HZ

Height

Width

Depth

KLC4BE

4

50/60

6.5

8

6

Weight Lbs.

KLC6BE

6

50/60

6.5

8

6

9
9

KLC8BE

8

50/60

6.5

8

6

11

KLC12BE

12

50/60

6.5

8

6

11

KLC16BE

16

50/60

6.5

8

6

13

KLC25BE

25

50/60

7.5

10

7

16

KLC35BE

35

50/60

7.5

10

7

17

KLC45BE

45

50/60

7.5

10

7

18

KLC55BE

55

50/60

7.5

10

7

19

KLC80BE

80

50/60

9

12

8

32

KLC110BE

110

50/60

16

15

13

88

KLC130BE

130

50/60

16

15

13

96

KLC160BE

160

50/60

16

15

13

100

KLC200BE

200

50/60

16

15

13

115

KLC250BE

250

50/60

16

15

13

116

Enclosed NEMA 1 Design, CUL Listed, 230V, 460V or 575V Input
Dimensions (in.)

42

MODEL #

Rated AMPS

HZ

Height

Width

Depth

KLCUL4A1

4

50/60

12.25

12.5

6.75

Weight Lbs.
15

KLCUL6A1

6

50/60

12.25

12.5

6.75

15

KLCUL8A1

8

50/60

12.25

12.5

6.75

15

KLCUL12A1

12

50/60

12.25

12.5

6.75

15

KLCUL16A1

16

50/60

12.25

12.5

6.75

18

KLCUL18A1

18

50/60

12.25

12.5

6.75

21

KLCUL21A1

21

50/60

12.25

12.5

6.75

21

KLCUL25A1

25

50/60

12.25

12.5

6.75

21

KLCUL27A1

27

50/60

12.25

12.5

6.75

21

KLCUL35A1

35

50/60

12.25

12.5

6.75

22

KLCUL45A1

45

50/60

12.25

12.5

6.75

22

KLCUL55A1

55

50/60

12.25

12.5

6.75

23

KLCUL80A2

80

50/60

19.13

15.5

15.5

60

KLCUL110A2

110

50/60

19.13

15.5

15.5

64

KLCUL130A2

130

50/60

19.13

15.5

15.5

70

KLCUL160A2

160

50/60

19.13

15.5

15.5

84

KLCUL200A3

200

50/60

22.13

20.5

24.37

108

KLCUL250A3

250

50/60

22.13

20.5

24.37

117

PENTEK Customer Hotline: 1-866-9PENTEK

P 8177 WS

accessories

Transducers, Leads & Repair Parts
Pentek Intellidrive Repair Parts
™

Model #

ITEM

DESCRIPTION

MANUFACTURER

PID-CON2

2-Pole Connector (Line In)

2-Pole Connector (Line In)

PENTEK

PID-Con3

3-Pole Connector (Line Out)

3-Pole Connector (Line Out)

PENTEK

PID-FAN

Replacement Fan

Replacement Fan

PENTEK

PID-HMI

Replacement Keypad

Replacement Keypad

PENTEK

U17-1561

Transducer (PID Control)

0 – 100 psig, 4~20ma, less lead

PENTEK

U18-1593R

Transducer Cable, for U17-1561

10 ft. – 18-gauge shielded

PENTEK

U18-1594R

Transducer Cable, for U17-1561

25 ft. – 18-gauge shielded

PENTEK

U18-1595R

Transducer Cable, for U17-1561

50 ft. – 18-gauge shielded

PENTEK

U18-1596R

Transducer Cable, for U17-1561

100 ft. – 18-gauge shielded

PENTEK

U18-1597R

Transducer Cable, for U17-1561

150 ft. – 18-gauge shielded

PENTEK

U18-1598R

Transducer Cable, for U17-1561

200 ft. – 18-gauge shielded

PENTEK

PPC3/PPC5 Repair Parts
Model #

ITEM

DESCRIPTION

MANUFACTURER

U17-1336

PPC3/PPC5 Control Panel (Keypad)

PPC3/PPC5 Control Panel (Keypad)

PENTEK

U97-188

Drive windows liGHt

Drive windows liGHt

PENTEK

U97-189

PPC5 jumper comb

PPC5 jumper comb

PENTEK

U97-190

PPC3 jumper comb

PPC3 jumper comb

PENTEK

U17-1329

Transducer

0-60 psig, 4~20ma, less lead

Turck

U17-1330

Transducer

0-100 psig, 4~20ma, less lead

Turck

U17-1331

Transducer

0-200 psig, 4~20ma, less lead

Turck

U17-1332

Transducer

0-500 psig, 4~20ma, less lead

Turck

U17-1333

Right Angle Lead, for U17-1329 to 1332

2-wire, 6.5 feet

Turck

U17-1334

Right Angle Lead, for U17-1329 to 1332

2-wire, 13.0 feet

Turck

U17-1335

Right Angle Lead, for U17-1329 to 1332

2-wire, 19.6 feet

Turck

PENTEK Customer Hotline: 1-866-9PENTEK

43

NOMENCLATURE

Nomenclature
4" Submersible Motors
Brand

P 42 B 0005 A 1

Motor Size

P – PENTEK

42 – Four Inch 2-Wire

®

Motor Material

A – Stainless Steel w/Cast Iron End Bells

43 – Four Inch 3-Wire

Horsepower

Frequency

Voltage / PH

0007 – 3/4 HP

B – 50 Hz

2 – 230V, 1 PH

0010 – 1 HP

C – 50/60 Hz

3 – 230V, 3 PH

0005 – 1/2 HP

B – All Stainless Steel

A – 60 Hz

1 – 115V, 1 PH

0015 – 1-1/2 HP

4 – 460V, 3 PH

0020 – 2 HP

5 – 575V, 3 PH

0030 – 3 HP

8 – 200V, 3 PH

0050 – 5 HP
0075 – 7-1/2 HP
0100 – 10 HP

6"-14"
Submersible Motors

®

6 HIT 2 - 15 - 1

MOTOR DIAMETER

HITACHI MOTOR

6
8
10
12
14

POLE

HIT/PM

PPC Model Number Key

SERIES
PPC5
PPC3

HORSEPOWER

2 = 2-POLE
4 = 4-POLE

15 = 15 HP

VOLTAGE/PH

1 - 230V, 1-PHASE
2 - 230V, 3-PHASE
4 - 460V, 3-PHASE
8 - 200V, 3-PHASE

PPC5-4-4A1-1
INPUT VOLTAGE

OUTPUT AMP RATING

ENCLOSURE RATING

4 – 460V, 3 PH

4A1 = 4.1 AMPS

12 (NEMA 12)

5 – 575V, 3 PH

(Amps A tenths)

2 – 230V, 3 PH

4A1

1 (NEMA 1)

The output current (or amps) of the PPC must be greater than or equal to the maximum rated motor current. Output of all drives is 3-phase power.

PENTEK INTELLIDRIVE

™

PID-50

SERIES

VOLTAGE

horsepower

ENCLOSURE Rating

PID

1-230V 1-Phase In/230V 3-Phase Out/1-Phase Out

50=5HP

3 (NEMA 3R)

Hitachi is a registered trademark of Hitachi Industrial Equipment Systems Co., Ltd.
®

44

PENTEK Customer Hotline: 1-866-9PENTEK

GLOBAL OPERATIONS

Global Operations
Pentair is the premier supplier of innovative products and systems used worldwide in the movement, treatment,
storage and enjoyment of SAFE, CLEAN WATER.
Pentair is operating in more than 50 locations worldwide, and is positioned to serve the global marketplace with
innovative products while improving life and industry.

Americas

Anaheim, CA
Ashland, OH
Aurora, IL
Brantford, Ontario
Brookfield, WI
Chardon, OH
Cypress, CA
Delavan, WI
Denham Springs, LA
Dover, NH
El Monte CA
Grand Island, NE
Hanover Park, IL
Kansas City, KS
Kitchener, Ontario
LaGrangeville, NY
Minneapolis, MN
Monterrey, Mexico
Moorpark, CA
New Brighton, MN
Reynosa, Mexico
Sanford, NC
Sheboygan, WI
South El Monte, CA
Union City, TN

Europe

Billingham, UK
Buc, France
Cambridge, UK
Colombes, France
Crawley, UK
Griesheim, Germany
Herentals, Belgium
Houilles, France
Montespertoli, Italy
Pisa, Italy
Pregnana, Italy

PENTEK Customer Hotline: 1-866-9PENTEK

International

Auckland, New Zealand
Goa, India
Johannesburg, S.A.
Melbourne, Australia
New Delhi, India
Santiago, Chile
Shanghai, China
Suzhou, China

45

This Page Intentionally Left Blank

46

PENTEK Customer Hotline: 1-866-9PENTEK

This Page Intentionally Left Blank

PENTEK Customer Hotline: 1-866-9PENTEK

47

PENTEK

®

293 Wright Street, Delavan, WI 53115 WWW.PUMPS.COM
PH: 866-9-PENTEK ORDERS FAX: 800-426-9446
Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.
© 2014 Pentair Ltd. All Rights Reserved.

P8063WS (04/08/14)



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2014:04:08 14:23:00-05:00
Creator                         : Adobe InDesign CS6 (Macintosh)
Modify Date                     : 2017:02:20 11:31:25-05:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2017:02:20 11:31:25-05:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:c27e79a1-7552-46e6-a0ce-762ecb8ed756
Original Document ID            : adobe:docid:indd:6b2b9641-cc55-11de-acbf-ee534b2eebfa
Document ID                     : xmp.id:B7524A913A206811822A8E3762B765B8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:B6524A913A206811822A8E3762B765B8
Derived From Document ID        : xmp.did:F9979710202068118083C123AF3E7B9F
Derived From Original Document ID: adobe:docid:indd:6b2b9641-cc55-11de-acbf-ee534b2eebfa
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2014:04:08 14:23-05:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 48

EXIF Metadata provided by EXIF.tools