TDS SCAVENGER USA 548554 1 ABS EJ 10W 2 Brochure
548862 1 Abs Scavenger Ej 10W-2 Brochure 548862_1_ABS Scavenger EJ 10W-2 Brochure
: Pump 548554 1 Abs Scavenger Ej 10W-2 Brochure 548554_1_ABS Scavenger EJ 10W-2 Brochure pdf
Open the PDF directly: View PDF .
Page Count: 8
Download | |
Open PDF In Browser | View PDF |
® ABS SCAVENGER SUBMERSIBLE EFFLUENT AND SEWAGE EJECTOR PUMPS 60 Hz Rugged Submersible pumps for residential and commercial applications. ABS submersible pumps series Scavenger are suitable for two main applications: • Effluent Models - used for both low and high pressure dosing systems and light duty industrial sumps. • Ejector Models - used for septic tanks and sewage systems, light agricultural usage and residential, industrial commercial light trash handling. 1/3, 4/10 & 1/2 HP • High torque capacitor motors. • 2" NTP vertical discharge, vortex impellers • Rugged cast iron housing • Stainless steel fasteners and motor shaft • Oil filled motors (non-toxic oil) • Integrated clip for float switch cable • Available with or without ABS piggyback float switch 3/4 HP & above • Unique triple seal design • ABS Patented ContraBlock® impeller with adjustable wear plate system, for clog-free operation • Single phase models through 5HP, Three phase models through 10HP • Discharges, 1 1/4 to 4” • Oil filled motors (non-toxic oil) • High torque capacitor start single phase motors • Rugged cast iron construction with stainless steel fasteners and motor shaft ® ABS SCAVENGER SUBMERSIBLE EFFLUENT AND SEWAGE EJECTOR PUMPS Limitations ® ABS SCAVENGER SUBMERSIBLE EFFLUENT AND SEWAGE EJECTOR PUMPS Effluent Pum ps M odel EF 03W EF 04W EF 05W EF 05W -1H EF 10W -1H EF 10W -2 EF 10D -2 EF 20D-2 HP Phase 0.3 0.4 0.5 0.5 1 1 1 2 1 1 1 1 1 1 3 3 RPM Voltage 3450 3450 3450 3450 3450 3450 3450 3450 115 115 115/208-230 115/208-230 208-230 208-230 208-230/460,575 208-230/460,575 RPM Voltage Discharge Am ps M ax Flow (feet) (gpm ) / 4” 37 40 50 73 108 73 73 85 40 80 88 44 44 160 160 175 21.6 28.6 35.8 68 70 72 57 68 Solids Size M ax Head M ax Flow W eight (feet) (gpm ) 18 24 24 24 30 30 37 37 30 100 140 200 200 240 240 300 300 265 31.9 35.2 77 70 77 70 90 84 77 30 35 35 45 45 44 44 50 50 46 46 57 57 52 52 67 61 70 265 300 300 320 320 330 330 450 450 525 525 470 470 550 550 525 600 620 70 90 84 90 84 90 84 147 143 154 150 161 154 165 158 161 165 170 3 2"NPT Vertical 2"NPT Vertical 2"NPT Vertical 1 1/4" Horiz. NPT 1 1/4" Horiz. NPT 2"NPT Vertical 2"NPT Vertical 2"NPT Vertical 7.2 9.1 13.2/6.6 15/7.5 13 13 5.8/2.9,2.3 7.6/3.8,3.0 M ax Head Solids Size / 4” 5/8” 5/8” 5/8” 5/8” 3 3 3 / 4” /4” W eight (Lbs.) Sewage Pumps M odel HP Phase EJ 04W EJ 05W EJ 07W EJ 07D EJ 10W -2 EJ 10D -2 EJ 15W -2 EJ 15D-2 EJ 10W -3 0.4 0.5 0.7 0.7 1 1 1.5 1.5 1 1 1 1 3 1 3 1 3 1 1750 1750 1750 1750 1750 1750 1750 1750 1750 EJ 10D-3 EJ 15W-3 EJ 15D-3 EJ 20W-2 EJ 20D-2 EJ 20W -3 EJ 20D -3 EJ 30W -3 EJ 30D-3 EJ 30W -4 EJ 30D-4 EJ 50W-3 EJ 50D-3 EJ 50W-4 EJ 50D-4 EJ 75D -3 EJ 75D -4 EJ 100D-4 1 1.5 1.5 2 2 2 2 3 3 3 3 5 5 5 5 7.5 7.5 10 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 3 3 3 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 1750 115 115/208-230 115/208-230 208-230/460,575 208-230 208-230/460,575 208-230 208-230/460,575 208-230 208-230/460,575 208-230 208-230/460,575 208-230 208-230/460,575 208-230 208-230/460,575 208-230 208-230/460,575 208-230 208-230/460,575 208-230 208-230/460,575 208-230 208-230/460,575 208-230/460,575 208-230/460,575 208-230/460,575 Discharge Am ps 6.6 10.6/4.9 13.8/6.9 5.0/2.5,2.0 10 5.0/2.5,2.0 15 7.0/3.5,2.8 10 5.0/2.5,2.0 15 7.0/3.5,2.8 19.0 9.0/4.5,3.6 19 9.0/4.5,3.6 23.0 13.0/6.5,5.2 23.0 13.0/6.5,5.2 27.0 19.0/9.5,7.6 27.0 19.0/9.5,7.6 23.0/11.5,9.2 23.0/11.5,9.2 28.0/14.0,11.2 2"NPT Vertical 2"NPT Vertical 2"Horiz. Flange* 2"Horiz. Flange* 2"Horiz. Flange* 2"Horiz. Flange* 2"Horiz. Flange* 2"Horiz. Flange* 3"Horiz. Flange 2" 2" 2" 2” 2” 2” 2” 2” 2 ½” 3"Horiz. Flange 3"Horiz. Flange 3"Horiz. Flange 2"Horiz. Flange* 2"Horiz. Flange* 3"Horiz. Flange 3"Horiz. Flange 3"Horiz. Flange 3"Horiz. Flange 4"Horiz. Flange 4"Horiz. Flange 3"Horiz. Flange 3"Horiz. Flange 4"Horiz. Flange 4"Horiz. Flange 3"Horiz. Flange 4"Horiz. Flange 4"Horiz. Flange 2 ½” 22" ½” 2 ½” 2” 2” 2 ½” 2 ½” 2 ½” 2 ½” 3” 3” 22" ½” 2 ½” 3” 3” 2 ½” 3” 3” (Lbs.) *includes elbow to convert to 2" Vertical NPT Motor Identification Code Materials of construction Motor Standard Seal chamber Cast iron ASTM A-48 Class 35B (GG 25) Motor housing Cast iron ASTM A-48 Class 35B (GG 25) Motor shaft Stainless steel AISI 420 (1.4021) Fasteners (medium contact) Stainless steel AISI 304 (1.4301) Hydraulics Standard Volute Impeller Bottom plate Pedestal Fasteners Cast iron ASTM A-48 Class 35B (GG 25) Cast iron ASTM A-48 Class 40 (GG 25), Polybutylene Terephthalate (PBT) with 30% of glass fiber on small pumps (EF 03/04/05 and EJ 04/05) Standard and option Description Protection type Max. ambient temperature Main voltage Voltage tolerance Insulation class Approval Cast iron ASTM A-48 Class 35B (GG 25) Cables Cast iron ASTM A-48 Class 35B (GG 25) Cable length Stainless steel AISI 304 (1.4301) Mechanical Seal Standard Option IP 68 - 40°C (104°F) - 115, 208-230, 460 and 575V - +-10% - B or F depending on model - CSA(U) - SEOOW, SJEOOW, SJTOW - 20' On request Double – Carbon/Ceramic SiC/SiC The Scavenger Triple Seal System Motor Chamber This ABS exclusive design provides three levels of sealing for outstanding reliability. A double mechanical seal located inside the oil chamber provides two full levels of sealing. An additional V-Ring type lip seal between the oil chamber and pump volute provides a third extra larger level of sealing, and enhanced mechanical seal protection. Heavy Duty Lower Ball Bearing Secondary Mechanical Seal Oil Chamber Primary Mechanical Seal V-Ring Lip Seal for Third Level of Seal protection Stainless Steel Motor Shaft **The Scavenger Triple Seal System is only available on scavengers ¾ hp and above. Impeller ABS Monitoring System Scavenger 3HP - 10HP includes the ABS Monitoring System.This system provides normally closed thermal overload switched in the motor winding, and the ABS Sealminder moisure detection probe in the mechanical seal chamber. Wires for the sensors emerge from the pump in a separate control cable. These wires must be connected to the control panel for sensor operation (ABS Sealminder relay required in the panel for moisure detection alarm). Effluent Pum ps 1 1/4 Inch Transportable Installation Type Weight Wet-well Installation Type (lb) Weight (lb) EF 05W - 1H 68 EF 05W - 1H 68 EF 10W - 1H 68 EF 10W - 1H 68 Effluent Pum ps 2 Inch Transportable Installation Type Weight Type 22 Weight H Type (lb) mm (in) EF 04W - 2 28.6 312 (12.3") EF 10D - 2 EF 05W - 2 35.8 337 (13.3") (lb) EF 03W - 2 Sewage Ejectors 2 Inch Transportable Installation Type Weight H B C D (lb) mm (in) mm (in) mm (in) mm (in) EJ 04W - 2 31.9 377 (14.9") 170 (6.7") 251 (9.9") 80 (3.15") EJ 05W - 2 35.2 402 (15.8") 187 (7.4") 263 (10.4") 94 (3.70") Type Weight H (lb) mm (in) EJ 07W - 2 77 487 (19.3") EJ 10W - 2 77 487 (19.3") EJ 15W - 2 90 532 (21") EJ 20W - 2 90 532 (21") EJ 07D - 2 70.4 468 (18.4") EJ 10D - 2 70.4 468 (18.4") EJ 15D - 2 83.6 513 (20.2") EJ 20D - 2 83.6 513 (20.2") Weight H (lb) mm (in) 57 401 (15.8") EF 10W - 2 62 420 (16.5") EF 10W - 2 68 464 (18.3") Sewage Ejectors 2x3 Inch Transportable Installation Type Wet-well Installation H Weight (lb) mm (in) EJ 07W - 2 77 487 (19.2") EJ 10W - 2 77 487 (19.2") EJ 15W - 2 90 532 (21") EJ 20W - 2 90 532 (21") EJ 07D - 2 70.4 468 (18.4") EJ 10D - 2 70.4 468 (18.4") EJ 15D - 2 83.6 513 (20.2") EJ 20D - 2 83.6 513 (20.2") Sewage Ejectors 3 Inch Transportable Installation Type Weight H (lb) mm (in) EJ 10W - 3 77 EJ 15W - 3 90.2 EJ 20W - 3 90.2 509 (20") 553 (21.8") 553 (21.8") EJ 10D - 3 70.4 485 (19") EJ 15D - 3 83.6 534 (21") EJ 20D - 3 83.6 534 (21") Wet-well Installation Sewage Ejectors 3 Inch Transportable Installation Type Weight H (lb) mm (in) EJ 30W - 3 147.4 685 (27") EJ 50W - 3 160.6 685 (27") EJ 30D - 3 154 665 (26.2") EJ 50D - 3 160.6 685 (27") EJ 75D - 3 138.6 685 (27") Sewage Ejectors 4 Inch Transportable Installation Type EJ 30W - 4 Weight H (lb) mm (in) 154 685 (27") EJ 50W - 4 165 685 (27") EJ 30D - 4 149.6 665 (26.2") EJ 50D - 4 158.4 685 (27") EJ 75D - 4 165 685 (27") EJ 100D - 4 165 685 (27") Wet-well Installation Sewage Ejectors 4 Inch Wet-well Installation Weight H (lb) mm (in) EJ 30W - 4 154 685 (27") EJ 50W - 4 165 685 (27") EJ 30D - 4 149.6 685 (27") EJ 50D - 4 158.4 685 (27") EJ 75D - 4 165 685 (27") EJ 100D - 4 165 685 (27") Type Corporate office: ABS USA 140 Pond View Drive Meriden, CT 06450 Tel (203) 238-2700 Fax (203) 238-0738 Regional offices: Southeast Region 111 Maritime Drive Sanford, FL 32771 Tel (407) 330-3456 Fax (407) 330-3404 ABS Canada 1401 Meyerside Drive, Unit #2 Mississauga, Ontario L5T 1 G8 Tel (905) 670-4677 Fax (905) 670-3709
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Contreras, Juan Manuel Create Date : 2010:08:05 13:21:12-03:00 Modify Date : 2017:03:21 11:48:03-04:00 XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Format : application/pdf Creator : Contreras, Juan Manuel Title : TDS - SCAVENGER - USA Creator Tool : CorelDRAW Metadata Date : 2017:03:21 11:48:03-04:00 Producer : Corel PDF Engine Version 14.0.0.701 Document ID : uuid:1acb7512-615b-4f6a-9187-d1f1160ccc2f Instance ID : uuid:e1f8e31d-3525-422c-a1c1-7c2d97a9d583 Page Count : 8EXIF Metadata provided by EXIF.tools