551084 1 A.Y. Mc Donald Engine Driven Dewatering Pump Brochure

551083 1 A.Y. Mcdonald Engine Driven Dewatering Pump Brochure 551083_1_A.Y. McDonald Engine Driven Dewatering Pump Brochure

551086 1 A.Y. Mcdonald Engine Driven Dewatering Pump Thermoplastic Construction Brochure 551086_1_A.Y. McDonald Engine Driven Dewatering Pump Thermoplastic Construction Brochure

: Pump 551084 1 A.Y. Mcdonald Engine Driven Dewatering Pump Brochure 551084_1_A.Y. McDonald Engine Driven Dewatering Pump Brochure pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

Dewatering Pumps
Electric & DC Powered | Engine Driven
Cast Iron | Thermoplastic
SUBMITTAL DATA SHEET
The A.Y. McDonald line of engine driven dewatering pumps offer economy, durability, portability and performance all in one neat
package. Pump construction materials range from cast iron featuring dual volute design that reduces radial load on engine to corrosion
resistant thermoplastic components featuring removable/replaceable volutes, impellers and wearplates. A.Y. McDonald Engine Driven
Dewatering pumps are reliable, cost effective, and low maintenance.
Applications
Ideal for general purpose dewatering, irrigation, spraying, washdown, and agricultural applications. For use with non-ammable liquids
which are compatible with pump component materials.
NO-LEAD: The weighted average of the wetted surface of this no-lead product contacted by consumable water contains less than one quarter of
one percent (0.25%) lead.
A.Y. McDonald considers the information on this assembly drawing correct when published. Item and option availability, including specications, are subject to change without notice.
Submitted by: 10-16
A.Y. McDonald Mfg. Co. Toll Free: 1-800-292-2737 sales@aymcdonald.com
P.O. Box 508 Fax: 1-800-832-9296 www.aymcdonald.com
Dubuque, IA 52004-0508 Hours: 7:00 a.m. - 5:00 p.m., CST
- Cast iron or thermoplastic construction
- Briggs & Stratton or Honda engines
- Buna-N mechanical seal
- 2” NPT port sizes
- Self-priming up to 20’
- Semi-open, clog resistant impellers
- Available in 3 1/2 and 5 1/2 HP engines
- Pumps include carrying handle
- Solids Handling - 3/8” - 7/16” diameter
- Built-in apper / check valve
- Two NPT pipe nipples
- Maximum working pressure 60 psi
SUBMITTAL INFORMATION
P1 of 2
2” Dewatering pump
Cast iron housing 2” Thermoplastic
housing
A
130
120
110
100
90
80
70
60
50
40
30
20
10
B
D
C
E
CAPACITY IN US GALLONS PER MINUTE @ 3600 RPM
*CONVERT TO PSI, DIVIDE BY 2.31 | LIQUID WATER SPECIFIC GRAVITY 1.0
TOTAL HEAD IN FEET*
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
Cast Iron Models
A = 02G3AC 3.5 HP
B = 02G5AC 5.5 HP
Thermoplastic Models
C = 02G3AT 3.5 HP
D = 02G5AT 4 HP
E = 02G5HT 5 HP
Model No. HP✝ A XA CP** E XH O X Y Z Suct Disch.
02G3AT 3.5 16.5 7.3 17.8 3.6 .44 X .64 13.2 4.8 2.8 5.5 2" 2"
02G5AT 5.5 16.5 7.3 17.8 3.6 .44 X .64 13.2 4.8 2.8 5.5 2" 2"
02G5HT 5 16.5 7.3 17.8 3.6 .44 X .64 13.2 4.8 2.8 5.5 2” 2”
02G3AC 3.5 17.4 8.4 17.6 4.2 .40 X .40 16.1 6.8 4.4 4.9 2" 2"
02G5AC 5.5 17.4 8.4 17.6 4.2 .40 X .40 16.1 6.8 4.4 4.9 2" 2"
Dimensions
Dewatering Pumps
Electric & DC Powered | Engine Driven
Cast Iron | Thermoplastic
SUBMITTAL DATA SHEET
NO-LEAD: The weighted average of the wetted surface of this no-lead product contacted by consumable water contains less than one quarter of
one percent (0.25%) lead.
A.Y. McDonald considers the information on this assembly drawing correct when published. Item and option availability, including specications, are subject to change without notice.
Submitted by: 10-16
A.Y. McDonald Mfg. Co. Toll Free: 1-800-292-2737 sales@aymcdonald.com
P.O. Box 508 Fax: 1-800-832-9296 www.aymcdonald.com
Dubuque, IA 52004-0508 Hours: 7:00 a.m. - 5:00 p.m., CST
P2 of 2
2” Dewatering pump
Cast iron housing 2” Thermoplastic
housing
Dimensions:
Inches
Ship Shaft Tank Size
Model # WT. (Ibs.) Driver Type & HP Seal (Qts.) Run Time
02G3AC 65 B&S 525, 3.5 HP Buna 3 180 min.
02G5AC 76 B&S CP650, 5.5 HP Buna 3 90 min.
Ship Shaft Tank Size
Model # WT. (Ibs.) Driver Type & HP Seal (Qts.) Run Time
02G3AT 38 B&S 525, 3.5 HP Buna 3 180 min.
02G5AT 43 B&S CP550, 4 HP Buna 3 90 min.
02G5HT 45 Honda GC160, 5 HP Buna 1.8 60 min.
Features
- Cast iron construction, & impeller
- Solids Handling - 3/8” diameter
- Stainless steel shaft sleeve
- Steel base on cast iron models
- Maximum temperature 180°F
- Dual volute design
- Fiber Gasket Casing Seal
- Delivers up to 52 PSI and maximum 140 GPM
- Optional Viton® or silicon carbide mechanical seals
Features
- Thermoplastic construction
- Polypropylene impeller
- Solids Handling - 7/16” diameter
- O-ring casing seal
- Replaceable volute
- Maximum temperature 130°F
- Delivers up to 54 PSI and maximum 140 GPM
- Optional EPDM mechanical seals available
WARNING: Do not use in explosive atmosphere or for pumping volatile ammable liquids.
2” Dewatering Pumps | Cast Iron
2” Dewatering Pumps | Thermoplastic

Navigation menu