File 79531 1 B&G Product Brochure
: Pump 79531 1 B&G Product Brochure 79531_1_B&G Product Brochure pdf
Open the PDF directly: View PDF .
Page Count: 2
Download | ![]() |
Open PDF In Browser | View PDF |
SUBMITTAL A-545B JOB: REPRESENTATIVE: UNIT TAG: ORDER NO. DATE: ENGINEER: SUBMITTED BY: DATE: CONTRACTOR: DATE: APPROVED BY: Circuit Setter Calibrated Balance Valves with Flanged Connections DESCRIPTION The Bell & Gossett Circuit Setter calibrated balance valve is a precision machined triple purpose balancing instrument. It is precisely calibrated for use as a presettable balance valve, variable orifice flow meter and positive shut-off service valve. Valves are furnished with a calibrated nameplate and memory stop indicator which permits the value to be preset to a fixed open position and then closed for service without disturbing valve setting. Valves are equipped with capped readout valves fitted with internal check valves. Sizes 2-1/2"-4" (brass ball) include a 1/4" NPT tapped and plugged drain port as standard. MAXIMUM OPERATING TEMPERATURE 250°F (121°C) MAXIMUM WORKING PRESSURE 175 PSIG (1207 kPa) CONSTRUCTION Sizes 2-1/2"-4" Body: Cast Iron Ball: Brass Seat Rings: Glass and carbon filled TFE Readout Valves: Brass with EPT check valve Stem "O" Ring: EPDM Sizes 4"-12" Body & Bonnet - Flanged: Cast Iron Disc: Brass with EPDM insert Stern: Stainless Steel Packing: Teflon-Graphite (Asbestos-Free) Gasket: Synthetic Fiber - Nitrile Binder (Asbestos-Free) Seal Ring: EPDM Bushing: Zinc Plated Steel TYPICAL SPECIFICATION Furnish and install as shown on plans and with manufacturer's recommendations Model CB calibrated balance valves. PRE-SET BALANCE FEATURE Valves to be designed to allow installing contractor to pre-set balance points for proportional system balance prior to system start-up in accordance with pre-set balance schedule. VALVE DESIGN AND CONSTRUCTION Valves shall be of heavy-duty cast iron {flanged} construction with 125 psi ANSI flange _____ connections suitable up to 175 psi working pressure. Valves 2-1/2" - 4" pipe shall have a brass ball with glass and carbon filled TFE seat rings. valves 4" - 12" shall be fitted with a bronze seat, replaceable bronze disc with EPDM seal insert, and stainless steel stem. DESIGN PRESSURE/TEMPERATURE 175 psig at 250°F All balance valves to be ITT Bell & Gossett Model No. CB-__________ (note sizes) IMPORTANT When monitoring system flow care must be exercised to avoid direct skin or eye contact with liquids that may escape. Liquids with temperatures in excess of 120°F (49°C) may cause burns. Bell & Gossett Circuit Setter Balance Valves are not recommended for use with meter connections pointing downward. To retain calibrated accuracy, a minimum length of unrestricted straight pipe adjacent to the valve should be maintained as follows: SIZE INCHES (mm) 2-1/2"-4" (63.5-101.6) 4"-12" (63.5-304.8) UPSTREAM "A" (In Pipe Diameters) DOWNSTREAM "B" (In Pipe Diameters) 3 1 5 2 Best use results maximize straight pipe length entering and leaving valve. Obstructions or changes in planar flow profiles entering valve may affect accuracy if too close to valve. © COPYRIGHT 2009 ITT Corporation Bell & Gossett CIRCUIT SETTER CALIBRATED BALANCE VALVES DIMENSIONS AND WEIGHTS * MODEL NO. CB−2-1/2F CB−3F CB−4 CB−4F CB−5F CB−6F CB−8F CB−10F CB−12F PIPE SIZE 2-1/2 (63.5) 3 (76.2) 4 (101.6) 4 (101.6) 5 (127) 6 (152.4) 8 (203.2) 10 (254) 12 (304.8) DIMENSIONS IN INCHES (MM) A CLOSED CONNS. OPEN FLGD. − − FLGD. − − − − 16-7/8 (428.6) 18-1/2 (470.0) 20-3/4 (527.1) 24-3/4 (628.7) 28-7/8 (733.4) 33-1/2 (851.0) 15-7/8 (403.2) 17-1/4 (438.2) 19-1/4 (489.0) 23-1/4 (590.6) 26-1/2 (673.1) 31-1/8 (790.6) FLGD. FLGD. FLGD. FLGD. FLGD. FLGD. FLGD. A-545B D B 6-9/16 (166.7) 6-13/16 (173.0) 8 (203.2) 14-1/2 (368.3) 16 (406.4) 18 (457.2) 21-1/2 (546.1) 25-1/2 (647.7) 30 (762.0) C OPEN CLOSED E − − − − − − − − − − − − 4-1/2 (114.3) 5 (127.0) 5-1/2 (139.7) 6-3/4 (171.5) 8 (203.2) 9-1/2 (241.3) 15-11/16 (398.5) 16-27/32 (427.8) 19-1/8 (485.8) 22-3/8 (568.3) 26 (660.4) 29-11/16 (754.1) 13-15/16 (354.0) 15-1/16 (382.6) 17 (431.8) 20-5/16 (516.0) 23-3/16 (589.0) 26-9/16 (674.7) 6-1/4 (158.8) 6-7/8 (174.6) 8-1/4 (209.6) 10-3/8 (263.5) 12-1/4 (311.2) 14-1/2 (368.3) F 7 (177.8) 7-1/2 (190.5) 9 (228.6) − − − − − − MAX. WIDTH OF VALVE − − − 9 (228.6) 10 (254.0) 11 (279.4) 14-1/4 (362.0) 17 (431.8) 20 (508) WEIGHT IN LBS. (Kg) 23 (10.4) 29 (13.2) 41 (18.5) 94 (43) 114 (52) 186 (85) 316 (144) 458 (208) 662 (301) All Dimensions +/- 0.125" (3.2 mm) tolerance. Dimensions are subjected to change. Not to be used in construction purposes unless certified. SCHEDULE MODEL NO. CB−2-1/2F CB−3F CB−4 CB−4F CB−5F CB−6F CB−8F CB−10F CB−12F ITT 8200 N. Austin Avenue Morton Grove, IL 60053 Phone (847)966-3700 Facsimile (847)966-9052 www.bellgossett.com PART NO. 117116 117117 117035 117470 117471 117472 117473 117474 117475 TAGGING INFORMATION QUANTITY
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Title : file://C:\Program Files\Esp\ESPREP\Projects\Allergan_Unit_Dose_ Author : Mrondla Creator : pdfFactory www.pdffactory.com Producer : pdfFactory 2.51 (Windows XP Professional) Create Date : 2009:11:09 14:14:43-06:00 Page Count : 2EXIF Metadata provided by EXIF.tools