PartsManual 85325 3 Briggs & Stratton 40336 Parts
: Pump 85325 3 Briggs & Stratton 40336 Parts 85325_3_Briggs & Stratton 40336 Parts pdf
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
Illustrated Parts List N o R tf ep o r ro du ct io n MODEL 040336-00 20,000 Watt Home Generator System Manual Part No. 31900 Revision A Rev. Date: 2/5/2013 n N o R tf ep o r ro du ct io Table Of Contents PRODUCT COMPONENTS PAGES Main Unit .............................................................................................................................................................. 4 Alternator .............................................................................................................................................................. 6 Control Panel ....................................................................................................................................................... 8 Enclosure ............................................................................................................................................................. 10 N o R tf ep o r ro du ct io n Torque Specification Chart ............................................................................. Inside Back Cover Exploded View - Main Unit NOTE: Unless noted otherwise, use the standard hardware torque specification chart. N o R tf ep o r ro du ct io n 318925 The above parts group applies to the following Mfg. Nos.: 040336-00 - 20,000 Watt BSPP Home Generator System Briggs & Stratton Power Products Group, LLC Copyright © 2013 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved 4 319002 Parts List - Main Unit Ref. Part No. Description 1 2 3 4 5 6 B314636GS B198896GS 187594GS ----24910GS ----- BASE BRACKET MOUNT, Vibration * CAPSCREW, Hex Head, 5/16-18 x 2-1/2 SCREW * WASHER, Flat, M8 45 46 47 48 49 50 195235GS 312781GS 318459GS 691656 206976GS 318880GS Description ADAPTER, Engine ELBOW FITTING SOLENOID, Starter FITTING SOLENOID 7 8 9 10 11 12 13 14 15 16 17 18 ------------------------316188GS 316961GS 314628GS ----B4300GS 314629GS * WASHER, Lock, M8 * NUT, 5/16-18 * WASHER, Flat, M10 * WASHER, Lock, 3/8 * CAPSCREW, Hex Head, 3/8-16 x 1 * CAPSCREW, Hex Head, 5/16-18 x 3/4 HARNESS WIRE, Ground Relay DUCT * SCREW, M5-0.8 x 10 BOLT BRACKET 51 52 53 54 55 56 57 58 59 65 314662GS 314693GS 845702 ----845046GS 318002GS --------318449GS 703877 19 20 21 22 23 24 314641GS 204426GS 47411GS ----313561GS ----- WIRE, Ground SWITCH, Temp CAPSCREW, Hex Head, M6-1.0 x 16 * WASHER, Lock, 1/4 PLATE, Switch * WASHER, Shakeproof, #4 900 --- ----317247GS 317246GS TUBE FITTING, Barb VALVE, LP/NG Switch * CAPSCREW, Hex Head, M6-1.0 x 30 REGULATOR FITTING * NUT, 1/4-20 * NUT, Hex, M6-1 DECAL SHEET, Warnings FUEL REGULATOR ASSEMBLY (Includes Ref. Nos. 46, 47, 49, 52, 53, 55 & 56) ** ENGINE MANUAL, Install (Not Illustrated) MANUAL, Operator (Not Illustrated) ----- 318937GS 318973GS 311713GS 203374GS 25 26 27 -28 29 186242GS 1723165SM 314637GS 318449GS 318449GS 194561GS SCREW HOSE, Oil HARNESS, Wiring DECAL SHEET, Warnings DECAL SHEET, Warnings SCREW -- 195200GS -- 203417GS 30 31 32 33 34 35 36 37 38 39 40 41 317479GS 317255GS ----317324GS 317323GS ----317480GS 315454GS 314642GS 314640GS 314663GS 809872 STEPPER MOTOR BRACKET * CAPSCREW, Hex Head, M3-0.5 x 6 ARM, Link ROD * CAPSCREW, Hex Head, M3-0.5 x 8 HARNESS, Wiring SEAL SNORKEL WIRE, Battery, Ground MUFFLER GASKET ---- 314941GS 6036 6229 -- 6231 -- 6254 42 43 44 845699 ----23645GS CLEVIS * SCREW, M8 x 25 SCREW KIT, Manual, Acc. (Not Illustrated) KIT, Hardware (Not Illustrated) HOSE, Flex (Not Illustrated) PAINT, Touch Up, CNTNM Charcoal (Not Illustrated) HANG TAG, Attn. Standby Equipment (Not Illustrated) PAINT, Spray, CNTNM Charcoal (Optional Accessory) BATTERY WARMER (Optional Accessory) KIT, Maintenance (Optional Accessory) KIT, Wireless Monitor (Optional Accessory) N o R tf ep o r ro du ct io n Ref. Part No. KIT, Cold Weather (Includes Battery & Oil Warmers) (Optional Accessory) KIT, Oil Warmers (Optional Accessory) Footnotes * Items without part numbers are common fasteners and are available at your local hardware store. The above parts group applies to the following Mfg. Nos.: 040336-00 - 20,000 Watt BSPP Home Generator System Briggs & Stratton Power Products Group, LLC Copyright © 2013 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved 5 319002 Exploded View - Alternator NOTE: Unless noted otherwise, use the standard hardware torque specification chart. N o R tf ep o r ro du ct io n 318313 The above parts group applies to the following Mfg. Nos.: 040336-00 - 20,000 Watt BSPP Home Generator System Briggs & Stratton Power Products Group, LLC Copyright © 2013 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved 6 319002 Parts List - Alternator Description 1 2 3 4 5 6 195235GS 314664GS 314666GS 195234GS 315199GS 66386GS ADAPTER, Engine ROTOR STATOR RBC SCREW BRUSH ASSEMBLY 7 8 9 10 11 66849GS 203200GS 315204GS 199888GS 315440GS TAPTITE WASHER BOLT O-RING GROMMET Ref. Part No. Description N o R tf ep o r ro du ct io n Ref. Part No. Footnotes The above parts group applies to the following Mfg. Nos.: 040336-00 - 20,000 Watt BSPP Home Generator System Briggs & Stratton Power Products Group, LLC Copyright © 2013 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved 7 319002 Exploded View - Control Panel NOTE: Unless noted otherwise, use the standard hardware torque specification chart. N o R tf ep o r ro du ct io n 318322 The above parts group applies to the following Mfg. Nos.: 040336-00 - 20,000 Watt BSPP Home Generator System Briggs & Stratton Power Products Group, LLC Copyright © 2013 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved 8 319002 Parts List - Control Panel 314631GS 316948GS 316205GS 205479GS ----319009GS BOX, Control SEAL SEAL REGULATOR, Voltage * BOLT, Hex Head, #10-32 x 3/8 DOOR, Access 7 8 9 10 11 12 13 14 15 16 17 18 314632GS ----314639GS 318449GS 314633GS 317371GS ----317368GS 192770GS 208365GS 313585GS 311318GS BRACKET * SCREW, #10-32 x 3/8 HARNESS DECAL SHEET, Warnings BRACKET DECAL * SCREW, M2.5-0.45 x 8 DECAL BRACKET TERMINAL BLOCK DECAL BREAKER, Circuit 19 20 21 22 23 24 ----------------315423GS 199011GS * SCREW, #10-32 x 3/4 * NUT, 1/4-20 * CAPSCREW, Hex Head, 1/4-20 x .75 * WASHER, External Lock, M6 CONTROL PANEL LUG 25 26 27 28 -- B314635GS 318449GS 318449GS 318449GS 198573GS COVER, Control Panel Box DECAL SHEET, Warnings DECAL SHEET, Warnings DECAL SHEET, Warnings FUSE (Not Illustrated) Ref. Part No. Description n Description 1 2 3 4 5 6 N o R tf ep o r ro du ct io Ref. Part No. Footnotes * Items without part numbers are common fasteners and are available at your local hardware store. The above parts group applies to the following Mfg. Nos.: 040336-00 - 20,000 Watt BSPP Home Generator System Briggs & Stratton Power Products Group, LLC Copyright © 2013 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved 9 319002 Exploded View - Enclosure NOTE: Unless noted otherwise, use the standard hardware torque specification chart. N o R tf ep o r ro du ct io n 317251 The above parts group applies to the following Mfg. Nos.: 040336-00 - 20,000 Watt BSPP Home Generator System Briggs & Stratton Power Products Group, LLC Copyright © 2013 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved 10 319002 Parts List - Enclosure B314636GS AR314645GS 314638GS 315447GS 318243GS ----- BASE PANEL, End, Left SUPPORT, Rail INSULATION PANEL, Front * WASHER, External Lock, M6 7 8 9 10 11 12 13 14 15 16 17 18 ----314619GS 314290GS B4300GS 315443GS 315453GS AR314694GS 315452GS 318235GS 318449GS 317921GS ----- * CAPSCREW, Hex Head, 1/4-20 x 3/4 LATCH KEY, Latch BOLT LATCH, Arm INSULATION PANEL, End, Right INSULATION ROOF DECAL SHEET, Warnings DECAL * NUT, Flange, 1/4-20 19 20 21 22 23 24 311644GS 316954GS AR314651GS AR314681GS 314652GS 314647GS SCREW TRIM PANEL, Back PANEL, Corner SUPPORT-RAIL BRACKET, Roof Support 25 26 27 28 29 30 AR314644GS 314646GS 314649GS 314672GS 314679GS 314625GS PANEL, Corner BRACE SPRING BRACE BRACKET, Roof Support SUPPORT 31 32 33 34 35 36 37 38 39 40 41 42 314684GS 314661GS 314682GS 311692GS ----314626GS 315454GS 314624GS 314620GS 318449GS 314621GS 314699GS PANEL, Intake, Alternator CLIP SEAL SEAL * WASHER, Flat, M8 DUCT, Alternator SEAL PANEL, Muffler PANEL, Muffler, Bottom DECAL SHEET, Warnings PANEL, Muffler, Top DEFLECTOR, Muffler 43 44 45 317254GS 316951GS 314683GS DEFLECTOR, Exhaust SEAL PANEL, Intake, Engine Ref. Part No. 46 47 48 49 50 51 -- 316202GS 318449GS 198460GS 194561GS 316194GS 315444GS 316193GS Description TRIM DECAL SHEET, Warnings PLUG SCREW SCREEN SUPPORT PLUG, Roof (Not Illustrated) n Description 1 2 3 4 5 6 N o R tf ep o r ro du ct io Ref. Part No. Footnotes * Items without part numbers are common fasteners and are available at your local hardware store. The above parts group applies to the following Mfg. Nos.: 040336-00 - 20,000 Watt BSPP Home Generator System Briggs & Stratton Power Products Group, LLC Copyright © 2013 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved 11 319002 n N o R tf ep o r ro du ct io n N o R tf ep o r ro du ct io n N o R tf ep o r ro du ct io Hardware Identification & Torque Specifications Torque Specification Chart Torque Specification Chart FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%) 5.6 8.8 Class 5.6 10.9 Class 10.9 Class 8.8 SAE Grade 2 Class 12.9 Size Of Hardware Nm. in/lbs ft/lbs Nm. in/lbs ft/lbs Nm. in/lbs ft/lbs Nm. M3 M4 M5 M6 M7 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 .56 1.28 2.50 4.3 7.1 10.5 21 36 58 88 121 171 230 295 435 590 800 1030 1340 13.44 30.72 60.96 7.3 12.1 17.7 35 61 101 147 202 290 390 497 733 995 1349 1740 2249 1.28 19.2 2.90 43.44 5.75 5.97 9.9 10.3 16.5 16.9 25 24 50 48 83 86.2 136 132 210 200 287 275 405 390 559 530 708 375 995 1032 1350 1401 1830 1902 2360 2441 3050 3163 1.80 4.10 8.10 14 23 34 67 117 185 285 390 550 745 960 1400 1900 2580 3310 4290 22.92 52.56 7.15 12.1 19.9 29 59 103 162 250 346 486 656 840 1239 1681 2278 2935 3798 2.15 4.95 9.7 16.5 27 40 81 140 220 340 470 660 890 1140 1680 2280 3090 3980 5150 8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 9/16-12 9/16-18 5/8-11 5/8-18 3/4-10 3/4-16 7/8-9 7/8-14 1-8 1-12 The guides and ruler furnished below are designed to help you select the appropriate hardware. 0 20 10 30 40 50 60 80 70 90 Body Diameter Screw, M8- 1.25 x 25 Thread Diameter (mm) Threads Inside Diameter (in) per inch 1/4 1/2 2.1 2.3 3.1 3.5 7.6 8.6 15.0 16.3 27.2 31.3 40.8 47.6 68.0 74.8 88.4 102.0 122.4 136 217.6 244.8 190.4 210.8 299.2 326.4 Body Length (mm) Body Length (in) in/lbs ft/lbs 30 31 43 49 8 10 17 19 30 35 50 55 75 90 110 120 150 180 260 300 400 440 580 640 SAE Grade 8 Nm. in/lbs ft/lbs Nm. 3.4 3.5 4.9 5.5 10.9 13.6 23.1 25.8 40.8 47.6 68.0 74.8 102.0 122.4 149.6 163.2 204.0 244.8 353.6 408.0 544.0 598.4 788.8 870.4 41 43 60 68 12 14 25 29 45 50 70 80 110 120 150 170 220 240 386 420 600 660 900 1,000 4.6 4.9 6.8 7.7 16.3 19.0 34.0 34.0 61.2 68.0 95.2 108.8 149.6 163.2 204.0 231.2 299.2 326.4 525.0 571.2 816.0 897.6 1,244.0 1,360.0 NOTES 1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques. b. for flange whizlock nuts and screws - use 135% of grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque values must meet this specification. Screw, 1/2- 16 x 2 1 3/4 Distance between threads (mm) Threads per inch Thread Diameter (mm) Body Diameter Nut, 1/2-16 0 19 20 27 31 66 76 11 12 20 23 30 35 50 55 65 75 90 100 160 180 140 155 220 240 SAE Grade 5 Nm. 100 Body Length Nut, M8 in/lbs ft/lbs N o R tf ep o r ro du ct io in/lbs Size Of Hardware ft/lbs 5.88 13.44 26.4 44.64 5.2 7.7 15 26 42 64 89 126 169 217 320 435 590 759 988 No Marks Hardware Grade 12.9 n Property Class FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) 1/4 1/2 2 3/4 1/4 1/2 3 3/4 1/4 1/2 4 Common Hardware Types 3/4 Hex Head Capscrew Washer Standard Hardware Sizing When a washer or nut is identified as 1/2” (M8), this is the Nominal size, meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a second number is present it represents the threads per inch (distance between threads). When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50 ), this means the Nominal size, or body diameter is 1/2 inch (8mm metric thread diameter), the second number,16, represents the threads per inch, (1.25 thread diameter). The final number is the body length of the bolt or screw, 2 inches (50mm). Lockwasher Carriage Bolt Hex Nut Wrench & Fastener Size Guide 1/4” Bolt or Nut Wrench—7/16” 5/16” Bolt or Nut Wrench—1/2” 3/8” Bolt or Nut Wrench—9/16” M6 Bolt or Nut Wrench—10mm M8 Bolt or Nut Wrench—13mm M10 Bolt or Nut Wrench—17mm 7/16” Bolt or Nut 1/2” Bolt or Nut Wrench (Bolt)—5/8” Wrench—3/4” Wrench (Nut)—11/16” M12 Bolt or Nut Wrench—19mm M14 Bolt or Nut Wrench—22 mm n N o R tf ep o r ro du ct io Briggs & Stratton Power Products Group, LLC Copyright© 2013 Briggs & Stratton Power Products Group, LLC. All rights reserved. No part of this page can be reproduced or transmitted in any form by any means without the express written permission of Briggs & Stratton Power Products Group, LLC.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract Author : 46967 Create Date : 2013:02:05 11:29:47-06:00 Modify Date : 2013:02:05 11:59:59-06:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : PartsManual Creator : 46967 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2013:02:05 11:59:59-06:00 Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:0138ff65-d50e-4493-a990-5efdfd595436 Instance ID : uuid:bf331b08-4e1a-4116-8eee-b0383fa279f6 Page Layout : TwoColumnRight Page Mode : UseThumbs Page Count : 16EXIF Metadata provided by EXIF.tools