Q Global Solutions PERPETUAL0904 Parking System User Manual perpetual manual EN
Q Global Solutions (Xiamen) Electronics Corp. Parking System perpetual manual EN
User Manual
Owner’s Manual of Perpetual System Thanks for your purchase of our flexible, user’s friendly and most sophisticated perpetual system. Perpetual has the system with or without RF modules. It is a durable water-proofed system. Its Control Box could stand harsh weather, extreme temperature and rough working environment. The system’s main components Its main components of the perpetual system are 1 control module, 1 power extension harness, 4 digital sensors, 4 extension sensor-cables in a slit loom, 1 Dome Buzzer extension power line, 1 Dome Buzzer with built-in latch-relay function, 1 LED,1 momentary switch and 1 set of hardware kit. The system’s Control Box The Control Box processes all information gathered. the human body. waterproof. It works as the brain to It is completely sealed by potting material to make it Harnesses and cables are soldered onto PCB and extended out with water-proofed connectors attached. Q Global Solutions (XiaMen) Electronic Corp. The system’s Digital Sensors 4 Digital Sensors (L, CL, CR, and R) having 15cm pigtail + waterproofed plugs are connected to 4 sensor-cables wrapped in a silt loom. The other end of the cables link to the control box’s extended sensor-cable outlets. The system’s Dome Buzzer Dome Buzzer is connected to the Control Box outlet harness. in different frequencies. The Buzzer beeps The frequency of the beep indicates the distance of the nearest sensor to the obstacle. The other function appears only in self-diagnosis when power switches on. Once power-on, the system starts its self-diagnosis a. 1 beep means all sensors and system work well. ● b. 2 beeps mean 1 sensor is out of order. ●● c. 3 beeps mean more than one sensor are out of order. ●●● Once power-on, obstacle distance detection starts Q Global Solutions (XiaMen) Electronic Corp. a. To center sensors, intermittent beeps mean the obstacle is within 4ft-6ft ● ● ● b. To center sensors, rapid beeps mean the obstacle is within 2ft-4ft; To corner sensor, that mean the obstacle is within 2ft-3ft. ●●● ●●● ●●● c. Solid beeps mean the obstacle is within 2ft ●●●●●● The system’s Momentary switch Momentary switch is connected with the Dome Buzzer. The system on/off is controlled by the switch. When the system is powered “off” and the gear moves to the “reverse”, the system turns back “on” again. LED turns on. When the system is power-on, When the system is power-off, LED turns off. When LED flashes, it indicates more than one sensor are out of order. The system with or without RF modules The RF system is having a bulge protruded in the center of the control box whilst the system without RF is using the control box as same as D Dualer’s. z RF = Radio Frequency. TX = Transmission, RX = Receiving RF system contains 1 x TX module in the control box and 1 x RX module in the buzzer. The signal data is transmitted from the control box (TX) to the buzzer (RX) by Radio Frequency means. It has no signal wire connected between the control box and the Buzzer. Q Global Solutions (XiaMen) Electronic Corp. Environment Learning Mode If the vehicle has a spare tire mounted on the back or awkward contour of the bumper, the system may detect it as an obstacle. By using Environment Learning the false alarm can be eliminated. Important Keep an “off” time about 3 seconds. If “off” time is more than 5 seconds, learning mode stops. There is no time limit for “on” time. Proceeding with Environment Learning Shift the gear back and forth between reverse and neutral, repeat this operation 5 times, the system would store the obstacle within 90cm into CPU as parameter. That particular obstacle would not trigger the false alarm. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Q Global Solutions (XiaMen) Electronic Corp.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2009:04:17 14:28:24+08:00 Create Date : 2009:04:17 14:28:24+08:00 Format : application/pdf Title : Microsoft Word - perpetual manual EN.doc Creator : terry new Document ID : uuid:49069b7e-6702-458f-8a8c-0fa470f1426d Instance ID : uuid:d3917163-da33-4b9c-83b9-107629f79e8c Page Count : 4 Author : terry newEXIF Metadata provided by EXIF.tools