Q See Qt Series Quick Start Guide Networking Guide_web

QT to the manual 2cd5d6d3-6c98-4175-9222-b55d96a701ea

2015-02-04

: Q-See Q-See-Qt-Series-Quick-Start-Guide-167083 q-see-qt-series-quick-start-guide-167083 q-see pdf

Open the PDF directly: View PDF .
Page Count: 5

Download
Open PDF In Browser	View PDF

This guide was written for use with DVRs using ﬁrmware version 3.1.9 or later.
To check your ﬁrmware version, click on Information in the Main Menu and then
click on System. If you have an earlier version, you will need to get your Gateway IP
address from the Network Information window (also located in the Information
menu) before continuing past Step 1.

Remote Monitoring Quick Start Guide
QT Series Network DVRs
Before You Get Started

IMPORTANT! This guide will instruct you on how to connect
your DVR to a network to allow you to monitor it remotely from a
computer or mobile device.

Video Loss

You will need:

This poster is intended to help you get your Q-See security system connected to your network and
accessible for remote monitoring. You must have already set up your system and have a basic idea of
its operation. There are many additional features which can be customized to your specific needs. More
information and instructions are available in the Remote Monitoring Guide incuded on the CD that came
with your system or available for download from our website at www.Q-See.com/Support.
For information on how to set up your DVR and cameras, please refer to the Quick Start Guide poster
included with your DVR along with the User Manual also included on the accompanying CD.

• Ensure that your DVR is connected directly to your network router using
a Cat5 or “Ethernet” cable plugged into your DVR’s network port (labelled
“NET” or “LAN”). Having a network switch between your DVR and router
can cause connectivity problems. Please note that your DVR must be
connected to your router with a cable as it will not work with a wireless
connection.

• You will need your router’s brand, model number and manual. The manual
is also usually available on your router’s manufacturer’s website.
• The “Manuals and Software” CD that came with your DVR. It contains
necessary software and links to other important programs which are
mentioned in this guide.

• Have a computer connected to the same router as your DVR.

Network Information
STEP 1 Establish an IP Address

D, E

NETWORK
Network Substream Email Other Settings

A. Click on the Menu icon in the tool bar on the DVR’s screen.

HTTP Port

B. Click on the Setup icon in the Main Menu

Server Port

6036

C. Click on the Network icon in the Setup Menu

IP Address

192 . 168 . 001 . 100

Subnet Mask

255 . 255 . 255 . 000

Gateway

192 . 168 . 001 . 001

Preferred DNS Server

000 . 000 . 000 . 000

Alternate DNS Server

000 . 000 . 000 . 000

D. Ensure that the box labeled “Obtain IP Address Automatically” is checked.
If it is not, please put a checkmark in the box, click on Apply and then Exit
the window. Reopen the window to see the updated IP address.
E. Write down the:
1. DVR’s IP Address
2. Subnet Mask, and
3. Gateway (your Router’s address)
F. Exit Menu

Obtain an IP address automatically

1
2
3

PPPoE
User Name
Password

Test
Default

Apply

Exit

UPnP or Port Forwarding
STEP 2 Opening Ports
To make your DVR accessible from outside of your local network, you have to “forward” ports 80 and 6036 through your router to your DVR’s IP address.
There are several ways to do this and we present two options which cover the majority of users. If you are unable to connect your DVR to the Internet using

either of these procedures, we describe two other methods in the Remote Monitoring Guide which can be found on the CD that came with your system.
Please note that if you are able to use UPnP, you should NOT forward your ports as this will cause connection issues.

OPTION A: UPnP
The QT series of DVRs come configured to take
advantage of the latest networking technology, UPnP
or Universal Plug ‘n Play right out of the box. If you
have an UPnP-enabled router, you will only need to
plug the DVR into your network and you will then be
able to proceed to the end of this section.
Consult your router’s manual to determine whether it
has UPnP or not. Please note that, as of this writing,
2Wire brand routers do not have the UPnP feature. If
you do not have a UPnP-enabled Router, you will have
to utilize another method to forward your ports.
If you wish to ensure that UPnP is turned on in your
DVR, go to the Network window as described in
Step 1, above, and click on the Other Settings tab.
The UPnP box should have a check mark in it. If it
does not, click on the box to add the check, then click
on Apply before hitting Exit. When you reopen the
window, the box should be checked.

OPTION B: Opening Ports Using DMZ
NETWORK

Network Substream Email Other Settings

A. On a computer connected to the same router
as the DVR, open a web browser and enter the
Gateway (Router’s IP address) you obtained in
Part 1 into the browser window’s address bar to
access your router.

DDNS

C. Enable DMZ.
D. Enter the DVR’s IP address (Obtained
in Step 1 Obtain an IP Address,
above).
E. Click on Apply or Save to preserve
your settings.

Browser - Windows Internet Explorer

DDNS Server

MyQ-See.com

User Name

myname@myemailaddress.com

Password

myqseeaccountpassword

Host Domain

myaccount.myq-see.com

DDNS Update [Hours]

http://10.6.196.6
Web Client

B. Locate the DMZ settings in your router. Each
manufacturer is different so please consult
your router’s manual for the location of this
setting. Two examples are shown at right.

Test

LIVE

BACKUP

CONFIG

UPnP
Default

Apply

Exit

Browser - Windows Internet Explorer

To confirm that your ports have been forwarded successfully, go to www.canyouseeme.org using a computer
connected to the same router as the DVR.
A. Enter “80” into the box labeled “What Port?”

http://canyouseeme.org/
Open Port Check Tool

B. Click on the Check button

CanYouSeeMe.org - Open Port Check Tool

C. You should see a green “Success” message. If not, return to the DVR’s Network window and, in the Network
tab, change port 80 to 81, 83 or 85 and click Apply to save your changes before checking using that new
number on CanYouSeeMe.

This page will serve as a free utility for remotely verifying a port is open or closed. It will
be useful for users who wish to check to see if a server or ISP is blocking certain ports.

D. Repeat for port 6036

Your IP: 81.919.622.24
What Port?
Check

Success: I can see your service on
81.919.622.24 on port (80)
Your ISP is not blocking port 80

This website will also display your Public IP address near the top of the page above the box where you entered
your port number. This is the number which you will use to access the DVR using a web browser or your
Page (away
Safetyfrom
Tools
mobile device from outside of your local network
the building in which your DVR is located). Please
note that if you had to use a different port number than 80, you will have to add a colon (:) and that port number to
the end of the address shown. Example 81.919.622.24:81.

Fixed Local Network Address
STEP 3 Static Internal IP (Network) Address
Most routers assign connected devices a random IP address that is not
currently in use by another device on your internal network. With the
exception of 2Wire brand routers, when a router or networked device
reboots due to a power loss or other issue, the addresses will change and
the port forwarding configuration will no longer work. For that reason, we
recommend changing your DVR’s network setting to a fixed, or “static” IP
address which will not change.

B. Click on the Network icon in the Setup Menu.

A. Click on the Setup icon in the Main Menu.

C. Uncheck the box
labeled “Obtain IP Address
Automatically”.

NETWORK
Network Substream Email Other Settings

D. Click Apply and then Exit.

HTTP Port

Server Port

6036

Obtain an IP address automatically
IP Address

192 . 168 . 001 . 100

Subnet Mask

255 . 255 . 255 . 000

Gateway

192 . 168 . 001 . 001

Preferred DNS Server

000 . 000 . 000 . 000

Alternate DNS Server

000 . 000 . 000 . 000

PPPoE

Accessing Your DVR Remotely

User Name
Password

STEP 4 Using the Web Client Software
Now that your ports have been successfully forwarded, you are now able to access your DVR from
your computer using Internet Explorer. Macintosh users, or PC users who prefer to use Safari,
should refer to the Macintosh Remote Access Guide on the CD that came with your DVR, or which
is available from www.Q-See.com/Support.
Whether you are monitoring your DVR from a computer on the same local network (LAN), or on
one at a remote location (WAN/Internet), the procedure is the same. The only difference is that for
LAN access you will be entering your DVR’s IP address, which you obtained in Part 1 Obtain an IP
Address, while for Internet access you will use the Public IP Address which was shown at the end
of Part 2 when you visited www.canyouseeme.org

A. Enter the appropriate address in the address bar of a Windows Explorer browser window in the
same manner as you’d enter any web address using either the DVR’s IP address or Public IP address as described above.

D. When the Web Client plug-in is fully downloaded, it will launch Test
in the web page and present you
with a login screen. Enter the same user name and password that you use when accessing the
Default
Apply
Exit
DVR. You may also choose your preferred language.

B. When the web page loads, you may receive a warning message along the top of the page indicating that an ActiveX control was blocked. You will need to click on the warning message bar to
unblock it.

E. Once you have logged in, the webpage will show the view from Camera 1 along with on-screen
controls to allow you to monitor and direct your DVR. Please consult the Remote Monitoring Guide
included on the CD that came with your DVR or available on our website, for instructions on how
to use the software.

C. You will be asked to install the file “WebClient.cab”. Click Allow to begin the download.

NOTE: Depending upon your security settings, your computer may ask you multiple times to confirm the installation and running of this application. This
Explorer plug-in is being downloaded from your DVR itself and should list Digital Peripheral Systems, Inc. as the publisher. Confirm the download and
launch of the software as needed. This authorization process should only occur during the first time you access the DVR from that particular computer.

Browser - Windows Internet Explorer
http://10.6.196.6

Browser - Windows Internet Explorer

http://10.6.196.6

Web Client

Page

Safety

Tools

Page

Web Client

Safety

Page

Web Client

Tools

LIVE

This website wants to install the following add-on: “WebClient.cab” from Digital Peripheral Solutions Ltd.” If you trust the website and the add-on and want to install it, click here...

BACKUP

CONFIG

TOOLS

Safety

Tools

INFO

2011-10-06 18:16:49
Status

Internet Explorer - Security Warning

Do you want to install this software?
Name: WebClient.cab

Publisher: Digital Peripheral Solutions Ltd.
More options

Install

Don’t Install

User Name

admin

Password
Language

Master Stream
Sub-Stream

5 6

9 10 11 12 13 14 15 16
Local Recording Status

English

While ﬁles from the Internet can be useful, this ﬁle type can potentially harm
your computer. Only install software from publishers you trust. What’s the risk?

5 6

9 10 11 12 13 14 15 16

Color
P.T.Z

Fine

Protected Mode: On

100%

Fine

Protected Mode: On

100%

Fine

Protected Mode: On

100%

Domain Name System (DNS)
STEP 5 Activating DNS
Once you have completed the above sections, you are able to operate your DVR remotely. The sections
below allow you to take advantage of additional features including the ability to access your DVR using a
conventional domain name and having your system send out e-mail alerts. To access these functions, you
will have to access your router to obtain your DNS (Domain Name Server) number. Because you will need
to be at your computer – connected to the same router as the DVR – to access your router, the following
instructions will allow you to make your DNS settings using the Web Client software.

Router

Page
SEARCH

BACKUP

CONFIG

TOOLS

Safety

INFO

Default
PageApply Safety
Tools

Local config
Network Setup

SETTINGS

STATUS

Basic

ADVANCED

HTTP Port

Server Port

6083

Live

B. Locate your router’s status window (may also be named “Information” or “Info”, it will list the DNS
number – copy this down.

STATISTICS

E. Click on the Network icon in the menu on the left of the screen.

Web Client

LIVE

DEVICE INFO

D. Click on the Config tab

http://10.6.196.6

A
http://81.919.622.24

A. Open up an Internet Explorer browser window and enter the Gateway address (Item #3 which you wrote
down in Step 1 Obtain an IP Address.)

C. Open or switch to the Web Client window in Internet Explorer

Browser - Windows Internet Explorer

LOGS
INTERNET SESSIONS
ROUTING
WIRELESS

F. Enter the DNS number from Step B in the section marked Preferred DNS Server. You do not need to have
an alternate server.
G. Click Apply to save your settings.

DEVICE INFORMATION

Obtain an IP Address Automatically

Record

Use the Following IP Address

IP Address

081 .

919 .

622 .

249

Subnet Mask

255 .

000

081 .

919 .

622 .

024

010 .

006 .

192 .

006

000 .

000

Gateway

All of your Internet and network connection details are displayed on thisSchedule
page.

Preferred DNS Server
Alternate DNS Server

WAN

PPPoE

Alarm

MAC Address :
IP Address :
Subnet Mask :
Default Gateway :
Primary DNS Server :
Secondary DNS Server :
Advanced DNS :

Network

00:24:01:77:f9:00
81.919.622.249
255.255.255.0
81.919.622.24
10.6.196.6 B
(null)
Disabled

User Name

Password

Network
Sub-stream
Email

DDNS
DDNS Server

myq-see.com

User Name

P.T.Z

Password
Host Domain

Users

DDNS Update [Hours]

3
Test

Advanced

UPnP

Apply

Default

Protected Mode: On

Fine

Dynamic Domain Name Service (DDNS)
This is an optional step which allows you to take advantage of Dynamic Domain Name Service, or DDNS. Not to be confused
with DNS above, DDNS allows you to enter a conventional web address when remotely logging into your DVR from outside
of your network. It also allows you to avoid having to repeat Steps 4 and 5 when/if your ISP reassigns IP addresses. Q-See
offers DDNS service for free at www.MyQ-See.com and your DVR is configured accept account information from that site.
For convenience, we will continue to use the Web Client software for the following instructions. These settings may also be
made on the DVR itself, in the Network window after obtaining the DDNS domain name (Steps A and B, below).

A-B

NEW USER REGISTRATION

Browser - Windows Internet Explorer
http://10.6.196.6

EMAIL ADDRESS

Page

Web Client
LIVE

PASSWORD

A. Keeping the Web Client window open, open another browser window and go to www.MyQ-See.com

Live

Record

LAST NAME

G. Click the Test button
H. If successful, you will see a message confirming your settings in a pop-up window. Close the pop-up and
click on Apply at the bottom of the Web Client window to save your settings.

SECURITY
QUESTION..

Fine

My ﬁrst phone number

TOOLS

Safety

Tools

INFO

Network
Network
Sub-stream
Email

P.T.Z

New Captcha
Users

Enter the text you see above
Submit

Advanced

Reset

Default

Server Port

6083
Use the Following IP Address

IP Address

081 .

919 .

622 .

249

Subnet Mask

255 .

000

Gateway

081 .

919 .

622 .

024

Preferred DNS Server

010 .

006 .

192 .

006

Alternate DNS Server

000 .

000

PPPoE

Alarm

ANSWER

CONFRIM
YOU’RE HUMAN

Apply

HTTP Port
Obtain an IP Address Automatically

Schedule

F. Enter your account information – password and domain name.

CONFIG

Network Setup
Basic

FIRST NAME

C. Switching back to the Web Client page, click on the Config tab at the top of the page.

E. Check the DDNS box and select MyQ-See.com in the DDNS server pull-down menu.

BACKUP

Local config

PASSWORD
CONFIRM

B. Register with the website and follow the instructions for creating a domain name. The website will display
your pubic IP address and your domain name which will look like this: http://example.myq-See.com

D. Select Network from the list along the left side of the page.

User Name

Protected Mode: On

100%

Password
DDNS

DDNS Server
User Name
Password

E
F

myq-see.com
John Q Public

Host Domain

http://example.myq-see.com

DDNS Update [Hours]

3
Test

UPnP

G
Apply

Fine

Default

Protected Mode: On

100%

E-Mail Alerts
STEP 6 Sending E-mail

STEP 7 Setting E-mail Triggers
While these settings can be made in the Network window on the DVR, for the purposes of this demonstration, we
will continue to use the Web Client window and use settings for Gmail – other services will have different values and
these can be found in that provider’s Options settings.

Your DVR can send e-mail notifications to up to three recipients. Depending on your DVR’s settings, the system can
generate heavy e-mail traffic. For that reason, we recommend creating a dedicated e-mail address specifically for
the system to send alert notices. If you do not have your own e-mail system (such as corporate mail server) you
should consider using a free e-mail provider. However, because many free e-mail services allow only a limited
amount of e-mail traffic we specifically recommend using Google’s Gmail service with its higher limit. Similarly, you
will want the alert e-mails to go to a different account than the one sending them. This will ease your management
of these alerts.

A. Keeping the Web Client window open, open another
browser window and Create an e-mail account for your
DVR to use in sending out the alerts.
B. Back in the Web Client window, click on the Email link
below the Network icon to open the Email window.

Browser - Windows Internet Explorer

http://10.6.196.6

Page
LIVE

BACKUP

CONFIG

TOOLS
Apply

Local config

INFO

Live

smtp.gmail.com

Port

465

Record

Schedule

YourDVR@gmail.com

Password

Alarm
motion
Motion Schedule
Sensor
Sensor Schedule
Video Loss
Other Alarm
Alarm out
Alarm out Schedule

receive1@gmail.com

Receive Addr2

Alarm

Network

Test

Advanced

Network

Network
Sub-stream
Email

P.T.Z

Apply

TOOLS

INFO
Default

Trigger

Area

Setting

Enable

Holding Time[s]

Setting

All

10
Trigger
Channel 1
Buzzer
Show Full Screen

None

Snap

Users

Fine

Advanced

Protected Mode: On

4
8

Protected Mode: On

Users

Fine

CONFIG

Default

P.T.Z

F. Click on Apply at the bottom to save your settings.

BACKUP

E-mail

Attaching Image

E. Check this box if you wish to attach an image recorded
by the camera when it detects motion.

Record

Receive Addr3

D. Press the Test button. A pop-up window will appear
indicating that the settings are being tested. It will be
replaced by a window indicating success.

Motion

SSL Check

Receive Addr1

LIVE

Apply

Live

SMTP Port

Send Addr

Tools

Basic

Mail
Basic

Safety

Local config

Default

A. Select the Alarm icon from the menu on the left side of
the
Safetyscreen
Tools in the Config tab.
B. Click the box under Enable for each camera that you want
to send an alert when it detects motion.
C. For each camera selected, you will need to click on the
Setting button in the Trigger column.
D. Click on the box next to E-mail.
E. Under Snap, you can indicate which cameras will take
snapshots for the e-mail.
F. Repeat for each camera
G. Click on Apply to save your settings.

Page

Web Client

C. Fill out the required information. Gmail settings are
shown:
SMTP Server – smtp.gmail.com
Port – 465
SSL Check – Gmail requires this to be selected.
Send Addresses – the Gmail address you created
Password – the e-mail password you entered when
creating your e-mail address
Receive Addresses – you may send notifications to up
to three addresses.

Now that you have your DVR configured to send e-mail
notificatioins, you will need to set up which events will
trigger a message. Most users prefer to receive alerts
when a camera detects motion. These alerts can also
include a still image of the event.
Instructions for additional settings are available in your
manual.

100%

Source Exif Data:

File Type                       : AI
File Type Extension             : ai
MIME Type                       : application/vnd.adobe.illustrator
PDF Version                     : 1.7
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.2-c063 53.351735, 2008/07/22-18:11:12
Create Date                     : 2011:11:02 10:28:09-07:00
Metadata Date                   : 2011:11:02 15:12:30-07:00
Modify Date                     : 2011:11:02 15:12:30-07:00
Creator Tool                    : Adobe InDesign CS4 (6.0.6)
Thumbnail Width                 : 256
Thumbnail Height                : 140
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 20463 bytes, use -b option to extract)
Instance ID                     : uuid:26c25c61-b77d-4f80-92fc-7b32dc32977c
Document ID                     : xmp.did:A4AAE0B2E604E111B7078E8CE7177E60
Original Document ID            : xmp.did:A4AAE0B2E604E111B7078E8CE7177E60
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved
History Instance ID             : xmp.iid:A4AAE0B2E604E111B7078E8CE7177E60, xmp.iid:A5AAE0B2E604E111B7078E8CE7177E60, xmp.iid:A6AAE0B2E604E111B7078E8CE7177E60, xmp.iid:A7AAE0B2E604E111B7078E8CE7177E60
History When                    : 2011:11:02 08:40:27-07:00, 2011:11:02 09:01:36-07:00, 2011:11:02 09:01:36-07:00, 2011:11:02 09:12:08-07:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /
Doc Change Count                : 183
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 11.000000
Max Page Size H                 : 6.000000
Max Page Size Unit              : Inches
Font Name                       : Arial-BoldMT, ArialMT, HelveticaNeueLTPro-BdCnO, HelveticaNeueLTPro-BdCn, HelveticaNeueLTPro-Bd, HelveticaNeueLTPro-MdCn, HelveticaNeueLTPro-Md, HelveticaNeueLTPro-Cn, HelveticaNeueLTPro-Roman, MyriadPro-Regular, HelveticaNeueLTPro-Blk
Font Family                     : Arial, Arial, Helvetica Neue LT Pro, Helvetica Neue LT Pro, Helvetica Neue LT Pro, Helvetica Neue LT Pro, Helvetica Neue LT Pro, Helvetica Neue LT Pro, Helvetica Neue LT Pro, Myriad Pro, Helvetica Neue LT Pro
Font Face                       : Bold, Regular, 77 Bold Condensed Oblique, 77 Bold Condensed, 75 Bold, 67 Medium Condensed, 65 Medium, 57 Condensed, 55 Roman, Regular, 95 Black
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 5.06, Version 5.06, Version 1.000;PS 001.000;Core 1.0.38, Version 1.000;PS 001.000;Core 1.0.38, Version 1.000;PS 001.000;Core 1.0.38, Version 1.000;PS 001.000;Core 1.0.38, Version 1.000;PS 001.000;hotconv 1.0.38, Version 1.000;PS 001.000;Core 1.0.38, Version 1.000;PS 001.000;Core 1.0.38, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 1.000;PS 001.000;Core 1.0.38
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : arialbd.ttf, arial.ttf, HelveticaNeueLTPro-BdCnO.otf, HelveticaNeueLTPro-BdCn.otf, HelveticaNeueLTPro-Bd.otf, HelveticaNeueLTPro-MdCn.otf, HelveticaNeueLTPro-Md.otf, HelveticaNeueLTPro-Cn.otf, HelveticaNeueLTPro-Roman.otf, MyriadPro-Regular.otf, HelveticaNeueLTPro-Blk.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, C=0 M=25 Y=100 K=0
Swatch Group Name               : Default Swatch Group
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : C=0 M=25 Y=100 K=0
Swatch Colorant Type            : SPOT
Swatch Colorant Tint            : 100.000000
Swatch Colorant Mode            : CMYK
Swatch Colorant Cyan            : 0.000000
Swatch Colorant Magenta         : 25.000000
Swatch Colorant Yellow          : 100.000000
Swatch Colorant Black           : 0.000000
Page Count                      : 5
Creator                         : Adobe Illustrator(R) 14.0
For                             : TOM SEELING,
Title                           : QT Networking Guide_web.pdf
Bounding Box                    : 0 0 792 432
Container Version               : 9
Creator Version                 : 14
Image Height                    : 432
Image Width                     : 792
Image Size                      : 792x432
Megapixels                      : 0.342

EXIF Metadata provided by EXIF.tools

Q See Qt Series Quick Start Guide Networking Guide_web

QT to the manual 2cd5d6d3-6c98-4175-9222-b55d96a701ea

Navigation menu

Versions of this User Manual:

Views

Navigation