QI SHENGLONG IST QSLMA781B Bluetooth Adaptor User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1861822
Application ID	bPmxZmZhyOy3eCk/60BaIA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.27kB (303429 bits)
Date Submitted	2012-12-17 00:00:00
Date Available	2012-12-17 00:00:00
Creation Date	2012-12-17 21:37:46
Producing Software	itext-paulo-155 (itextpdf.sf.net-lowagie.com)
Document Lastmod	2012-12-17 21:37:46
Document Title	Manual
Document Creator	pdftk 1.44 - www.pdftk.com

Bluetooth Audio Switch Box
Introduction
The main function of this product is audio switching for bluetooth audio devices. It can output stereo audio signal
through its 35MM earphone socket.Thls product Is compact In size, which Is very easy to carry. Moreover. it applies to
mobile phone, lPad, PC and bluetooth platforms with AZDP agreement. Its wireless distance can reach 10M.
Illustration
0 Charging indicator
0 MICRO USB charging port
0 POWER
G) © 7 0 3.5MM earphone socket
Featu res
' Support AZDP V1.2. AVR CP V1.4 profiles. ' Frequency range: 2.402-2.4BOGH1.
0 Compact in size, very easy to carry. ° Two LED Indicate different working state.
° With bulll—ln lithium battery. 0 Receiving distance can reach 10M.
Instructions
I To avoid low battery, please charge it before first use (Please refer to item 4 below).
- Turn on the bluetooth function oi the bluetooth audio device (like mobile phone) and Inquiry new device. then press
the power button of the product for Ss to turn on the product. this time the bluetooth connection Indicator will flash
red and blue alternately to searching bluetooth devices it will connect with your biuetooth device automatically. and
your bluetooth device will show device name 'MA-781', When It remind you to input safety code, enter ‘0000" to
connect with the biuetooth audio switch box, now the bluetooth connection indicator will light blue steadilyt
- You can use the 35MM earphone socket to connect other devices (like eraphone or amplifier) to listen to music or
other audio signal.
0 when the voltage 0' the product is lower than 3V, the product will cut of! power automatically, now you can use the
attached USB cable through the MICRO USE plug to charge the product. The power supply is 5V, charging time is 2 to
3 hoursThe charging indicator will light red steadily, and it will go out while fully charged.
0 Press the power button for 55. the blue LED light steadily and then go out. and it turn off.
Cautions
I Please turn off the power after used and put it in dry environment.
0 it is not able to turn on while the power Is lower than 3V, this conditions you must use a standard USB 5V devices to
charge it.
' Use a soft. dry cloth to clean the product, Do not use solvents or other chemicals.
' Do not use any heat to dry it.
' Do not expose it to high temperatures. high humidity or direct sunlight
I Do not put any heavy objects on it to avoid damages.
I Please stop to use it if it should break
I Do not let children play with it.
PDF created with pdiFactory trial version www.9dfiaciory.com
FCC STATEMENT
I. This device complies with Pan l5 of the FCC Rules. Operation is subject to the
following two conditions:
(I) This device may not cause hartnful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation
CAUTION: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception.
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more ofthe following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/T V technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set fonh for an
uncontrolled environment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Creator                         : pdftk 1.44 - www.pdftk.com
Producer                        : itext-paulo-155 (itextpdf.sf.net-lowagie.com)
Modify Date                     : 2012:12:17 21:37:46+01:00
Create Date                     : 2012:12:17 21:37:46+01:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools