Qianhaiyifan Technology F07 Smart Bracelet User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3717189
Application ID	q+8o7hnpkgUs+jztEFETdQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	77.55kB (969388 bits)
Date Submitted	2018-01-17 00:00:00
Date Available	2018-01-17 00:00:00
Creation Date	2017-12-20 17:38:59
Producing Software	Microsoft® Word 2016
Document Lastmod	2018-01-16 10:27:56
Document Title	User manual
Document Creator	Microsoft® Word 2016
Document Author:	Frank

The Instructions of Smart Bracelet
Product Name: Smart Bracelet
Model:F07,F10
Manufacture: Shenzhen Qianhaiyifan Technology Co., Ltd.
Please consult the instruction manual before your usage.
V1.0
Guidelines
1）Presentation and description of appearance of the product
Ouch button area
2）The instruction of Function
a．Motion steps
Calculate the number of moving steps, walking time, mileageas well as calories.
b. Sleep monitoring
Monitor the quality of sleep every day accurately, calculate the time length of deep sleep and light sleep.
c. Health measurement.
Monitor current health information,including heart rate, oxygen, blood pressure accurately.
（Data are for reference only and not for medical use）
d. Multiple motion modes
Accurate measurement of multiple modes of exercise: cycling, running, swimming, calories consumed
and length of exercise
e. Alarm clock/message reminder
Alarm clock, phone, Facebook, Line, WhatsApp, QQ, WeChat, SMS, sedentary reminder, anti-lost
reminder
f. Remote control camera
In favor of remote camera for mobiles or Flip your wrists to take photos
g.Hang up phones
Press Bracelet touch button for a long time, you can hang up the phone.
3）The instructions for Switching on/off the Tool
a. Press the touch button to boot the tool for a long time.
b. If you press for a long time, but fail to start, please make sure whether the battery is out of power or not.
c. If the battery is out of power, Please pull out the head strap，Insert USB charging interface and switch on
after charging
d. On the shutdown interface
, press the touch button to shut down the tool for a long time.
4）APP Installation and Device Binding
a. The requirements of mobile phone configuration: Android system 4.4 and above, IOS system 8.0 and
above, Bluetooth version of wood BLE4.0 and above.
b. Scan two-dimensional code below, download Android or IOS APP, then install them on the phone.
c. Device Bonded
Mode 1，Scan and connecttwo-dimensional codes in order to bind, as shown in the picture.
On the”step”interface, press the touch button for a long time, produce two-dimensional codes
connected by blue-toothin this bracelet（when the bracelet is connected with mobile phones, then
press the button for a long time, it will not open and link two-dimensional code）
Note：Each Bracelet connects two dimensional code，They are automatically generated，Each device is
connected to the two-dimensional code is not the same
Click APP scan code function，Scan Bracelet display connected two-dimensional code can quickly pair
connection
Click the function of scanning code, scan two-dimensional code displaying on the bracelet.
Mode2，Search and link to blue-tooth model, as shown in the picture.
Note：When the bluetooth icon on the bracelet ends is in a stationary state,which represents the
fact that the bluetooth has been connected.
When the bluetooth icon on the bracelet ends is in a blinking state,which represents the
face that the bluetooth has not been connected.
d. Device unbound, as shown in Figure.
5）Function Icons and Operating Instructions of Bracelets
Main interfacedate：
Date, time, week, power，
Bluetooth connection status
Press the button,then enter the next
interface for a short time.
Step interface：
Press the button for a long time,connect to the
Display the number of steps of
the day.
two-dimensional code interface.
Press the button,then enter the next interface for a short
time.
Training mode interface：
Into the training mode,
including cycling, running,
swimming mode, return
Press the button,then enter the next interface for a short
time.
Heart rate interface:
Measuring heart rate value
The results showed that heart
rate, systolic blood pressure
Enter this interface to automatically measure and display
and diastolic blood pressure,
heart rate, blood pressure, and blood oxygen values
blood oxygen value
Press the button,then enter the next
interface for a short time.
The sleep icon interface：
Displays sleeping time the
night before
Press the button,then enter the next interface for
a short time
The alarm clock icon：
Displays the alarmclock time
Set the alarm time by APP，Press the button,then enter
the next interface for a short time
Look for the phone icon：
Press the button 2S to start searching for your cell
phone for a long time. Press the button 2S for a long time
again to exit the search.Press the button,then enter the next
interface for a short time
Device information interface：
The Bluetooth address code and firmware version are
displayed on the long press，Press the button,then enter the
next interface for a short time
Shutdown interface：
Long press shutdown.
Press the button,then enter the next
interface for a short time
6）The Description of APP interface
a.Settings
(gender, age, height, weight) please complete the
user carefully
Please refer to the equipment binding and APP instructions
The relevant reminder function can be turned on or
off, and the operation mode is as follows:
b.Step interface
Record the number of steps in the day (24 points per day)
Click into training mode
Check the history steps
A bar chart of the day's moving steps
C．Sleep interface：
Record the previous day's sleep
View historical sleep data
The previous day's sleep chart
d.Heart Rate interface：
The last time you measured your heart rate
View historical heart rate data
Heart rate chart of the day
e.Bp interface：
The last time I measured the blood
pressure
View historical blood pressure data
pressure
Blood pressure measurement bar chart
f.SpO2 interface：
Last time the blood oxygen
View historical blood oxygen data
The blood oxygen measurement curve of the day
7）Precautions for use：
a．Theoretically the wristband supports mobile phones or tablet system IOS 7.0 system or above
and Android system 4.3 version or above with Bluetooth 4.0, but not all mobile device models are
available. Please referto the actual.
b.This prolicate elements,please do not throw it and strie it with hard objects, otherwise the
machine surface will be scratched or hardware be damaged.
c.Dot not disassemble or transform the product, otherwise problems will occur or product quality
guarantee be hampered.
d.It is forbidden to throw the product into fire for fear of explosion.
e.Note in wearing: if you are sensitive or wear the wristband too tight,you might feel
discomfortable.
f.Please wipe the wristband if it is wet prior to charging,otherwise failure will be caused and
the charging touch points corroded.
g.Under the strong static environment, failures might occur,e.g.no display or abnormal display
etc,Do nor use it in high pressure or high magnetic environments to avoid electrostatic
interference.
h.It is waterproof only when the lens and enclosure are intact. Water fightness may be ineffective
resulted from violent dismantlement or installation.
i.This product is waterproof for cold water to hot water may lead to fog appears in the lenses.
j.T he battery life time by using environment and use pattern changes.
Disclaimer：
Warning：This product is not a medical device, bracelet and its application should not be
used for diagnosis, treatment, Or disease, illness prevention and other acts, to change the
movement, sleep and other habits, be sure to first Qualified professional medical personnel
consultation, so as not to cause serious casualties. I remain in the company do not do pre-pass
Know the power to modify and improve any of the functions described in this manual The company
to keep the content of the product to update the right, all content, please prevail in kind!
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Warning                         : Invalid secondary xref table
Page Count                      : 10
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Microsoft® Word 2016
Format                          : application/pdf
Creator                         : Frank
Creator Tool                    : Microsoft® Word 2016
Create Date                     : 2017:12:20 17:38:59+08:00
Modify Date                     : 2018:01:16 10:27:56+08:00
Metadata Date                   : 2018:01:16 10:27:56+08:00
Document ID                     : uuid:6CE23140-64F2-4853-BE47-88E3046905DE
Instance ID                     : uuid:c554b6f7-fc01-46fd-bb10-7f39e2cf271a
Author                          : Frank

EXIF Metadata provided by EXIF.tools