Qiaohua QL-302S Security sensor light User Manual user manual

Download:
Mirror Download [FCC.gov]
Document ID	3929901
Application ID	/emYuGWb214nHZbVZxmmbA==
Document Description	user_manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	65.88kB (823555 bits)
Date Submitted	2018-07-19 00:00:00
Date Available	2018-07-19 00:00:00
Creation Date	2018-06-22 15:35:54
Document Lastmod	2018-07-05 11:23:43
Document Title	Thank you for purchasing our company's laser light. This machine can release countless stars
Document Creator	WPS Office
Document Author:	Administrator

USER MANUAL
SECURITY SENSOR LIGHT
MODEL NO.: QL-302S
It is very important to operate this product according to the following instructions. Failure
to do so may render your guarantee void.
CONTENTS
● 1 x Sensor Light ● 6 x Screws ● 1x Remote control ● 3 x Plastic screw ● 1x User
Manual
A,Main Light(Front Part)
B, Main Light(Back Part)
C, Screw
D, Base
E, LED Light
F, Code matching button
G, PIR Sensor area
SPECIFICATIONS:
●Wireless Frequency:433.92MHz+100KHz
●Power Voltage: DC 6V
●Auto Shut off(seconds): 15S, 30S, 60S Selectable
●Battery: 4 × D Size 1.5V (Not included)
●PIR Detection Distance: 5-10M
●PIR Sensor Angle: 120°
●Brightness(lumens): 200 lumens
●Light Projecting Angle: 90°
●Range Adjustable Angle: 150°
●Coverage area: 380 sq.ft / 36 sq.meters
●IP Class: IP65
●Working temperature: -20°C(-4°F) to 50°C(122°F)
Remote control function
Quick Setup
1. Remove all the components from packaging and saving packaging to store the sensor light
when not in use. Please make sure that there are 1 x Security Sensor Light, 3 x Screws, 3 x
Plastic Plugs, 1x User Manual in the packaging.
2. Install Batteries.
1). Take apart the front and back main light at anti-clockwise direction, pull out of the front part,
and open up the battery cover. (Icon A, B, C,D,E)
D
2). Put 4 pcs D size batteries in the jar with the right positive and negative electrode(Pay attention
to the “+”, “-” marks). Lid and fasten the battery cover. (Icon H,I,J)
3) Put the front part into the back cover, and screw to fasten the light at clockwise direction.(Icon
L,M,N)
ATTENTION: Please replace new D size batteries when light goes too weak. And do not mix
new and used batteries!
3. Install the Sensor Light(Fix on the wall):
1). Find a location of wall or a place to install. Mark the three screw-holes places by pencil(Icon
O,P). Use electric drill to punch holes (Icon Q). Use a hammer to knock the 3 plastic plugs
into the holes (Icon R).
O
2). Fix the base on the wall by tighten the screws ,take and hold the main part, screw at clockwise
direction and fasten on the base, and finished light installation (Icon S,T)
Note:Pay attention to the Sensor Angle when installing the main unit.
Time Selection
It is preset to be 15s lighting on lasting,
And users can choose 30s or 1 min or 15s lighting on lasting by pressing the time control button.
The 1st time pressing, the PIR Sensor fast flash 2 times, it is set to be 30s.
The 2nd time pressing, the PIR Sensor fast flash 3 times, it is set to be 1 minutes.
The 3rd time pressing, the PIR Sensor fast flash 1 times, it is set to be 15s.
Built-in Light Sensor
The sensor light only work at dark(＜25 Lumen).
Note: The darker the area the light being used in, the brighter the projection. Try to stay
away from areas with bright illuminating lights.
IMPORTANT SAFETY INSTRUCTIONS
1. No recommended for set-up or installation by children.
2. Close supervision is necessary when this furnishing is used by, or near children, invalids, or
disabled persons.
3. Use this furnishing only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
3. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
5. The furnishing has not been evaluated for flammability or cigarette ignition resistance!
6. Do not shake.
7. ONLY ALLOW USE BY RESPONSIBLE PERSONS
This is not a toy. Please put it away from children and babies.
8.This product was designed for indoor and outdoor use.
IMPORTANT
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will
not accept liability for any resulting defects or problems. Keep away from heaters and other
heating sources! Please note that damages caused by manual modifications on the device or
unauthorized operation by unqualified persons are subject to warranty. Keep young children and
amateurs away from the device!
PRECAUTIONS
This holiday projector light should be used at allowed working temperature: -20°C(-4°F) to
50°C(122°F)
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
CAUTION
EYE INJURY HAZARD -- DIRECT AND REFLECTED BEAM
LED LIGHT RADIATION – DO NOT STARE INTO BEAM OR
VIEW DIRECT WITH OPTICAL INSTRUCTIONS!
Maintenance and Cleaning
● Maintenance and cleaning shall only be done to the product surface. Unplug this product from
the power socket before cleaning.
● Do not wet any electric parts of this product. Please use a dry, soft cloth instead of sharp tools
for cleaning.
●When not in use, store neatly in a cool, dry location protected from sunlight.
●Please keep away from heaters and other heating sources.
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste.
It should be handed over to the applicable collection point for the recycling of electrical and
electronic equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2018:06:22 15:35:54+07:30
Creator Tool                    : WPS Office
Modify Date                     : 2018:07:05 11:23:43+08:00
Metadata Date                   : 2018:07:05 11:23:43+08:00
Format                          : application/pdf
Description                     : 
Creator                         : Administrator
Title                           : Thank you for purchasing our company's laser light. This machine can release countless stars
Keywords                        : 
Producer                        : 
Company                         : 
Comments                        : 
Source Modified                 : D:20180622153554+07'35'
Document ID                     : uuid:5f3b36a3-fa1b-4a73-b7ee-ad0637c47d3e
Instance ID                     : uuid:44927e18-58ee-4636-a8e6-2185c511ddae
Has XFA                         : No
Page Count                      : 6
Profile CMM Type                : Linotronic
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : Hewlett-Packard
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : Hewlett-Packard
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Subject                         : 
Author                          : Administrator
Trapped                         : false

EXIF Metadata provided by EXIF.tools