Qingdao Haier Technology MKQTWIFI08A WiFi Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3556572
Application ID	gedgSa6Y+q4nWR5kenm24g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.26kB (265701 bits)
Date Submitted	2017-09-12 00:00:00
Date Available	2017-09-12 00:00:00
Creation Date	2017-09-07 11:19:01
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2017-09-07 11:19:12
Document Title	User Manual
Document Creator	Acrobat PDFMaker 9.1 Word 版
Document Author:	SkyUser

Qingdao Haier Technology Co., Ltd
Instructions
1. Introduction
MK-QTWIFI-08(A)SoC module designed base on RTL8710BN-A0 chip solution, The SOC module is a highly intelligent platform
for the Internet of Everything that contains a low-powerWi-Fi connectivity solution on one package. It includes a number of
TCP/IP based connectivity protocols along with SSL, enabling a low-cost, low-complexity system to obtain full-featured internet
connectivity and reliable information exchange.
RTL8710BN-A0 is a highly integrated single-chip low power 802.11n Wireless LAN (WLAN) network controller. It combines an
ARM-CM3 MCU, WLAN MAC, a 1T1R capable WLAN baseband, and RF in a single chip. It also provides a bunch of
configurable GPIOs which are configured as digital peripherals for different applications and control usage.RTL8710BN
integrates internal memories for complete WIFI protocol functions. The embedded memory configuration also provides simple
application developments. The module contains a Security Chip IC (optional)，it supports configuration, binding, communication
and data encryption, security OTA
2. RF module Overview
Figure 1 MK-QTWIFI-08(A) Block Diagram
2.1 RF Specification Reference
SoC RFspecification refer to belowlist.
Main Chipset
RTL8710BN-A0
SoC RF standard
IEEE 802.11 b/g/n
Operating Frequency
2.412~2.462 GHz
UART Interface
For testing and OTP programming (Calibration data)
Antenna Design Options
PCB printed
WIFI: 11b: DBPSK, DQPSK and CCK and DSSS
RF Modulation
11a/g: BPSK, QPSK, 16QAM, 64QAM and OFDM
11n: BPSK, QPSK, 16QAM, 64QAM and OFDM
Data rates
11b: 1, 2, 5.5 and 11Mbps
11a/g: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps
Operation Voltage
5V +/-10% input
Qingdao Haier Technology Co., Ltd
2.2 System Functions
SoC S/W & system general specification refer to below list:
Main Chipset
RTL8710BN-A0
WLAN PHY Features
1T1R
Connective
WIFI Direct support
Package
QFN48 (6x6mm 2 )
Bandwidth
20MHz and 40MHz bandwidth transmission
HW acceleration
WPA,WPA2, WPS2.0
Form factor
Maximum 21 GPIO pins
PCB Stack
2-layers design (1+/-0.15mm)
Module Dimension
Typical，37.8mm x21.6mm x 4.0mm
2.3 Mechanical Specification
PCBA Mechanical Outline Drawing
Typical Dimension (W x L x T): 37.8mm x21.6mm x 4.0mm(+/-0.15 mm), PCB Thickness: 1mm (+/-0.1mm)
( Unit：mm )
2.4、Pin Distribution Definition
Pins sequence and distribution list as follows
Pins
Explanation
VCC
5V
GND
GND
UART
RXD
UART
TXD
Qingdao Haier Technology Co., Ltd
The UART interface circuit diagram
Base on the RXD and TXD concatenated 51 Ω matching resistance respectively.
3、Antenna information
3.1 Type of antenna
MK-QTWIFI-08(A) uses the PCB antenna
3.2 PCBAntenna clearance area
The MK-QTWIFI-08(A) use the PCB antenna, you need to make sure that the distance between main board PCB and other metal
components is at least more than 15 mm. The below shadow parts of the areasneed to be away from the metal devices, sensors,
interference sources and other materials may cause interference.
PCBAntenna minimum clearance area
Qingdao Haier Technology Co., Ltd
4、Application reference
Please read the following statement before using the WIFI module MK-QTWIFI-08(A).
FCC：
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
Please notice that if the FCC identification number is not visible when the module is installed inside another device, then the outside
of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use
wording such as the following: “Contains FCC ID: 2ALD3-MKQTWIFI08A” any similar wording that expresses the same meaning
may be used.
The module is limited to OEM installation ONLY.
The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module.
The module is limited to installation in mobile application;
A separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093
and difference antenna configurations.
The OEM integrator is responsible for ensuring that the host product which is installed and operating with the module is in compliant
with Part 15B unintentional Radiator requirements, please note that For a Class B digital device or peripheral, the instructions
furnished the user manual of the end-user product shall include the following or similar statement, placed in a prominent location in
the text of the manual.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the
possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm(8
inches) during normal operation.
Qingdao Haier Technology Co., Ltd
CE:
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Qingdao HaierTechnology Co.,Ltd declaresthat the radio equipment type WiFi Module is incompliance with Directive
2014/53/EU. There are no restrictions of use.
Support Standards:
IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Frequency Range:
2412 MHz to 2462 MHz
IEEE 802.11b: Not more than 18.79dBm
Maximum EIRP:
IEEE 802.11g: Not more than 16.14dBm
IEEE 802.11n: Not more than 15.91dBm
IC：
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitationestautorisée aux deux conditions suivantes : (1) l'appareildoit pas produire de brouillage, et (2) l'utilisateur de
l'appareildoit
accepter
fonctionnement.
tout
brouillageradioélectriquesubi,
mêmesi
le
brouillageest
susceptible
d'encompromettre
le
l'appareilhôtedoit porter uneétiquettedonnant le numéro de certification du module d'Industrie Canada, précédé
des mots « Contient un module d'émission », du mot « Contient » oud'une formulation similaireexprimant le mêmesens, comme suit
Please notice that if the IC identification number is not visible when themodule is installed inside another device, then the outside of
the deviceinto which the module is installed must also display a label referring tothe enclosed module. This exterior label can use
wording such as thefollowing: “Contains IC:22897-MKQTWIFI08” any similar wording that expresses the samemeaning may be
used.
L’étiquette d’homologation d’un module d’Innovation, Sciences etDéveloppementéconomique Canada devraêtreposée sur le
produithôteàunendroitbien en vue, en tout temps. En l’absence d’étiquette, le produithôtedoit porter uneétiquettesurlaquelle figure
le numéro d’homologationdu module d’Innovation, Sciences et DéveloppementéconomiqueCanada,précédé du mot « contient »,
ou d’une formulation similaireallantdanslemême sens et qui vacomme suit : Contient IC : 22897-MKQTWIFI08est le numéro
d’homologation du module.
Manual Information to the End User
The OEM integrator has to be aware not to provide information to the enduser regarding how to install or remove this RF module in
the user’s manualof the end product which integrates this module. The end user manual shall include all required
regulatoryinformation/warning as shown in this manual.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : SkyUser
Create Date                     : 2017:09:07 11:19:01+08:00
Modify Date                     : 2017:09:07 11:19:12+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2017:09:07 11:19:12+08:00
Creator Tool                    : Acrobat PDFMaker 9.1 Word 版
Document ID                     : uuid:9c4d7cab-8096-4fd8-9603-9a6fc3bb08aa
Instance ID                     : uuid:2119207e-46e5-4dc0-a91a-74ce62ffef10
Subject                         : 21
Format                          : application/pdf
Creator                         : SkyUser
Producer                        : Adobe PDF Library 9.0
Source Modified                 : D:20170907030825
Company                         : iTianKong.com
Page Layout                     : OneColumn
Page Count                      : 5

EXIF Metadata provided by EXIF.tools