Qingdao Intelligent and Precise Electronics ZDGFMT7612U IEEE 802.11 a/b/g/n/ac 2.4GHz+5GHz 2T2R USB Module User Manual

Qingdao Intelligent&Precise; Electronics Co.,Ltd IEEE 802.11 a/b/g/n/ac 2.4GHz+5GHz 2T2R USB Module

User Manual

Qingdao Intelligent & Precise Electronics Co., Ltd       ZDGFMT7612U User Manual        Product Name:IEEE 802.11 a/b/g/n/ac 2.4GHz+5GHz 2T2R USB Module Model  :ZDGFMT7612U
1   1. Introduction  Thank you for using the Wi-Fi module product provided by Qingdao Intelligent&Precise Electronics Co.,Ltd. Before use, please read this user manual carefully. Please follow the technical specifications when using the module in your design and develop activities. Qingdao Intelligent & Precise Electronics Co., Ltd has the right to change the contents of this manual in accordance with the needs of the technical development.  FCC statement  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:     (1) this device may not cause harmful interference, and (2) this device must accept any interference received,     including interference that may cause undesired operation.  FCC  RF  Radiation  Exposure  Statement  Caution:  To  maintain  compliance  with  the  FCC’s  RF  exposure guidelines, place the product at least 20cm from nearby persons.  Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.  IC statement  This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:   (1)  this  device  may  not  cause  interference,  and  (2)  this  device  must  accept  any  interference,  including interference that may cause undesired operation of the device.  Le présent  appareil est  conforme  aux  CNR  d'Industrie  Canada  applicables  aux  appareils  radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :   (1)  l'appareil  ne  doit  pas  produire  de  brouillage,  et  (2)  l'utilisateur  de  l'appareil  doit  accepter  tout  brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.  This  equipment  complies  with  IC  radiation  exposure  limits  set  forth  for  an  uncontrolled  environment.  This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.  Cet équipement est conforme aux limites d'exposition au rayonnement du CI établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.  Restrictions information The device for operation in the band 5150-5350 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.   Le  dispositif  destiné  à  fonctionner  dans  la  bande  5150-5350  MHz  est  uniquement  destiné  à  être  utilisé  à l'intérieur pour réduire les risques de brouillage préjudiciable aux systèmes mobiles par satellite co-canal.  Label Host labeling requirement:”Contains transmitter module FCC ID:2AJVQ-ZDGFMT7612U”. Host labeling requirement:”Contains transmitter module IC:22470-ZDGFMT7612U”.
2   2.Product Information 2.1 Product Information  ZDGFMT7612U Wi-Fi USB module is a wireless signal module device, and works at 2.4GHz (2.400 ~ 2.4835 GHz)/5GHz (5.150 ~ 5.85GHz). ZDGFMT7612U comply with IEEE 802.11a、802.11b、802.11 g  、802.11 n and 802.11 ac standard. It support up to 867Mbps physical layer transmitting rate. ZDGFMT7612U support USB 2.0, which has up to 480Mbps data rate.    ZDGFMT7612U has 2T2R structure,  has two onboard PIFI Antennas. It could provide stable wireless link with high throughput.  ZDGFMT7612U  is  a  wireless  Wi-Fi  signal  module.  It  could  transmit  and  receive  Wi-Fi  wireless  signal.It  is widely used to multi-media device, such as smart TV. Equipped with ZDGFMT7612U, a smart TV could access to Wireless  Local  Network,  which  is  also  called WLAN  or WIFI  network.  ZDGFMT7612U  helps  multi-media device achieve to send & receive data package in a wireless way.  2.2 Feature      ●IEEE standard:IEEE 802.11a/b/g/n/ac client device without radar detection     ●operating Frequency 2.4GHz/5GHz     ●support up to 867Mbps     ● 2T2R mode     ●Support 20MHz, 40MHz, 80MHz in 5GHz band , and 20MHz, 40MHz band width in 2.4GHz band.       ●support USB 2.0 high data rate mode,10-pin interface     ●low power consumption     ●support Wi-Fi direct link     ●support WFA/ WPA/WPA2 /WPS2.0/WAPI security     ●ROH     ●MAC /baseband/RF:MT7612U  3. Product Specification  3.1 Parameter  WLAN Standard IEEE802.11a/b/g/n/ac Data Interface USB 2.0 Modulation Mode WIFI: 802.11b:CCK, DQPSK, DBPSK 802.11a, 802.11g:64QAM, 16QAM, QPSK, BPSK 802.11n: 64QAM, 16QAM, QPSK, BPSK 802.11ac: 256QAM, 64QAM, 16QAM, QPSK, BPSK *Working Frequency 2400-2483.5MHz for US and Canada 5150-5350MHz for US and Canada 5470-5725MHz for US only 5725-5850MHz for US and Canada Typical Tx Power 2.4GHz Band 17dBm±3dB for SISO mode (Ant0); 16dBm±2dB for MIMO mode (Ant0 or Ant1); 5GHz Bands 14dBm±3dB for SISO mode (Ant0); 14dBm±2dB for MIMO mode (Ant0 or Ant1); Receiver Sensitivity 11b @ 11Mbps: (Max.): -84dBm, (Typical): -87dBm (PER<8%) 11g @ 54Mbps: (Max.): -69dBm, (Typical): -74dBm (PER<10%) 11n @ MCS7 (2.4g HT20): (Max.): -67dBm, (Typical): -73dBm (PER<10%) 11n @ MCS7 (2.4g HT40): (Max.): -64dBm, (Typical): -68dBm (PER<10%) 11a @ 54Mbps: (5g): -69dBm, (Typical): -74dBm (PER<10%) 11n @ MCS7 (5g HT20): (Max.): -67dBm, (Typical): -71dBm (PER<10%) 11n @ MCS7 (5g HT40): (Max.): -64dBm, (Typical): -66dBm (PER<10%)
3  11ac @ MCS9 (5g HT80): (Max.) : -51dBm , (Typical) : -58dBm (PER<10%) Working Voltage 5V±10% I/O supply voltage Antenna Gain Ant0: 2.9dBi, Ant1:2.9dBi Antenna type Two onboard PIFI antennas Working Temperature -10~+70℃ Storage Temperature -40~+125℃  4. Hardware information  4.1 Structure dimension (Unit: mm)  PCB Material:FR-4,Surface treatment:OSP Appearance Dimension(mm): 46.5(+/- 0.3)×40(+/- 0.3) PCB thickness:1.0mm(+/-0.15mm) Via:Ф4mm(+/-0.15mm) Antenna Height:3.3mm(+/-0.15mm)  4.2 PIN definition  NO Description 1   WIFI_REG_ON 2   BT_HOST_WAKE 3   VCC 4   BTDN 5   BTDP 6 GND 7 GND 8 3D_SYNC 9 BT_REG_ON 10 WLAN_DEV_WAKE  4.3 Block Diagram

Navigation menu