Qingdao Intelligent and Precise Electronics ZDWM2401 IEEE 802.11 b/g/n 2.4GHz 1T1R USB Module User Manual

Qingdao Intelligent&Precise; Electronics Co.,Ltd IEEE 802.11 b/g/n 2.4GHz 1T1R USB Module

Users Manual

Qingdao Intelligent & Precise Electronics Co., Ltd         ZDWM2401 User Manual        Product Name:IEEE 802.11 b/g/n 2.4GHz 1T1R USB Module Model  :ZDWM2401
1  1.Introduction Thank you for using the Wi-Fi module product provided by Qingdao Intelligent&Precise Electronics Co.,Ltd. Before use, please read this user manual carefully. Please follow the technical specifications when using the module in your design and develop activities. Qingdao Intelligent&Precise Electronics Co.,Ltd has the right to change the contents of this manual in accordance with the needs of the technical development.   This device complies with Part 15 of the FCC Rules.   Operation is subject to the following two conditions:   (1) this device may not cause harmful interference, and (2) this device must accept any interference received,   including interference that may cause undesired operation.   FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons.    Warning:  Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.    Host labeling requirement:”Contains transmitter module FCC ID:2AJVQ-ZDWM2401”
2  2.Product Information 2.1 Product Information ZDWM2401 wifi USB module is a wireless signal module device work at 2.4Ghz .ZDWM2401 comply with IEEE  802.11b、802.11  g  and  802.11  n  standard。It  support  up  to  150Mbps  physical  layer  transmitting  rate. ZDWM2401 support USB 2.0, which has up to 480Mbps data rate. ZDWM2401 has 1T1R structure,  has an onboard Antenna. It could provide stable wireless link with high throughput。 ZDWM2401 is a wireless WiFi signal module. It could transmit and receive WiFi wireless signal. It is widely used to multi-media device, such as smart TV.    Equiped with ZDWM2401, a smart TV could access to Wireless Local Network, which is also called WLAN or WIFI network. ZDWM2401 helps multi-media device achieve    to    send&receive    data package in a wireless way.  2.2 Feature   ●IEEE standard:IEEE 802.11b/g/n client   ●operating Frequency 2.4Ghz   ●support up to 150Mbps   ●1T1R mode   ●support 20MHz/40MHz different bandwidth   ●support USB 2.0 high data rate mode,5-pin USB signal and power connector   ●low power consumption   ●support    Wi-Fi direct link   ●support WFA/ WPA/WPA2 /WPS2.0/WAPI security   ●RoHs 2.3 MCU   MAC /baseband/RF:MT7601U 3.Product Specification 3.1 Parameter WLAN Standard IEEE802.11b;IEEE802.11g;IEEE802.11n Data Interface universal Serial    Bus(USB2.0)
3  Data rate 802.11b:11,5.5,2,1Mbps; 802.11g:54,48,36,24,18,12,9,6,Mbps; 802.11n:MCS 0 to 7 for HT20MHZ;                 MCS 0 to 7 for HT40MHZ。 Modulation Mode 802.11g/n---OFDM(BPSK,QPSK,16QAM,64QAM); 802.11b---CCK 11Mbps,5.5Mbp,QPSK 2Mbps  ,BPSK 1Mbps。 Channel 2.4GHz 11:(Ch.1-11)-United States(FCC) 13:(Ch.1-13)-Europe 14: (Ch.1-14)-Japan Working Frequency 802.11b&g 2.412~2.462 GHz-N. America(FCC) 2.412~2.484 GHz-Japan 2.412~2.472 GHz-Europe ETSI Typical Tx Power (±1dBm) 802.11b(802.11 CCK,11Mbps)    18dBm 802.11g(802.11 OFDM,54Mbps)   18dBm@54Mbps 802.11n   17dBm@HT20 MCS0   17dBm@HT20 MCS7   16dBm@HT40 MCS0   16dBm@HT40 MCS7 Receiver Sensitivity -85dBm @ 11M(802.11b CCK,8% PER) -65dBm @ 11M(802.11g OFDM,10% PER) -64dBm @ MCS7(802.11n OFDM with 20MHz ,10% PER) -61dBm @ MCS7(802.11n OFDM with 40MHz ,10% PER) Working Voltage 5V±10%    I/O supply voltage Support OS Linux   Antenna Gain 2dBi Antenna type An onboard Omni-directional antenna;   3.2   min max  Working Temperature -10 70 ℃ Storage Temperature -40 125 ℃ 4. Hardware information 4.1 structure dimension:(mm) PCB Material:FR-4,Surface treatment:OSP。 Appearance Dimension(mm): 40(+/- 0.2)×33(+/- 0.2)。  PCB thickness:1.0mm(+/-0.15mm)。
4  Via:Ф4mm(+/-0.15mm)。  Antenna Height:5.9mm(+/-0.15mm)。   4.2  PIN definition NO NAME Description 1   VCC   5V DC Power supply   2   DM   USB data-,D- 3   DP   USB data+,D+ 4   GND   Ground   5   Reset

Navigation menu