Qingdao Richmat Intelligence Technology HJC0 Remote control module User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	3111156
Application ID	7BYnPJOijAdCRs4CxtFxSA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	54.98kB (687222 bits)
Date Submitted	2016-08-25 00:00:00
Date Available	2016-08-25 00:00:00
Creation Date	2016-07-14 14:54:44
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2016-07-14 14:54:44
Document Title	Manual
Document Creator	Microsoft® Office Word 2007
Document Author:	WangHui

HJH8B User’s Manual
HJH12 User’s Manual
Foot up
Head up
Head and foot up
Torch
Head up
Head down
Foot up
Foot down
Head and foot up
Head and foot down
Head down
Foot down
Head and foot down
HJH13 User’s Manual
HJH26 User’s Manual
Head up
Foot up
Memory
Head down
1.0 Functions
Foot down
Flat
Torch
1.1 Actuator functions
1.2 Massage functions
Number
Functions
Press button and release, head move to up
number
functions
Increase intensity, reach highest intensity
position, foot move to down position
Press button and release, foot move to up
when hear beep
position, head move to down position
Press button and release, head and foot move
when hear beep
to up position
Head up
Head down
Foot up
Foot down
Memorize position
Reset
Recall memorized position
Decrease intensity, reach lowest intensity
Increase speed, reach fastest speed when hear
beep
Decrease speed, reach slowest speed when hear
beep
On/off massage 1
On/off massage 2
Pulse mode
Wave mode
Consistent mode
1.3 Other functions
number
Functions
Torch
Night light
1.4 Coding function
Functions
Number
Function
d+f
Press d+f button together, and press coding
button simultaneously, when hear beep
sound(when coding) or indicator flash(when
coding), coding finish.
HJH29 User’s Manual
Number
Functions
TV
Lounge
Zero Gravity
Flat
Increase vibration
Decrease vibration
Vibration on/off
Up
Down
Torch
Night light
Foot part
Switch
Head part
HJH37 User’s Manual
HJH39 User’s Manual
Head up
Foot up
Head up
Head and foot up
Foot up
Head and foot up
Torch
Head down
Foot down
Head down
Foot down
Head and foot down
Head and foot down
Night light
HJH51 User’s Manul
HJH55
Head up
Foot up
Head and foot
up
Head down
Foot down
Head and foot down
User’s Manul
Functions
Number
Functions
TV
Lounge
Zero Gravity
Head up
Head down
Foot up
Foot down
Lumbar up
Lumbar down
Memory position 1
Memory position 2
Flat
Timer off
Increase vibration
Timer on
Decrease vibration
Night light
Torch
Caution:
Information for the OEM Integrators
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device is intended for OEM integrators only. Please see the full grant
of equipment document for restrictions.
Label Information to the End User by the OEM or Integrators
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
If the FCC ID of this module is not visible when it is installed inside another
device, then the outside of the device into which the module is installed
must be label with
“Contains FCC ID: 2AITPHJC0”

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 8
Language                        : en-US
Tagged PDF                      : Yes
Author                          : WangHui
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2016:07:14 14:54:44+08:00
Modify Date                     : 2016:07:14 14:54:44+08:00
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools