Qingdao Yeelink Information Technology XMCTD01YL YEELIGHT Bedside Lamp User Manual EN

Download:
Mirror Download [FCC.gov]
Document ID	3028882
Application ID	dmVlnR1rDm1lQu/GqxAt8A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	58.81kB (735070 bits)
Date Submitted	2016-06-15 00:00:00
Date Available	2016-06-15 00:00:00
Creation Date	2017-12-08 10:15:55
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-08 10:15:55
Document Title	床头灯说明书-EN
Document Creator	Adobe Illustrator CS5

FCC COMPLIANCE STATEMENT
Get started
Switch on the bedside lamp
Connect to the power supply
Connect the adapter to the power source and plug the other
end into the bedside lamp jack
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Intelligent control
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Yeelight bedside lamp
This device complies with FCC RF Exposure requirements for general use conditions.
To safisty FCC RF exposure requirements for this device, The antenna(s) used
for this transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Slide your finger around
the edge to adjust the brightness
Power On/Off button
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Turn on Bluetooth on your phone
Scan the QR code or download the Yeelight bedside lamp
app from the app store
Scene button
Turn on the bedside lamp, open the app and connect by
following the instructions shown on the user interface
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
Adapter
Lamp jack
—Connect the equipment into an outlet on a circuit different from that to which the
Power On/Off button
receiver is connected.
Press the button lightly to switch the lamp on/off
User Manual for
the Yeelight Bedside Lamp
Thank you for purchasing this product. The Yeelight
bedside lamp is a next-generation lighting product that
combines the advanced LED and intelligent technology.
It uses high-quality LED light beads combined with a
light mixing algorithm and patented optical structure to
produce natural light, offering a perfectly uniform and
full-color lighting experience.
Scene button
Press the button lightly to switch between preset scene modes
The Three Guarantees Certificate for
the Yeelight Bedside Lamp
Power On/Off button
16 million colors
Dimming
Colorflow
Color temperature
adjustment
If a fault that doesn't result from human error occurs within the Three Guarantees period,
the customer is entitled to the following services:
1. If any of the faults listed in the Yeelight Bedside Lamp Faults occurs within 7 days of receiving
the product, the customer can choose to return the product or receipt of a direct replacement free
of charge at the discretion of an after-sales service center following an inspection;
2. If any of the faults listed in the Yeelight Bedside Lamp Faults occurs within 8-15 days of receipt
of the product, the customer can receive a direct replacement free of charge at the discretion of
an after-sales service center following an inspection;
Power On/
Off button
Scene switch
Touch sensitive
Nightlight
Eye protection
3. If any of the faults listed on the Yeelight Bedside Lamp Faults occurs within 12 months of
receipt of the product, the customer can choose to have the product repaired for free at the
discretion of an after-sales service center following an inspection.
Non-Warranty Regulations
Manual color adjustment
Safe mode
Hold down the Scene button and slide your finger around the
edge to adjust the color
If the lamp does not work normally after a firmware upgrade, plug in the
power adapter while holding down the Scene button. The lamp will be
booted into safe mode and the firmware upgrade can be implemented.
* This does not change the colors of the preset scene mode.
Timer switch
Delayed switch-off Mobile control
Firmware upgrade
Basic parameters
* Use the mode with caution when the lamp works normally
Scene
button
Product name: Yeelight bedside lamp
Product model: XMCTD01YL
Color adjustment: 16 million colors
Supported platforms: Android & iOS
Height: 221mm
Communication mode: Bluetooth 4.0
Weight: 680g
Dimming: Touch wheel dimming,
Diameter: 100mm
Scene
button
Declaration of toxic and hazardous substances
contained in electronic information products
Toxic and hazardous substances or elements
Yeelight bedside lamp after-sales service commitment: the Three Guarantees after-sales services
are provided in strict accordance with the "Law of the People's Republic of China on Protection of
Consumer Rights and Interests" and "Product Quality Law of the People's Republic of China":
Situations that are not covered by the Three Guarantees services include,
but are not limited to, the following:
1. The customer doesn't hold a Three Guarantees certificate or a valid invoice, or his/her
Three Guarantees certificate has expired;
2. The product is damaged because it has not been used, maintained or stored in accordance
with the instructions stated in the user guide;
3. The product is damaged due to fire, flooding, lightning or other force majeure events;
4. The model number or code on the warranty certificate does not match the product;
5. Normal discoloration, wear or deterioration is not covered under warranty.
Yeelight Bedside Lamp Faults
Name
Fault
Please visit http://fuwu.mi.com
or call 400-100-5678 for more info about after-sales services.
Executive standard: Q/QDYLK0001-2015
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.
Add: International Innovation Park, 169 Songling Road, Laoshan District, Qingdao, China
* Please upgrade the product in a timely manner to add more functions
and optimize user experience.
Component
name
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(CrVI)
Polybrominated Polybrominated
biphenyls
diphenyl ethers
(PBB)
(PBDE)
Lamp body
Adapter
The Three Guarantee Certificate can be cut off along the dotted line
Factory reset
Hold down the Power On/Off button and plug in the power adapter;
the bedside lamp has been restored to the factory settings when
the light comes on.
* The default setting for delayed switch-off is 15 minutes. The time can be changed in the app.
Slide your finger around the edge to adjust the brightness
Warranty Regulations
Delayed switch-off
Hold down the Power On/Off button until the light flashes
gently, and release it to enable the delayed switch-off function
Please read this manual carefully
before using the product
To buy more smart products,
please visit mi.com or check out
the Mi Smart Home app to buy
and use directly.
Also supports Mi Smart Home
Touch area
* It is recommended that you place the lamp be placed on a bedstand or desk
Product features
Advanced functions
—Consult the dealer or an experienced radio/TV technician for help.This Ths
Adapter plug
The Three Guarantees Certificate for
the Yeelight Bedside Lamp
Customer name
(Mr/Mrs/Miss/Ms)
Contact number
Customer address
Product model
Serial number
Store of purchase
Purchase date
Accessories
O: Indicates that the toxic or hazardous substance contained in the component is within the
limit stipulated by the Requirements for Concentration Limits for Certain Hazardous
Substances in Electronic Information Products SJ/T11363-2006 standard.
Store address
Purchaser
(seal)
Invoice number
X: Indicates that the toxic or hazardous substance contained in a component exceeds
the SJ/T11363-2006 standard.
The black diode on the PCB in the main body of the bedside lamp contains a trace amounts of
lead. This product meets EU RoHS environmental requirements. Due to absence of a mature
technology, the trace amounts of hazardous materials contained in the product cannot
currently be replaced or reduced:
Please note:
1. Always use the standard power adapter in order to avoid product damage or safety hazards;
2. Do not disassemble or repair the product yourself, in order to avoid damaging the product;
3. Keep away from water to avoid water damage to the product;
4. Keep away from sources of heat and fire;
5. Do not cover the bedside lamp with clothing, bedding, etc., to avoid overheating.
The Three Guarantees Certificate for
the Yeelight Bedside Lamp
Customer name
(Mr/Mrs/Miss/Ms)
Contact number
Customer address
Product model
Serial number
Store of purchase
Purchase date
software dimming
Luminous flux: 300lm
Rated input: 100-240V ~ 50/60Hz 0.5A
Lifetime: 20,000h
Bedside lamp input: 12V
Color temperature range: 1,700 K-6,500 K
Rated power: 10W (14 x 0.7W/LED Module)
1A
Touch function failure
Lamp body
Power On/Off button failure
Scene button failure
Cracks in the outer casing due to structural or material defects
Operating temperature: -20 to 45℃
Adapter
Store address
Purchaser
(seal)
Inability to power the bedside lamp
Invoice number

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2016:05:06 17:30:38+08:00
Creator                         : Adobe Illustrator CS5
Modify Date                     : 2016:06:15 09:16:30-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : Adobe Illustrator CS5
Metadata Date                   : 2016:06:15 09:16:30-07:00
Thumbnail Width                 : 256
Thumbnail Height                : 172
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 14444 bytes, use -b option to extract)
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 1029.342166
Max Page Size H                 : 677.890750
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, FZLTZHK--GBK1-0
Font Family                     : Arial, FZLTZHK -GBK1-0-GBpc-EUC-H
Font Face                       : Regular, -GBK1-0-GBpc-EUC-H
Font Type                       : Open Type, Unknown
Font Version                    : Version 5.06, Version 5.010;PS 5.005;hotconv 1.0.57;makeotf.lib2.0.21895
Font Composite                  : False, False
Font File Name                  : arial.ttf, AdobeHeitiStd-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, Artios_, 0 60 80 0, 60% Gray, PANTONE Orange 021 C, Global Color, PANTONE Black C, Artios_ 1, PANTONE 1505 C, 专灰
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: 专灰
Swatch Groups Colorants Type    : SPOT
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Cyan    : 0.000000
Swatch Groups Colorants Magenta : 0.000000
Swatch Groups Colorants Yellow  : 0.000000
Swatch Groups Colorants Black   : 80.000001
Format                          : application/pdf
Title                           : 床头灯说明书-EN
Rendition Class                 : proof:pdf
Document ID                     : xmp.did:F326D42E6D13E6118642E99A67134773
Instance ID                     : uuid:82a5b1c9-670d-42b3-804f-51c5b49c6179
Original Document ID            : xmp.did:0C85D8AAF0A5E4119E35DC0E58C5D360
Derived From Instance ID        : uuid:bf1fe923-612d-458e-bca9-fd5cec7fe1a4
Derived From Document ID        : xmp.did:D1688005C24FE511A47B931F1B2325FD
Derived From Original Document ID: xmp.did:0C85D8AAF0A5E4119E35DC0E58C5D360
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved
History Instance ID             : xmp.iid:0C85D8AAF0A5E4119E35DC0E58C5D360, xmp.iid:D1688005C24FE511A47B931F1B2325FD, xmp.iid:F326D42E6D13E6118642E99A67134773
History When                    : 2015:01:27 14:49:40+08:00, 2015:08:31 21:49:28+08:00, 2016:05:06 17:30:33+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS6 (Windows), Adobe Illustrator CS5
History Changed                 : /, /, /
Producer                        : Adobe PDF library 9.90
Trapped                         : False
Nrpages                         : 1
Startlogpage                    : 1
Units                           : mm
Vsize                           : 772.3375258
Hsize                           : 1172.750811
Margtop                         : 0.
Margbot                         : 0.
Margleft                        : 0.
Margright                       : 0.
Vshrink                         : 1.
Hshrink                         : 1.
Readerspread                    : False
Inks Name                       : Artios_切割
Inks Type                       : designer
Inks Book                       : none
Inks Egname                     : Artios 切割
Inks Frequency                  : 120.
Inks Angle                      : 45.
Inks Dotshape                   : 
Inks R                          : .1353149414
Inks G                          : .09422302246
Inks B                          : .08212280273
Inks Attribute                  : normal
Coverage                        : , , , , , , ,
Layers Name                     : Graphics
Layers Printable                : True
Layers Locked                   : False
Files                           : 
Pagelist Start                  : 0
Pagelist End                    : 0
Pagelist Inks                   : 1, 2, 3, 4, 5, 6, 7, 8
Page Count                      : 1
For                             : Administrator,
Bounding Box                    : 0 0 2918 1922
Container Version               : 11
Creator Version                 : 15
Image Height                    : 1922
Image Width                     : 2918
Image Size                      : 2918x1922
Megapixels                      : 5.6

EXIF Metadata provided by EXIF.tools