Qingdao Yeelink Information Technology YLDD02YL Light strip with Wi-Fi remote control User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3193652
Application ID	DYYndPkkZVGV2Km4bkYi5Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	33.74kB (421734 bits)
Date Submitted	2016-11-11 00:00:00
Date Available	2016-11-11 00:00:00
Creation Date	2016-11-04 18:10:22
Producing Software	PDF Editor - Foxit ¹«Ë¾
Document Lastmod	2016-11-04 18:10:22
Document Title	User Manual
Document Creator	Adobe Acrobat Pro 9.3.3
Document Author:	Stephan Huck

User Guide for
Yeelight LightStrip
Light strip (2m)
Data cable (1.5m)
* The real object prevails.
Controller
Power cable (1.5m)
Adapter*
Basic Parameters
Model No.: YLDD02YL
Operating temperature: -10 to +40℃
Color mode: RGB
Working humidity: 0% - 85%RH
Life expectancy: Approx. 25,000 hours
Light strip power input: 12V
Supported platforms: Android & iOS
Power input : 100-240V - 50/60Hz 0.5A
Wireless connections: IEEE 802.11 b/g/n 2.4GHz
Rated power: 12W (60 lights × 0.2W/LED module)
1A
Product features
Color adjustment
Brightness control
One-button operation
Scene transformation
Timer switch
Delayed switch-off
Mobile control
Firmware upgrade
Usage
Clean the installation surface
Plug in the power adapter
Stick to the installation surface
Tap to turn on the light strip, tap
again to turn off the light strip, and
press to select your desired color.
Intelligent Control
1. Scan the QR code or search “Yeelight” in the app store or google play to download Yeelight mobile client.
2. Turn on the light strip. Open the app and follow the instruction shown on the user interface to operate the light strip.
* Make sure that your Wi-Fi connection is working and you can connect to the Internet.
Factory reset
Open the power adapter and press the power button while plugging it into the power supply. Hold the
button for five seconds until the light strip displays red, green, and blue circulating lights, and then release.
The reset is complete when the light turns yellow.
* When the light strip is used on a new network, it must first be reset to its factory settings and then setup again on the new network.
Warning
1. Before using this product, please make sure that your voltage is appropriate for this product’s working
voltage. Using this product with a voltage other than the one specified may damage the product and
cause safety hazards;
2. For indoor use only.
3. Regularly check the cord, the power supply and all other parts for damage. If any part is damaged, the
product should not be used.
4. The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged,
the luminaire shall be destroyed.
5. Do not use where directly exposed to water.
6. The light source of this product is nonchangable light diodes (LED).
7. Do not disassemble the product, as the light diodes can cause damage to the eyes.
FCC Compliance Statement
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio/TV technician for help.
The satisfy FCC RF EXxposure requirements for this transmission devices, a separation distance of 20cm or more should
be maintained between the antenna of this device and persons during operation.To ensure compliance, operation at
closer than this distance is not recommended.The antenna(s) used for this transmitter must not be co=-located or operating
in conjunction with any other antenna or transmitter.Changes or modifications not expressly approved by the party
responsible for compliance could void the user''s authority to operate the equipment.
Please read this guide carefully before using the product
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.
Address: F10-B4, Bldg B, International Innovation Park, #1 Keyuanwei Rd,
Laoshan District, Qingdao City
Website: http://www.yeelight.com
Customer Service Number: 400-619-7969

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Stephan Huck
Create Date                     : 2016:11:04 18:10:22+08:00
Modify Date                     : 2016:11:04 18:10:22+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2016:11:04 18:10:22+08:00
Creator Tool                    : Adobe Acrobat Pro 9.3.3
Format                          : application/pdf
Creator                         : Stephan Huck
Document ID                     : uuid:7911517d-b20e-41c9-ab0b-e3723a27fe6d
Instance ID                     : uuid:8821f0ce-2af3-4abc-9314-45c267dbd34d
Producer                        : PDF Editor   - Foxit ¹«Ë¾
Page Count                      : 6

EXIF Metadata provided by EXIF.tools