Qiyue Optronics IRTUOSOXX60XX UHD LED IP TV User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4057874
Application ID	yENH5XFlA2uCUy9tf+E3UQ==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	418.75kB (5234315 bits)
Date Submitted	2018-11-02 00:00:00
Date Available	2018-11-02 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	cairo 1.14.6 (http://cairographics.org)
Document Lastmod	0000-00-00 00:00:00
Document Title	user manual
Document Creator	cairo 1.14.6 (http://cairographics.org)

INSTRUCTION MANUAL
Before using the TV, please read this manual thoroughly,
and retain it for future reference.
«dg k
SmarT Virtuoso
Model: RNSMU6036 LISTED
"This productis manufactured and sold by Curtis International Ltd
RCA, the RGA logo,the two dogs (Nipper and Ghipper) logo, are registered trademarks o trademarks of RCA
Trademark Management and are used under iconse by Curti Itornational Lid
Any other product, srvice, company,trade or product name and logo referenced harein are nelther endorsed
nor sponsored by RCA Trademark Management or ts aftlates
English
CONTENTS
sarety P
PRECAUTION
IMPORTANT
sarety 2
iNsTRUctiONs
Accessories 3
GETTING
STARTED 3
Remote Control 4
CONTROL Front View 5
REFERENCE Side View 5
Guibe Back View 6
WALL MOUNT 7
INSTALLATION
Installation 8
Antenna Connection 9
AV Connection 9
YPbPr Connection 10
CONNECTIONS HDMI Connection 10
Power Cord Connection 11
Optical audio output Connection 12
Putting The Unit On A Proper Place 13
INITIAL SETUP Turning The Unit On For The First Time 13
Source Selection 13
Picture Menu 14
Sound Menu 15
Function Menu 16
[VSEIOE Time Menu 17
Option Menu 18
Lock Menu 20
Channel Menu 21
10
11
12
13
14
CONTENTS
USB MEDTA
PLAYER
SMART TV
OPERATION
DISPLAY
MODE Video Formats
SPECIFICATION
TROUBLE—
SHOOTING TV Symptom
GUIDE
22
24
26
27
28
SAFETY PRECAUTION
* caution MarkiNc was LocatEp At THE REAR PLACEMENT INFORMATION
CAUTION
OF THE APPARATUS
A RISK OF ELECTRI SHOCK
D0 NOT OPEN
po not ExPosE tHis UKIT To RIN 0R MolsTuRe
[AVIS RISaUE DE cOc ELECTRIOUE— NE PAS OUVRIR
WaARNING: To REDUCE THE RISK OF ELECTRIC
SHOcK, D0 NOT REMOVE COVER (OR BACIO
No user seRViceABLE PaRts INsIDE
REFER SERVICING To QUALIFIED SERVICE
PERSONNEL
The lightning flash with arrowhead symbol,
A within an equilateral trangle is intended to
alert the user to the presence of uninsulated
"dangerous voltage‘within the product‘s enclosure
that. may beof suffcient magnitude to constitute a
risk of electric shock to persons
fl The exclamation point within an equilateral
Triangle is intended to alert the user to
The presence of important operating and
maintenance (servicing) instructions in the lterature
accompanying the appliance.
ACAUTION
«pANGER or ExPLosioN if satTeRy is
iNCoRRECTLY REPLACED. REPLACE ONLY
wirh The save or EouivateNt type
+ use or conTRro.s or ApustMents or
rerFormaNce or procepures oTHeR
THAN THose sPECIFIE MAY RESULT iN
Hazarbous Rapiation ExPosure
A warnine
«To REpUCE THE RiSk of FIRE OR ELECTRIC
sHock, bo Not ExPoSE THis APPLIANCE To
RaiN or moisture
To REVENT FIRE or SHOCK HAZARP, bo NoT
+EXPose This uNT To RAIN or moistuRe. Do
Nor puace osuecrs FiLLED witH Liauins on
or Near THis uniT
+ sHoULp ANy TRoUsLE occuRr, isconNECT
THE Ac roweR cor AN Refer serviciNe
To A aUALIFIED TECHNICIAN
@ This eqsioment is a Glass 1 or doubleinsulated
electical applance t has been designad in such a
way that it doos not requro a saaty connection to
stctrca carh
Do not use this unitin places that are extremely
hot, cold, dusty or humid.
«Do not restrictthe airflow of this unit by placing it
somewhere with poor airlow, by covering it with
a cloth, by placing it on bedding or carpeting
sareTYINFORMATION
*When connecting or disconnecting the AC power
cord, grip the plug and not the cord itself Pulling
the cord may damage it and create a hazard
* When you are not going to use the unitfor a long
period of time, disconnect the AC power cord
rarine PLaTE Locarion
The rating plate is located on the rear of the unit
ree smrements
NOTE: This unithas been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential instailation
This unit generates, uses and can radate radio
frequency energy and. i notinstailed and used in
accordance with the instructions, may cause harmful
interference to radio communication. However, there
is no guarantee thatinterference willnot occur in a
particularinstallation. f this unit does cause harmful
interference to radio or television reception, which
can be determined by turning the unit off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures
— Reorient o relacate the receiving antenna
— Increase the separation between the unit and
receiver
—Connect the unitinto an outlet on a circult different
from that to which the receiveris connected
— Consultthe deater or an experienced radioTV
technician for help
A warnine
Changes or modifications to this
unit not expressly approved by the party responsible
for compliance could void the user authority
to operate the unit
HOomI
"HDML, the HDMI logo and High—Detinition Multimedia
Interface are trademarks or registered trademarks of
HDM! Licensing LLC."
IMPORTANT SAFETY INSTRUCTIONS
1)Read these instructions
2)Keep these instructions
3)Heed all warnings
4)Follow allinstructions
5]Do not use this apparatus near water.
6)Clean only with a dry cloth
7}00 not block any ventifation openings
Installin accordance with the
manufacturer‘s instructions.
8]D0 not installnear any heat sources such
as radiators, heat registers, stoves, or
other apparatus (Including ampliiers) that
produce heat
8}Do not defeatthe safety purpose of the
polarized or grounding—type plug
A polarized plug has two blades with one
wider than the other
A groundingtype plug has two blades
and a third grounding prong
The wide blade or the third prong is
provided for your safety.
Ifthe provided plug does not it into your
wall outle, consult an electrician for
replacement of the obsolete outlet
10)Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
trom the apparatus
11}0nly use altachments / accessories specified
by the manufacturer
12)Use only with e cart, stand
tripod, bracket, or table
specife by the manufacturer,
or sold with the apparatus
When a cartis used, use caution when
moving the cart/ apparatus combination to
avoid injury rom tip—over
13)Unplug this apparatus during lightning
Storms or when unused for long periods of
time
14)Refer all servicing to qualiied service
personnel. Servicing is required when the
apparatushas been damaged in any way,
such as the power cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
15) The mains plug is used as cisconnect device,
the disconnect device shallremain reacly operable
PERSONAL SAFETY NOTICE
@ ALWAYS read and follow allinstructions for the installation and use of the TV
®@ Place the TV in a location that is level and sturdy
®@ DO NOT place the TV on a furniture with drawers that can be used as steps by small
children
© DO NOT allow children to pull the TV or climb on the furniture where the TV is placed
® DO NOT allow children to play in front of or around the TV
@ ALWAYS route all the cables connecting to the TV so the cables cannot be easily pulled and
grabbed by children.
@ When installing the TV on a wall, please purchase a TV mount recommended by a
professional TV installer, and follow the installation instructions that come with the TV mount.
@ Before installing the TV on a wall, please check to make sure the wall structure can support
the weight of the TV and the mount, If in doubt, please ask the advice from a professional TV
installer.
ACCESSORIES
Please check and identify the supplied accessories.
Remote control
Battery(AAA)
Warranty Card
Instruction Manual
Base stand
Base stand scrows
GETTING STARTED
usine ThE remore controt.
Point the remote control atthe remote sensor located on the unit
When there is a strong ambient light source, the performance of the infrared remote sensor
may be degraded, causing unreliable operation:
The recommended effective distance for remote operation is about 16 feet (5 meters).
To NstaLL the sarreries
1.Open the battery door. 2. Insert AAA‘batteris
CS
++
sartery repLAcEmMENT
When the batteries become weak,the operating distance of the remote control is greatly
reduced and you will need to replace the batteries
fyCAUTION : Danger of explosion it battery is incorrectly reptaced.
nores
Ifthe remote control is not going to be used for a long time, remove the batteries to avoid
damage caused by battery leakage corrosion
Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON—ZINC) or
rechargeable (NICKEL—CADMIUM) battories
Always remove batteries as soon as they become weak
Weak batteries can leak and severely damage the remote control
warnine:
A Do not dispose batteries in a fre. Batteries may explode or leak
Batteries shallnot be exposed to excessive heat such as sunshine, ire o the like
x1
x2
x1
x1
x2
x4
CONTROL REFERENCE GUIDE
REMOTE CONTROL
)@®
©©
®
)|©
"ffl ao (in
/ L"J
c uc
=®
@ m m
= ® ®
POWER(C): Tums the TV on or off
MUTEIR: Mute or estore the sound
Number buttons: Choose the channel directly
Decimal Point Input the decimal point
Return(Back); Return to the previousy—viewed channel
MENU: Access the main monu
SOURCE: Select the input source made
Navigation buttons: (Up/Down/Left/Right
Navigate the menu
OK: Confm the selection
HOME(ZS ): Enterthe home page
EXIT Ext the current scroon.
NETFLDC Accoss the Notx intorface.
VOL+NOL : Increases or decreasos the TV volume.
CHATCH : Change to the previous or next program
/a)
IMPORTANT NOTICE
Format : NEC
Universal Remote Code: 20DF
Code location Chart
INFO: Show the detaied information
EPG: This control button does not apply to ths product
REC(e): This contrl button does not apply to this product.
MTS: Select desired sound output depending on the
broadcasting channel
GC: Setup the mode of closed caption
SUBTITLE: Access the subtite
CH LIST Access the channellist
FAV: View your assigne favorte channels
GUICK Access the quick menu
Color Buttons(RED/GREENNYELLOWIBLUE}: Execute the
promptfunction in specific mode
PLAYIPAUSE (»it}; Pause or contiue the playback.
STOP ( ): Stop playback
FAST BACKWARDIEAST FORWARD (al>»); Fast roview of
fast forvard
Depending on the country where the TV is installed, certain apps may not be available.
The quick launch button on the remote control associated with those apps willtherefore not work
All other functionaliies of the remote will work as designed
CONTROL REFERENCE GUIDE
FRONT VIEW
About remote cantrol working distance and angle, see next page
PowerStandby Indicator: Blue and red dual—color LED. it shows red when the TV is turned off and blue when
turned on. Remote Control Sensor: Remote contral R sensor which recaives infared ray sont by remote control
NOTE: i thare is a protectiv fim around the screan, remove the protectivefm before using the TV
[Remme Gontrol Sensor
Power/Standby Indicator
SIDE VIEW
CHa: Scans up trough the channdl st in the TV monu system, it ts ke t up arraw on the remote contol n
can be used to solect man options
CH: Seans doun through the channa st in the TV menu system, it acts ike the down arow on the remote contrl
and can be used to selest menu optons
VOls: incroasos the voime. n the TV monu system, it acts ko the right arow on the ramoto contro! and can be used
to seiect en optons
Vol—Decreases the valume. in the TV menu systam. it acts ike te lt anow on the remote contraland can be used
to select meny options
O/INPUT: \When TV power of, ong pressths button to un on. When TVs on long press hs buton to un off
short ross ts button to cal ut the inout source mon, press he VOL+/— button o selecttheinoxt
source and press the power onl buton again to confim tho selecton
CONTROL REFERENCE GUIDE
BACK VIEW
U \ 1 &
OPTICAL: Digita! TV sound output
USB: Connect the USB device such as the flash disk to access the TV media function
HDMT: (High—Definition Multimedia Interface) Provides an uncompressed digital connection
VGA: Connect the PC to these jacks
MINI YPbPr: Connect the YPbPr output jack of the DVD or VCR.
RF: Connect to receive the signal from your antenna or cable through a coaxial cable
MINI AV: Connect an AV device that has compostise video jacks,such as a VCR or DVD Player
Note: PC AUDIO IN and mini AV share one port, PC audio and YPbPr audio should connect from this port.
EARPHONE: Connect a 3.5mm headset for personal audio
LAN: Connectthe Internet
WALL MOUNT INSTALLATION
INsTALLING / ReMOVING THe Base sTaND
WARNING : The LED Display is very fragile, and must be protected atalltimes when removing the base
Stand.
Be sure thatno hard or sharp object or anything that could scratch or damage the LED display. comes into
contact with it Do NOT exert pressure on the front ofthe unit at any time because the screen could crack.
1. Disconnectall cables or cords connected to the unit
2. Lay the unit down on a flat surface with the back side facing up Please make sure to place a soft
cushioned material such as a pillow or thick piece of foam ) beneath the screen
3. To remove the base stand, loosen scrows offthe holes then pull downwards to release
the base stand
PetesalSown
Oy
«
weaznn | ts
MountTINc on ThE watt
This unitis VESA—compliant, and is designed to be wall—mounted with a VESA—compliant 16‘x 8"
(400mm x 200mm) mounting kitdesigned for lat—panel TVs (not supplied)
Length of screw should benot exceed 8 mm
wore
Remove the base stand before mounting the unit on the wail
#—16" e ESn
g"
Four mounting holes
(size ms scrow)
Installation
Your TV is packaged with the stand and the cabinet separated. Before using
the TV, install the stand as described below, or if you want to mount it to a
wall, see page 7 for mounting advice; the wall mount itself is not supplied.
IMPORTANT!
* Make sure the TV set is unplugged from the power supply before
installing or removing the stand.
* The TV panel may be awkward to install on your own. We recommend
you ask someone to help with installation and/or removal of the stand.
Attaching the stand
Step 1
Place a soft cushioned material
on top of a flat surface to prevent
damaging the screen panel. Then
place the TV monitor flat on top,
with the screen side facing down,
as illustrated on the right (1).
Step 2
Align the screw holes on the
stand and the bottom of the TV,
as illustrated on the right (2).
Step 3
Tighten the screws (supplied) with
a screwdriver to affix the stand
to the panel, as illustrated on the
right (3).
NOTE: Do not apply excessive
force as this may damage the
screw holes.
CcONNECTIONS
CoONNECTING A TV ANTENNA / CABLE / sATELLITE
To view television channels correctly, a signal must
be received from one ofthe following sources:
—Anindoor or outdoor aerial antenna
—A cable system
—A satellite system
NoTE
Forreceiving over—the —air TV broadcasts, we
recommend that you use an external fixed antenna.
Should you require the use of a temporary antenna,
please ensure that you purchase an antenna with
sufficient ability o receive in weak signal areas
Only when you are in close proximity to a transmitter ©<— f\gm"_
will a temporary antenna reproduce a signal as
strongly as afixed antenna
Satellte, cable or TV antenna
cable to TV ANTENNA
conmectineanamw bevice terminal (cable notincluded)
To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc
conNEctine pevices witHAcomPosite
vipeo outPut
To connect AV devices such as a VCR, video game system or camcorder.
Connecting to a VCR/ Video Game System / Camcorder
Connect the AUDIO/ VIDEO cable (notincluded) as shown
Make sure you connect the cable from the other equipment (AUDIO and VIDEO OUT ) to this unit
(MiniAV)
wote
1. Please refer to the user manual
for the other equipment for
more information
2. Composite video input
(shared with component)
vertvors oaue
Werlt
cxitBtoe
Teaupto/vioeo
OUTjscks
Teaviorvineo
Nijscks
CONNECTIONS
connEctive a hik—DEFINITION (o) sourceusine compoNeNT conNEction
High—Detinion (HD) Deviees with component video output must be connected to the YPbPr input
Connectthe componentvideo cable and audio cable (notincluded) as shown
Make sure you connectthe component video cable and audio cable from the other equipment
(COMPONENT OUT and AUDIO OUT) to the unit COMPONENT IN
note
When connecting a DVD player tothe television,
the picture resolution is solely dependent upon
the resolution supported by the DVD player attached
DVD player resolutions vary from 480 to 1080R
and thistelevision can support DVD players up to
a maximum resolution of 1080R
* May require a subscription
forreceiving HD channels,
check with your cable/satellite
service provider for details.
Tocomponent
AUDIO INJacks
Tocomponent io sounce
ViDEO OUT jacks with component video output
(Digital Gable Box,
To conponent auno Sateilite Receiver® or Tocomponent
OUT jacks  \_ external over—the—air HD—Tuner) VIDEO Njacks
conlNectine a Hick—peFINITION (Wo) source usine HoM coNNECTION
HM!(High Definition Multimedia Interface supports both video and audio on a single digital connection
for use with DVD players, DTV, set—top boxes and other digital AV devices. HDNMI was developed to provide
the technologies of High Bandwidth Digital Content Protection (HDCP) as wellas Digital Visual Interface
(DVI) in one specification. HDGP is used to protect digtal content ransmitted and received by
DVi—compliant or HDMIcompliant displays
HM! has the capabilly to support standard, enhanced or high—defintion video plus standard to
mult—channel urround—sound audi HDM features include uncompressed digitalvideo, a bandwidth of
up to 2.2 gigabytes per second (wih HDTV signals), one connector (istead of several cables and
connectors), and communication between the AV source and AV devices such as DTVs
Connect the HDMI cable (not included) as
shown
Make sure you connectthe cable from the
source equipment ( HOMI OUT ) tothis unit
(Homtn )
C Hom caste
(wot inctuben) . Ho source
With component video output
map
To HOMI external over—the—air HD—Tunen)
OUT jack
To Homt
Ijack
10
CONNECTIONS
conNEctine ThePower corn
You can power on your TV unitbefore you make sure the powar card is inserted well
Althe same tme, please check thatthe rated voltage of your unit matches your local
Voltage
nore
+ Insertthe power plug full into the sacket outlt
(Ifthe powerplugisloose itcould generate heat and
cousetire )
* Ensure that the power plug is easily accessible:
* Ensure the earth pin on the power plug is securely
connected t provent electreal shock
* Do nottouch the power plug with a wet hand
(This may cause electralshock)
* Do notuse any power cord otherthan that provided
with this TV. (This may cause ie or electrcal shock.)
* Do not damage the power cord
(A damaged cord may cause ire or electrial shock.)
* Do not move the TV withthe cord plugged in the
socketoutlot
* Do not place a heay object on the cord or place
the cord near a high—tomparature object
* Do not twist the card, bend it excessively, o stretch it.
To AC wall cutet
* Do not pullonthe cord. Hold onto the power plug body when discomnecting cord
* Do not use a damaged power plug or socket outlot
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 15
Creator                         : cairo 1.14.6 (http://cairographics.org)
Producer                        : cairo 1.14.6 (http://cairographics.org)

EXIF Metadata provided by EXIF.tools