Qiyue Optronics IRTUOSOXX70XX UHD LED IP TV User Manual II

Shenzhen Qiyue Optronics Company Limited UHD LED IP TV II

Contents

user manual II

Download: Qiyue Optronics IRTUOSOXX70XX UHD LED IP TV User Manual II
Mirror Download [FCC.gov]Qiyue Optronics IRTUOSOXX70XX UHD LED IP TV User Manual II
Document ID4054241
Application IDBOnjGeSEgRJ+8jMNwZGpMQ==
Document Descriptionuser manual II
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize381.08kB (4763457 bits)
Date Submitted2018-10-31 00:00:00
Date Available2018-10-31 00:00:00
Creation Date2018-10-31 11:44:30
Producing Softwareitext-paulo-155 (itextpdf.sf.net-lowagie.com)
Document Lastmod2018-10-31 11:44:30
Document Titleuser manual II
Document Creatorpdftk 2.02 - www.pdftk.com

CONNECTIONS
Connection to a Home Theater Audio System
For BEST audio performance
Connecting to a Home Theater System
Dolby Digital can deliver optimal 2 channel
stereo or surround sound with five discrete
full range channels plus a sixth channel for
a subwooter
Enjoy optimal sound reproduction from your
system with a Dolby Digital amplifier that
incorporates a digital optical input. Connect
an optional digital cable directly to the
television‘s optical audio output to
listen through all inputs except VGA.
(The VGA does not support digital audio)
doryPcge
sorheana
on
Spemr
rowme
Spone
o &
4.
> M y A
o0 of0 oo oo
dobySuraid
Correcan msrace
SursondtatSpomiar P
SuroidaniSoenir
How To Setup Digital Audio Output
Press the MENU button on the remote control
Press the right > arrow button to select sound
Press the down Y arrow button to highlight
Digital Audio Output » Audio, PCM
Lo Ees
o Ees
es Lo
Tme l
Sets
es
Cas
Optional digital cable
(not included)
"NOTE: Referto the User Manual from your home theater
Somate
equipment forrecommended audio setings.
12
INITIAL SETUP
PUTTING THE UNIT ON A PROPER PLACE
When you turn on your television set for
the first time, be sure to place it on a solid
stable surface
To avoid danger, do not expose the TV
to water, or a heat source
(e.9.lamp, candle, radiator).
Do not obstruct the ventilation grid
at the rear and be sure to leave sufficient
gaps around the unit.
TURNING THE UNIT ON FOR THE FIRST TIME
After you have initially connected your TV antenna or cable, turn the television ON.
Ascreen will display asking you to select a Language, Country and Internet
Ceered
Poes
Em
Select option of Auto Tuning under the up and down keys .
on suitable location and the auto tuning will begin
Ceeess Auto Search
o es
Lo
SOURCE SELECTION
1. Press the SOURCE button on the remote control
2. Use the Anrvbum‘m to select the options (TV,AV.Component HDML,USB)
and select any of them using the OK button. (The sereen will change to your desired source).
Inpm Source
AV _ Component . PC HDMI1 _ HDMIZ P
hleiciecs
Note
Before watching please make sure all necessary cables and devices are connected
13
TV SETUP
Picture Menu
Press MENU button to display the main menu
Press < / > button to select PICTURE in the main menu,it will highlight the first option
oo uced
Eoc eaicsa
sc Erhiabes
is Color
m Sharpness
Tint
ols
Backlig
isuus
Color Temperature
Picture Mode: Choose among Sports, Normal, Mild, Save and User. The following
five items (Contrast, Brightness,Color, Sharpness and Tint) can be adjust only when
the picture mode is set to "User" mode.
Contrast: Adjust the difference between light and dark areas of the picture
Brightness: Adjust the lightness of the picture
Color: Adjust the richness of the picture.
Sharpness: Adjust the edge of the picture
Tint: (Only for some sources) Adjust the tint value of the color.
Backlight: Adjust the backlight value of the TV screen
CGolor Temperature: Select the overall color tone of the picture. Choices are Cool,
Standard and Warm
TV SETUP
Sound Menu
Press MENU button to display the main menu
Press / > button to select SOUND in the main menu, t will highlight the first option.
oo botpnbed
Eoc Balance
sc us
& Boe tssn
Time
Nee cssc
Option 8 h
Digital Audio output
Lock Audio Languages
isuus bau
Sound Mode: Choose among Standard, Music, Movie, Sports and User. The value of
120Hz, 500Hz, 1.5KHz, 5KHz or 10KHz can be adjusted only when the sound mode
is set to "User"mode.
Balance: Control the sound balance between the right and left speaker
AVL: Turn on to adjust the sound volume depending on the input signal.
Surround Sound: Help to create rich and wider sound from stereo sound sources.
Video Description: Turn on or turn off the video description function to help the blind
or visually impaired viewers
Digital Audio Output: Set the digital audio output mode to PCM or Auto.
Audio Languages: Set the primary or secondary digital audio language
corresponding to the signal.
TV SETUP
Function Menu
Press MENU button to display the main menu
Press < / > button to select FUNCTION in the main menu, it will highlight the first option.
fl oo Noise Reduction
{37 Eoo scb sb cc
Aspect Ratio
@ Function
8 Mss
s ME
P ioi NEuppeemteo
e Netflix ESN
@) Lock
" Netflix Version
isuus E—Manual
Noise Reduction: Eliminate noise in the picture. Choices are Off, Low, Middle, High
and Auto.
MPEG Noise Reduction: Eliminate noise generated while converting or compressing
MPEG signals. Choices are Of, Low, Middle and High. Aspect Ratio: Select the
aspect ratio (display proportions) according to your video signal type or preference
Choices are 4:3, 16:9, Movie, Native and Panorama
Note: The choices of aspect ratio differ by different regions or sources
Link Setup: Command and control HDM| devices connected to the TV set.
1. Enable Link: Turn on or turn off HDM! Link function.
2. Auto Power On: Turn on to power on the TV set automatically when you turn on the
HDMI device.
3. Auto Standby: Turn on to change the HDM! device to standby mode automatically
when you turn off the TV set
4. Device Select: Select the HDMI device from the device list
HDMI EDID: Switch the version of Extended Display Identification Data.
Netflix Deactive: Logout your your Nethiix user account.
Netflix ESN: Check the Netfix ESN number.
Netflix Version: Check the Nethix SW version.
E—Manual: Electronic Uesr Manual
TTS: Setup the function of Text—to—Sound
1. TTS: Turn on or turn off the TTS function. The following four items can be adjusted
only when TTS is turned on.
2. Verbosity: Select the verbosity level.
3. Rate Support: Select the sound speed
TV SETUP
Time Menu
Press MENU button to display the main menu
Press < / > button to select TIME in the main menu, t will highlight the first option:
oo Off Time
Sound On Time
sc Bleep Timer
Auto Sleep
Time
LuooShg
Option Cpece
l Time Zone
isuus
Off Time: Setup the repeat mode and timer to turn off the TV set.
On Time: Setup the repeat mode and timer to turn on the TV set.
Sleep Timer: Set to turn off the TV set automatically. Choices are off, 10, 20, 30, 60,
90, 120, 180 and 240 minutes
Auto Sleep: Setup the timer to turn off the TV set automatically when there is no
operation. Choices are Off, 4 hours, 6 hours and 8 hours.
Auto Sync: Turn on or turn off the function of Auto Sync
Clock: Setup the TV clock (Day, Month, Year, Hour and Minute). !tis available only
when Auto Sync is turned off.
Time Zone: Select the time zone. It is available only when Auto Sync is turned on
TV SETUP
Option Menu
Press MENU button to display the main menu
Press < / > button to select OPTION in the main menu,it will highlight the first option.
n ced OSD Language
G} Sound Soled
@ Function Closed Caption
esd
Time
Network
S " e
Software Update(USB)
@) Lock Eoo mbecesy
eaeuue Network Update Information
OSD Language: Select your desired OSD language.
OSD Time: Select the time to keep the OSD display on the screen.
Closed Caption: Setup the function of Closed Caption
1. CC Mode — Select the CC mode. The following three items can‘t be adjusted when the
CC Mode is turned off.
2. Basic Selection — Select the basic CC type
3. Advanced Selection —Select the advanced CC service type
4. Closed Caption Option — Adjust the detailed CC settings such as font, color and so on.
Reset: Restore Menu options to the factory defaults, and restart the initial setup
Note: User data on this TV will lose completely after operating this feature.
Network:
1. Status: Check the detailed information of network connection such as IP, MAG
Address and so on
2. WIFI: Setup to connect the TV set to the Wireless Network
3. LAN: Setup to connect the TV set to the Wired Network
Software Update (USB): Select to update Software from USB
Software update (NetReady): Select to update software by network connection.
Network Update Information: Show network update information such as software
version and so on.
TV SETUP
Option Menu
How to connect to WIFI?
Press MENU button to display the main menu
Press 4 / > button to select OPTION in the main menu, choose the Network
After pressing the OK button, select WIFI
6 Network
Do you want to set Netwok?
ts
Ses
Select to WIFI setting and turn on the WIFI, select your WIFI network and enter the password,
then select the Setting to connect the WIFI. If you want to connect a new WIFI network, please
select to WIFL item and press the OK button from the remote, it will search some new WIFI
network nearby the TV, select the WIFI network and enter the password to connect it
ts
esn
Ees Now
TV SETUP
Lock Menu
Press MENU button to display the main menu
Press < / > button to select LOCK in the main menu it will highlight the first option.
Weue s sSEcy
Botue Set Password
sc USA TV Rating
USA MPAA Rating
Canada English TV Rating
Time
nsl Canada French TV Rating
Lock RRT Setting
Channel RRT Reset
input the initial password(0000) or your own password to access this feature, then press
OK button to enter the following features
Lock System: Select On to enable the following eight items.
Set Password: Use to change the current Lock password
USA TV Rating: Block or unblock programs according to USA TV Rating
USA MPAA Rating: Block or unblock programs according to USA MPAA Rating.
Canada English TV Rating: Block or unblock programs according to Canada English TV
Rating.
Canada French TV Rating: Block or unblock programs according to Canada French TV
Rating.
RRT Setting: Adjust the settings of RRT(Region Rating Table)
RRT Reset: Reset the RRT settings to the defaults
Note: If you change the password and forget it, you can use the super password 8899 to
enter the lock system.
20
TV SETUP
Channel Menu
Press MENU button to display the main menu
Press < / > button to select CHANNEL in the main menu,it will highlight the first option.
oo AntennalCable
Sound Auto Search
Function Program Edit
DTV Manual Search
ATV Manual Search
Time
Option
Brelicueit
ols
Channel
Antenna/Cable: Select the tuner mode between Antenna and Cable.
Auto Search: Search for programs automatically. If you want to stop the auto search,
prees EXIT button. Then Select "Yes" to exit searching and "No" to continue searching.
Program Edit: Edit the programs. You can press RED button to delete programs,
press BLUE button to skip programs, and add programs to the favorite list by pressing
Yellow button
DTV Manual Search: Search for the DTV programs manually. The search stops when
a program is found and this program will be stored automatically. Press EXIT button to
exit the searching. Before DTV manual search, you need to Select the desired UHF
cH.
ATV Manual Search: Search for the ATV programs manualy. When a program is
found, press RED button to save it. Press EXIT button to exit the searching. Before
ATV manual search, you need to select the desired Current Channel. Ifthe signal is
weak of distorted, you can select "Fine Tune" to adjust the frequency slightly until the
image is clear.
Signal Information: Show the signal information of current DTV channel
21
USB Media Player
USB Media Menu
Before operating Media menu, Plug in USB device, then press INPUT button:
Press ¥/& button to select USB Media Player in the Source menu, then press Enter button to enter.
Press 4/>> button to select the option you want to adjust in the main Media menu,
then press Enter button to enter.
Photo Menu
Press > button to select PHOTO in the main menu, then press Enter button to enter
Press > button to select drive disk you want to watch, then press Enter button to enter.
Press > button to select retum option to back to the previous menu.
Press 4/>> button to select the file you want to watch in the fle selecting menu,
then press media button to display picture
Press > button to select the file folder you want to search in the fle selecting menu,
then press Enter button on your remote control to enter sub—menu
22
USB Media Player
Movie Menu
Press 4/>> button to select Movie in the main menu, then press Enter button to enter.
Press menu button to return back to the previous menu and exit menu to quit
Press 4/>> button to select drive disk you want to watch, then press Enter button to enter.
Press 4/>> button to select the file you want to watch in the file selecting menu, then press
Enter button to add the file o play list, press media button to display and operate fle details.
NOTE: It can not play music and TEXT format
23
Smart TV Operation
Smart TV Operation
Press HOME button on the remote control to enter the Main Launcher
Press the arrow buttons 4/>> to select the APP, then press "OK® button to enter.
esc ——
Lc ETess
NETFLIX | _ YOU can press ‘NETFLIX® button or press HOME button select the NETFLIX to enter.
After enter the NETFLIX you can see below login interface,input your account and passwordpress
"OK" button, then you can enjoy the NETFLIX resources.
Press the arrow buttons
After enter the FACEBOOK you can see below login interface with 8 random code, first pls visit
hitp:!/www facebook.com/device on your smart phone or computer and enter this code.
Second input your facebook account and password then login in
Third enter the 8 random code which marked in the first picture. Then you can success to use facebook.
es e
> to select the Facebook, then press "OK® button to enter.
a~
semmu
24
Smart TV Operation
1. Use arrow key to Select button, then press "ENTER‘ key to enter Youtube
2. Use arrow button to select one video and press "ENTER‘ ky to play. Press ‘Menu" key to exit laying.
3. Press ¥ key to open or close control menu when playing
4. Press & key to enter search interface, inputthe keyword and then press ENTER" to search videos
Ipandora: | Use arrow key to Select button, then press "OK" key to enter pandora
cesc
NECcbceco
Do you have a pandora account?
- Press the arrow buttons /: to |__.___] 1. Use arrow key to Select button, then
select the Mirashart, then press press ‘ENTER" key to enter Accuweather
"OK" button to enter 2. Input a city or zip code pr ess select to
get the weatherinformation.
Note: Please nots thatdeponding on the mobledevie,
Screencast may not oporat as nleated
25
DISPLAY MODE
VIDEO FORMATS
sUPPORTED COMPONENT / HDMIINPUT MODE
Horizontal Vertical
Resolution . |Scanning Frequency Scanning Frequency Format
( KHz) (Hz)
720 x 480 15. 73 59. 94 480
720 x 480 31.5 59. 94 480 p
1280 x 720 45 60 720 p
1920 x 1080 33. 75 60 1080 i
1920 x 1080 27 24 1080 p
1920 x 1080 60 1080 p
3840 X 2160 24 2160p
3840 X 2160 30 2160p
3840 X 2160 60 2160p
NOTE:
The above listed formats are also related to the AV devices you are about to connect
Before you connect this unit with others please read all instructions carefully and
make sure all necessary cables are connected
This unit may be incompatible with some other formats which are not meet the
above conditions
26
SPECIFICATION
Model Description Cdal
Panel Type LED Pane!
Diagonal Size Toinches
Sereen Fomat 16e
Resohition: 3e40x 2100
Pane! . |Erighiness 300 caim
Contrast 4000:1
View Angle womprrew
Response Time 8.0ms
Maximum Golor 16.7hi coors
Color System NTsciarse
Systems | Sound System mhits
Sound Output UR Speaker: tOW+1OW
RF Input 75 ohm extemal terminal
HOM input 450. 4e0p. 209. 1080 100p. 21605
Composite Video Input 1.0 Vp—p, 7Sohms
Input/
oubput Y: 1.0Vp—p, 750hms, 0.3Vnegative syne
Jacks . | Component¥ Pb Pr Input . | Pb: 0.7¥p—p, 7Sohms
Pr:0.7Vp—p, 7Sohms
AV AUDIO: For CVBESICOMPONENT Audio input
Sound Inout 500mV ims, Impedance: 20% ohms
Digital audo out siPDiF Optical
USB Port Media player
Power Requrement 100—120v—60Hz
Power
Rated Power Consumpton . | 1O7W
This manual is only for your reference.
Specifications are subject to update without prior notice.
27
TROUBLESHOOTING GUIDE
SYMPTOM
TV
Bad Picture (snow,
multiple images
distortion,blurry)
No sound
Black and White
picture.
No picture or sound.
Coloredpatches of
picture.
Panel function key does
not respond correctly.
The display monitor‘s
panel goes hot.
Unusual dots
Stripes on screen
The top of the monitor
gets hot
Unable to select a
certain channel.
Disorder display
at power on.
CAUSE (AND REMEDY )
Check the location of the antenna and adjust it if necessary.
Make sure the antenna cable is firmly connected.
Make sure all input cables are firmly connected.
Increase the volume
Check whether the mute function has been activated on the
Remote Control.
Check the PICTURE setting within the PICTURE menu.
Check to make sure the program you are watching is broadcast
in Color and not Black & White.
Make sure the unit is plugged in and turned on.
Make sure that the ATV mode is selected.
Try a new channel to check for possible station trouble.
Make sure the antenna is connected properly.
Increase the volume.
Make sure the antenna or audio/video source device is
working properly.
Make sure all cables are firmly connected.
Check for local interference.
Make sure there are no unshielded electrical devices nearby
that are causing interference.
Turn the TV off for 30 minutes, then try it again.
Under the influence of electrostatic phenomenon, the product
may malfunction and require usertopowerreset.
Unplug and re—plug the AC power cord.
LED TV takes inside lighten phosphor. It may increase the
temperature of the screen in some occasions. It‘s not a defect.
Black dots and Bright points may appear on the LED screen.
This is a structural property of the LED panel and is not a defect.
Adjust the impulse phase may decrease stripes. . RGB in
It may occur during long—time working. It‘s not a defect.
The channel may be skipped. Choose this channel by
directly selecting the buttons from the remote control.
This may be caused because of a very short interval
between POWER OFF and ON
Unplug the power and restart
28
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions
(1) this device may not cause harmful interference, and,
(2) this device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the party responsible
for compliance could void the user‘s authority to operate the equipment.
Note 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Note 2: 1.Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user‘s authority to operate the equipment.
2. The minimum separation generally be used is at least 20 cm.
|Company Name: Curtis International Ltd.
|Company Address foas srcgert Deive, unit 15, wiSsiSAUGA, ON, LsS 213
elephone: 1—#00—068—o858 Fax: 1—#00—968—o8ss

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Modify Date                     : 2018:10:31 11:44:30+01:00
Create Date                     : 2018:10:31 11:44:30+01:00
Creator                         : pdftk 2.02 - www.pdftk.com
Producer                        : itext-paulo-155 (itextpdf.sf.net-lowagie.com)
Page Count                      : 18
EXIF Metadata provided by EXIF.tools
FCC ID Filing: XOMIRTUOSOXX70XX

Navigation menu