Qolsys QS2100 IQSmartSocket is a Dual Socket that is controlled remotely and measures electricity User Manual Installation manual

Download:
Mirror Download [FCC.gov]
Document ID	2124098
Application ID	96BVI58Ecf3cm+flTcFnHw==
Document Description	Installation manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.62kB (332807 bits)
Date Submitted	2013-11-21 00:00:00
Date Available	2013-11-21 00:00:00
Creation Date	2017-10-25 00:56:04
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-25 00:56:04
Document Title	Installation manual

IQ SMART SOCKET- INSTALLATION MANUAL
IQ SMART SOCKET
The Qolsys IQ Smart Socket is an intelligent Z-Wave outlet
that not only provides the ability to turn devices on or off but
measures their current and historical energy output from the
built in LCD screen and from the IQ Panel interface.
PRODUCT FEATURES
PARTS INCLUDED
1 IQ Smart Socket
•Provides two individually controlled outlets and green LED lights to
indicate each power on. (Max current 15A or 1800W total)
•Separately measures energy consumed by two individual attached
devices in real-time
•Displays individual outlet’s power consumption and constant power
rate
•Displays real-time power consumption per outlet
•Sends current power consumption to IQ Panel via Z-Wave radio
•Can be controlled remotely by IQ Panel, to switch each socket on
and off or to configure the Smart Socket control parameters.
•Sends all configuration status information to the IQ Panel
whenever manual button push configuration changes are made on
the Smart Socket.
•Design includes three buttons, one at bottom of the device and
two on the sides of the device
•Design includes one Smart Socket Control button on the bottom of
the device that shall perform the following functions:
• include/pair the smart socket to/from Z-Wave network & IQ Panel
•locally reset and un-pair the smart socket to/from IQ Panel
•Design includes two side mounted Power Outlet Control buttons,
one for each socket.
•Each button shall perform the following functions:
• turn on/off each outlet
•reset the meter data for each outlet
•turn on LCD display and LED back light for both outlets
•switch from kWh to Watts display units for each outlet
•Generate supervisory status signals and transmit to IQ Panel
QOLSYS CONFIDENTIAL AND PROPRIETARY PAGE 1 OF 4
© Last revised 11/4/13 All rights reserved
IQ SMART SOCKET- INSTALLATION MANUAL
HARDWARE OVERVIEW
LCD SCREEN
The front of the Smart Socket has a multi-function LCD display that
communicates the power measurements and status information to the user.
There are two independent power outlet sockets, one on each side of the
IQSmartSocket device. There are two green LED lights on the side of the
device so that you may always know if the power is actually on for each of the
sockets. The green light will be lit if the power to that socket is on and the light
will be off if the power is off. Additionally, there are two Power Outlet Control
buttons, one on each side of the IQSmartSocket, that provide control functions
for each separate power outlet socket. These two buttons allow the user to
manually toggle the power on / off for each separate outlet. The Power Outlet
Control buttons also allow the user to change the power measurements and
units.
The IQSmartSocket also has one additional button on the bottom of the
device. This Smart Socket Control button allows the user to pair the Smart
Socket with the IQ Panel. Additionally, this button allows the user to un-pair
the IQSmartSocket from the IQ Panel and clear the device to enable re-pairing.
Each side of the display shows the
cumulative power consumption
value (kWh) or power rate value
(Watts) of the corresponding outlet.
Indicates
the power of
smart socket is cut-off for one or
more of the following reasons: total
current reaches 17A which is 10%
ove r d e s i g n e d m a x i m u m 1 5
Ampere, temperature exceeds
60 o C, and/or voltage exceeds
140V or is less than 95V
Securing
bracket
Indicates
outlets are
LCD
Display
t h at b ot h of
powered off.
•Indicates the device is paired with
the IQPanel.
Socket 1
LED light
Side 1
control
button
“Learn” button
(hold for 30 sec to reset device)
Z-WAVE TECHNOLOGY OVERVIEW
Z-Wave is a proprietary half-duplex wireless
communications protocol designed for home automation.
The technology uses a low-power RF radio embedded into
home electronics devices and systems, such as lighting,
home access control, entertainment systems and household
appliances. The Z-Wave wireless protocol is optimized for
reliable, low-latency communication of small data packets.
Operation Frequency
Modulation
Bandwidth
Range
Operating Temperature
Device Activated Time
Total Nodes in one Network
QOLSYS CONFIDENTIAL AND PROPRIETARY
© Last revised 11/4/13 All rights reserved
908.42(USA)
BFSK/GFSK
9.6 Kbps with a raise to 40Kbps
fully interoperable
Indoor (30m), “open air”
condition (100m)
-35C—120C
5ms
232
PAGE 2 OF 4
IQ SMART SOCKET- INSTALLATION MANUAL
PAIRING THE IQ SMART SOCKET
To expedite the pairing process be sure to plug the IQ Smart Socket into an outlet near the IQ Panel. Once pairing
is complete the IQ Smart Socket can be moved to any outlet within range.
From the home screen of
the IQ panel, press the
“Settings” icon
Enter the installer passcode.
Default installer passcode is 1111
Select the “Installation” app
Select the “Z-Wave Devices” app
Select “Add Device”
A chime will sound
Press and release the buCon
on the boCom of the device
Click “Ok”
Check the auto-populated fields to ensure accuracy. Change the
settings as you see fit.
Create custom names by selecting “Sensor name” and choosing “Custom
description.” A box will appear to the right. Selecting that box will open a
keyboard, allowing you to type the name of your choice into the field.
10
Click “Save” to complete the process
QOLSYS CONFIDENTIAL AND PROPRIETARY
© Last revised 11/4/13 All rights reserved
PAGE 3 OF 4
IQ SMART SOCKET- INSTALLATION MANUAL
UN-PAIRING/RESETTING
MANUAL RESET
•Plug in the IQSmartSocket somewhere near the IQ Panel
•On the IQ Panel, use the installer passcode to access the Z-Wave
installation functions under Settings / Installation / Z-Wave Sensors.
•Press the “Clear Device” function on the panel
•Next, press the Smart Socket Control button (at the bottom of the
IQSmartSocket) - for this function, the user must press the button for
at least 50 milliseconds and not hold down the button for more than
2 seconds … otherwise the pairing signals will not be sent to the IQ
Panel.
•The user next needs to go the IQ Panel to verify that the smart
socket is unpaired (no longer in the list of Z-Wave devices that are in
the system).
•User should now see that the pairing “Q” symbol should have
disappeared, this means that the IQSmartSocket is now unpaired with
the panel.
CONTROL BUTTONS
The Power Outlet Control buttons
will allow the user to change the
displayed power units and
measurements.
To reset the IQSmartSocket to factory settings
simply press the “Learn” button and hold it
down for at least 30 sec. The socket will clear
the pairing information (but only on the smart
socket itself, any panel pairing information on
the panel will not be cleared with this function.
The pairing “Q” symbol will disappear and the
socket is now ready for re-pairing or to use
manually.
AGENCY COMPLIANCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This Class [B] digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe [B] respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.
15.19
FCC & IC Statement:
FCC: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
ENVIRONMENTAL
Operating Temperature: -10C~50C
Relative Humidity: 5-95% NonCondensing
Storage Temperature: -40-80C
IC Statement: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.
IMPORTANT! Changes or modifications not expressly approved by Qolsys Inc. could void the user’s authority to operate
the equipment.
PHYSICAL SPECS
Smart Socket: 4.8H x 3.3W x 1.5D in.
Document#: IQSS-IM-11-13
Revision#:11/18/13
Issue Date: NOV 2013
IQSMart Socket Product #: QS-2100-p01
Firmware : 2013_06_05_9D7C
Conforms to ANSI/UL Std. 498A
Certified to CAN/CSA Std. C22.2#42
Qolsys Inc. proprietary.
Reproduction without permission is not permitted.
QOLSYS CONFIDENTIAL AND PROPRIETARY
© Last revised 11/4/13 All rights reserved
PAGE 4 OF 5

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 4
Warning                         : Bad Info reference

EXIF Metadata provided by EXIF.tools