Quanshun Communication Technology TPN5X PTT Network Radio User Manual N5 Series
Quanshun Communication Technology Co., Ltd PTT Network Radio N5 Series
Users Manual
Cover:
TalkPod(logo)
PTT Network Radio
OWNER’S MANUAL
Back Cover:
TalkPod(logo) is the trademark or registered trademark of Quanshun Communication
Technology Co., Ltd.
C 2016 Quanshun Communication Technology Co., Ltd., All Rights Reserved.
Address: Quanshun Bldg., Daxiamei, Nan'an, Quanzhou, Fujian, China 362302
http://www.talkpod.us
Printed in China.
Thanking info:
Preface
Thanks for your favor in our product. This manual is helpful for you to quickly know how to use
the prodcut.
Instructional Icons
logo: Indicates functions that are available on digital channel only.
logo: Indicates functions that are available on analog channel only.
Functions marked with no function icons are available on both analog and digital
channels.
Disclaimer
Quanshun Communication Technology Co., Ltd. (the Company) endeavors to achieve the
accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All
the specifications and designs are subject to change without notice due to continuous technology
development. No part of this manual may be copied, modified, translated, or distributed in any
manner without the express written permission of us. We do not guarantee, for any particular
purpose, the accuracy, validity, timeliness, legitimacy or completeness of the Third Party porducts
and contents involved in this manual.
If you have any suggestions or would like to learn more details, please visit our website at
www.talkpod.us.
RF Radiation Profile
Radio Frequency (RF) is a frequency of electromagnetic radiation in the range at which radio
signals are transmitted. RF technology is widely used in communication, medicine,
food processing and other fields. It may generate radiation during use.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference,
And (2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Operational Instructions and Training Guidelines
To ensure optimal performance and compliance with the occupational/controlled environment RF
energy exposure limits in the above standards and
● RF energy will be generated only when the radio is transmitting.
●
EU Regulatory Conformance
As certified by the qualified laboratory, the product is in compliance with the essential
requirements and other relevant provisions of the Directive 1999/5/EC.
Please note that the above information is applicable to EU countries only.
Contents
Items in the Package
Product Overview
Product Controls
Before Use
Assembling the Radio
Charging the Battery
Status Indication
LED Indicator
Basic Operation
Powering On/Off
Adjusting the Volume
Selecting a Group
Selecting a Member
Selecting a Friend
Call Services
Calling on Digital Channel
Calling on Analog Channel (No Signaling)
Features and Operations
Troubleshooting
Care and Cleaning
Optional Accessory
Items in the Package
Please unpack carefully and check that all items listed below and the Radio x 1 are received. If
any item is missing or damaged, please contact your dealer.
Note: The antenna may vary with different frequency bands. And the frequency band is marked on
the label of antenna; if not, please refer to the label on the radio unit for frequency band
guidelines, users should always adhere to
the following procedures;
The radio must be used with 2.5 cm away from mouth when transmitting. When worn on the body,
please always use the approved accessories (e.g. clip). Use non-approved accessories may result
in exposure levels which exceed the FCC's population/uncontrolled environmental RF exposure
limits.
information.
Note: All pictures in this manual are for reference only.
Product Controls
1) Channel Selector Knob
2) On/Off/Volume Control Knob
3) LED Indicator
4) Push-to-Talk (PTT) Button
5) Side Button 1 (Programmable)
6) Side Button 2 (Programmable)
7) Okay/Menu Button
8) Front Button P1 (Programmable)
9) Navigation Button
10) Return Button
11) Front Button P2 (Programmable)
12) Keypad
13) Display
14) Microphone
15) Speaker
16) Universal Connector for Accessories
17) Antenna
Record you radio’s Programmable button functions in the blanks provided. SP represents short
press, LP represents long press.
Before Use
Assembling the Radio
Attaching the Battery
Click,
Note: Turn off the radio before removing the battery.
If not assembled with battery specified by Talkpod, the radio will give an alarm tone to remind
you when powering on. Afterwards, it will operate normally.
Assembling the Antenna
Assemble, Disassemble
Note: Do not swing the radio when holding it by the antenna, so as to avoid lowering the
performance and shortening the life span of the antenna.
Assembling the Belt Clip
Assembling the Accessories
Charging the Battery
Please use the charger specified by the company, and follows the charging step as shown below
Charging Status
Blinking Red, Unchargeable
Blinking Orange, Waiting to charge.(Either the battery Voltage is too low or the battery
temperature is to low or too high to allow charging. When this condition is corrected, the battery
will automatically begin charging.)
Steady Red, Rapid Charging
Blinking Green, Charged (90% capacity)
Steady Green, Fully Charged.
Note:
Make sure the radio is powered off before charging. Read the Safety Information Booklet in
advance to get necessary safety information.
To achieve optimal battery performance, please charge the battery for at least 5 hours before initial
use.
Status Indication
LED Indicator
LED Indication, Product Status
The LED indicator flashes green, Powering on
The LED indicator glows green, Receiving
The LED indicator glows red, Transmitting
The LED indicator flashes green, Login the network
Long Press the PTT button, The LED indicator glows green, enter programming mode
Basic Operations
Powering On/Off
Adjusting the Volume
Selecting a Group
For N50
After the radio is powered on, you can rotate the selector knob to select an appropriate Group.
For other radios
After the radio is powered on, pls turn to select group screen, then you can either select the group
directly in the screen or rotate the selector knob to select an appropriate Group.
If the channel Notify feature is enabled by your dealer, the radio will play the channel number
upon channel switching.
Selecting a Member
Not available for N50
After the radio is powered on, pls turn to select member screen, then you can select the member in
the screen.
Selecting a Friend
Not available for N50
After the radio is powered on, pls turn to select Friend screen, then you can select the Friend in the
screen.
What is the different between member and friend.
Member is belong to a group, while friend is not.
Call Services
After the radio is powered on, you can make different kinds of calls. To ensure optimal volume of
the receiving radio, keep the microphone about 2.5 to 5 centimeters away from your mouth when
transmitting.
The types of calls you may initiate are listed below:
● Group call: A call made to the group contacts.
● Private call: A call made to a private contact: member call or friend call. (not available for
N50.)
Care and Cleaning
To guarantee optimal performance as well as a long service life of the product, please follow the
tips below
Product Care
● Do not pierce or scrape the product with any edged instruments or hard objects.
● Keep the product far away from substances that can corrode the circuit.
● Do not hold the product by its antenna or earpiece cable directly.
● Attach the accessory jack cover when the product is not in use.
Product Cleaning
Turn off the product and remove the battery before cleaning.
● Clean up the dust and fine particles on the product surface and charging piece with a clean and
dry lint-free cloth or a brush regularly.
● Use neutral cleanser and a non-woven fabric to clean the keys, control knobs and front case
after long-time use. Do not use chemical preparations such as stain removers, alcohol, sprays or
oil preparations, so as to avoid surface case damage.
● Make sure the product is completely dry before use.
Optional Accessories
The following items are the main optional accessories for the radio. For more information of other
accessories, please consult your local dealer.
Note: Use the accessories specified by Talkpod only. If not, the Company shall not be liable for
any losses or damages arising out of use of unauthorized accessories.
Power Supply
TCA01 US/NA plug, AC/DC Adaptor
TCA02 Euro plug, AC/DC Adaptor
TCA01 UK plug, AC/DC Adaptor
TCA01 Australia/NZ plug, AC/DC Adaptor
TBC01 Standard Desktop Charger
TBC02 Repaid Desktop Charger
TBL01 Standard Li-Ion Battery
TBL02 High-Capacity Li-Ion Battery
Aduio
TEM01 2-Wire Earloop with Earbud Earpiece
TEM02 2-Wire Earbud Earpiece
TEM03 2-Wire Acoustic Tube Earpiece
Carry Accessories
Non-Keypad Carrying Case
Limited Keypad Carrying Case
Full Keypad Carrying Case
Multi-touch Carrying Case
Talkpod PTT Network Radio N5 Series
Programming Guidance
1. SIM card installation.
1) Please ensure the SIM card you are using supports either one of below two frequencies:
WCDMA Bands 2100/900MHz, GSM Bands 900/1800MHz (mainly used in Europe)
WCDMA Bands 1900/850MHz, GSM Bands 850/1900MHz (mainly used in America)
2) Please check that the SIM card can connect to the network by placeing it into a smart phone.
3) The SIM card only requires the data stream when used by this equpment, so you can buy the
data only SIM card.
2. Corget account preperation.
Currently, we use the Corget platform, you can visit http://www.corget.com/en/fanga.php?id=14 to
obtain more information about the platform.To use their servers, you need to buy accounts from
them (one account for one radio).
An account per year is about 25USD, and you can buy the accounts directly from them at
smart-ptt@corget.com. Before buying, they should provide you some test accounts first.
3. How to insert the SIM card.
The radio is Dust and Water resistance, so the SIM card slot is attached by screws .
Please remove the four uscrews, and remove the cover to insert the SIM card.
Corget platform introduction
The platform consist of agent& company platform, dispatcher and android app.These are used
to manage your radios, i.e. Group Assigning,
Monitoring, and smart phone application etc.
1)Countries have servers overview
2) Useful Links:
Agent platform manual download link：https://www.sendspace.com/file/th5iqg
Company platform manual download link: https://www.sendspace.com/file/ci7yjf
Android app 5.8.1：https://www.sendspace.com/file/2oo1nz
The App demo video: https://youtu.be/MSHw_qoRZbQ
The dispatcher download link: https://www.sendspace.com/file/rxo83v
The dispatcher manual link: https://www.sendspace.com/file/4jq466
Voice Recording, Network.