Quanta Computer 1KU2 1KU2 User Manual 1KU product spec

Quanta Computer Inc 1KU2 1KU product spec

manual

___________________________________________________________ UANTA COMPUTER INC. ___________________________________________________________ 1KU2 Product Specification Nov. 28th, 2011 Revision: 2B Issued By: Suya Hou Checked By: Claire Huang ___________________________________________________________________________ The release of this document is under controlled by the company. Any extra copy of this document must be written permission by the project manager. ___________________________________________________________________________ - Quanta Confidential -
UANTA COMPUTER INC. CNBU/1KU2 ________________________________________________________________________________________ ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 2 - Quanta Confidential - Document History: Vision Release By Date Note 2A Suya Hou 2011.11.25 First release 2B Suya Hou 2011.11.28 Add CE statement
UANTA COMPUTER INC. CNBU/1KU2 ________________________________________________________________________________________ ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 3 - Quanta Confidential - CONTENT 1. INTRODUCTION ...................................................................................... 4 1.1 RADIO FREQUENCY CONFIGURATIONS ....................................................................................... 4 2. MAIN FEATURES ..................................................................................... 4 3. MECHANICAL SPECIFICATIONS................................................................ 7 4. PERFORMANCE ....................................................................................... 7 4.1 RF SPECIFICATION ................................................................................................................. 7 4.2 ELECTRICAL SPECIFICATION ..................................................................................................... 8 4.2.1 Power Specification............................................................................................................................. 8 4.2.2 Pin Assignment .................................................................................................................................... 8 5. AT COMMAND ....................................................................................... 10 5.1 3GPP STANDARD AT COMMANDS......................................................................................... 10 6. FCC ........................................................................................................ 10 FCC ID: HFS1KU2 .................................................................................................................. 10 7. CE MARKING ......................................................................................... 10
UANTA COMPUTER INC. CNBU/1KU2 ________________________________________________________________________________________ ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 4 - Quanta Confidential - 1. Introduction 1KUx is a customized PCI Express Mini Card, which is developed on Qualcomm MDM9600/9200 platform and capable to provide various frequency configurations, support data operation on LTE, EVDO, HSUPA, HSDPA and WCDMA connectivity for portable and hand-held computers. 1.1 Radio Frequency Configurations The required radio frequency has been defined into 3 SKUs based on customer needs, 1KUx is a general definition of this embed module, precise name will be named as 1KU1, 1KU2 and 1KU3 in accordance with bands configuration. Due to limited space reserved for the module and Qualcomm’s chipset configuration, 3 SKUs have to be realized by leveraging 2 PCBs design. This PCI Express Mini Card is able to support UP TO Quad Bands in LTE/UMTS and Quad Bands in EDGE, GPRS, and GSM if required. Hence, the following SKU table will become as whole framework of product specification. Table 1-1 Quanta Model Name 1KU1 1KU2 1KU3 QCI P/N 211KUMB0070 211KUMB0050 211KUMB0060 Description LTE & CDMA HSPA+ Only LTE & HSPA+ HSPA+ X 850/900/1900/2100/AWS 850/1900/2100 LTE 700U X AWS/700D EVDO 800/ 1900 MHz X X PCB Design PCB-1 PCB-2 PCB-2 2. Main Features The following features set can be referred to 1KU1, 1KU2 and 1KU3, bands supported frequency depend on each SKU bands configuration. Features Items Descriptions Remarks Physical Outlook Dimension 35.18 x 30 x 4mm Weight 9 g Temperature Range Operation Temperature -10°C to +55°C Storage Temperature -20°C to +80°C DC Power Supply Supply Voltage 3.4~4.2V Interface Edge connector - 52 pins - 0.8 pitch - 0.5A rating current Host communication Alternative: - USB 2.0 - 8 bit SDIO at 1.8V
UANTA COMPUTER INC. CNBU/1KU2 ________________________________________________________________________________________ ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 5 - Quanta Confidential - SIM - (U)SIM 1.8V/3V - Class B/Class C Connection 2 Antenna W_FL connectors: - 1 Primary for WCDMA/HSPA/LTE/Cdma2000/EVDO - 1 auxiliary for HSPA/LTE/EVDO Rx diversity Communication ports at USB - 1 Modem port - 1 Diagnostic port - 1 AT command port - 1 NDIS interface CPU Baseband Processor Qualcomm MDM 9600/9200 600MHz - Application μP: ARM926-256MHz - SW/FW Processor: QDSP6 at up to 595 MHz PMIC PMIC 8028 Internal Memory - 64 MB DDR SDRAM internal stacked memory - 166 MHz maximum speed - 32-bit data width support - 1.8 V interface External Memory NAND Flash - 1Gb - 63-Ball FBGA (9 x 11 x 1.0 mm) - Operating voltage: 1.8V - Memory Density: 128M x 8 bit Radio UMTS Frequency - B1: UMTS-2100 (1920-1980MHz; 2110-2170MHz) - B2: UMTS-1900 (1850-1910MHz; 1930-1990MHz) - B4: UMTS-AWS (1710-1755MHz; 2110-2155MHz) - B8: UMTS-900 (880-915MHz; 925-960MHz) - B5: UMTS-850 (824-849MHz; 869-894MHz) Details refer to SKUs table EVDO Frequency - BC0:EVDO-800 (824-849MHz; 869-894MHz) - BC1:EVDO-1900(1850-1910MHz; 1930-1990MHz) Only request in SKU1 LTE Frequency - B13-700U (777-787MHz; 746-756MHz) - B17-700D (704-716MHz; 734-746MHz) - B4-AWS (1710-1755MHz;2110-2155MHz) UNABLE to support all LTE bands in one SKU RF System RTR8600 - UMTS/HSDPA/HSUPA 850/900/1900/2100/AWS Power class 3 (+24dBm) - LTE Power class 3 (+23 dBm) - CDMA/EVDO Power class 3(BC0/+23dBm) Power class 2(BC1/+23dBm) Rx Diversity Will differ according to each SKU: - EVDO 800/1900MHz - LTE 700U/700D/AWS - UMTS 850/900/1900/AWS/2100 Air Interface Features UMTS Rel.99 - Division Duplex: FDD - Peak PS data rate: 384 kbps UL/ 384 kbps DL
UANTA COMPUTER INC. CNBU/1KU2 ________________________________________________________________________________________ ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 6 - Quanta Confidential - HSDPA - Modulation: QPSK/ 16QAM - Support Category 6/8; - 7.2 Mbps/DL (Standalone); HSUPA - Modulation: QPSK/ 16QAM - Support Category 5/6 (2msec TTI)* - Up to 5.76 Mbps/UL (Standalone) HSPA+ - Rel 8 DL *  Dual carrier with 64 QAM, for up to 42 Mb/s support  2 × 2 MIMO with 64 QAM, for up to 42 Mb/s support - Rel7 DL  64 QAM, for up to 21 Mb/s support  2 × 2 MIMO with 16 QAM, for up to 28 Mb/s support - Up to 11.4Mbps/UL *: --Depends on Qualcomm support plan --Cat. 24 only support in 1KU2. LTE Rel 8 - 100 Mbps DL/50 Mbps UL (Cat 3, 10MHz) - 1.4 to 20 MHz RF bandwidth - 2 × 2 downlink SU-MIMO CDMA 1xEV-DO Rev B - 3.1Mbps DL/1.8 Mbps UL (Rev A) - 14.7 Mbps DL/5.4 Mbps UL (Rev B)* - Combines up to three carriers from within 10 MHz RF bandwidth *Rev B have not supported in Qualcomm SW drop yet Data Service Data Mode - CSD Rate Up to 9.6, 14.4 and 64kbps - DTE/DCE interface via USB 2.0 full speed - 3GPP 27.007 AT Command Set - 3GPP 27.005 Short Message
UANTA COMPUTER INC. CNBU/1KU2 ________________________________________________________________________________________ ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 7 - Quanta Confidential - 3. Mechanical Specifications 4. Performance 4.1 RF Specification Condition: Voltage @3.4 V and Temperatures: 25ﾟC Rx Conductive Sensitivity Band Typ. Max Unit 1 UMTS-850, 12.2 kbps, 0.1% -109 -104.7 dBm 2 UMTS-900, 12.2 kbps, 0.1% -106* -103.7 dBm 3 UMTS-AWS, 12.2 kbps, 0.1% -108* -106.7 dBm 4 UMTS-1900, 12.2 kbps, 0.1% -107 -104.7 dBm 5 UMTS-2100, 12.2 kbps, 0.1% -109 -106.7 dBm 6 CDMA2000-BC0(800MHz),FER<0.5% -107 -104 dBm 7 CDMA2000-BC1(1900MHz),FER<0.5% -107 -104 dBm 8 LTE-700U,QPSK,5MHz,>95% -100 -97 dBm 9 LTE-700D, QPSK,5MHz,>95% -100* -97 dBm 10 LTE-AWS, QPSK, 5MHz,>95% -103* -98 dBm *: These will be adjusted further. Tx Conductive Power Band Typ Min Unit 1 UMTS850/900/1900/2100/AWS 23 21 dBm 2 CDMA2000 24 23 dBm 3 LTE, Class3 23 21 dBm
UANTA COMPUTER INC. CNBU/1KU2 ________________________________________________________________________________________ ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 8 - Quanta Confidential - 4.2 Electrical Specification 4.2.1 Power Specification Name Pin Description Min Typ Max Unit VCC_VBAT 2, 24, 39, 41, 52 VCC power 3.4 3.8 4.2 V VCC_USIM/ 3.0V 8 USIM power output 3.0V 2.7 3 3.3 V VCC_USIM/ 1.8V 8 USIM power output 1.8V 1.62 1.8 1.98 V V_IH 1.8V Digital I/O input high voltage 1.62 1.8 1.98 V V_IL 1.8V Digital I/O input low voltage 0 0.1 0.45 V V_OH 1.8V Digital I/O output high voltage 1.62 1.8 1.98 V V_OL 1.8V Digital I/O output low voltage 0 0.1 0.45 V PERST_N 22 Hardware Reset (PU) -0.3 0 0.6 V 4.2.2 Pin Assignment Pin Name Power Level Description 1 POWER_ON_OFF 1.8V Modem power on/off 2 VCC_VBAT 4.2~3.4V Supply voltage for Modem 3 VREG_MSME_1V8 1.8V Supply voltage for JTAG function 4 GND GND 5 MDM_JTAG_PS_HOLD JTAG Function 6 WAKE_UP 1.8V Wake-up Modem 7 MDM_JTAG_RESET_N JTAG Function 8 VREG_RUIM1 1.8/3V SIM function 9 GND GND 10 UIM1_DATA SIM function 11 PA_state 1.8V Indicate 3G/LTE/EVDO PA state for coexistence 12 UIM1_CLK SIM function 13 (1)MDM_RTCK or (2)TCXO_GPS_EN (1)JTAG Function or (2)Enable the output of TCXO(19.2MHz) so as to be used by GPS of main system *Depends on system how to design 14 UIM1_RESET SIM function 15 GND GND 16 UIM1_DET Detection of SIM insertion/plug-out 17 (1)MDM_TCK or (2)TCXO_GPS (1)JTAG Function or (2)TCXO(19.2MHz) output for GPS of main system *Depends on system how to design 18 GND GND 19 MDM_TMS JTAG Function 20 Suspend 1.8V Trigger Modem to enter into sleep mode 21 GND GND 22 PM28_RESET_N Reset Modem
UANTA COMPUTER INC. CNBU/1KU2 ________________________________________________________________________________________ ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 9 - Quanta Confidential - 23 MDM_TDI JTAG Function 24 VCC_VBAT Supply voltage of Modem 25 MDM_TDO JTAG Function 26 GND GND 27 GND GND 28 SDC2_MDM_CLK SDIO CLK 29 GND GND 30 SDC2_MDM_CMD SDIO CMD 31 MDM_TRST_N JTAG Function 32 SDC2_MDM_D0 1.8V SDIO I/O interface 33 VBUS Supply voltage of USB(for R&D USB debug port) 34 GND GND 35 GND GND 36 USB_D- USB_D- 37 GND GND 38 USB_D+ USB_D+ 39 VCC_VBAT Supply voltage of Modem 40 GND GND 41 VCC_VBAT Supply voltage of Modem 42 (WWAN_LED) Indicate WWAN state for controlling LED of main system 43 GND GND 44 SDC2_MDM_D1 1.8V SDIO I/O interface 45 SDC2_MDM_D4 1.8V SDIO I/O interface 46 SDC2_MDM_D2 1.8V SDIO I/O interface 47 SDC2_MDM_D5 1.8V SDIO I/O interface 48 SDC2_MDM_D3 1.8V SDIO I/O interface 49 SDC2_MDM_D6 1.8V SDIO I/O interface 50 GND GND 51 SDC2_MDM_D7 1.8V SDIO I/O interface 52 VCC_VBAT Supply voltage of Modem
UANTA COMPUTER INC. CNBU/1KU2 ________________________________________________________________________________________ ____________________________________________________________________________ 1KU Product Specification Rev. 2B Page: 10 - Quanta Confidential - 5. AT Command 5.1 3GPP Standard AT Commands 1. AT command set for GSM Mobile Equipment (ME) can be downloaded from http://www.3gpp.org/ftp/Specs/html-info/0707.htm . 2. AT command set for User Equipment (UE) can be downloaded from http://www.3gpp.org/ftp/Specs/html-info/27007.htm . 6. FCC FCC ID: HFS1KU2 This module is complied to FCC requirement, all integrators have to be aware of the following information. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation of the device. Only those antennas with same type and lesser gain filed under this FCC ID number can be used with this device. The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter. Required end product labeling: Any device incorporating this module must include an external, visible, permanent marking or label which states “Contains FCC ID: HFS1KU2 7. CE Marking This device has been tested to and conforms to the regulatory requirements of the European Union and has attained CE Marking. The CE Mark is a conformity marking consisting of the letters “CE”. The CE Mark applies to products regulated by certain European health, safety and environmental protection legislation. The CE Mark is obligatory for products it applies to: the manufacturer affixes the marking in order to be allowed to sell his product in the European market. This product conforms to the essential requirements of the R&TTE directive 1999/5/EC in order to attain CE Marking. A notified body has determined that this device has properly demonstrated that the requirements of the directive have been met and has issued a favorable certificate of expert opinion. As such the device will bear the notified body number 0560 after the CE mark The CE Marking is not a quality mark. Foremost, it refers to the safety rather than to the quality of a product. Secondly, CE Marking is mandatory for the product it applies to, whereas most quality markings are voluntary. Marking: The product shall bear the CE mark, the notified body number(s) as depicted to the right. CE 0560.

Navigation menu