Quanta Computer A85CYKR VR controller User Manual

Quanta Computer Inc VR controller Users Manual

Users Manual

6/15/2017 Microsoft Confidential 1MOTION CONTROLLER MANUALDocument Version 1.0Distribution:Internal OnlyExternal AllExternal Restricted If restricted, specify restricted to whom:Quanta Computer Inc.CONTE NTSMotion controller requirements ..............................................................................................................2Motion controller layout .........................................................................................................................2First Run experience................................................................................................................................2Connecting Your controller .................................................................................................................2Before setup.................................................................................................................................... 3Pairing your controllers for the first time......................................................................................... 3Reconnecting after first pairing .......................................................................................................4Powering off controller ........................................................................................................................... 5Device Indicators..................................................................................................................................... 5Device Recovery ..................................................................................................................................... 5Updating Device firmware ......................................................................................................................6
Quanta Computer Inc.211, Wen Hwa 2nd Rd., Guishan Dist.,Tao Yuan City, Taiwan2MOTION C ONT ROLLER R EQUIR EMENTSMotion controller proper operation requires:- Windows Mixed Reality compatible PC- Windows Mixed Reality compatible Head Mounted Display (HMD)- Windows 10 creators update software releaseMOTION C ONT ROLLER LAYOU TFIRST RUN EXPERIENCECONNECTING YOUR CON TROLLERThe first run experience will guide the user through powering on and connecting the controller. It’s alsopossible to power on and connect the controller through the native Bluetooth page in WindowsSettings.
Quanta Computer Inc.211, Wen Hwa 2nd Rd., Guishan Dist.,Tao Yuan City, Taiwan3BEFORE S ETUPBefore pairing, you will need:•Two motion controllers.•Batteries for the controllers. Each controller takes two AA batteries.•A Bluetooth dongle (if your machine doesn't support Bluetooth).PAIRING YOUR CONTRO LLERS FOR THE FIRST T IME1. Choose one of the controllers to pair. We'll run through this process for each controller.2. Turn the controller on by pressing the Windows button for 2 seconds. You should see the LEDson the constellation flash and device vibrate, indicating that the device is on.3. Go to Settings -> Devices -> Bluetooth and other devices.4. Remove old controllers, if necessary. If you've already paired a different controller in the past,remove it by clicking on the controllerthat appears in the panel and choosing 'Remove Device'.5. Pairing Your Device1. Click Add Bluetooth or other device on the Settings menu.2. Choose Bluetooth3. Remove the battery cover.
Quanta Computer Inc.211, Wen Hwa 2nd Rd., Guishan Dist.,Tao Yuan City, Taiwan44. Press pairing button more than 3 seconds on one device.•The pairing button is located underneath the battery door next to the batteries.5. Device LED constellation will blink, indicating that device is in pairing mode. Device ison pairing mode 60 seconds at the time.6. You should see "Motion Controller - Left" or "Motion controller - Right" appear in theBluetooth menu.7. Select "Connect", device will make single vibrate when connected. Windows Bluetoothsettings should indicate state as 'Connected'.8. Replace the battery cover.9. Repeat these steps to pair the other motion controller.Device can be bonded with single host PC at the time.You can un-pair device by removing controller from Windows Bluetooth setting or setting the deviceagain into pairing mode.RECON NECT ING AF TER FI RST PA IRI NG•After device has been successfully paired with host, it will reconnect next time when poweredon.
Quanta Computer Inc.211, Wen Hwa 2nd Rd., Guishan Dist.,Tao Yuan City, Taiwan5P OW ERING OFF CON TR O LLER•Press Windows button for 4 seconds to power off the controller. The device will vibrate twiceand the LEDs will turn off.•If device is not tracked or it is motionless 30 seconds, controller will move to low power state tosave power, picking up controller or pressing button will wake up the device.•Your device will also automatically power off if there has not been motion for 10 minutes.DEVICE INDICA TORSMotion controller uses LED constellation ring and haptics for indicating about its state.ActivityTriggerIndicationPower on/off Windows button press LED goes on/off and device vibrates 2 timesIdle Controller not tracked by HMD ormotionless for 30 secondsLight blink slowly every 3 seconds to indicatethe device is in idle modePairing Pairing button press Lights slowly pulse when the device is inpairing modeConnect/Disconnect Controller connected or disconnectedto/from host PCDevice vibrates onceLow Battery Level During power on when battery levelis "Low"Lights blink twice when the device is turnedonCritical Battery Level During power on when battery levelis "Critical"Light will blink three times when turned on ifthe battery is critically low. It will then turnoff by itself.Device Update When firmware update started LED constellation has circular blinkingpatternDEVICE RECOVERYIf the controller isn’t working correctly and you’re unable to update the device, you can always restorethe device to factory conditions. To Recover your device:1. Power off device2. Open battery cover (Ensure you have good batteries when performing device recovery)3. Press pairing button4. Keep the pairing button pressed and power on the device by pressing home/Windows buttonfor 4 seconds5. Release both buttons and let the device power on, It’s ok if it takes a few seconds for it to turnon (there is no indication during device recovery process)
Quanta Computer Inc.211, Wen Hwa 2nd Rd., Guishan Dist.,Tao Yuan City, Taiwan66. Once the recovery is complete, you’ll need to pair the controller to your PC again7. After connecting with host and HMD device will update firmware to latest availableUPDATING DEVI CE FIRMWAREMotion controller firmware will be updated automatically when there is new firmware available throughWindows Update service.Firmware update will happen immediately after establishing connection with HMD and controllercannot be used during the update. Update duration depends on new firmware to be programmed and isindicated by illuminating LED constellation in circular blinking pattern.After update is completed device re-connects to host PC and is ready to use.
Quanta Computer Inc.211, Wen Hwa 2nd Rd., Guishan Dist.,Tao Yuan City, Taiwan7Federal Communication Commission Interference StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can be determinedby turning the equipment off and on, the user is encouraged to try to correct the interference by one ofthe following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.- Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate this equipment.Radiation Exposure Statement :The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environmentand are safe for intended operation as described in this manual. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Quanta Computer Inc.211, Wen Hwa 2nd Rd., Guishan Dist.,Tao Yuan City, Taiwan8BatteryThis product use non- chargeable AA battery 2 pcs per controller."Use only batteries listed in the user-instructions" .
Quanta Computer Inc.211, Wen Hwa 2nd Rd., Guishan Dist.,Tao Yuan City, Taiwan9Declaration of ConformityHereby, Quanta Computer Inc. declares that the radio equipment type A85 CyK is in compliance with,EMCD Directive: 2014/30/EU- EN 300 328 V2.1.1: 2016-11RED Directive 2014/53/EU- EN 301 489-1 V2.2.0 2017-03 (draft)- EN 301 489-17 V3.2.0 2017-03 (draft)- EN 55032:2015+AC:2016-07- EN 61000-4-2: 2009- EN 61000-4-3: 2006+ A1: 2008 + A2: 2010LVD Directive 2014/35/EU- EN 60950-1: 2006/ A11: 2009 / A1:2010 / A12: 2011 / A2: 2013Year to begin affixing CE marking 2017.Radio Type / Description Transmitter Frequency(MHz) Maximum Outut PowerBluetooth BR + EDR 2402 ~ 2480 12 dBm

Navigation menu