Quanta Computer C200 Clover Mobile WiFi User Manual
Quanta Computer Inc Clover Mobile WiFi
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2517810 |
| Application ID | n6eqxzG7mXKYTOdou6KegA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 23.49kB (293629 bits) |
| Date Submitted | 2015-01-29 00:00:00 |
| Date Available | 2015-07-28 00:00:00 |
| Creation Date | 2017-10-19 02:30:29 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-19 02:30:29 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS6 (Macintosh) |
Clover Mobile Feature Guide (v.10) English 1 2 Clover Mobile Feature Guide English Deutsch Español Français Italiano Nederlands Polski English 3 We are continuously improving our software. To see the latest version of this guide, visit clover.com/setup. In Europe, visit eu.clover.com/setup 4 Clover Mobile Feature Guide English 5 What’s Included Clover Mobile USB wall charger USB cable SIM door eject pin (only for 3G) About Clover Mobile Clover Clip 2 international plug adapters (Europe only) Nano SIM card tray (only for 3G) Optional Accessories Clover Mobile is a powerful Point of Sale device that goes wherever you want in your store (and beyond). Its integrated hardware lets you take payments, scan inventory, and run your day-today business operations where you choose. Whether it is in your hand or on the countertop or wall, Clover Mobile securely enables credit and debit card transactions via swipe (MSR), insert (EMV Chip), or tap (EMV Contactless). Clover Mobile is estimated to fully charge in (A) 5.5 hours via USB wall charger or (B) 4 hours via power adapter in Clover Mobile Dock. Clover Mobile Dock 6 Clover Mobile Feature Guide Clover Mobile Printer English 7 Get to Know Clover Mobile Set up your Clover Mobile Video set up: clover.com/setup Front (Europe: eu.clover.com/setup) Chip card reader Magnetic stripe card reader Front facing camera Plug USB wall charger into USB charger port and power source (only for 3G) Open SIM card tray using SIM door eject pin through the hole. Pick the SIM card tray size that matches with your SIM card. Place card on tray and push SIM door closed. Contactless payment reader Microphone A SIM card tray must always be inserted, even if you’re not using a SIM card. Press power button to turn on Clover Mobile Back Audio jack Power button Barcode scanner Back Barcode trigger USB charger port SIM card slot (only for 3G) Lanyard hook 8 Clover Mobile Feature Guide English 9 Hand Holding Position Payment Methods Chip Card Clover Mobile can be held in many ways. We recommend holding with your non-dominant hand (resting on your wrist) for optimal range of motion for card acceptance and precision tapping on the screen. For correct it, make sure your pointer inger is located on the barcode trigger. 1234 5678 9012 3456 1234 5678 9012 3456 34 5678 9012 3456 Recommended Usage Insert Card Side Tap Card 1234 5678 9012 3456 Top Magnetic Stripe Card 1234 5678 9012 3456 1234 5678 9012 3456 10 Clover Mobile Feature Guide 1234 5678 9012 3456 Swipe Card English 11 Table Placement Clover Clip Landscape orientation allows full range of motion for card acceptance. If your main use case is stationary on a table, it is recommended to pair your Clover Mobile with Clover Mobile Dock for added security. Slide Clover Clip into apron or pant pocket for convenience. Barcode Scanning Ensure you are in an app where scanning can be performed. Optimal range: 4-12 inches. 12 Clover Mobile Feature Guide English 13 Clover Mobile Scenarios Around Store Take card payments at the counter or around the store. Utilize the barcode scanner to manage your inventory: add new items, ind items, and update stock counts in the Inventory app. Applications Setup Wizard Let’s Get Started This is your guide for setting up Clover Mobile. Your activation code is in your welcome email. Home Quickly scan items by barcode to build an order in the Register app. Use your Clover Home screen for quick access to all your Clover apps. Employees can also log in and out from here. Outside Store Let customers split their bill and pay with credit or debit card securely in an outdoor setting. Take follow-on orders when customers are already seated. Take orders when the line goes out the door. 14 Clover Mobile Feature Guide App Market Custom Business Solutions Browse and install apps to it your store’s every need. English 15 Useful Resources Web Access Manage Your Apps Some apps allow you to access them via your web browser. We’ve put shortcuts to these web pages at clover.com/home. Please use Chrome, Safari, or Firefox. In Europe, visit eu.clover.com/home Need Help? Visit help.clover.com, use the Help app, or call us anytime at the phone number given in your welcome email. 16 Clover Mobile Feature Guide English 17 FCC Part 15 Industry Canada Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B) FCC Part 15 Class B-speciic Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. (Section title for this text????????) The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. • The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; • The maximum antenna gain permitted for devices in the bands 5250–5350 FCC Warning Changes or modiications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. FCC exposure limit compliance statement (SAR statement) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the speciic operating instructions for satisfying RF exposure compliance. MHz and 5470–5725 MHz shall comply with the e.i.r.p. limit; and • The maximum antenna gain permitted for devices in the band 5725–5825 MHz shall comply with the e.i.r.p. limits speciied for point-to-point and non point-to-point operation as appropriate. In addition, high-power radars are allocated as primary users (i.e. priority users) of the bands 5250–5350 MHz and 5650–5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. CE RF Exposure Compliance This device meets the EU requirements (1999/519/EC) and the International Commission on Non-Ionizing Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic ields by way of health protection. 18 Clover Mobile Feature Guide English 19 Clover Mobile Model: ----FCC ID: ------- EU Importer OmniPay Ltd Unit 9, Richview Oice Park, Clonskeagh, Dublin 14, Ireland Waste Electrical and Electronic Equipment-WEEE NOTE: This product is covered electronic equipment under the European Union’s Waste from Electrical and Electronic Equipment (“WEEE”) Directive(2012/19/EU). The WEEE Directive requires that covered equipment be collected and managed separately from typical household waste in all EU member states. Please follow the guidance of your local environmental authority or ask the shop where you purchased the product for collection or recycling options. 20 Clover Mobile Feature Guide
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2014:10:28 15:47:17-07:00 Creator : Adobe InDesign CS6 (Macintosh) Modify Date : 2015:01:27 18:22:34+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2015:01:27 18:22:34+08:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:054f2727-4e6e-4a27-9e50-0eca1fd0c02d Original Document ID : xmp.did:F77F117407206811822AB35FF8208EB3 Document ID : xmp.id:317C4AC4562168118083FE3680B1AC20 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:307C4AC4562168118083FE3680B1AC20 Derived From Document ID : xmp.did:A92D5E2D2B2068118083FE3680B1AC20 Derived From Original Document ID: xmp.did:F77F117407206811822AB35FF8208EB3 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2014:10:28 15:47:17-07:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 11EXIF Metadata provided by EXIF.tools