Quanta Computer C99 Wireless Charger User Manual TempConfidential Doc

Download:
Mirror Download [FCC.gov]
Document ID	3170302
Application ID	pA5zT7BTh+yT5XGgM8Zkbg==
Document Description	TempConfidential_Doc- User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	53.89kB (673593 bits)
Date Submitted	2016-10-20 00:00:00
Date Available	2017-04-19 00:00:00
Creation Date	2016-09-23 15:51:14
Producing Software	PDF-XChange Viewer [Version: 2.0 (Build 42.8) (Nov 9 2009; 18:19:58)]
Document Lastmod	2016-10-03 16:22:42
Document Title	TempConfidential_Doc- User Manual
Document Creator	Adobe InDesign CC 2014 (Windows)

Health and Safety Information
This section outlines the safety precautions associated with
using the device.
Important safety precautions
Please read the safety and operation instructions before using
your device or any accessories that came with it. Retain these
instructions for future use.
• Do not install your device in your vehicle or use it while
driving. Using your device while driving could put you and
others at greater risk of an accident causing serious injury,
Health and Safety Information
death, and property loss. You are responsible for knowing
and obeying the laws and regulations regarding the use of
wireless devices in the areas where you drive.
• Do not use your device or accessories near water (for
example, near a bathtub or a sink, in a wet basement, or near
a swimming pool) or spill liquid of any kind on your device or
accessories as this might cause a short circuit, a fire, or an
electric shock which could cause serious injury, death, and
property loss.
• Do not use your device in the presence of gas fumes as it
presents a risk of fire or explosion.
• Do not use or store your device in extreme temperatures as
your device might overheat and may present a burn and fire
risk and cease to function.
• Do not dispose of your device in a fire as this might cause an
explosion resulting in serious injury, death, and property loss.
• Fed e ra l Av i a t i o n A d m i n i s t ra t i o n ( FAA) and Federal
Communications Commission (FCC) regulations prohibit
using the radio of wireless devices while in the air. Turn off
all wireless connections on your device before boarding an
aircraft. Using your device on an aircraft might affect aircraft
instrumentation, communication, and performance; might
Health and Safety Information
disrupt the network; might otherwise be dangerous to the
operation of the aircraft, its crew, and its passengers; and
might be illegal.
• When listening to audio files using headphones, permanent
hearing loss might occur if headphones are used at a high
volume. Avoid increasing the volume of your headphones to
block out noisy surroundings. If you experience ringing in
your ears or muffled speech, consult a physician to have your
hearing checked.
• Do not disassemble your device. Your device contains small
parts that might be a choking hazard.
• Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
might not be shielded against the RF signals from your device.
Keep your device away from medical devices, including
pacemakers and hearing aids, as they might malfunction and
cause serious injury or death to you and others.
• Turn off all wireless connections on your device in health care
facilities when any regulations posted in these areas instruct
you to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
• Certain jurisdictions might prohibit or restrict your use of
Health and Safety Information
certain features on your device.
Additional safety guidelines
About charging
• Use only the charger supplied with your device. Use of
another type of charger will result in malfunction and/or
danger.
• Do not use the charger in a high moisture environment. Never
touch the charger when your hands or feet are wet.
• Allow adequate ventilation around the charger when using it
to operate the device or charge the battery. Do not cover the
charger with paper or other objects that will reduce cooling.
Do not use the charger while it is inside a carrying case.
• Connect the charger to a proper power source. The voltage
requirements are found on the product case and/or
packaging.
• Do not use the charger if the cord becomes damaged.
• Do not attempt to service the unit. There are no serviceable
parts inside. Replace the unit if it is damaged or exposed to
excess moisture.
Health and Safety Information
About the battery
This unit contains a non-replaceable internal Lithium
Ion battery. The battery can burst or explode, releasing
hazardous chemicals. To reduce the risk of fire or burns, do not
disassemble, crush, puncture, or dispose of in fire or water.
Important instructions (for service personnel only)
Caution: Risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to the instructions.
-- The battery must be recycled or disposed of properly.
-- Use the battery only in the specified equipment.
Caring for your device
Taking good care of your device will ensure trouble-free
operation and reduce the risk of damage to your device:
• Keep your device away from excessive moisture and extreme
temperatures.
• Do not place anything on top of your device or drop objects on
your device.
• Do not drop your device or subject it to severe shock.
• Do not subject your device to sudden and severe temperature
changes. This could cause moisture condensation inside the
Health and Safety Information
unit, which could damage your device. In the event of moisture
condensation, allow your device to dry out completely before
use.
• The screen surface can easily be scratched. Avoid touching it
with sharp objects. Non-adhesive generic screen protectors
designed specifically for use on portable devices with LCD
panels may be used to help protect the screen from minor
scratches.
• Never clean your device when it is turned on. Use a soft, lintfree cloth to wipe the screen and the exterior of your device.
• Do not use paper towels to clean the screen.
10
• N eve r a t t e m p t t o d i s a s s e m b l e , r e p a i r o r m a ke a n y
modifications to your device. Disassembly, modification or
any attempt at repair could cause damage to your device
and even bodily injury or property damage and will void any
warranty.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as your device, its parts
or accessories.
• Do not expose your device to extreme heat or direct sunlight
for prolonged periods. Overheating may damage your device.
• Do not use alcohol or any abrasive material when cleaning the
Health and Safety Information
11
accessories.
• Do not expose the accessories to extreme heat or direct
sunlight for prolonged periods.
• Store the accessories in a cool and dry place.
Federal Communication Commission Interference
Statement
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
12
interference that may cause undesired operation.
This device has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy, and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation if this equipment does cause harmful interference
Health and Safety Information
13
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
14
FCC Caution:
Any Changes or modifications not expressly approved by the
party responsible for compliance could void the user‘s authority
to operate the equipment.
The antenna(s) used for this transmitter must not be colocated or operating in conjunction with any other antenna or
transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
FOR PORTABLE DEVICE USAGE (<20cm from body/SAR needed)
Note: The country code selection is for non-US model only and
is not available to all US model. Per FCC regulation, all Wi-Fi
products marketed in US must fixed to US operation channels
Health and Safety Information
15
only.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure
to radio waves.
This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy
set by the Federal Communications Commission of the U.S.
Government.
The exposure standard for wireless device employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
16
The SAR limit set by the FCC is 4.0 W/kg. *Tests for SAR are
conducted using standard operating positions accepted by
the FCC with the device transmitting at its highest certified
power level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the actual
SAR level of the device while operating can be well below the
maximum value. This is because the device is designed to
operate at multiple power levels so as to use only the poser
required to reach the network. In general, the closer you are to
a wireless base station antenna, the lower the power output.
The highest SAR value for the model device as reported to the
Health and Safety Information
17
FCC when tested is 1.81 W/kg as described in this user guide.
While there may be differences between the SAR levels of
various devices and at various positions, they all meet the
government requirement.
The FCC has granted an Equipment Authorization for this model
device with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on this
model device is on file with the FCC and can be found under the
Display Grant section of www.fcc.gov/oet/ea/fccid.
For body worn operation, this device has been tested and meets
the FCC RF exposure guidelines for use with an accessory that
18
contains no metal and be positioned a minimum of 0 cm from
the body. Use of other accessories may not ensure compliance
with FCC RF exposure guidelines.
§15.19 (a)(3)
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Health and Safety Information
19
§15.21
Changes or modifications not expressly approved by the party
responsible for compliance could void the user‘s authority to
operate the equipment.
§15.105 (b)
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
20
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
Health and Safety Information
21
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
WEEE
This device must not be disposed of as normal household
waste, in accordance with the EU directive for waste electrical
and electronic equipment (WEEE - 2002/96/EC). Instead, it
should be disposed of by returning it to the point of sale, or to a
municipal recycling collection point.
22
Warranty Information
Warranty Period:
The manufacture warrants this device is free from defects in
material and workmanship under normal use and service for
twelve (12) months commencing upon the date of purchase by
the first consumer purchaser. If proof of purchase cannot be
provided, the manufacture date as recorded by manufacture
based upon the serial number will be deemed to be the start of
Warranty Period.
Warranty Information
23
Limited Warranty Statement:
The consumer should never attempt to open or disassemble
the device and doing so may cause damage that voids your
warranty.
The device is equipped with an internal rechargeable battery
that is non-removable.
This warranty does not cover defects
(1) R e s u l t i n g f r o m i m p r o p e r o r u n r e a s o n a b l e u s e o r
maintenance
(2) Failure to follow operating instructions; accident; excess
24
moisture; insects; lightning; power surges; connections to
improper voltage supply;
(3) Unauthorized alteration or modification of original
condition;
(4) Damages caused by inadequate packing or shipping
procedures;
(5) Devices purchased from unauthorized dealers.
During the warranty period, manufacture will, at its sole
option, (using new or refurbished replacement parts), repair
any defective devices. Repaired devices will be warranted for a
period equal to the remainder of the original Limited Warranty
Warranty Information
25
on the original device or for NINETY(90) days, whichever is
longer. All replaced parts, components, boards and equipment
shall become the property of manufacture.
The warranty is good only to the original purchaser of the
device during the warranty period as long as it is in the U.S.
Disclaimer of Warranties; Exclusion of Liability
Except as set forth in the express warranty contained on the
warranty page enclosed with the device, the purchaser takes
the device “AS IS”, and manufacture makes no express or implied
warranty or any kind whatsoever with respect to the product,
26
including but not limited to the merchantability of the product
or its fitness for any particular purpose or use; The design,
condition or quality of the device; The performance of the
product; The workmanship of the product or the components
contained therein; Or compliance of the product with the
requirements of any law, rule, specification or contract
pertaining thereto. Nothing contained in the instruction manual
shall be construed to create an express or implied warranty
of any kind whatsoever with respect to the device. In addition,
manufacture shall not be liable for any damages of any kind
resulting from the purchase or use of the device or arising from
Warranty Information
27
the breach of the express warranty, including incidental, special
or consequential damages, or loss of anticipated profits or
benefits.
Manufacture is not liable for performance issues or
incompatibilities caused by your editing of registry settings, or
your modification of operating system software.
Using custom operating system software may cause your
device and applications to work improperly. Your carrier may
not permit users to download certain software, such as custom
OS.
If your carrier prohibits this, if you attempt to download
28
software onto the device without authorization, you will be
notified on the screen that the device will no longer operate and
be instructed to power down the device. You must then contact
your carrier to restore the device to the carrier-authorized
settings.
Tech-Front (Shanghai) Computer Co., Ltd.
No 2, Lane 58, Sanzhang Road, Songjiang
Export Processing Zone, Shanghai, China, 201613
+86-21-37818268
Warranty Information
29
IEEE 1725 Battery Safety Statement
• Do not disassemble or open, crush, bend or deform, puncture
or shred.
• Do not modify or remanufacture, attempt to insert foreign
objects into the battery, immerse or expose to water or other
liquids, expose to fire, explosion or other hazard.
• Only use the battery for the system for which it is specified.
• Only use the battery with a charging system that has been
qualified with the system per this standard. Use of an
unqualified battery or charger may present a risk of fire,
30
explosion, leakage, or other hazard.
• Do not short circuit a battery or allowed metallic conductive
objects to contact battery terminals.
• Replace the battery only with another battery that has
been qualified with the system per this standard, IEEEStd-1725-2006. Use of an unqualified battery may present a
risk of fire, explosion, leakage or other hazard.
• Promptly dispose of used batteries in accordance with local
regulations.
• Battery usage by children should be supervised.
• Avoid dropping the phone or battery. If the phone or battery
Warranty Information
31
is dropped, especially on a hard surface, and the user suspects
damage, take it to a service center for inspection.
• Improper battery use may result in a fire, explosion or other
hazard.
• For those host devices that utilize a USB port as a charging
source, the host device’s user manual shall include a
statement that the phone shall only be connected to CTIA
certified adapters, products that bear the USB-IF logo
or products that have completed the USB- IF compliance
program.
32


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2016:09:23 15:51:14+08:00
Creator                         : Adobe InDesign CC 2014 (Windows)
Modify Date                     : 2016:10:03 16:22:42+08:00
Has XFA                         : No
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29
Metadata Date                   : 2016:10:03 16:22:42+08:00
Creator Tool                    : Adobe InDesign CC 2014 (Windows)
Instance ID                     : uuid:dc724aec-f92e-4354-aace-a7f0d03451b6
Original Document ID            : xmp.did:75d8d24d-b0ef-9647-ac0b-36b66b6a12da
Document ID                     : xmp.id:98070110-8a53-1b43-a528-9ec0134e0003
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:051e3f24-4e10-7345-9405-3d54199b241f
Derived From Document ID        : xmp.did:f5f5a3d5-957e-ff44-be82-13f509c5b3c3
Derived From Original Document ID: xmp.did:75d8d24d-b0ef-9647-ac0b-36b66b6a12da
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Windows)
History Changed                 : /
History When                    : 2016:09:23 15:51:14+08:00
Format                          : application/pdf
Trapped                         : False
Producer                        : PDF-XChange Viewer [Version: 2.0 (Build 42.8) (Nov  9 2009; 18:19:58)]
Page Count                      : 36

EXIF Metadata provided by EXIF.tools