Quanta Computer G50 PCS-GSM Cellular Phone User Manual users manual
Quanta Computer Inc PCS-GSM Cellular Phone users manual
User manual
Operating Instructions Digital Cellular Phone EB-G50 Before operating this equipment please read these instructions completely. FCC Regulations Conditions of Use Operation of this Panasonic mobile phone is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Panasonic mobile phone generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device on and off, the user is encouraged to try to correct the interference by one or more of the following measures: 1). Reorient or relocate the receiving antenna. 2). Increase the distance between the device and receiver. 3). Connect the device into an outlet on a circuit different from that to which the receiver is connected. 4). Consult the dealer or an experienced radio/TV technician for help. The radiated output power of this internal wireless radio is far below the FCC radio frequency exposure limits. Nevertheless, the wireless radio shall be used in such a manner that the radio is 1.5 cm or further from the human body. However, the user of wireless radios may be restricted in some places or situations, such as aboard airplanes. If you are unsure of restrictions, you are encouraged to ask for authorization before turning on the wireless radio. Several restrictions and cautions of using mobile phone are listed in the Important Information. FCC RF EXPOSURE INFORMATION Read this information before using your handset In August 1996 the Federal Communication Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. Body-worn Operation This device was tested for typical body-worn operations. To comply with FCC RF exposure requirements, a minimum separation distance of 1.5 cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with FCC RF exposure requirements and should be avoided. For more information about RF exposure, please visit the FCC website at www.fcc.gov Contents Important Information ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・i Care and Maintenance ii Quick Reference Location Of Controls Display Icons Getting Started Basic Operation Switching the Phone On/Off Making a Call International Dialling Answering a Call Ending a Call Emergency Calls Initially Setting the Time/Date Accessing the Phonebook to Dial Earpiece Volume Control SIM Lock Using the PIN Setting Alert Type Key Guard Phonebook Browsing Phonebook Creating a Number Grouping Phonebook Entries Reviewing the Phonebook 10 Hot Key Dial Numbers 10 My Numbers 10 Personalising Your Phone ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 10 Language 10 Changing the Ring Tones 11 Display Setting 12 Profile Mode 12 User Messages 12 Defaults 12 Own Menu 13 My Phonebook 13 Game (STK) 14 Text Messages 14 Setting the Phone for Short Text Messages 14 Setting the Message Centre Number 14 Creating a Text Message 15 T9 Text Input 16 Other Text Modes 16 Editing Text 17 Receiving Text Messages 17 User Messages 17 Review 17 Parameters 17 Broadcast 18 Key Guard 18 Browser 19 Browser Setting 19 Browser Menu 20 Phone Menu 20 Call Service 20 Diverting Calls 21 Restricting Calls 22 Network 22 Connectivity 22 Application 23 Game 23 (STK) 23 Schedule 23 Clock 23 Calculator 24 Currency 25 Melody Composer 25 Melody Manager Picture Manager Records Last Dialled Numbers and Redial Erase Records In Call Menu Holding Calls Call Waiting Hands Free Accepting/Rejecting a Second Call Conference Call Transfer Menu Structure Trouble Shooting WAP Settings Specifications 25 25 26 26 26 26 26 27 27 27 27 27 28 29 31 32 Important Information Safety Considerations The following information should be read and understood as it provides details which will enable you to operate your phone in a manner which is both safe to you and your environment, and conforms to any legal requirements regarding the use of cellular phones. This equipment should only be charged with an approved AC-adaptor (EB-CAD55xx*). Other usage will invalidate any approval given to this apparatus and may be dangerous. Ensure the voltage rating of the Fast Travel Charger is compatible with the area of use when travelling abroad. note: xx identifies charger region e.g. CN, EU, HK, UK, Use of Battery pack other than that recommended by the manufacturer may result in safety hazard Switch off your cellular phone when in an aircraft. The use of cellular phones in an aircraft may be dangerous to the operation of the aircraft, disrupt the cellular network and may be illegal. Failure to observe this instruction may lead to the suspension or denial of cellular phone services to the offender, or legal action or both. Do not incinerate or dispose of the battery as ordinary rubbish. The battery must be disposed of in accordance with local legislation and may be recycled. It is advised not to use the equipment at a refuelling point. Users are reminded to observe restrictions on the use of radio equipment in fuel depots, chemical plants or where blasting operations are in progress. Never expose the battery to extreme temperatures (in excess of 60°C) or charge the battery for much longer than recommended. Care must be taken when using the phone in close proximity to personal medical devices, such as pacemakers and hearing aids. Care and Maintenance Pressing any of the keys may produce a loud tone. Avoid holding the phone close to the ear while pressing the keys. Extreme temperatures may have a temporary effect on the operation of your phone. This is normal and does not indicate a fault. Do not modify or disassemble the equipment. There are no user serviceable parts. Do not subject the equipment to excessive vibration or shock. Avoid contact with liquids. If the equipment becomes wet immediately remove the power and contact your dealer. Do not leave the equipment in direct sunlight or a humid, dusty or hot area. Keep metallic items that may accidentally touch the terminals away from the equipment. Always charge the battery in a well ventilated area, not in direct sunlight, between +5°C and +35°C. It is not possible to recharge the battery if it is outside this temperature range. When disposing of any packing materials or old equipment check with your local authorities for information on recycling. ii Quick Reference -------------------------------- Quick Reference Location of Controls Receiver Soft Key Soft Navigation Key Key Phone Jack Display End Key Answer Key Charger Connection Special Character Keys Navigation Key: moving up and down through the options in the display area. In idle mode, pressing to enter Own Menu. Own Menu is a shortcut to access your favourite menus. You can set it in the Personalise. Perform the functions indicated by text shown on the LCD screen. In idle, long press left soft key to enter Messages, long press right soft key to enter Profile Mode List. Numeric key pads. Long Press to enter a “+” or “P”. When you need to dial an extension number, dial the phone number firstly then long press and enter the extension number. to add a “P” Make a call or answer a call. In idle mode, check the last dialled list. To end a call, return to idle mode, return to previous menu or reject an incoming call. Long press it to switch the phone on/off. In idle, long press to activate Browser. In idle, long press to switch the Mute Mode on and off. Display Icons Status Icons Main Display Left Hand Selection Area Status Icons Right Hand Selection Area The status icons are displayed or animated according to the currently activated functions. The Antenna, Signal and Battery icons are displayed when the handset is switched on and connected to a network. is displayed when you are registered to a non-home network – roaming. is displayed when call divert is enabled. is displayed when vibration alert is enabled. is displayed when all tones or ring volume is off. is displayed when an unread message is stored or lights when message area is full. is displayed when Phone Lock is enabled. indicates the voice mail icon. indicates the received signal strength. indicates the battery level: - low battery. indicates the alarm is set. Getting Started Removing the Battery Open the battery by moving the release-latch upward and remove the battery away. Please see the left pictures. Note: Before removing the battery, turn the phone off completely. Fitting the SIM The SIM is inserted into the back of the phone underneath the battery. Hold the phone in a horizontal position where the antenna is on your right hand side and slide the SIM into the slot, with the metal connectors facing down. Ensure that the bevelled corner is positioning in the top left corner. Please see pictures above. Fitting the Battery Locate the two lugs at the bottom of the battery into the back of the phone. Slightly push the battery and click into place. Please see the left picture. Charging the Battery Insert the charger into the base of the phone and connect the travel charger to the socket-outlet. Then the charger indicator bar will start scrolling. It is recommended to charge 4 hours before first use. Battery Level Indicator While charging Phone on Charging complete Phone off LCD Battery Indicator Off When charging is completed, disconnect the charger from the phone. Disconnecting the Fast Travel Charger Disconnect the charger from the main power supply. Pull downward charger plug to release it from the base of the phone. Please see the picture. Low Battery Warning When the battery power is low a warning tone will sound and a LOW BATTERY ( ) message will be displayed. If this occurs during conversation, finish your call immediately. The power will automatically shut off after the warning tone. Fully recharge the battery. (Calls can be made and received while the phone is charging). It is recommended that the battery is fully discharged to maintain an optimum battery life and performance. See “Charging the Battery” page 3. Basic Operation --------------------------------- Basic Operation Thank you for purchasing this Panasonic digital cellular phone. This phone is designed to operate on the GSM/GPRS triple band. Before operating this phone please read the ‘‘Important Information’’ section - see page i. Switching the Phone On/Off Be sure to insert the SIM card and battery beforehand. Long press to switch the phone on or off. Making a Call Ensure that the signal strength meter shows network coverage is available in the current area. Enter the area code > phone number > International Dialling Idle + Hold until ‘‘+’’ is displayed > Enter a country code > area code > phone number Note: Many countries / regions include an initial ‘’0’’ in the area code. This should, in most cases, be omitted when dialling international numbers. Answering a Call to answer a call or to reject the call. If a call is not answered, the number of incoming calls missed will be displayed. Ending a Call Press Emergency Calls To make an emergency call the antenna symbol must be presented. Enter 112 or if no SIM is fitted to the phone, press SOS to make an emergency call. Initially Setting the Time/Date You can set time and date displayed on the idle screen. Idle > Menu > Application > Clock > Clock Setting > Time & Date > Set to set time and date. Here is a step by step explanation for your reference. All instructions in this menu will be presented by symbol >.From Idle mode, press navigate Application, press Clock. Press press Menu and use Select and use to again to highlight Select and use cursor to highlight Clock Setting, Select and use to select Time & Date. Press and Set to the editing screen and use to move cursor to modify. You can choose the date and time format. Enter the digits for the date and time in the format you like. Enter the digits for the time using 24 hour clock. Press OK return to the previous page. Accessing the Phonebook to Dial You can access to the phonebook to browse or dial numbers. Idle > Names > (searching a name) > Earpiece Volume Control During a call, use to decrease or increase the volume. SIM Lock. Once you set this function with your SIM card in it, this phone can only recognize your SIM. When other SIM card inserts, the phone code is needed to enter. Idle > Menu > Phone Menu > Security > SIM Lock > Enter 4 – 8 digital phone code > OK > Set (select On or OFF) > OK. To set SIM Lock, set “Phone Code” in the Phone Lock menu. Using the PIN(4 to 8 digits) The PIN (Personal Identification Number) protects your SIM against unauthorized use. If you enable the PIN, every time the phone is turned on you will be prompted to enter the PIN. The PIN2 controls security for the Fixed Dial and Call Charge metering. If either PIN/PIN2 is entered incorrectly 3 times the phone will be locked and then you will need to enter the PUK/PUK2 code. Contact your service provider for the PUK/PUK2 code. Note: If the PUK/PUK2 code is entered incorrectly 10 times, the SIM will cease to operate permanently. All information sorted in the SIM will be lost and the SIM will need to be replaced. Contact your service provider for more details. Enabling/Disabling the PIN Once you enable the PIN, you have to enter the PIN whenever you switch the phone on. Idle > Menu > Phone Menu > Security > Codes > PIN Control > Enter PIN (Between 4 and 8 digits) > OK > Set (Select On or Off) > OK Setting Alert Type When required, the phone can be set up to vibrate or ring when a call is received. Idle > Menu > Personalise > Alert Type Choose one type from None, Ring & Vibration, Vibration only or Ring only. Key Guard This function can avoid you from pressing the keypad accidentally, such as in the packet or purse. Idle > Menu > Key Guard > Yes After that, there will be a shown on the idle display. Disable the Key Guard: Idle > Free > OK Phonebook -------------------------------------- Phonebook It is possible to store phone numbers in two locations: One is in the SIM Phonebook. The other one is in the Mobile Phonebook which means that if you change the SIM, the numbers in the phone will not lose. The Mobile Phonebook has an advantaged function that you can group your phonebook entries together. Details please see Creating a Number (3B) below. Browsing Phonebook You can browse SIM Phonebook and Mobile Phonebook. Idle > Menu > Phonebook > Browse > SIM Phonebook or Mobile Phonebook Search the name you wish to browse. If you browse SIM Phonebook, press Menu, then Edit, Delete, Copy to Mobile, Copy All to Mobile, Search will be shown. Also if you browse Mobile Phonebook, Copy to SIM, Search will be displayed. Creating a Number In Idle enter the numbers you would like to save and press Save There is another operation to create a number. Press Idle > Menu > Phonebook > Create > SIM Phonebook or Mobile Phonebook 3A Choosing SIM Phonebook 3A-1 Enter the Name --- see “Text Input” on page 15. Press downward to the next screen. 3A-2 Enter Phone numbers with numerical keys. Then press downward to the next screen. 10 3A-3 Select Location. You can choose a storing location in SIM or FDN by pressing Set. Press down arrow key to the next screen. 3A-4 Select Record No. You can choose a location record number by pressing Set. 3A-5 Press Save. 3B Choosing Mobile Phonebook 3B-1 Enter the Name --- see “Text Input” on page 15. Press down arrow key to the next screen. 3B-2 Enter the Phone number with numerical keys. Press downward to the next screen. 3B-3 Select a Group. You can locate phonebook members in different groups, such as Friends, Family etc., by pressing Set. 3B-4 Select Melodies. You can define a specific melody for each person. 3B-5 Press Save. Grouping Phonebook Entries The ability to group phonebook entries together such as: Friends, Colleague, Family, Others, VIP or No Group etc., you can define a specific melody for each group. In this case, once a member calls, you can tell that this call is coming from which group. Reviewing the Numbers from Groups You can only review and delete group members in this submenu. Members cannot be grouped here. 11 1 Idle > Menu > Phonebook > Group Setting Use to select a group View the Groups’ members or Delete the group members. Personalising Your Phone ---------------------If you haven’t grouped your phonebook, you will see List Empty. Reviewing the Ponebook The Review function in the phonebook menu shows how many locations are available in the Phonebook. From Idle > Menu > Phonebook > Review A summary of the Phonebooks will be displayed. Hot Key Dial Numbers It is a quick access to dial phone numbers from the SIM Phonebook. Long press any digit key from 1 – 9 to recall the first 9 numbers stored in the corresponding SIM location. To activate the Hot Key Dial, you need to switch on this function. Idle > Menu > Phonebook > Hot Key Dial > On/Off My Numbers My Numbers is a convenient part of Phonebook where voice, fax and data phone number(s) can be stored and viewed. This feature depends on the SIM card. Adding Numbers Idle > Menu > Phonebook > My Numbers > Menu > Edit > enter Phone Number > Save 12 Personalising Your Phone Language It is possible to change the language that the phone uses for both display messages and text entry. Idle > Menu > Personalise > Language > language) (select a preferred Changing the Ring Tones The ring tones and volumes of the phone can be changed to one of many pre-defined sounds. Alternatively you can use the Melody Composer to generate a custom ring tone. Idle > Menu > Personalise > Tones > Ring Type > (select a (select a preferred sound) preferred category) > Composing a Melody Idle > Menu > Personalise > Tones > Melody Composer > My Music ) > Melody Edit > (select (select track) Using the following table as a reference, enter the notes (from the choice of low, middle and high), rests, and the durations of each, to generate your composition. Key Func. C Rep. ˙ Rest Duration Low, Middle, High 13 If you want to attach the sub tracks, remember to save your earlier main track firstly and then press return to the previous page, then press to select Sub Track and start another editing. Once you finish the sub tracks edition, press Menu and Save. Press twice to jump to previous pages, and select Play to listen to your melody. After composing the melody, press Menu and you can choose a Tempo and Instruments. When the composition is complete save it. to Display Setting You can set Idle Screen、 Greeting、Animation、Contrast and Back Light. Greeting A personalised greeting can be programmed for when the phone is switching on. Idle > Menu > Personalise > Display Setting > Greeting > Edit Use the text entry to add a greeting- see ‘‘Text Input’’ page 16. Profile Mode In the Profile Mode, you can choose and customise an appropriate mode from Headset、Normal、Meeting、Noisy 14 Idle > Menu > Personalise > Profile Mode > Activate > OK (select a mode) > User Messages There are 10 pre-set common used messages for you to choose and there are 5 empty space for you to add. Press Select and all these messages can be edited. Idle > Menu > Personalise > User Messages > select a preferred entry Defaults Any personal settings can be returned to their factory default settings. Idle > Menu > Personalise > Defaults > Select > Yes Own Menu It is a shortcut access that you can tick on/off the following options: Browser, Game, Phonebook, Language, Alert Type, Tones, Idle Screen, Profile Mode, Alarm, Calculator, Schedule, Received List, Send Message, Clock Setting and Currency. Once these options are selected, you can access to the Own Menu selection from Idle by pressing My Phonebook Through this option, you can browse the phonebook name list. SIM Idle > Menu > Personalise > My Phonebook > Mobile However, you can choose Mobile Phonebook or SIM Phonebook in this menu after that when returning to Idle, press Names and you can browse the selected phonebook. 15 Game (STK)/ Text Messages -------------------- Game (STK) If SIM card provides SIM Tool Kit services, this menu will become the STK gateway. You can still access to game from Application. Idle > Menu > Game or Idle > Menu > Application > Game When you see the mouse, press Numerical key from 1 to 9 to hit the mouse with the highest speed. Keep in mind that the Cat is not your target. Example: if you pres 5, you will hit the thing hidden in the 5th hole. This game will end automatically within a limited period of time. After ending, you will get a score. This score might be the highest one in the record. Good luck! Text Messages It is possible to receive, display, edit and/or send text messages up to 760 characters (depending on characters or symbols). Setting the Phone for Short Text Messages Before a text can be sent, it is necessary to enter the Message centre number into Parameters (the Service Provider will supply the Message Centre number). The Message Centre number may have been pre-programmed on the SIM Setting the Message Centre Number 16 Idle > Menu > Messages > Parameters > Message Centre Enter message centre number in international dial form – see “International Dialling” page 5. Creating a Text Message Idle > Menu > Messages > Create Press numeric key repeatedly (if required) to enter and select characters, numbers or special symbols. to switch “Input Mode”. Press to turn T9 on/off. EMS (Enhanced Message Service) While editing the message, press Menu > Picture & Sound can insert/add pictures or sound into the message. However, only if the receiver’s mobile phone support this task. Use to choose the pictures you want to send and press Or press to select music. Please note that one message can only transmit 10 sounds. Once complete the message, press Menu to Send, Save or Save and Send. After select Send, enter the destination phone number or press Names to navigate. Then press OK to send. Text Mode (abc, ABC and Numeric) 1/( )< = >% ~ € & a b c 2 ä à ç or A B C 2 Ä d e f 3 é è or D E F 3 É g h i 4 ì or G H I 4 j k l 5 or J K L 5 m n o 6 ö ñ ò or M N O 6 Ö Ñ 17 p q r s 7 ß or P Q R S 7 t u v 8 ü ù or T U V 8 Ü w x y z 9 æ Ø å or W X Y Z 9 Æ Ø Å Space 0 . , ? ! + - : ¿ ¡ ” ’ ; _ * Γ ∆ Θ Λ Ξ Π Σ Φ Ψ Ω Long press: space # £ $ ¥ ¤ @ \ § Short press to turn T9 on or off. Switch Input Modes T9® Text Input Using this mode of text entry dramatically reduces the number of key presses required: Press a key once for any letter you require on that key. The desired letter may not be displayed. Continue pressing other keys until the end of a word is reached; then check that the word has been typed correctly before continuing on to the next word. If the combination of letters typed has produced a word which is not the one you require, press repeatedly until the correct word is displayed. Continue to the next word. If the word you require is not in the internal dictionary (i.e. It is a proper noun or a rarely used word) then it should be entered using the Normal (ABC) mode. Other Text Modes To access any of the other text entry modes use to switch through until the desired mode. When using Capital letter mode (ABC), number mode (123), etc., each time a key is pressed in quick succession it will display the next 18 character available on that key. Releasing the key, or pressing another key will enter the currently displayed character and the cursor will move to the next position. 19 Editing Text Long press will move cursor up or down one text line (or field in Phonebook). Pressing will move left or right one character. When the cursor is moved over a character and another key pressed this will insert the new character immediately before the selected character. Pressing Clear will delete the character to the left of the cursor. Receiving Text Messages When a Short Text Message is received completely, the message indicator will flash on the display, with an audible tone. Idle > Menu > Messages > Received List > Read to read the message. Use to navigate through the messages and to identify the sender and the time the message was sent. Note: If the message indicator is displayed, this means that the message area is full and you need to delete old messages in order to receive new messages. Reply, Forward, Edit and Delete a Message When a message is received, read the options and follow the prompts to create a reply and edit new message or forward, delete the message. User Messages Default messages can be chosen by you. To create or edit, please see “User Message” on Personalise page 10. Use to select. Idle > Menu > Messages > User Messages > select a preferred entry. Review Review allows you to check usage of the message area. Idle > Menu > Messages > Review 20 Parameters Idle > Menu > Messages > Parameters The following parameters can be set: Text Messages/Key Guard ---------------------Message Centre Enter or change the Message Centre’s number. Normally the number has already saved in the SIM, so you may not need to enter it again. Protocol The Message Centre may be able to convert the message to the format specified by the selected protocol. Lifetime This is the duration that your message is stored at the Message Centre. Delivery attempts will be repeated until the message has been delivered or life time expires. Report When your message has been delivered, a confirmation will be received. Broadcast You need to specify the ‘topic(s)’ of information and the language that you wish to receive as broadcasts and tick the “Broadcast” on before you can receive them. to Idle > Menu > Messages > Broadcast > Topic List > Current cycle through the available topics. To add new topics, select and select a preferred topic, or select User Defined to create a new topic. Note: This function should depend on the Network Service Operator. Key Guard 21 The Key Guard function is used to prevent any keys from being accidentally pressed e.g. when the phone is being carried. Idle > Menu > Key Guard > Select > Yes to enable “Key Guard” Emergency calls can still be made - see ‘‘Emergency Calls’’ page 6. Press 112 and Note: When making emergency calls with the ‘‘Key Guard’’ enabled, there will be no visual indication that the number is being dialled Browser ----------------------------------------- Disabling Key Guard When Free is displayed, press Free > OK. Browser The phone’s WAP (Wireless Application Protocol) Browser enables the you to access Internet services supported by the network, such as news, weather reports, sport etc. Browser Setting Before Internet services can be accessed, you need to subscribe to your network operator or Internet Service Provider (ISP) to enable the relevant configuration information. Please contact your network service provider to ensure that your network setting is right. Note: Modifying previously entered settings can cause failure of the Browser. Idle > Menu > Browser > Sever Setting There are two servers may be pre-set up on the phone, so use to select one of the server settings. Otherwise, you have to enter the essential data (Sever Name、IP Address、IP Port、Homepage、Select Mode、Linger Time、CSD Settings and GPRS Settings) by manual at the first time. 22 Those configuration parameters will be given by Network service provider. Once completing the entry, use Activate. to choose one of the setting then The first time that the browser is activated there will be no content stored so the Home URL content will be displayed (as defined by the network operator). The Home URL will be recalled from the cache, each time the browser is activated. (Cache is the phone’s memory that stores content downloaded in the past). Phone Menu ------------------------------------- Browser Menu Starting Browser Idle > Menu > Browser > Start Browser Once you have set and activated the browser setting, you can start browsing the Home page of network operator. Bookmarks Idle > Menu > Browser > Bookmarks In this menu, there are 10 empty places for you to enter the favourite websites. You can also Edit、Erase、Launch the website. Phone Menu Call Service Time/ Charges 23 Idle > Menu > Phone Menu > Call Service > Time/Charges Use select one of the functions: Last Call、All Voice Calls、Cost Left to Last Call function will display the duration and call charge, if available, of the last call. Times are indicated as: minutes (0-59) and seconds (0-59). All Voice Calls function displays the accumulated duration and call charge, including incoming and outgoing calls. Cost Left function will show the left units that you have set beforehand. (Please refer to Setting the Max Cost below ) Call Waiting Once you activate this function, you can receive a second call while talking. Idle > Menu > Phone Menu > Call Service > Call Waiting Call Identification In the Call Service menu, the Caller’s ID and Withhold ID functions allow you to check the status of whether a Caller’s Identification is seen. Idle > Menu > Phone Menu > Call Service > Withhold ID or Caller’s ID Note: When checking the status the phone must be registered with a network. Charge Settings Firstly, a price per unit must be entered. This is the cost that the Service Provider charges for one unit of call time. Idle > Menu > Phone Menu > Call Service > Charge Settings Edit the values. At this point you will be asked to enter your PIN2. Enter a currency unit. Setting the Maximum Cost This function allows you to pre - determine the maximum cost of calls made. Idle > Menu > Phone Menu > Call Service > Charge Settings > Max Cost Entry the maximum unit you want to set. At this point you will be 24 asked to enter your PIN2. Enter a value (number of units) which is to be the maximum permitted, and the corresponding cost will be displayed. Note: The duration of one unit may vary during the day, peak and offpeak times. Therefore, the call charge can be calculated accordingly. However, call charge information may not give an accurate reflection of the tariffs charged by your Service Provider. Diverting Calls Voice call can be diverted using different circumstances and to different numbers. For example you may wish voice calls to be diverted to voicemail box event that the phone is switched off. Idle > Menu > Phone Menu > Call Divert Use to select the circumstances that you wish to activate call diverts. Then enter phone number to divert to. ) is displayed. When a divert situation is enabled the divert icon ( When updating or checking the status of Call Divert the phone must be registered with a network. Restricting Calls Call Barring The “Call Bar” function is used to restrict certain outgoing and/or incoming calls. “Call Bar” is controlled by a security password that is supplied by the Service Provider. When updating or checking the status of Call Bar the phone must be registered with a network. Different Call Bar restrictions can be used for voice call. Any combination of call restrictions can be set. Idle > Menu > Phone Menu > Security > Call Bar Use to select the circumstances you need, then enter call bar password. Network Network setting enables you to change the network parameters. 25 Auto Network You can set “Auto Network” On or Off. New Network Once you set the “Auto Network” On: the phone will automatically search an available network for you. If you set it Off, you can select a network manually. Network List You can create and edit a network list according to your preferences. Band Select You can choose a network band: 900/1800, 900/1900, 900, 1800, 1900MHz. Connectivity You can check the transmission capacity and time. Also set GPRS setting and CSD setting (please refer to Browser Server Setting). 26 Application -------------------------------------- Application Game Idle > Menu > Application > Game Please refer to Page 14. Schedule The Schedule can be used to register reminders for personal events as well as planning holiday periods. Idle > Menu > Application > Schedule The Schedule can be presented as a weekly or monthly format. Use numerical keys 2, 4, 6, 8 to select a day. For the first time entry, highlight the date and press Agenda > Select > New entry. Choose a Type from Memo, Meeting Then press downward to add a Description Enter Start/ End Date and Time then press Save. 27 Clock This phone incorporates a clock with date/time, an alarm and a power off feature. Clock Setting Idle > Menu > Application > Clock > Clock Setting > Time & Date Press Select to set time and date. In the “Clock Setting” menu, you can choose to display the time in the idle mode or not. Idle > Menu > Application > Clock > Clock Setting > Display Time > On/Off Setting the Alarm Idle > Menu > Application > Clock > Alarm Press Set to set Time and choose a repeat format. Enter the digits with to leave. When the set time is reached, the 24 hour clock. Press alarm will sound. If the alarm is due during a call, an alarm indicator will display. Caution: Ensure that the setting of the Alarm will not contravene any regulations whereby it may automatically power on when in an aircraft or medical facility etc. - see ‘‘Important Information’’ page i. Setting a Power Off Time The phone can be set to turn itself off automatically at a specified time using the Power Off feature. The procedure for setting/adjusting the Power Off automatically is similar to the setting of Alarm. Calculator There are four arithmetic calculations enabling you to perform simple calculations (addition/subtraction/multiplication and division). Idle > Menu > Application > Calculator Enter a number (maximum 7 digits) and it will be displayed on the upper right of the display. If a decimal point is required press , if a minus sign is needed press 28 Use to select the arithmetic operation you need. Enter a number (maximum 7 digits) and press will be obtained. (=) then the result If is used to select another arithmetical operation to perform, an intermediate calculation will be performed and the result displayed on the upper line Currency The currency convertor enables the you to convert from/to a home currency using a conversion rate that you enter. Idle > Menu > Application > Currency Rate Setting Enter an exchange rate in the space where the pencil is. Press OK and Save. If a decimal point is required, then press Rate Computing Since you have saved the exchange rate, enter the numbers you want to convert and press Convert. Melody Composer Idle > Menu > Applications > Melody Composer Details please refer to Changing the Ring Tones on page 11. Melody Manager Check the list of melodies or downloaded melodies. Picture Manager You can find a list of predefined pictures, and also you can view, delete, rename, set the idle screen from the downloaded pictures. 29 Records/ In call Menu -------------------------- Records Last Dialled Numbers and Redial Recently dialled phone numbers will be stored in Last Dialled. If Caller Identification is known, caller’s phone number, for an answered call will be stored in the Answered menu and an unanswered call will be stored in the Unanswered menu. When the store is full the next phone number will overwrite the oldest. Idle > Menu > Records to view the Last Dialled、 Unanswered、 Answered. Use to target the phone number (or name) you wish to redial and press . Or in idle, press to view the last dialed numbers directly. You can modify, save or delete the phone number before dialling. Erase Records Idle > Menu > Records > Erase Records You can Erase All、Erase Last Dialled, Erase Answered, Erase Unanswered. In Call Menu During a call, there are several advanced functions, however; some of the in-call options are provided by network service provider. Holding Calls Holding a Call During a call, the display will show Menu and Hold. 30 1 Press Hold. “Call Held” displayed. Press back to retrieve the call. Call Waiting During a call, once a second call is coming, the display will show Reject and Swap Press Swap. Hold the first call.Talk to the second person. “Call Held” displayed. Press to select Swap to retrieve the call. Hands Free During a call, press Menu > Hands Free Then Hands Free will be activated. In this case, you can speak to the phone without holding it. Accepting/ Rejecting a Second Call A second call can be received, if “Call Waiting” is switched on. This is enabled from the Idle > Menu > Phone Menu > Call Service > Call Waiting. During a call: Press or to accept a call. The current call will be placed on hold. Press or to Reject. Conference A conference call enables three to be in conversation at the same time. During a call, press Menu > Conference Call Transfer When two calls are in use: During calls, press Menu and Use to select Call Transfer. The two calls will be connected to each other and your call will be ended. Note: Two calls transfer cannot be utilized while in Conference mode. 31 32 Menu Structure ----------------------------------- Menu Structure 1 Personalise Language Tones Ring Volume Ring Type Melody Composer Key Tone Warning Tone Display Setting Idle Screen Network Name Greeting Animation Contrast Backlight Colour Setting Alert Type Ring & Vibration Vibration Only Ring Only None Profile Mode Normal Meeting Noisy Headset User Messages Auto Answer Any Key Answer Defaults Own Menu My Phonebook SIM Mobile T9 Input 2 Game (STK) 3 Phonebook Browse Create Group Setting Friends Colleagues Family Others VIP Review My Numbers Hot Key Dial My Phonebook 4 Browser Start Browser Bookmarks Sever Setting 5 Key Guard 6 Messages Created Inbox Outbox Archive User Messages Review Parameters Broadcast 7 Phone Menu Call Service Time/Charges Call Waiting Withhold ID Caller's ID Charge Settings Phone line Call Divert All Voice Calls Not Reachable No Reply Busy Status Check Cancel All Security Call Bar Codes Fixed Dial SIM Lock Network Auto Network New Network Network List Band Select Connectivity GPRS info Bearer Setting 8 Applications Games (STK) Schedule Clock Clock Setting Alarm Power Off Time Calculator Currency Melody Composer Melody Manager Picture Manager 9 Records Last Dialled Answered Unanswered Erase Records 33 Trouble Shooting --------------------------------- Trouble Shooting Problem Phone will not switch on Extremely short battery life for a new battery Short battery life for an old battery The charging indicator does not light, the battery level indicator does not appear and the phone cannot be switched on when charging Battery fails to charge 34 Cause The network you are using and the condition of the battery can affect battery life The battery has worn out Remedy Check that the battery is fully charged and correctly connected to the phone Replace with a new fully charged battery The battery is not attached to the phone or when the battery has been deeply discharged the phone will take a short time until the indicator lights Leave the phone charging the battery for a few minutes before the indicator is lit and attempting to switch it on The battery is not attached to the phone Ensure the battery is fitted to the phone prior to commencing charging. Calls cannot be made Battery has been connected to the phone after AC adapter has been switch on The phone is locked Outgoing calls are barred The phone is not registered to a network Calls cannot be made from Fixed dial Store Calls cannot be received Emergency calls cannot be made Phone numbers cannot be recalled from phonebook The phone is not switched on Incoming calls are barred The phone is not registered to a network You are not in a GSM coverage area The phone is locked Ensure the battery is fitted to the phone prior to commencing charging. Unlock the phone Disable the outgoing call barring, or barred dial Move to a coverage area and operate your phone after it has registered with a network. Check your SIM supports Fixed Dial Check if the Fixed Dial is switched on Check the phone number is stored in the Fixed Dial Switch the phone on Switch the phone on. Disable the incoming call barring. Move to a coverage area and operate your phone after it has registered with a network. Check that the antenna symbol is display- move to a coverage area and operate your phone when antenna symbol is displayed Unlock the phone 35 Phone number has been restricted Switch off restriction WAP Settings Use the table below to record your WAP settings. Item Server Name Dial Number Call Type Login Name Password IP Address IP Port Homepage URL Linger Time 36 Current Setting Specifications Phone (Including Battery)* Type Temperature Range Charging Storage WAP Weight Dimensions Height x Width x Depth Supply Voltage Standby Time Talk Time Charging Time (Phone off) Antenna SIM Type GSM 900 Class 4 GSM1800 Class 1 GSM1900 Class 1 +5°C - +35°C -20°C - +60°C WAP 1.2.1 Max 65 g 77 x 43 x 16.9mm (excluding antenna) 720 mAh Li-ion 78.3 Hrs ~ 230 Hrs 1.6 Hrs ~ 7.9 Hrs Less than 120 mins (Travel Charger) External Stub Antenna 3V Plug-in only SIM Note: Charge time will be longer when the phone is turned on. Battery life is affected by the network being used, SIM card usage, and the condition of the battery. © Panasonic Mobile Communications Co., Ltd. 2003 Information in this document is subject to change without notice. No part of these instructions may be reproduced or transmitted in any form or by any 37 means without obtaining express permission from Panasonic Mobile Communications Co., Ltd. 38 39
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2003:07:16 10:32:27Z Modify Date : 2003:07:24 10:33:11+08:00 Page Count : 43 Creation Date : 2003:07:16 10:32:27Z Mod Date : 2003:07:24 10:33:11+08:00 Producer : Acrobat Distiller 5.0.5 (Windows) Author : ting Metadata Date : 2003:07:24 10:33:11+08:00 Creator : ting Title : Microsoft Word - users manual.doc Has XFA : NoEXIF Metadata provided by EXIF.tools