Quanta Computer IS3 Smart Phone User Manual Specification US

Quanta Computer Inc Smart Phone Specification US

User Manual

F-11D 1. Definition (適用This Document is based on the Fujitsu Low Tier Smart Phone product requirementFujitsu and apply to the IS3 (Swordfish) specification. IS3 is defined as a low tier Android smart phone for Japanese and Europe Markets. The RF interfaces for IS3 will include UMTS, WiFi and Bluetooth. The design platforms for IS3 are based oIce Cream Sandwich (ICS) version. 2. Basic Specification ( 2.1 ID, Outlook and Form Factor Light Sensor 11D Specification適用) This Document is based on the Fujitsu Low Tier Smart Phone product requirementFujitsu and apply to the IS3 (Swordfish) specification. IS3 is defined as a low tier Android smart phone for Japanese and Europe Markets. The RF interfaces for IS3 will include UMTS, WiFi and Bluetooth. The design platforms for IS3 are based on Qualcomm 8255A-0 and Google Android OS Ice Cream Sandwich (ICS) version. 2. Basic Specification (基本仕様) ID, Outlook and Form Factor Specification This Document is based on the Fujitsu Low Tier Smart Phone product requirement1 provided by Fujitsu and apply to the IS3 (Swordfish) specification. IS3 is defined as a low tier Android smart phone for Japanese and Europe Markets. The RF interfaces for IS3 will include UMTS, WiFi and 0 and Google Android OS
Form Factor Bar type Target weight 124 g Dimensions 119.4mm(L) x 60mm(W) x 10.85mm(T) Product Cubage 77.7 cc 2.2 System Temperature and Humidity 1) Operating temperature/Humidity -5~45 degree C / 0~80 %RH 2) Storage Temperature / Humidity -25~70 degree C / 0~90 %RH 3) RF portion* operating temperature -10~55 degree C 2.3 Hardware Specification (ハードウェアハードウェアハードウェアハードウェア仕仕仕仕様様様様) Item Specification CPU Qualcomm MSM8255A-0 SoC, CorTex A8 core The CPU clock speed is running up to 1 GHz. MCP 4 GB eMMC, On board 1 GB LPDDR2 DRAM, 400MHz, PoP Display 3.7” LCD 16.7M color depth, WVGA (800x480) resolution Touch Panel Capacitive type flat panel, 5 points multi-touch SIM Standard ETSI TS 102 221 SIM interface WLAN Broadcom WiFi Chip BCM4330 Module, support 802.11 b/g/n with the following functions supported  Mobile hotspot  AOSS  WiFi Direct  WPS mode BT Broadcom BCM4330 module, support BT3.0
FM Transmitter FM transmitter frequency: 77.4MHz ~ 85MHz USB  USB 2.0 FS/HS client  Micro-B type connector  For both Data Sync and power charging (Earphone will be sell with EUT and EU market) Sensors* Accelerator Compass Proximity (On: 2cm / Off: 2.5cm) Ambient light sensor Lux Brightness 0Lx～50Lx 25cd/m^2～105cd/m^2 150Lx～300Lx 54cd/m^2～200cd/m^2 80～100cd/m^2 700Lx～750Lx more than 100cd/m^2 IrDA (Operation Degree: 20cm/30 deg) Speaker 0.5 Watt Earphone Stereo earphone set supported with insertion detection (Earphone will be sell with EUT and EU market) Receiver 10mWatt Based on JIS C5532 Camera 5Mp AF CMOS camera on the back side. GPS Supported A-GPS Supported Vibrator Yes LED LED 3 color LED supported (blue, green, red) Battery Lithium Ion type with 1520 mAh Waterproof IPX7, IPX8 (1.5m) 2.4 Radio Interface Specification 2.4.1 Main Interfaces (Preliminary) Features Description Notes Frequency GSM-850 (824-849MHz; 869 – 894MHz). PCS-1900 (1850-1910MHz; 1930 – 1990MHz) WCDMA 826.4-846.6MHz
RF system MSM8255A-0+QTR8615 UMTS/HSDPA 800/1700/2100 PMIC PM8058 Tele Service Coding Type AMR-NB, FR, EFR, HR, AMR-WB GSM Voice Feature Support MT/MO call Emergency call Ciphering A5/1, A5/3 Circuit-switching data 9.6 kbps, 14.4 kbps, 64kbps(for VT supported) GPRS DTM operation Simple Class A Terminal Class Class 12 (4Rx + 4Tx, max:5) Service Class Class B Coding Scheme CS1, CS2, CS3 and CS4 Ciphering GEA1, GEA2, GEA3 Power Control GSM05.08 Sec. 4 Point to Point Supported Multiple PDP 3 Primary PDP contexts 2 Secondary PDP contexts UMTS rel.99 Division Duplex FDD Peak PS data rate 384 kbps UL/ 384 kbps DL Peak CS data rate 64 kbps UL/ 64 kbps DL (64/14.4/9.6 kbps) HSDPA HS-DSCH channel Max 10ch Modulation QPSK/ 16QAM Category Support HSDPA Category 6/8; Peak Rate 7.2 Mbps/DL (Standalone); Up to 384K bps/UL Modulation 16QAM, QPSK Logical Channels HS-SCCH (up to 4 simultaneously) HS-DPCCH HS-PDSCH – up to 10 channels Data Service Data mode CSD Rate Up to 9.6, 14.4 and 64kbps DTE/DCE interface via USB 2.0 full speed 3GPP 27.007 AT Command Set
3GPP 27.005 Short Message SMS SMS Class 0, 1 and 2 GSM TS7.05 / Short Message MT/MO GPS gpsOne® Gen 6 Engine support, C/No Avg 37 dB/Hz 2.5.2 Full Feature Set (Preliminary) Features Description Notes Vocoder Supported Frequency Band GSM 850 PCS 1900 UMTS 2100/1700/800 Automatic Mode Manual band selection GPRS Class B Class 12 (4Tx, 2Rx, max:5) CS1, CS2, CS3 and CS4 Launch the application with GPRS DTMF Supported Mute Supported AMR audio for multimedia usage Supported Short Message Service Mobile-Originated (SMS MO) Features Description Notes SMS MO in UCS2 format See UCS2 section for details Last TP-MR Special data field in the SIM where the last message reference used is stored. This data field ensures that the references are unique. Message Service via GPRS (MO) depends on carrier service Read and send during voice call Support Read and send during data connection is active Support
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. 4444RF Exposure Information (SAR)RF Exposure Information (SAR)RF Exposure Information (SAR)RF Exposure Information (SAR) This mobile phone meets the government’s requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is 0.835 W/kg and when worn on the body, as described in this user guide, is 0.898 W/kg (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements.) While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: HFS-IS3. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and that positions the handset a minimum of 1 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do no t use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 1 cm from your body when the phone is switched on.

Navigation menu