Quanta Computer K72A MID User Manual Quanta quick guide English 252 251 245 2731x

Download:
Mirror Download [FCC.gov]
Document ID	2886990
Application ID	LelFe3f4zo0UUdSYnc84Ng==
Document Description	TempConfidential_[STC]Quanta quick guide_English_20160125
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	157.69kB (1971105 bits)
Date Submitted	2016-01-28 00:00:00
Date Available	2016-07-25 00:00:00
Creation Date	2016-01-25 16:01:39
Producing Software	GPL Ghostscript 8.64
Document Lastmod	2016-01-25 08:01:42
Document Title	(Microsoft Word - Quanta quick guide_English_\252\251\245\2731.docx)
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Seven_Chen

Quanta Computer Inc.
Quanta K72A device Quick Guide
Quanta K7** Quick Guide
Package contents
The K72A device have included below items when opened the carton packing. Please make sure that you have
received all of contents before device installing.
K72A unit x 1
Power cord x 1
Clean cloth x 1
Quick guide paper x 1
Installing K72A
1.
2.
Model No: K7**(* can be 0-9，
，A-Z or Blank)
Quick Guide release version: 01
Quick Guide release date: 20151201
Connect power cord and LAN cable to K72A as illustrated below. Press power button to power on K72A.
When powered on, the power LED on power button will turn blue light.
Please make sure the LAN cable is connected and works well. When powered on, you can see the requests
of Google register setting on the screen. Before device operation, you need to finish the Setup installing.
Figure1 K72A unit back side
Quanta Computer Inc.
Getting to know K72A
 Front side introduction
1.
2.
3.
4.
5.
On the top off panel area, there is a hole for microphone function.
There is a camera module in the middle of Top panel area.
Volume keys
Use volume up and down keys to adjust the volume.
Home/wake-up key
Press the home key to wake up K72A from standby mode and go back to K72A home page.
LED light for apps indication
Figure 3
Figure 2
Back side introduction
1.
2.
Camera tilt knob
K72A camera only support tilt function
function.. Adjust view angle upward or downward with the adjust knob on
the back of the camera.
AC in/SD card slot/AC power jack/USB/LAN/Power button were displayed at I/O plate on
o the back of device.
3.
HDMI port and USB Jack port *2 are exclusive option.
Initial Setup
Set K72A
1. When the device is powered on, you will enter
nter the initial
initia set-up screen in the beginning. Cho
hoose your
language and then press “Start” key for next step.
Quanta Computer Inc.
2.
3.
Select your “Wi-Fi” item or you can sskip it and set up in the future.
6.
You can finish “Sign in” settings at this step.
7.
Please set up you Date & time.
time
If you have Google account, you can fill in data at this step. Or you can choose “NO” item for next step.
4.
If you do not have Google account, you can get an account now. Or you can choose “Not now” to skip.
8.
Type in your
name or keep empty for next step.
5.
Please finish “Google & location”” settings at this step.
9.
Press next step for confirming
confirm “Google services””
Quanta Computer Inc.
How to use K72A
1. When you see this screen picture, press “OK” to enter home screen for further operations.
10. Press “Finish” to complete device initial Setup process. Congratulation,, you have just finished K72A device
initial Setup process. Now, you can start to enjoy the entertainments which were brought from K72A
device.
2.
This is the default home screen figure
3.
When you want to find other installed apps, you
ou can press the
apps icon to enter APPS screen.
Quanta Computer Inc.
4.
This is APPS screen. You can search for all Apps item
items in this screen.
5.
WIDGETS screen
6.
8.
When you want to find the recent apps which visited before,
before you can press “Recent” Key.
9.
You can press
this icon to enter more settings.
setting
You can press “Back” Key to return last action during the operations.
10. You can find “WIRELESS
WIRELESS & NETWROKS/DEVICE/PERSONAL”
NETWROKS/DEVICE/PERSONAL settings on the screen and adjust your settings.
7.
When you are in other operation
operations screen, you can also press “Home” Key to return Home screen.
screen
Quanta Computer Inc.
K72A device spec list
Impedance : 4 Ω
Fo = 140±28 Hz
Frequency : Fo~20k Hz
K72A
SPL = 77±3dB@1W,1Meter
CPU
System Memory
Embedded Storage
LCD
Touchscreen
Rockchip RK3188 ,Quad-core Cortex A9 1.6G
Omnidirectional analog x1
DDR3, 2G Bytes
e-MMC 16G Bytes
Sensitivity : -32dB±3
Internal Mic
Output impedance : 2.2k Ω
15.6” TFT LCD N156BGE-E32 with LED Backlight unit, 1366 x 768, eDP I/F
Fortrend 15.6" CAP touch panel, 10 point multi-touch
Frequency: 100 ~ 20k Hz
AC to DC Power Module
USB x1 (2.0)
USB x2 (2.0) (replaced with HDMI-in x1)
I/O ports
Embedded; 19V/1.58A
Power Switch x1 with blue LED on rear I/O
Button/Switch
Call button with capacitive switch on front panel
micro-USB x1 (OTG)
Volume key (up/down) with capacitive switch on front panel
HDMI-in x1 (replaced with USB x2)
Call button Light(White)
Ethernet RJ45 x1
Indicators
micro-SD x1
Power-on Light(Blue)
Breath Light(Blue/Green/Orange)
PWR Keyx1
3.5mm Headset Jack x1
Power Jack x1
WiFi
802.11b/g/n
Bluetooth 4.0, Compatible with BT3.0, BT2.1+ EDR. Not support Bluetooth
Bluetooth
NFC
3.0HS.
NFC reader
Micro SD
Card Reader
Compatible with SD3.0, MMC ver4.41
Max. Capacity: 64G Bytes
G-sensor x1
Sensor
Light Sensor x1
CMOS 1/3.2" Sensor OV5680
5M (2592 x 1944), auto-focused
Camera
Up-Down Tilt
Output image format: H.264, VP8, MJPG, YUV
Frame rate: 30fps
Audio Codec
Realtek ALC5639
Class D Amp
TI TPA3113D2PWPR
Speaker
Speaker (L/R) 5 Watt x2
Power
Input 100~240V~1.1A, 50/60Hz
Quanta Computer Inc.
SAFETY STATEMENT
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
CE Marking
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
This device has been tested to and conforms to the regulatory requirements of the European Union and
has attained CE Marking. The CE Mark is a conformity marking consisting of the letters “CE”. The CE
Mark applies to products regulated by certain European health, safety and environmental protection
legislation. The CE Mark is obligatory for products it applies to: the manufacturer affixes the marking in
order to be allowed to sell his product in the European market.
This product conforms to the essential requirements of the R&TTE directive 1999/5/EC in order to attain
CE Marking.
The CE Marking is not a quality mark. Foremost, it refers to the safety rather than to the quality of a
product. Secondly, CE Marking is mandatory for the product it applies to, whereas most quality markings
are voluntary.
Marking: The product shall bear the CE mark.
1) this device may not cause harmful interference and
2) this device must accept any interference received, including interference that may cause undesired
operation of the device.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your body.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian ICES-003 and RSS-247.
Federal Communications Commission (FCC) Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for
may cause undesired operation of the device.
compliance could void the user’s authority to operate the equipment.
The computers employ low gain integral antennas that do not emit RF field in excess of Health Canada limits for the general
Exposure of humans to RF fields (RSS-102)
population; consult Safety Code 6, obtainable from Health Canada's Web site at http://www.hc-sc.gc.ca/
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device,
The radiated energy from the antennas connected to the wireless adapters conforms to the IC limit of the RF exposure requirement
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
Cet appareil numérique de classe B est conforme à la norme NMB-003 et RSS-247.
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Conformité des appareils de radiocommunication aux limites d'exposition humaine aux radiofréquences (CNR-102)
regarding IC RSS-102, Issue 5.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence.L'exploitation
est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage adioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
L'ordinateur utilise des antennes intégrales à faible gain qui n'émettent pas un champ électromagnétique supérieur aux normes
imposées par Santé Canada pour la population. Consultez le Code de sécurité 6 sur le site Internet de Santé Canada à
l'adresse suivante : http://www.hc-sc.gc.ca/
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
L'énergie émise par les antennes reliées aux cartes sans fil respecte la limite d'exposition aux radiofréquences telle que définie
par Industrie Canada dans ldu document CNR-102, version 5.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 7
Create Date                     : 2016:01:25 16:01:39+08:00
Title                           : (Microsoft Word - Quanta quick guide_English_\252\251\245\2731.docx)
Producer                        : GPL Ghostscript 8.64
Author                          : Seven_Chen
Creator                         : PScript5.dll Version 5.2.2
Modify Date                     : 2016:01:25 08:01:42Z

EXIF Metadata provided by EXIF.tools